Modulating silica‐rubber interface by a biorenewable urushiol derivative. Synthesis,surface modification,and mechanical and dynamic mechanical properties of vulcanizates therefrom

Hydrogenated urushiol (i.e., 3‐pentadecylcatechol) can be used to directly modify silica particles via surface complexation with silicon. The degree of surface coverage can be varied by experimental conditions. Mooney viscosity and Payne effect studies of uncured rubber compounds show that dispersion of silica filler completely covered by hydrogenated urushiol in the absence of coupling agent bis[3‐(triethoxysilyl)propyl] tetrasulfide (TESPT) is as effective as dispersion of standard unmodified silica in the presence of TESPT under otherwise identical mixing conditions. Low bound rubber content and observation of filler flocculation at the early stage of vulcanization demonstrate that the filler‐rubber interaction is physical in nature as the result of surface modification by hydrogenated urushiol. When silica is partially covered by hydrogenated urushiol, it can be used in conjunction with TESPT. Judicial combination of partially covered silica and TESPT can give optimal properties to the resultant vulcanizate, including reduced Payne effect and improved cut resistance while maintaining other key parameters the same in comparison with a standard silica‐TESPT reinforced rubber. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45937.     

Mechanistic aspects of silane coupling agents with different functionalities on reinforcement of silica‐filled natural rubber compounds

Silane coupling agents containing different specific functionalities are studied to gain understanding of their roles in silica‐filled natural rubber (NR) compounds. Five different silane coupling agents, that is bis‐(triethoxysilylpropyl) tetrasulfide (TESPT), bis‐(triethoxysilylpropyl) disulfide (TESPD), octyltriethoxysilane, vinyltrimethoxysilane, and bis‐(trimethyl‐silylmethyl) tetrasulfide (TMSMT), are comparatively investigated, by taking the most commonly used TESPT as a reference. The results reveal that alkoxy‐based silanes can effectively reduce the filler–filler interaction and lower compound viscosity owing to the effect of silane‐to‐silica hydrophobation which contributes to better compatibility between silica and NR. The alkoxy‐silanes with a sulfur moiety, that is TESPT and TESPD, show more pronounced improvement in overall properties as a result of filler–rubber interactions. The use of TMSMT which has no alkoxy groups but contains only a sulfur moiety elucidates that there are three reaction mechanisms involved in systems with sulfur‐alkoxy‐based silane. These are as follows: (1) the silane‐to‐silica or silanization/hydrophobation reaction; (2) the silane‐to‐rubber or coupling reaction; and (3) rubber–rubber crosslinking originating from active sulfur released by the polysulfide‐based silane TESPT. These simultaneous reactions are temperature dependent, and show an optimum level at a dump temperature of approximately 140–150°C, as depicted by filler–filler and filler–rubber interactions, as well as mechanical properties of such compounds. POLYM. ENG. SCI., 55:836–842, 2015. © 2014 Society of Plastics Engineers     

A comparison of the effects of traditional and wet mixing processes of rubber on metal friction and wear

Prolonged operations of mixers cause wear of mixer rotors and chamber walls and affect the clearances between the rotors and chamber walls, which reduce the mixing effect, weaken the dispersion of the packing, and affect the quality of rubber products. In this study, the effects of traditional mixing and wet mixing on the friction and wear of the chamber, and the properties of rubber were compared by using 60 phr of a silica natural rubber formulation system. The results show that a silanization reaction occurs between silica and the silane coupling agent during the mixing process and that the reaction rate is fastest when the temperature of the mixing chamber is maintained between 145 and 155°C for 1 min during the mixing process. The products of silanization reaction are ethanol and water; the water vapor that forms at high temperatures corrodes the mixing chamber of the internal mixer and aggravates wear and tear. Due to the high dispersion of silica during wet mixing, the silanization reaction is more complete and water vapor is produced at a high temperature. Hence, the rubber compound obtained by wet mixing has more significant wear on the mixing chamber.     

