Tailoring the Interface in FAPbI3 Planar Perovskite Solar Cells by Imidazole-Graphene-Quantum-Dots

Organic–inorganic hybrid perovskites have reached an unprecedented high efficiency in photovoltaic applications, which makes the commercialization of perovskite solar cells (PSCs) possible. In the past several years, particular attention has been paid to the stability of PSC devices, which is a critical issue for becoming a practical photovoltaic technology. In particular, the interface-induced degradation of perovskites should be the dominant factor causing poor stability. Here, imidazole bromide functionalized graphene quantum dots (I-GQDs) are demonstrated to regulate the interface between the electron transport layer (ETL) and formamidinium lead iodide (FAPbI₃) perovskite layer. The incorporation of I-GQDs not only reduces the interface defects for achieving a better energy level alignment between ETL and perovskite, but also improves the film quality of FAPbI₃ perovskite including enlarged grain size, lower trap density, and a longer carrier lifetime. Consequently, the planar FAPbI₃ PSCs with I-GQDs regulation achieve a high efficiency of 22.37% with enhanced long-term stability.     

Room‐Temperature Partial Conversion of α‐FAPbI3 Perovskite Phase via PbI2 Solvation Enables High‐Performance Solar Cells

The two‐step conversion process consisting of metal halide deposition followed by conversion to hybrid perovskite has been successfully applied toward producing high‐quality solar cells of the archetypal MAPbI₃ hybrid perovskite, but the conversion of other halide perovskites, such as the lower bandgap FAPbI₃, is more challenging and tends to be hampered by the formation of hexagonal nonperovskite polymorph of FAPbI₃, requiring Cs addition and/or extensive thermal annealing. Here, an efficient room‐temperature conversion route of PbI₂ into the α‐FAPbI₃ perovskite phase without the use of cesium is demonstrated. Using in situ grazing incidence wide‐angle X‐ray scattering (GIWAXS) and quartz crystal microbalance with dissipation (QCM‐D), the conversion behaviors of the PbI₂ precursor from its different states are compared. α‐FAPbI₃ forms spontaneously and efficiently at room temperature from P₂ (ordered solvated polymorphs with DMF) without hexagonal phase formation and leads to complete conversion after thermal annealing. The average power conversion efficiency (PCE) of the fabricated solar cells is greatly improved from 16.0(±0.32)% (conversion from annealed PbI₂) to 17.23(±0.28)% (from solvated PbI₂) with a champion device PCE > 18% due to reduction of carrier recombination rate. This work provides new design rules toward the room‐temperature phase transformation and processing of hybrid perovskite films based on FA⁺ cation without the need for Cs⁺ or mixed halide formulation.     

FAPbI3‐Based Perovskite Solar Cells Employing Hexyl‐Based Ionic Liquid with an Efficiency Over 20% and Excellent Long‐Term Stability

Formamidinium lead triiodide (FAPbI₃)‐based perovskite materials are of interest for photovoltaics in view of their close‐to‐ideal bandgap, allowing absorption of photons over a broad solar spectrum. However, FAPbI₃‐based materials suffer from a notorious phase transition from the photoactive black phase (α‐FAPbI₃) to nonperovskite yellow phase (δ‐FAPbI₃) under ambient conditions. This transition dramatically reduces light absorbtion, thus, degrading the photovoltaic performance and stability of ensuring solar cells. In this study, 1‐hexyl‐3‐methylimidazolium iodide (HMII) ionic liquid (IL) is employed as an additive for the first time in FAPbI₃ perovskite to overcome the above‐mentioned issues. HMII incorporation facilitates the grain coarsening of FAPbI₃ crystal owing to its high‐polarity and high‐boiling point, which yields liquid domains between neighboring grains to reduce the activation energy of the grain‐boundary migration. As a result, the FAPbI₃ active layer exhibits micron‐sized grains with substantially suppressed parasitic traps with an Urbach energy reduced by 2 meV. Hence, the resulting perovskite solar cell achieves an efficiency of 20.6% with notable increase in open circuit voltage (V_OC) of 80 mV compared with HMII‐free cells (17.1%). More importantly, the HMII‐doped FAPbI₃‐based cells show a striking enhancement in shelf‐stability under high humidity and thermal stress, retaining >80% of their initial efficiencies at 60 ± 10% relative humidity and ≈95% at 65 °C.     

