共查询到20条相似文献,搜索用时 9 毫秒
1.
We propose a method to implement a speckle-reduced coherent three-dimensional (3D) display system by a combination of integral imaging and photorefractive volume holographic storage. The 3D real object is imaged through the microlens array and stored in the photorefractive crystal. During the reconstruction process a phase conjugate reading beam is used to minimize aberration, and a rotating diffuser located on the imaging plane of the lens array is employed to reduce the speckle noise. The speckle-reduced 3D image with a wide viewing angle can be reconstructed by use of the proposed system. Experimental results are presented and optical parameters of the proposed system are discussed in detail. 相似文献
2.
I. A. Novikov 《Technical Physics Letters》1998,24(9):740-742
An analysis is made of the possibility of developing a new holographic multi-demultiplexer using the principle of a series
device constructed as a single three-dimensional optical wedge-shaped element.
Pis’ma Zh. Tekh. Fiz. 24, 79–86 (September 26, 1998) 相似文献
3.
In a conventional integral imaging system the viewing angle is limited by the f-number of the microlens. To overcome this limitation we employ a phase-conjugate beam to read out elemental images, which are stored in photorefractive volume holographic storage, while the rotating diffuser reduces the speckle noise. In the proposed system the viewing angle can be enhanced over the f-number limitation. Experimental results and discussions of viewing parameters are presented. 相似文献
4.
A novel approach for three-dimensional (3-D) display systems implemented with a micromirror array was proposed, designed, realized, and tested. The major advantages of this approach include the following: (1) micromirrors are reflective and hence achromatic (panchromatic), (2) a wide variety of displays can be used as image sources, and (3) time multiplexing can be introduced on top of space multiplexing to optimize the viewing zone arrangements. A two-view (left and right) 3-D autostereoscopic display system was first constructed. Left- and right-eye views in the forms of both still and motion 3-D scenes were displayed, and viewers were able to fuse the stereo information. A multiview (two left and two right) 3-D autostereoscopic display system was then simulated. 相似文献
5.
Optical implementation of a large-scale neural network with 32 x 32 neurons is reported. The experimental setup is described, error caused by limited precision of hardware is analyzed, and experimental results are presented. 相似文献
6.
Nonlinear chirped pulse compression can be theoretically achieved to any order by using a nonplane grating with adequate groove spacing. We evaluate the holographic recording of a grating that compensates to the quadratic chirp. A suitable design is found, and the building tolerances are analyzed. 相似文献
7.
A prism fingerprint sensor is described that uses a holographic grating glued to a right-angled prism. A light source normally illuminates the hypotenuse side of the prism with the finger pressed against the grating. The ridges and valleys of the finger are sensed on the basis of the principle of total internal reflection. The grating is used essentially to correct the distortion usually present with prism sensors. The quality of the fingerprint is very good: the pores on the ridges can be seen. 相似文献
8.
We have used a computer-generated holographic optical element (HOE) with electronic speckle pattern interferometry to calculate the interference phase corresponding to the deformation of a test object from a single TV frame. The HOE is a modified crossed phase grating that introduces a known phase change between the +/-1 diffracted orders, without being translated. The progressive propagation of transient mechanical waves was measured with an rms precision of 2pi/30. 相似文献
9.
We propose and test experimentally a new scheme to implement spatially multiplexed multiwavelength holographic memory. An electro-optically modulated phase grating array on LiNbO(3) substrate is used as a guided-wave interconnect to activate the reconfigurable reference beam. The object beam is provided by free-space interconnect. An electro-optic modulation efficiency of 18 +/- 2.5% is achieved with an applied voltage of 100 V. The reference beams with different diffraction angles can implement the angle-multiplexing holographic recording. We believe this is the first report of the implementation of guided-wave electro-optic interconnect together with free-space interconnect in holographic memory applications. 相似文献
10.
We propose a new function of the two-dimensional lens array that is composed of many gradient-index lenses. The array forms three-dimensional (3D) images. The characteristics of the 3D images depend on the length of the gradient-index lens. Especially, if the length of the lens is an odd-integer multiple of the half period of the optical path, 3D images are pseudoscopic with a reversed depth. The two lens arrays are positioned at a suitable distance, so that orthoscopic 3D images with the correct depth are formed in front of the lens array. 相似文献
11.