Improvement of properties of silica‐filled natural rubber compounds using polychloroprene

Because silica has strong filler–filler interactions, a silica‐filled rubber compound is characterized by a poor dispersion of the filler. Properties of silica‐filled natural rubber (NR) compounds were improved using polychloroprene (chloroprene rubber [CR]). The bound rubber content of the compound increases and the filler dispersion is also improved by adding CR to the compound. Physical properties such as modulus, tensile strength, abrasion, and crack resistance are improved by adding CR. Elongation at break of the vulcanizates containing CR is longer than that of the vulcanizate without CR, although crosslink density of the former is higher than that of the latter. The improved physical properties are attributed to the good dispersion of silica by adding CR. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2609–2616, 2002     

Cardanol grafted natural rubber: A green substitute to natural rubber for enhancing silica filler dispersion

Natural rubber (NR) usage is wide‐spread from pencil erasers to aero tyres. Carbon black and silica are the most common reinforcing fillers in the rubber industries. Carbon black enhances the mechanical properties, while silica reduces the rolling resistance and enhances the wet grip characteristics. However, the dispersion of polar silica fillers in the nonpolar hydrocarbon rubbers like natural rubber is a serious issue to be resolved. In recent years, cardanol, an agricultural by‐product of the cashew industry is already established as a multifunctional additive in the rubber. The present study focuses on dispersion of silica filler in natural rubber grafted with cardanol (CGNR) and determination of its technical properties. The optimum cure time reduces and the cure rate increases for the CGNR vulcanizates as compared to that of the NR vulcanizates at all loadings of silica varying from 30 to 60 phr. The interaction between the phenolic moiety of cardanol and the siloxane as well as silanol functional groups present on the silica surface enhances the rubber–filler interaction which leads to better reinforcement. The crosslink density and bound rubber content are found to be higher for the silica reinforced CGNR vulcanizates. The physico‐mechanical properties of the silica reinforced CGNR vulcanizates are superior to those of the NR vulcanizates. The CGNR vulcanizates show lower compression set and lower abrasion loss. The dynamic‐mechanical properties exhibit less Payne effect for silica reinforced CGNR vulcanizates as compared to the NR vulcanizates. The transmission electron photomicrographs show uniform dispersion of silica filler in the CGNR matrix. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43057.     

The behavior of natural rubber–epoxidized natural rubber–silica composites based on wet masterbatch technique

Natural rubber–epoxidized natural rubber–silica composites were prepared by the wet masterbatch technique and the traditional dry mixing method. Performances of the composites based on different preparation methods were investigated with a moving die rheometer, an electronic universal testing machine, a dynamic mechanical analyzer, a nuclear magnetic resonance crosslink density analyzer, a rubber processing analyzer (RPA), a scanning electron microscope (SEM), and a transmission electron microscope (TEM). The RPA, SEM, and TEM analyses indicated that silica has better dispersion, lower filler–filler interaction, and better filler–rubber interaction in compounds based on the wet masterbatch technique, leading to improvements in mechanical strength and the dynamic mechanical and compression properties of the composites. It also indicates that composites prepared by the wet masterbatch technique have shorter scorch time, faster curing velocity, and higher crosslink density. The composites prepared by the wet materbatch technique also have lower rolling resistance, which is an important property for their use as a green material for the tire industry. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43571.     

Effect of adding different silane coupling agents on metal friction and wear in mixing process