Quantum Junction Solar Cells: Development and Prospects

Nanocrystals, called semiconductor quantum dots (QDs), contain excitons that are three-dimensionally bound. QDs exhibit a discontinuous electronic energy level structure that is similar to that of atoms and exhibit a distinct quantum confinement effect. As a result, QDs have unique electrical, optical, and physical characteristics that can be used in a variety of optoelectronic device applications, including solar cells. In this review article, the stable and controllable synthesis of QD materials is outlined for upscaling solar cells, including material development and device performance enhancement. It includes a systematic variety of device structures for the fabrication of solar cells, such as QD, hybrid QD/organic, hybrid QD/inorganic, perovskite QD, and hybrid 2D MXene QD/perovskite. The mechanisms for the improvement of stability by QD treatment are examined. For example, the 2D MXene QD and/or Cu_1.8S nanocrystal doping significantly increases the long-term light and ambient stability of perovskite solar cells, resulting from improved perovskite crystallization, reduced hole transport layer (HTL) aggregation and crystallization of films, and reduced UV-induced photocatalytic activity of the electron transport layer (ETL). For the advancement of QD solar cells and their interaction with various materials, the conclusions from this review are crucial. Finally, future prospects for the development of QD solar cells as well as current challenges are discussed.     

Inorganic Rubidium Cation as an Enhancer for Photovoltaic Performance and Moisture Stability of HC(NH2)2PbI3 Perovskite Solar Cells

Perovskite solar cells (PSCs) based on organic monovalent cation (methylammonium or formamidinium) have shown excellent optoelectronic properties with high efficiencies above 22%, threatening the status of silicon solar cells. However, critical issues of long‐term stability have to be solved for commercialization. The severe weakness of the state‐of‐the‐art PSCs against moisture originates mainly from the hygroscopic organic cations. Here, rubidium (Rb) is suggested as a promising candidate for an inorganic–organic mixed cation system to enhance moisture‐tolerance and photovoltaic performances of formamidinium lead iodide (FAPbI₃). Partial incorporation of Rb in FAPbI₃ tunes the tolerance factor and stabilizes the photoactive perovskite structure. Phase conversion from hexagonal yellow FAPbI₃ to trigonal black FAPbI₃ becomes favored when Rb is introduced. The authors find that the absorbance and fluorescence lifetime of 5% Rb‐incorporated FAPbI₃ (Rb_0.05FA_0.95PbI₃) are enhanced than bare FAPbI₃. Rb_0.05FA_0.95PbI₃‐based PSCs exhibit a best power conversion efficiency of 17.16%, which is much higher than that of the FAPbI₃ device (13.56%). Moreover, it is demonstrated that the Rb_0.05FA_0.95PbI₃ film shows superior stability against high humidity (85%) and the full device made with the mixed perovskite exhibits remarkable long‐term stability under ambient condition without encapsulation, retaining the high performance for 1000 h.     

Multi-Site Intermolecular Interaction for In Situ Formation of Vertically Orientated 2D Passivation Layer in Highly Efficient Perovskite Solar Cells

Surface passivation via 2D perovskite is critical for perovskite solar cells (PSCs) to achieve remarkable performances, in which the applied spacer cations play an important role on structural templating. However, the random orientation of 2D perovskite always hinder the carrier transport. Herein, multiple nitrogen sites containing organic spacer molecule (1H-Pyrazole-1-carboxamidine hydrochloride, PAH) is introduced to form 2D passivation layer on the surface of formamidinium based (FAPbI₃) perovskite. Deriving from the interactions between PAH and PbI₂, the defects of FAPbI₃ perovskite are effectively passivated. Interestingly, due to the multiple-site interactions, the 2D nanosheets are found to grow perpendicularly to the substrate for promotion of charge transfer. Therefore, an impressive power conversion efficiency of 24.6% and outstanding long-term stability are achieved for the 2D/3D perovskite devices. The findings further provide a perspective in structure design of novel organic halide salts for the fabrication of efficient and stable PSCs.     