12.
Depth-enhanced three-dimensional integral imaging by use of multilayered display devices 总被引:1,自引:0,他引:1
Integral imaging is one of the promising three-dimensional display techniques and has many advantages. However, one disadvantage of integral imaging is the limited image depth. The image can be displayed only around the central depth plane. We propose a depth-enhanced integral imaging using multilayered display devices. We locate transparent display devices that use liquid crystal in parallel to each other and incorporate them into an integral imaging system. As a result, the proposed method has multiple central depth planes and permits the limitation of expressible depth to be overcome. The principle of the proposed method is explained, and some experimental results are presented. 相似文献
13.
We show that the Hough transform filter can be obtained easily byuse of rotational multiplexing. To demonstrate our methodexperimentally, we recorded the Hough transform filter for 18 discreteprojection angles and compared experimental transform results with simulated ones for a few input patterns. 相似文献
14.
We propose an enhanced three-dimensional (3D) integral imaging system using multiple display devices. Experimental results with double devices prove the improvement in the image depth for a given image quality. We present experiments on an enhanced 3D integral imaging system using double display devices, in which two 3D subimages that cover different depth ranges are separately generated in each device, and then they are combined with a beam splitter to reconstruct the whole 3D image with an enhanced depth of view. In a similar manner, the double-device system can also be used to obtain a wider viewing angle by combining two images with different viewing angle ranges. We discuss the possibility of 3D integral imaging systems using multiple display devices as extensions of the system with double display devices. 相似文献
15.
We propose a method to reduce the color moire fringes that are attributable to the structure of a color flat-panel display in integral three-dimensional imaging. The method uses two types of optical low-pass filter, diffuser and defocus. The effectiveness of the method was confirmed in an experiment. We describe a way to design these filters with moire's residual energy and video signal energy as indices and demonstrate the validity of the model, which combines two filters to reduce moire fringes. 相似文献
16.
A. Chirita 《Journal of Modern Optics》2013,60(10):854-858
The processes of micro-object hologram real-time recording on a photo-thermo-plastic carrier based on a chalcogenide glassy semiconductor As–Se–S–Sn system were studied. The possibility to measure micro-object dimensions using an interference fringe pattern was shown. Double-exposure hologram recording by use of photo-induced structural transformation processes in a photo-semiconductor and photo-thermoplastic recording process was investigated. 相似文献
17.
18.
One of the attractive features of hybrid holographic microscopy, in which the hologram of a microscopic object recorded by an image sensor is numerically reconstructed with a computer, is that the three-dimensional (3-D) information of a recorded object is obtained. The 3-D information has often been extracted by means of changing the reconstruction distance in the numerical reconstruction process, but here we describe an alternative technique that allows for variable viewing angles. That is, the perspective from which the object is viewed can be varied. The approximation used enables use of the fast-Fourier-transform algorithm for numerical reconstruction even in the high-resolution case in which the Fresnel approximation is no longer valid. The resolution of the proposed technique is also discussed. 相似文献
19.
We investigate the viewing angle enhancement of a lenticular three-dimensional (3D) display with a triplet lens array. The theoretical limitations of the viewing angle and view number of the lenticular 3D display with the triplet lens array are analyzed numerically. For this, the genetic-algorithm-based design method of the triplet lens is developed. We show that a lenticular 3D display with viewing angle of 120° and 144 views without interview cross talk can be realized with the use of an optimally designed triplet lens array. 相似文献
20.
We present the design and proof-of-concept demonstration of an optical device capable of producing true-time delay(s) (TTD)(s) for phased array antennas. This TTD device uses a free-space approach consisting of a single microelectromechanical systems (MEMS) mirror array in a multiple reflection spherical mirror configuration based on the White cell. Divergence is avoided by periodic refocusing by the mirrors. By using the MEMS mirror to switch between paths of different lengths, time delays are generated. Six different delays in 1-ns increments were demonstrated by using the Texas Instruments Digital Micromirror Device as the switching element. Losses of 1.6 to 5.2 dB per bounce and crosstalk of -27 dB were also measured, both resulting primarily from diffraction from holes in each pixel and the inter-pixel gaps of the MEMS. 相似文献