The function of silane coupling agent in rubber mixing field is to combine inorganic matrix with rubber organic matrix. Silica is commonly used in the rubber mixing field to strengthen rubber. The size and amount of silica aggregates in the mixing process are important factors affecting the wear of the mixing chamber. The wear of the mixing chamber would lead to a increasing gap between the mixer chamber and the rotor, which caused the mixing efficiency reducing. It also affected the dispersion effect, then affected the mechanical and physical properties of the vulcanized rubber. In this paper, the effects of rubber compound on metal friction and wear were studied by using four silane coupling agents commonly used in rubber mixing field. The experiment was carried out at 15°C, and the attention should be paid to drying during sample preparation to avoid the deviation of the experiment caused by hydrolysis of silane coupling agent. The results showed that silanization reaction occured between silica and silane coupling agent in the mixing process. The mixing temperature was usually maintained at 145 to 155°C for 1 min in the mixer, and the silanization reaction rate was the fastest during this time. We took this rubber compound as the research object and studied the friction and wear of the rubber compound on the mixing chamber in the mixing process. The products of the silylation reaction are alcohol and water. This paper studies the corrosion and abrasion of the mixing chamber by water at high temperatures. In the mixing process, abrasive wear was the main wear form, but the corrosion wear caused by high temperature steam still occupied a large proportion.     

Crack growth of natural rubber filled with functionalized silica particles

In the present work, functionalized liquid isoprene rubber (FLIR) was used to improve the filler dispersion and filler–rubber interaction in the silica filled natural rubber system. By the infrared spectra and scanning electron microscopy, it was proved that the FLIR was successfully grafted on the silica and the functionalized silica was dispersed in the NR matrix homogeneously. Based on the real‐time crack tip morphology monitoring method, the influence of FLIR on the crack growth behavior of NR filled with silica was analyzed. By the adding of FLIR, the crack resistance of the natural rubber embedded with functionalized silica is remarkably increased. When the weight ratio of FLIR to silica is 3:10, the NR composite has the best crack resistance. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42972.     

Synergistic effects of hybrid carbon nanomaterials in room‐temperature‐vulcanized silicone rubber

This work examines nanocomposites based on nanofillers and room‐temperature‐vulcanized silicone rubber. The carbon nanofillers used were conductive carbon black (CB), carbon nanotubes (CNTs) and graphene (GE). Vulcanizates for CB, GE, CNTs as the only filler and hybrid fillers using CNTs, CB and GE were prepared by solution mixing. The elastic modulus for CNT hybrid with CB at 15 phr (4.65 MPa) was higher than for CB hybrid with GE (3.13 MPa) and CNTs/CB/GE as the only filler. Similarly, the resistance for CNT hybrid with CB at 10 phr (0.41 kΩ) was lower than for CB (0.84 kΩ) at 20 phr and CNTs as the only filler. These improvements result from efficient filler networking, a synergistic effect among the carbon nanomaterials, the high aspect ratio of CNTs and the improved filler dispersion in the rubber matrix. © 2016 Society of Chemical Industry     

Interfacial Interactions of Silica and Natural Rubber Enhanced by Hydroxyl Telechelic Natural Rubber as Interfacial Modifier

The incompatibility between hydrophilic silica and hydrophobic rubber is an important problem on using silica in nonpolar rubber. In this study, hydroxyl telechelic natural rubber (HTNR) that contains hydroxyl‐terminated groups was introduced into silica‐reinforced natural rubber (NR) in order to improve the bonding strength between rubber and silica. The properties of silica‐reinforced NR compounds and vulcanizates as a function of varying silica contents were evaluated at a fixed HTNR concentration at 8% wt/wt of silica content. The results show that the improvement of silica dispersion and decreasing of filler–filler interactions (Payne effect) were obtained in the NR compounds and vulcanizates with HTNR addition. The enhancements in tensile properties, crosslink density, abrasion resistance, heat build‐up, and thermal properties of the silica‐reinforced NR vulcanizates with added HTNR confirmed that HTNR performed good as interfacial modifier of silica. In the study, the optimum properties of silica‐reinforced NR vulcanizate were achieved at 30 phr silica with 2.4 phr HTNR. However, HTNR still showed poorer efficiency than the synergy between commercial silane coupling agent, bis [3‐(triethoxysilyl) propyl] tetrasulphide (TESPT) and diphenylguanidine (DPG) when used in silica‐reinforced NR vulcanizate. J. VINYL ADDIT. TECHNOL., 26:291–303, 2020. © 2019 Society of Plastics Engineers     

