A glucose oxidase immobilization platform for glucose biosensor using ZnO hollow nanospheres

A good route (template-directed synthetic route) for the fabrication of ZnO hollow nanospheres (ZnO-HNSPs) was proposed. ZnO hollow nanosphere is a wonderful platform to immobilize glucose oxidase for glucose biosensor owing to the high specific surface area and high isoelectric point (IEP). Along with nafion and glucose oxidase (GOD), a glucose sensor was designed. Nafion/ZnO-HNSPs/GOD/GCE displays higher catalytic activity toward the glucose oxidation than Nafion/ZnO nano-Flowers/GOD/GCE. Linear response was obtained over a concentration range from 5.0 × 10⁻³ mM to 13.15 mM with a detection limit of 1.0 μM (S/N = 3), and the sensitivity was 65.82 μA/(mM cm²). Satisfyingly, the Nafion/ZnO-HNSPs/GOD/GCE could effectively avoid the interferences from the common interfering species such as uric acid (UA), ascorbic acid (AA), dopamine (DA) and fructose. The Nafion/ZnO-HNSPs/GOD modified electrode allows high sensitivity, excellently selective, stable, and fast amperometric sensing of glucose and thus is promising for the future development of glucose sensors.     

Noble metal dispersed multiwalled carbon nanotubes immobilized ss-DNA for selective detection of dopamine

A hybrid nanocomposite consisting of Pt nanoparticles decorated functionalized multiwalled carbon nanotubes (f-MWNT) immobilized with single strand-DNA (ss-DNA) has been devised for the selective detection of dopamine (DA). AFM and TEM analyses show that wrapping of ss-DNA over Pt/f-MWNT reduces the aggregation of the nanotubes arising from van der Waals interaction. In addition to serving as a noncovalent dispersion agent, ss-DNA facilitated electron transfer towards dopamine, as analyzed by cyclic voltammetric studies (CV) and amperometry. The sequence dependency of ss-DNA for DA detection has been analyzed using AC and GT ss-DNA. The hybrid nanocomposite biosensor consisting of AC/ss-DNA exhibits linearity of detection upto ∼315 μM, with a detection limit 0.8 μM towards dopamine. The best sensing performance with linearity of ∼800 μM and detection limit ∼0.45 μM has been obtained with GT/ss-DNA immobilized Pt/f-MWNT sensor. Further, the nafion coated ss-DNA wrapped Pt/f-MWNT immobilized biosensor exhibits good stability, fast response time (<3 s) and selective detection of DA in the presence of ascorbic acid and uric acid.     

Fabrication of novel chitosan nanofiber/gold nanoparticles composite towards improved performance for a cholesterol sensor

A novel amperometric cholesterol biosensor was fabricated by the immobilization of ChOx (cholesterol oxidase) onto the chitosan nanofibers/gold nanoparticles (designated as CSNFs/AuNPs) composite network (NW). The fabrication involves preparation of chitosan nanofibers (CSNFs) and subsequent electrochemical loading of gold nanoparticles (AuNPs). Field emission scanning electron microscopy (FE-SEM) was used to investigate the morphology of CSNFs (sizes in the range of ∼50-100 nm) and spherical AuNPs. Cyclic voltammetry, hydrodynamic voltammetry and amperometry were used to examine the performance of CSNF-AuNPs/ChOx biosensor. The CSNF-AuNPs/ChOx biosensor exhibited a wide linear response to cholesterol (concentration range of 1-45 μM), good sensitivity (1.02 μA/μM), low response time (∼5 s) and excellent long term stability. The combined existence of AuNPs within CSNFs NW provides the excellent performance of the biosensor towards the electrochemical detection of cholesterol.     

Potentiometric urea biosensor based on urease immobilized by an electrosynthesized poly(o-phenylenediamine) film with buffering capability

A simple and novel potentiometric biosensor for urea detection was prepared by employing an electrosynthesized polymer with buffering capability. It was obtained by deposition of a weighed amount of urease (Ur) at a glassy carbon (GC) electrode followed by immobilization by an electrosynthesized poly-o-phenylenediamine (PPD) film. An unconventional “upside-down” (UD) geometry was employed for the electrochemical cell. The response of GC/Ur/PPD sensor is linear with urea concentration in the range 10 μM to 1 mM (15 mV/mM, R² = 0.9999) due to buffering capability of PPD film, which represents a novel role of electrosynthesized polymers in their application to biosensors. At higher concentrations, the more common Nernstian response (28 mV/decade, R² = 0.9987) is observed. The sensor exhibits a sufficient sensitivity for practical determinations, rapid response and long term stability.     