Spray‐Coated Colloidal Perovskite Quantum Dot Films for Highly Efficient Solar Cells

A fully automated spray‐coated technology with ultrathin‐film purification is exploited for the commercial large‐scale solution‐based processing of colloidal inorganic perovskite CsPbI₃ quantum dot (QD) films toward solar cells. This process is in the air outside the glove box. To further improve the performance of QD solar cells, the short‐chain ligand of phenyltrimethylammonium bromide (PTABr) with a benzene group is introduced to partially substitute for the original long‐chain ligands of the colloidal QD surface (namely PTABr‐CsPbI₃). This process not only enhances the carrier charge mobility within the QD film due to shortening length between adjacent QDs, but also passivates the halide vacancy defects of QD by Br^? from PTABr. The colloidal QD solar cells show a power conversion efficiency (PCE) of 11.2% with an open voltage of 1.11 V, a short current density of 14.4 mA cm^?2, and a fill factor of 0.70. Due to the hydrophobic surface chemistry of the PTABr–CsPbI₃ film, the solar cell can maintain 80% of the initial PCE in ambient conditions for one month without any encapsulation. Such a low‐cost and efficient spray‐coating technology also offers an avenue to the film fabrication of colloidal nanocrystals for electronic devices.     

Energy Transfer Induced by TADF Polymer Enables the Recycling of Excitons in Perovskite Solar Cells

Formamidinium lead triiodide (FAPbI₃) has been demonstrated as the most efficient perovskite system to date, due to its excellent thermal stability and an ideal bandgap approaching the Shockley-Queisser limit. Whereas, there are intrinsic quantum confinement effects in FAPbI₃, which lead to unwanted non-radiative recombination. Additionally, the black α-phase of FAPbI₃ is unstable under room temperature due to the significant residual tensile stress in the film. To simultaneously address the above issues, a thermally-activated delayed fluorescence polymer P1 is designed in the study to modify the FAPbI₃ film. Owing to the spectral overlap between the photoluminescence of P1 and absorption of the above-bandgap quantum wells of FAPbI₃, the Förster energy transfer occurs at the P1/FAPbI₃ interface, which further triggers the Dexter energy transfer within FAPbI₃. The exciton “recycling” can thus be realized, which reduces the non-radiative recombination losses in perovskite solar cells (PSCs). Moreover, P1 is found to introduce compressive stress into FAPbI₃, which relieves the tensile stress in perovskite. Consequently, the PSCs with P1 treatment achieve an outstanding power conversion efficiency (PCE) of 23.51%. Moreover, with the alleviation of stress in the perovskite film, flexible PSCs (f-PSCs) also deliver a high PCE of 21.40%.     

Benzylammonium-Mediated Formamidinium Lead Iodide Perovskite Phase Stabilization for Photovoltaics

There is an ongoing surge of interest in the use of formamidinium (FA) lead iodide perovskites in photovoltaics due to their exceptional optoelectronic properties. However, thermodynamic instability of the desired cubic perovskite (α-FAPbI₃) phase at ambient conditions leads to the formation of a yellow non-perovskite (δ-FAPbI₃) phase that compromises its utility. A stable α-FAPbI₃ perovskite phase is achieved by employing benzylammonium iodide (BzI) and the microscopic structure is elucidated by using solid-state NMR spectroscopy and X-ray scattering measurements. Perovskite solar cells based on the FAPbI₃(BzI)_0.25 composition achieve power conversion efficiencies exceeding 20%, which is accompanied by enhanced shelf-life and operational stability, maintaining 80% of the performance after one year at ambient conditions.     

HPbI3: A New Precursor Compound for Highly Efficient Solution‐Processed Perovskite Solar Cells

Recently, there have been extensive research efforts on developing high performance organolead halide based perovskite solar cells. While most studies focused on optimizing the deposition processes of the perovskite films, the selection of the precursors has been rather limited to the lead halide/methylammonium (or formamidium) halide combination. In this work, we developed a new precursor, HPbI₃, to replace lead halide. The new precursor enables formation of highly uniform formamidium lead iodide (FAPbI₃) films through a one‐step spin‐coating process. Furthermore, the FAPbI₃ perovskite films exhibit a highly crystalline phase with strong (110) preferred orientation and excellent thermal stability. The planar heterojunction solar cells based on these perovskite films exhibit an average efficiency of 15.4% and champion efficiency of 17.5% under AM 1.5 G illumination. By comparing the morphology and formation process of the perovskite films fabricated from the formamidium iodide (FAI)/HPbI₃, FAI/PbI₂, and FAI/PbI₂ with HI additive precursor combinations, it is shown that the superior property of the HPbI₃ based perovskite films may originate from 1) a slow crystallization process involving exchange of H⁺ and FA⁺ ions in the PbI₆ octahedral framework and 2) elimination of water in the precursor solution state.     