Promoted dispersion of silica and interfacial strength in rubber/silica composites by grafting with oniums

The dispersion of filler and interfacial interaction are crucial in determining the properties of rubber composites. Aiming to improve the dispersion and filler–rubber interaction, we introduce rubber graft bearing oniums in a rubber/silica composite. To fulfill this goal, the graft, which is prepared via thio-ene click reaction between 1-methylimidazolium mercaptopropionate (MMP) and the pendent vinyl groups of a solution-polymerized styrene-butadiene rubber (SSBR), is introduced into the silica-filled styrene-butadiene rubber (SBR) composite. The dispersion of silica and interfacial interaction are improved via hydrogen bonding interaction. Moreover, the graft exhibits catalytic effect toward the silanization, which can improve interfacial interaction in the composites with bis [3-(triethoxysilyl) propyl] tetrasulfide. With 2 phr of the graft, the tensile modulus (stress at 300% strain) is increased by 18% and the abrasion loss is decreased by 31%. This study opens a new attempt to improve the filler dispersion and filler–rubber interaction in the composites with onium-bearing polymers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 48243.     

The mechanism of carbon–silica dual phase filler modified by ionic liquid and its reinforcing on natural rubber

The carbon–silica dual phase filler (CSDPF) was modified by ionic liquids (ILs): 1‐allyl‐3‐methyl‐imidazolium chloride (AMI) and 1‐butlyl‐3‐methyl‐imidazolium hexafluorophosphate (BMI). The modified CSDPF was then incorporated into natural rubber (NR) through mechanical mixing. The interactions between CSDPF and ILs were investigated using differential scanning calorimetry (DSC), Fourier‐transform infrared spectroscopy (FTIR), and Raman spectroscopy. The bound rubber of NR compounds, the mechanical properties, and dynamic properties of NR vulcanizates filled with ILs modified CSDPF (ILs‐CSDPF/NR) were measured. The results showed that the AMI interacted with CSDPF through both hydrogen bonds and van der Waals forces, while the interaction between BMI and CSDPF was merely weak van der Waals force. The modification of CSDPF by ILs could improve the tensile strength, tear resistance, and fatigue life of NR vulcanizates. The AMI‐CSDPF/NR gave the superior mechanical and dynamic properties among the NR vulcanizates with the highest bound rubber content and the most homogeneous filler dispersion, which was displayed in scanning electron microscope (SEM) images. POLYM. COMPOS., 36:1721–1730, 2015. © 2014 Society of Plastics Engineers     

Determination of silica content and its dispersion in NR‐PBR‐RR ternary blends/ nanocomposites by digital image analysis of SEM images

To study the silica content and its dispersion behavior in natural rubber (NR)‐polybutadiene rubber (PBR)‐reclaim rubber (RR)/ nanocomposites, scanning electron microscopy (SEM) images was used by image processing technique. A suitable algorithm was proposed to determine the silica percentage of the nanocomposites. Based on proposed algorithm, image analysis was carried out to present quantitative and qualitative measure of size distribution of silica (filler) agglomerates in the polymer nanocomposites. On the basis of stack based region detection algorithm, various sizes of silica particles was detected and 2D image was reconstructed through 10 different colors for 10 types of regions. This article also dealt with various aspects of the polymers such as filler‐filler interaction, agglomerate detection, and dispersion of filler agglomerates through image analysis of their SEM micrographs. POLYM. COMPOS., 38:2080–2089, 2017. © 2015 Society of Plastics Engineers     

Properties of natural rubber composites reinforced with silica or carbon black: influence of cure accelerator content and filler dispersion