Amperometric detection of phenolic compounds with enzyme immobilized in mesoporous silica prepared by electrophoretic deposition

Laccase was immobilized in mesoporous silica powder with a 7.0 nm pore diameter (FSM7.0) coated onto a glassy carbon electrode using an electrophoretic deposition technique, and the electrode was then applied to the amperometric detection of catechol, which is a typical phenolic compound. The behavior of a biosensor attached to the electrode was examined in terms of pH, applied potential, sensitivity and operational range, selectivity, and storage stability. The sensor showed an optimum response at a pH of 5.0 and at an applied potential of −50 mV. The determination range and the response time for catechol were 2.0-100 μM and approximately 2 min, respectively. In addition, the sensor was quite stable and retained its initial response without notable change after being stored for over 50 days. This result suggests that our method is quite useful for the fabrication of a high-performance biosensor for practical use.     

Fabrication of a novel electrochemiluminescence glucose biosensor using Au nanoparticles decorated multiwalled carbon nanotubes

Au nanoparticles (nanoAu) with an average diameter of 60 nm were decorated on the surface of multiwalled carbon nanotubes to prepare MWCNTs-nanoAu nano-hybrids. The MWCNTs-nanoAu nano-hybrids were cast on the surface of a glassy carbon electrode and were then further modified with a layer comprising glucose oxidase and chitosan to fabricate a novel electrochemiluminescence (ECL) glucose biosensor. The biosensor showed a remarkably improved electrocatalytic activity towards luminol oxidation and significant improvement in its ECL response. The proposed ECL biosensor exhibited excellent performance for glucose detection with a wide linear range (1-1000 μM), low detection limit (0.5 μM), excellent reproducibility (0.5%) and satisfactory selectivity.     

Analysis of volatile alcohols in apple juices by an electrochemical biosensor measuring in the headspace above the liquid

An electrochemical biosensor was optimised for the analysis of volatile alcohols directly from the gas phase without prior absorption or pre-concentration. The sensor is based on the alcohol oxidase (Pichia pastoris) catalyzed conversion of ethanol and the amperometric detection of the generated hydrogen peroxide. Key part of the three-electrode set-up was a gas-diffusion working electrode (potential: +600 mV vs. Ag/AgCl) that consisted of a porous Teflon membrane coated with a thin platinum layer. Headspace samples were analysed for alcohols and used to derive alcohol concentrations in the liquid phase. The biosensor had a sensitivity of 3.43 μA/mM for ethanol, a response time of 69 s, a linear dynamic range of 0.10-30 mM, a theoretical detection limit (3 < S/N) of 9.9 μM, and a stability of 86% during continuous operation (18 h @ 1 mM ethanol). Using one sensor on three consecutive days, the mean coefficient of variation was 1.3% (three measurements each day @ 10 mM ethanol). Alcohol contents of three apple juices determined with the biosensor were in the range 0.30 g/l-0.67 g/l (equivalent to 6.51 mM-14.5 mM). However, ethanol contents determined by high pressure liquid chromatography coupled to refractive index detection (HPLC-RI) and by a commercial enzyme test kit based on alcohol dehydrogenase ranged from 0.12 g/l to 0.38 g/l (equivalent to 2.60 mM-8.25 mM). Both indicate that the biosensor detected alcohols other than ethanol in the apple juices. HPLC-RI coupled to the biosensor in a flow-through configuration demonstrated that the biosensor detected methanol concomitant to ethanol. Thus, the biosensor could perform a qualitative analysis of the total content of volatile alcohols in apple juices by analysing the gas phase above the sample. This offers the additional advantage that possible, non-volatile interfering substances in the liquid sample cannot impair the measurement.     

Amperometric biosensor for catechol using electrochemical template process

A novel amperometric biosensor for the determination of catechol was developed accordingly to the electrochemical template procedure. The optimum fabricating conditions of the biosensor were studied. The resulting biosensor with the limit of less than 0.05 μM can be used for detection of catechol in the linear range of 2.5-140 μM. The maximum response current (I_max) and the Michaelis-Menten constant (k′_m) are 3.08 μA and 77.52 μM, respectively. The activation energy (E_a) of the polyphenol oxidase (PPO) catalytic reaction is 25.56 kJ mol⁻¹ in the B-R buffer. The stability of the PANI-CA biosensor fabricated with the electrochemical template process (retains 86% of the original activity after four months) is much higher than that fabricated with one-step and two-step processes (retains 75% of the original activity after four months). The effects of potential and pH on the response current of the biosensor are also described.     