Stabilization of α-phase FAPbI3 via Buffering Interfacial Region for Efficient p–i–n Perovskite Solar Cells

Formamidinium lead triiodide (FAPbI₃) with an ideal bandgap and good thermal stability has received wide attention and achieved a record efficiency of 26% in n–i–p (regular) perovskite solar cells (PSCs). However, imperfect FAPbI₃ formation on the typical hole transport layer (HTL), high interfacial trap-state density, and unfavorable energy alignment between the HTL and FAPbI₃ result in the inferior photovoltaic performance of p–i–n (inverted) PSCs with FAPbI₃ absorber. Herein, the α-phase FAPbI₃ is stabilized by constructing a buffer interface region between the NiO_x HTL and FAPbI₃, which not only diminishes NiO_x/FAPbI₃ interfacial reactions and defects but also facilitates carrier transport. Upon the construction of a buffer interface region, FAPbI₃ inverted PSC exhibits a high-power conversion efficiency of 23.56% (certified 22.58%) and excellent stability, retaining 90.7% of its initial efficiency after heating at 80 °C for 1000 h and 84.6% of the initial efficiency after operating at the maximum power point under continuous illumination for 1100 h. Besides, as a light-emitting diode device, the FAPbI₃ inverted PSC can be directly lit with an external quantum efficiency of 1.36%. This study provides a unique and efficient strategy to advance the application of α-phase FAPbI₃ in inverted PSCs.     

Stability of Perovskite Thin Films under Working Condition: Bias-Dependent Degradation and Grain Boundary Effects

Witnessed by the rapid increase of power conversion efficiency to 25.5%, organic–inorganic hybrid perovskite solar cells (PSCs) are becoming promising candidates of next-generation photovoltaics. However, PSCs can be unstable under the influence of light and bias. Especially, grain boundaries (GBs) are vulnerable to attack by light and bias in perovskite films, leading to degradation of photovoltaic properties of PSCs. Herein, photocurrent atomic force microscopy and Kelvin probe force microscopy are employed to systematically investigate the bias-dependent charge transport behaviors and stability of (FAPbI₃)_0.85(MAPbBr₃)_0.15 perovskite under working condition. Bias-dependent morphology and photocurrent images show irreversible decomposition of the perovskite at a bias of 0.1 V or below, which is accelerated by light illumination, leading to formation of an interfacial layer that restricts carrier transport. Meanwhile, GBs appear to enhance carrier transport at larger bias, but serve as breakthrough sites for perovskite decomposition at smaller bias. Introducing excess methylammonium iodide promotes decomposition, while potassium iodide passivation greatly relieves the decomposition. These results support the ion migration mechanism of decomposition through interfaces and GBs. This work provides a deeper understanding of bias-induced degradation of PSCs as well as bias-dependent double-edged roles of GBs, and forms valuable guidance for appropriate operation of PSCs.     

Air‐Stable Highly Crystalline Formamidinium Perovskite 1D Structures for Ultrasensitive Photodetectors

State‐of‐the‐art optoelectronic devices based on metal‐halide perovskites demand solution‐processed structures with high crystallinity, controlled crystallographic orientation, and enhanced environmental stability. Formamidinium lead iodide (α‐FAPbI₃) possesses a suitable bandgap of 1.48 eV and enhanced thermal stability, whereas perovskite‐type polymorph (α‐phase) is thermodynamically instable at ambient temperatures. Stable α‐FAPbI₃ perovskite 1D structure arrays with high crystallinity and ordered crystallographic orientation are developed by controlled nucleation and growth in capillary bridges. By surface functionalization with phenylethylammonium ions (PEA⁺), FAPbI₃ wires sustain a stable α‐phase after 28 day storage in the ambient environment with a relative humidity of 50%. Enhanced photoluminescence (PL) intensity and elongated PL lifetime demonstrate suppressed trap density and high crystallinity in these 1D structures, which is also reflected by the enhanced diffraction density and pure (001) crystallographic orientation in the grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) pattern. Based on these high‐quality 1D structures, sensitive photodetectors are achieved with average responsivities of 5282 A W^?1, average specific detectivities of more than 1.45 × 10¹⁴ Jones, and a fast response speed with a 3 dB bandwidth of 15 kHz.     