Filler dispersion is a critical factor in determining the properties of filled rubber composites. Silica has a high density of silanol groups on the surface, which lead to strong filler–filler interactions and a poor filler dispersions. A cure accelerator, N‐tert‐butyl‐2‐benzothiazole sulfenamide (TBBS), was found to improve filler dispersion in silica‐filled natural rubber (NR) compounds. For the silica‐filled NR compounds without the silane coupling agent, the reversion ratio generally increased with increase in TBBS content, whereas those of the silica‐filled NR compounds containing the silane coupling agent and carbon black‐filled NR compounds decreased linearly. The tensile strength of the silica‐filled NR vulcanizate without the silane coupling agent increased as the TBBS content increased, whereas carbon black‐filled samples did not show a specific trend. The experimental results were explained by TBBS adsorption on the silica surface and the improvement of silica dispersion with the aid of TBBS. Copyright © 2003 Society of Chemical Industry     

Effects of different interphases on the mechanical properties of cured silanized silica‐filled styrene–butadiene/polybutadiene rubber blends for use in passenger car tire treads

Polybutadiene (BR) and styrene–butadiene (SBR) rubbers containing the same loading of precipitated silica nanofiller were prepared. The silica surfaces were pretreated with bis(3‐triethoxysilylpropyl) tetrasulfide to chemically bond the silica to the rubber. The rubber compounds were mixed together for different times and at different temperatures to produce SBR/BR blends. The mass fraction and composition values of the interphases in the blends were subsequently determined with modulated‐temperature differential scanning calorimetry. These properties changed substantially as a function of mixing temperature and mixing time. The hardness, tensile strength, elongation at break, stored energy density at break, tear strength, modulus, abrasion resistance, heat buildup, and loss tangent of the cured blends were measured over a wide range of test conditions. Elongation at break, stored energy density at break, tearing energy, and abrasion resistance benefited from increases in the mass fraction of the interphase. The remaining properties were influenced mainly by the filler loading and mixing time of the two rubber compounds. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of nanostructures of modified clay–carbon black on physico‐mechanical,electrical, and acoustic properties of elastomer‐based composites

Elastomeric composites based on nitrile rubber (NBR), carbon black (CB), and organically modified nanoclay (NC) were prepared using a laboratory two‐roll mixing mill. Influences of the hybrid filler system (CB+NC) on various properties of NBR compound were analyzed. It was found that the addition of hybrid filler (CB+NC) over only carbon black enhances various properties. It was also found that the addition of nanoclay to the rubber matrix effectively improved key properties. Acoustics and electrical properties were modified with reduced water absorption because of layered clay platelets. The lower volume resistivity of NBR composites reflected better electrical conductivity attributed to the presence of nanoclay leading to effective filler connectivity. X‐ray diffraction and transmission electron microscopy measurements revealed that nanoclays were mostly intercalated and were uniformly dispersed. Use of calcium stearate facilitated dispersion of nanoclay in the rubber matrix which was observed through the formation of nanostructures including “nano” and “halo” units. Time temperature superposition in dynamic mechanical analysis test of the composites indicated lower mechanical loss in the frequency range of interest. The advantages accruing due to overall property enhancement, including lower water absorption, and better electrical and excellent acoustic properties of NBR composites make it suitable as underwater acoustic transparent materials for transducer encapsulation application. POLYM. COMPOS., 37:1786–1796, 2016. © 2014 Society of Plastics Engineers     

Exploring a highly dispersible silica–elastomer composite for tire applications

In this article, we provide an extensive analyses of various properties that are required for tire tread based on developed highly dispersible (HD) silica‐filled epoxidized natural rubber composites. Silica in an HD form has become a staple filler in tire tread applications because of its inherent advantages. In this study, epoxidized natural rubber with 25 mol % epoxide (ENR 25) and natural rubber were mixed with two different types of HD silica for superior reinforcement. A standard tire tread formulation was used as the base compound. The magic triangle properties were conspicuously influenced by the viscoelastic characteristics of the vulcanizates. The introduction of polar rubber (ENR 25) into the HD silica greatly improved rheological, physicomechanical, bound rubber content, and dynamic mechanical properties, and this led to a better, fuel‐efficient tire. We successfully achieved this, even in the absence of a silane coupling agent. ENR 25 played an imperative role in showing an extraordinary rubber–filler interactions and was primarily responsible for these observations. In this study, we explored the HD silica dispersion with transmission electron microscopy observations. Morphological studies revealed well‐dispersed HD silica with the formation of a rubber–filler network. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43531.     