A novel amperometric biosensor for oxalate determination using multi-walled carbon nanotube-gold nanoparticle composite

An amperometric oxalate biosensor using nanohybrid film of multi-walled carbon nanotubes (MWCNTs) and gold colloidal nanoparticles (GNPs) via carbodiimide chemistry by forming amide linkages between carboxylic acid groups on the CNTs and amine residues of cysteamine self-assembled monolayer (SAM) has been prepared. The c-MWCNTs were immobilized on the gold (Au) electrode and characterized by FTIR. The morphologies of the c-MWCNT/Au and GNPs/MWCNT/Au electrodes were investigated by scanning electron microscopy (SEM) and the electrochemical performance of the Au, c-MWCNT/Au and GNPs/c-MWCNT/Au electrodes were also studied amperometrically. The Cl⁻ and NO₃⁻ insensitive oxalate oxidase from grain sorghum was finally immobilized on this electrode. The influence of pH, temperature and oxalate concentration on electrode activity was studied. The electrode showed optimum response within 7 s. The electrocatalytic response showed a linear dependence on the oxalic acid concentration ranging from 1 to 800 μM with a detection limit of 1 μM. The K_m value for the oxalic acid sensor was 444.44 μM. The enzyme electrode retained 30% of its initial activity after 5 months, when stored at 4 °C. The electrode was employed for measurement of oxalic acid in serum, urine and foodstuffs.     

Design and performances of immunoassay based on SPR biosensor with Au/Ag alloy nanocomposites

A novel method for detecting human IgG is reported, which is based on Au/Ag alloy nanocomposites for amplifying surface plasmon resonance response. Au/Ag alloy nanocomposites were characterized in detail by transmission electron microscopy (TEM), UV-vis absorption spectroscopy and X-ray photoelectron spectroscopy (XPS). Covalent immobilization of about 24 nm diameter of Au/Ag alloy nanocomposites on the Au film results in a large shift in resonance wavelength, which is due to the increase of the thickness of the sensing membrane, high dielectric constant of Au/Ag nanoparticles, and electromagnetic coupling between Au/Ag alloy nanocomposites and Au film. The SPR biosensor based on Au/Ag alloy nanocomposites exhibits a satisfactory response for human IgG in the concentration range of 0.15-40.00 μg mL⁻¹. While the biosensor based on Au nanoparticles shows a response in the concentration range of 0.30-20.00 μg mL⁻¹ and the biosensor based on Au film shows a response for human IgG in the concentration range of 1.25-20.00 μg mL⁻¹.     

Tin-copper mixed metal oxide nanowires: Synthesis and sensor response to chemical vapors

Tin-copper mixed metal oxide nanowires were successfully prepared by thermally oxidizing electrodeposited metallic nanowires (Sn-8 at.% Cu, Sn-43 at.% Cu and Sn-86 at.% Cu). The structure and composition of these nanowires before and after thermal oxidation were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectrometry (EDS), and X-ray diffraction (XRD). Dielectrophoresis was utilized to align the nanowires in contact with pre-fabricated interdigitated electrodes to form a chemiresistive gas sensor circuit. The sensitivity variation of the nanowires with different compositions was tested with acetone, ethanol and ethyl acetate vapors at different concentration levels, and the temperature effect was studied at five operating temperatures, ranging from 200 °C to 440 °C. All the three mixed metal oxide nanowire sensors exhibited higher sensitivity than that of pure tin oxide nanowire sensor. The sensor performance was also investigated in terms of response/recovery time and repeatability. An interesting positive/negative response was observed by varying the element composition of the mixed oxide nanowires.     

A stable sandwich-type amperometric biosensor based on poly(3,4-ethylenedioxythiophene)-single walled carbon nanotubes/ascorbate oxidase/nafion films for detection of L-ascorbic acid

In this paper, a stable sandwich-type amperometric biosensor based on poly(3,4-ethylenedioxythiophene) (PEDOT)-single walled carbon nanotubes (SWCNT)/ascorbate oxidase (AO)/Nafion films for detection of l-ascorbic acid (AA) was successfully developed. PEDOT-SWCNT nanocomposite and Nafion films were used as inner and outer films, respectively. AO was immobilized between these two films. The PEDOT-SWCNT nanocomposite films were characterized by electrochemical impedance spectroscopy and scanning electron microscopy. The influence of detection potential and temperature on the biosensor performance was examined in detail. Despite the multilayer configuration, the biosensor exhibited a relatively fast response (less than 10 s) and a linear range from 1 μM to 18 mM (a correlation coefficient of 0.9974). The sensitivity of the biosensor was found to be 28.5 mA M⁻¹ cm⁻². Its experimental detection limit was 0.7 μM (S/N = 3) and the apparent Michaelis-Menten constant (K_m) was calculated to be 18.35 mM. Moreover, the biosensor exhibited good anti-interferent ability and excellent long-term stability. All the results showed that such sandwich-type PEDOT-SWCNT/AO/Nafion films could provide a promising platform for the biosensor designs for AA detection.     