δ‐CsPbI3 Intermediate Phase Growth Assisted Sequential Deposition Boosts Stable and High‐Efficiency Triple Cation Perovskite Solar Cells

Cs/FA/MA triple cation perovskite films have been well developed in the antisolvent dripping method, attributable to its outstanding photovoltaic and stability performances. However, a facile and effective strategy is still lacking for fabricating high‐quality large‐grain triple cation perovskite films via sequential deposition method a, which is one of the key technologies for high efficiency perovskite solar cells. To address this issue, a δ‐CsPbI₃ intermediate phase growth (CsPbI₃‐IPG) assisted sequential deposition method is demonstrated for the first time. The approach not only achieves incorporation of controllable cesium into (FAPbI₃)_1–x(MAPbBr₃)_x perovskite, but also enlarges the perovskite grains, manipulates the crystallization, modulates the bandgap, and improves the stability of final perovskite films. The photovoltaic performances of the devices based on these Cs/FA/MA perovskite films with various amounts of the δ‐CsPbI₃ intermediate phase are investigated systematically. Benefiting from moderate cesium incorporation and intermediate phase‐assisted grain growth, the optimized Cs/FA/MA perovskite solar cells exhibit a significantly improved power conversion efficiency and operational stability of unencapsulated devices. This facile strategy provides new insights into the compositional engineering of triple or quadruple cation perovskite materials with enlarged grains and superior stability via a sequential deposition method.     

High-Efficiency Perovskite Quantum Dot Photovoltaic with Homogeneous Structure and Energy Landscape

The energy disorder originating from quantum dot (QD) size and relevant solid film inhomogeneity is detrimental to the charge transport and efficiency of QD based solar cells. The emergence of halide perovskite QDs (PQDs) have attracted great attention as promising absorbers in QD photovoltaics. However, it is currently difficult in preparing structural uniform PQD film with homogenous energetic landscape, which is essential for highly reproducible and efficient solar cells. Herein, assisted by a bidentate ligand 2,5-thiophenedicarboxylic acid, a facile solution phase anchoring (SPA) strategy is first reported for design and preparation of all-inorganic CsPbI₃ PQD film with reduced structure and energy disorder. The SPA can enhance PQD dispersion as well as dot-to-dot interaction, which is beneficial for fabricating high-quality PQD arrays and photovoltaic devices. The engineered CsPbI₃ PQD solar cell exhibits enhanced reproducibility, and higher open–circuit voltage together with a champion efficiency of 16.14%, which is among the highest report to date. These results are believed to provide design principle of uniform PQDs for high-performance optoelectronic application.     

In Situ Observation of Crystallization Dynamics and Grain Orientation in Sequential Deposition of Metal Halide Perovskites

Metal halide perovskites have revolutionized the development of highly efficient, solution‐processable solar cells. Further advancements rely on improving perovskite film qualities through a better understanding of the underlying growth mechanism. Here, a systematic in situ grazing‐incidence X‐ray diffraction investigation is performed, facilitated by other techniques, on the sequential deposition of formamidinium lead iodide (FAPbI₃)‐based perovskite films. The active chemical reaction, composition distribution, phase transition, and crystal grain orientation are all visualized following the entire perovskite formation process. Furthermore, the influences of additive ions on the crystallization speed, grain orientation, and morphology of FAPbI₃‐based films, along with their photovoltaic performances, are fully evaluated and optimized, which leads to highly reproducible and efficient perovskite solar cells. The findings provide key insights into the perovskite growth mechanism and suggest the fabrication of high‐quality perovskite films for widespread optoelectronic applications.     

Hybrid Perovskite Quantum Dot/Non-Fullerene Molecule Solar Cells with Efficiency Over 15%

Organic-inorganic hybrid film using conjugated materials and quantum dots (QDs) are of great interest for solution-processed optoelectronic devices, including photovoltaics (PVs). However, it is still challenging to fabricate conductive hybrid films to maximize their PV performance. Herein, for the first time, superior PV performance of hybrid solar cells consisting of CsPbI₃ perovskite QDs and Y6 series non-fullerene molecules is demonstrated and further highlights their importance on hybrid device design. In specific, a hybrid active layer is developed using CsPbI₃ QDs and non-fullerene molecules, enabling a type-II energy alignment for efficient charge transfer and extraction. Additionally, the non-fullerene molecules can well passivate the QDs, reducing surface defects and energetic disorder. The champion CsPbI₃ QD/Y6-F hybrid device has a record-high efficiency of 15.05% for QD/organic hybrid PV devices, paving a new way to construct solution-processable hybrid film for efficient optoelectronic devices.     