Improvement of properties of silica‐filled styrene–butadiene rubber compounds using acrylonitrile–butadiene rubber

Since silica has strong filler–filler interactions and adsorbs polar materials, a silica‐filled rubber compound has a poor dispersion of the filler and poor cure characteristics. Improvement of the properties of silica‐filled styrene–butadiene rubber (SBR) compounds was studied using acrylonitrile–butadiene rubber (NBR). Viscosities and bound rubber contents of the compounds became lower by adding NBR to the compound. Cure characteristics of the compounds were improved by adding NBR. Physical properties such as modulus, tensile strength, heat buildup, abrasion, and crack resistance were also improved by adding NBR. Both wet traction and rolling resistance of the vulcanizates containing NBR were better than were those of the vulcanizate without NBR. The NBR effects in the silica‐filled SBR compounds were compared with the carbon black‐filled compounds. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1127–1133, 2001     

Self‐crosslinkable epoxidized natural rubber–silica hybrids

Epoxidized natural rubber (ENR)–silica hybrids without any other additives were prepared by an open‐mill mixing method at room temperature. The curing characteristics, crosslinking density, mechanical properties, and dynamical mechanical properties were investigated. The results indicate that the ENR–silica hybrid materials could be cured with silica as a crosslinking and reinforcing agent. Attenuated total reflection–Fourier transform infrared spectroscopy and solid‐state ¹³C‐NMR spectroscopy exposed the characteristics of the interfacial interaction in the hybrids and confirmed the existence of chemical bonds and hydrogen bonds between the epoxy group and Si? OH. Scanning electron microscopy illustrated a good dispersion of silica in the ENR matrix. Meanwhile, the modulus at 100% elongation of the hybrid reached 9.64 MPa when 100‐phr silica was loaded; a similar trend was observed for the hardness. Finally, our findings might extend the concept of rubber curing and open a new space for making an environmentally friendly rubber composite. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44605.     

Vulcanization accelerator functionalized nanosilica: Effect on the reinforcement behavior of SSBR/BR

The application of nanosilica in high performance tire highly depends on its uniform dispersion in rubber matrix. A series of dispersible nanosilica (denoted as DNS) modified by diphenyl guanidine (denoted as DPG, a vulcanization accelerator) were synthesized by liquid phase in situ surface chemical modification. The structure of the as‐obtained DNS‐DPG fillers was investigated in relation to Fourier transform infrared spectrometric analysis, thermogravimetric analysis, dynamic light scattering test, and transmission electron microscopic observation. It was found that the rubber vulcanization accelerator DPG was successfully grafted onto the surface of nanosilica, thereby effectively preventing the silica nanoparticles from agglomeration and significantly reducing the average particle size. The reinforcing effect of the DPG‐modified DNS nano‐fillers for the solution polymerized styrene butadiene rubber/butadiene rubber (denoted as SSBR/BR) was dependent on the fraction of the modifier DPG; in particular, when the amount of modifier DPG is 135.25 mmol/kg (denoted as DNS‐DPG‐3), silica exhibited very homogeneous dispersion in the SSBR/BR matrix, which contributed to significantly enhancing the filler‐rubber compatibility. As a result, SSBR/BR/DNS‐DPG‐3 nanocomposite exhibited the best mechanical properties, integrated high abrasion resistance and low rolling resistance. The modified silica not only possessed the effect of accelerating the crosslinking reaction, but also showed the reinforcing effect. This could make it feasible for SSBR/BR/DNS‐DPG nanocomposite to find promising application in green tire tread. POLYM. ENG. SCI., 59:1270–1278 2019. © 2019 Society of Plastics Engineers