Gas sensing properties at room temperature of a quartz crystal microbalance coated with ZnO nanorods

Gas sensors based on a quartz crystal microbalance (QCM) coated with ZnO nanorods were developed for detection of NH₃ at room temperature. Vertically well-aligned ZnO nanorods were synthesized by a novel wet chemical route at a low temperature of 90 °C, which was used to grow the ZnO nanorods directly on the QCM for the gas sensor application. The morphology of the ZnO nanorods was examined by field-emission scanning electron microscopy (FE-SEM). The diameter and length of the nanorods were 100 nm and 3 μm, respectively. The QCM coated with the ZnO nanorods gas sensor showed excellent performance to NH₃ gas. The frequency shift (Δf) to 50 ppm NH₃ at room temperature was about 9.1 Hz. It was found that the response and recovery times were varied with the ammonia concentration. The fabricated gas sensors showed good reproducibility and high stability. Moreover, the sensor showed a high selectivity to ammoniac gas over liquefied petroleum gas (LPG), nitrous oxide (N₂O), carbon monoxide (CO), nitrogen dioxide (NO₂), and carbon dioxide (CO₂).     

Amplification of fluorescence emission of CdSe/ZnS QDs entrapped in a sol-gel matrix, a new approach for detection of trace level of PAHs

In this work, CdSe/ZnS core/shell QDs with emission wavelengths of 535 nm, 545 nm, 555 nm and 575 nm were synthesized and the ligands on their surface were exchanged with mercaptopropionic acid (MPA) to make them water-soluble. Hydrophilic QDs were incorporated into a sol-gel GA matrix of 3-aminopropyl trimethoxysilane (APTMS) and 3-glycidoxypropyl trimethoxysilane (GPTMS) to fabricate QD-entrapped membranes. The fluorescence intensity of the QDs entrapped in the sol-gel membrane was increased after being activated by the energy transfer from polycyclic aromatic hydrocarbon compounds (PAHs). The signal increase of the QDs was proportional to the increase in the concentration of the PAHs. Herein, trace levels of anthracene (ANT), phenanthrene (PHE) and pyrene (PYR) were detected through the enhancement of the fluorescence intensity of the CdSe/ZnS QD-entrapped membranes. The linear detection ranges were 0.01-0.1 μM for ANT and PHE and 0.005-0.05 μM for PYR. The QD-entrapped sol-gel membranes also showed quite good stability for the detection of PAHs over a period of 2 months.     

Gold nanoparticles-coated eggshell membrane with immobilized glucose oxidase for fabrication of glucose biosensor

This work reports the fabrication and application of a glucose biosensor based on the catalytic effect of gold nanoparticles (AuNPs) on enzymatic reaction for blood glucose determination. AuNPs were initially in situ synthesized on the surface of an eggshell membrane (ESM) which was subsequently immobilized with glucose oxidase (GO_x) to produce a GO_x-AuNPs/ESM. The GO_x-AuNPs/ESM was positioned on the surface of an oxygen electrode to form a GO_x-AuNPs/ESM glucose biosensor. The effects of pH, concentration of phosphate buffer solution and amount of GO_x on the response of the GO_x-AuNPs/ESM glucose biosensor were studied in detail. AuNPs on GO_x/ESM can improve the calibration sensitivity (30% higher than GO_x/ESM without AuNPs), stability (87.3% of its initial response to glucose after 10-week storage) and shortens the response time (<30 s) of the glucose biosensor. The linear working range for the GO_x-AuNPs/ESM glucose biosensor is 8.33 μM to 0.966 mM glucose with a detection limit of 3.50 μM (S/N = 3). The biosensor has been successfully applied to determine the glucose in human blood serum samples and the results compared well to a standard spectrophotometric method commonly used in hospitals. Our work demonstrates that the developed GO_x-AuNPs/ESM glucose biosensor has potential in biomedical analysis.     