MXene-Interconnected Two-Terminal,Mechanically-Stacked Perovskite/Silicon Tandem Solar Cell with High Efficiency

Two-terminal, mechanically-stacked perovskite/silicon tandem solar cells offer a feasible way to achieve power conversion efficiencies (PCEs) of over 35%, provided that the state-of-the-art industrial silicon solar cells and perovskite solar cells (PSCs) are fully compatible with one another. Herein, two-terminal, mechanically-stacked perovskite/silicon tandem solar cells are developed by mechanically interconnecting semitransparent PSCs and TOPCon solar cells with a MXene interlayer. The semitransparent PSCs are made from wide-bandgap perovskite Cs_0.15FA_0.65MA_0.20Pb(I_0.80Br_0.20)₃ films. Furthermore, the co-additives KPF₆ and CH₃NH₃Cl(MACl) are employed to reduce grain boundaries and intragranular defects in the perovskite, boosting the PCE of the semitransparent PSCs to a record-high value of 20.96% under reverse scan (RS) through a reduction in non-radiative recombination probability. These optimized semitransparent PSCs are then employed in MXene-interconnected two-terminal, mechanically-stacked tandem solar cells. The enhanced interfacial carrier transportation, with minimal influence on light transmission, imparted by the MXene flakes allows the tandem solar cells to achieve a stabilized PCE of 29.65%. The tandem cells also exhibit acceptable operational stability and are able to retain ≈93% and 92% of their initial PCEs after 120 min of continuous illumination or storage in ambient air for 1000 h, respectively.     

Pushing the Envelope: Achieving an Open‐Circuit Voltage of 1.18 V for Unalloyed MAPbI3 Perovskite Solar Cells of a Planar Architecture

After an overwhelmingly fast increase during the period from 2009 to 2016, the power conversion efficiency of hybrid perovskite solar cells levels at ≈22% during the past two years. Every small advance to theoretical limits of the photovoltaic metrics will significantly deepen the understanding of internal processes inside the perovskite solar cells. Here, by introducing chloroform as the antisolvent, the one‐step deposition method to fabricate methylammonium lead tri‐iodide (MAPbI₃) perovskite films under ambient air condition is optimized. With MAPbI₃ solar cells of a planar architecture, a record high V_oc of 1.18 V is obtained under simulated AM1.5 sunlight. The achievement helps pure MAPbI₃ to reestablish its potential as a model compound for research in hybrid perovskite solar cells. After systematic comparison on different electron transport layers (SnO₂ and TiO₂) and fluorine doped tin oxide (FTO) substrates of different roughness for photon trapping inside MAPbI₃ solar cells, the remaining 0.14 V V_oc loss is elucidated to be due to the poor luminescent property of the MAPbI₃ films.     

A Thienothiophene-Based Cation Treatment Allows Semitransparent Perovskite Solar Cells with Improved Efficiency and Stability

Perovskite surface treatment with additives has been reported to improve charge extraction, stability, and/or surface passivation. In this study, treatment of a 3D perovskite ((FAPbI₃)_1−x(MAPbBr₃)_x) layer with a thienothiophene-based organic cation (TTMAI), synthesized in this work, is investigated. Detailed analyses reveal that a 2D (n = 1) or quasi-2D layer does not form on the PbI₂-rich surface 3D perovskite. TTMAI-treated 3D perovskite solar cells (PSCs) fabricated in this study show improved fill factors, providing an increase in their power conversion efficiencies (PCEs) from 17% to over 20%. It is demonstrated that the enhancement is due to better hole extraction by drift-diffusion simulations. Furthermore, thanks to the hydrophobic nature of the TTMAI, PSC maintains 82% of its initial PCE under 15% humidity for over 380 h (the reference retains 38%). Additionally, semitransparent cells are demonstrated reaching 17.9% PCE with treated 3D perovskite, which is one of the highest reported efficiencies for double cationic 3D perovskites. Moreover, the semitransparent 3D PSC (TTMAI-treated) maintains 87% of its initial efficiency for six weeks (>1000 h) when kept in the dark at room temperature. These results clearly show that this study fills a critical void in perovskite research where highly efficient and stable semitransparent perovskite solar cells are scarce.