Selective determination of urea using urease immobilized on ZnO nanowires

Well-aligned zinc oxide (ZnO) nanowire arrays were fabricated on gold-coated plastic substrates using a low-temperature aqueous chemical growth (ACG) method. The ZnO nanowire arrays with 50–130 nm diameters and ∼1 μm in lengths were used in an enzyme-based urea sensor through immobilization of the enzyme urease that was found to be sensitive to urea concentrations from 0.1 mM to 100 mM. Two linear sensitivity regions were observed when the electrochemical responses (EMF) of the sensors were plotted vs. the logarithmic concentration range of urea from 0.1 mM to 100 mM. The proposed sensor showed a sensitivity of 52.8 mV/decade for 0.1–40 mM urea and a fast response time less than 4 s was achieved with good selectivity, reproducibility and negligible response to common interferents such as ascorbic acid and uric acid, glucose, K⁺ and Na⁺ ions.     

An electrochemical biosensor for determination of hydrogen peroxide using nanocomposite of poly(methylene blue) and FAD hybrid film

An electrochemical biosensor for determination of hydrogen peroxide (H₂O₂) has been developed by the hybrid film of poly(methylene blue) and FAD (PMB/FAD). The PMB/FAD hybrid film was performed in PBS (pH 7) containing methylene blue and FAD by cyclic voltammetry. Repeatedly scanning potential range of −0.6-1.1 V, FAD was immobilized on the electrode surface by electrostatic interaction while methylene blue was electropolymerized on electrode surface. This modified electrode was found surface confined and pH dependence. It showed good electrocatalytic reduction for H₂O₂, KBrO₃, KIO₃, and NaClO as well as electrocatalytic oxidation for NADH. At an applied potential of −0.45 V vs. Ag/AgCl, the sensor showed a rapid and linear response to H₂O₂ over the range from 0.1 μM to 960 μM, with a detection limit of 0.1 μM and a significant sensitivity of 1109 μA mM⁻¹ cm⁻² (S/N = 3). It presented excellent stability at room temperature, with a variation of response current less than 5% over 30 days.     

Electrochemical behaviors and determination of isoniazid at ordered mesoporous carbon modified electrode

In this work, an electrochemical sensor based on ordered mesoporous carbon (OMC) for the amperometric detection of isoniazid was developed. OMC was dispersed in a solution of Nafion, and the suspension was modified onto the surface of glassy carbon (GC) electrode. Cyclic voltammetry and amperometry were used to investigate the electrochemical behaviors of isoniazid on Nafion-OMC modified electrode (Nafion-OMC/GC). The results indicate that OMC can facilitate the electrochemical oxidation of isoniazid with a great decrease of overpotential in pH 7.0 phosphate buffer solution. The proposed biosensor provides excellent performance towards the determination of isoniazid with a high sensitivity of 0.031 μA/μM, a low detection limit of 8.4 × 10⁻⁸ M and wide linear range from 1.0 × 10⁻⁷ M to 3.7 × 10⁻⁴ M at +0.20 V vs. Ag/AgCl. The method was successfully applied to the determination of isoniazid tablets with satisfying results. All the results suggest that Nafion-OMC/GC electrode is a potential candidate for a stable and efficient electrochemical sensor to detect isoniazid.     

Study of an amperometric glucose sensor based on Pd-Ni/SiNW electrode

An amperometric glucose sensor based on Pd-Ni/SiNW electrode has been investigated. The silicon nanowire (SiNW) electrodes were first fabricated by chemical etching, and then nickel and palladium particles were deposited onto the surfaces of SiNWs via electroless co-plating technique followed by annealing in nitrogen atmosphere at 350 °C for 300 s. The morphology of Pd-Ni/SiNW electrode was characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The sensor performance was characterized by cyclic voltammetry (CV) and fixed potential amperometry techniques. In 0.1 M KOH alkaline medium with different glucose concentrations, the sensor shows an excellent sensitivity of 190.72 μA mM⁻¹ cm⁻² with the detection limit (S/N ratio = 3) of 2.88 μM. And it also exhibits superior anti-interference properties to the species including ascorbic acid (AA), uric acid (UA) and 4-acetamidophenol (AP). All results demonstrate that this Pd-Ni/SiNW electrode is a candidate with great potential for glucose detection.     

An All-solid-state Cd-selective electrode with a low detection limit

A new all-solid-state Cd²⁺-selective electrode with a low detection limit was prepared by using conjugated thiophene oligomer α-sexithiophene (α-6T) as solid contact deposited between an ionophore-doped poly(vinyl chloride) membrane and a gold disc substrate. The electrode exhibited a Nernstian response for Cd²⁺ ions over a wide concentration range of 10⁻³-10⁻⁷ M with a detection limit as low as 1.3 × 10⁻⁸ M. Results showed that the fabricated potentiometric sensor was suitable for use within the pH range of 2.0-9.0 and exhibited good reproducibility for long-term measurements.