Adaptive-rate coding for frequency-hop communications over Rayleighfading channels

Because of the variability of the channels in frequency-hop wireless systems and networks, the performance of error-control coding can be improved by adapting the rate of the code to the channel conditions. In this paper, adaptive-rate error-control coding is investigated for slow frequency-hop communications with Reed-Solomon coding. Two methods are investigated that use decoder side information as a means for selecting the code rate. These methods are based on counts of errors and erasures, which are provided by the demodulator and the decoder. The performance of the adaptive-rate coding system is evaluated for channels with Rayleigh fading, partial-band interference, and thermal noise     

Joint coding-precoding with low-complexity turbo-decoding

We combine error-control coding with linear precoding (LP) for flat-fading channels, as well as for wireless orthogonal frequency-division multiplexing transmissions through frequency-selective fading channels. The performance is analyzed and compared with the corresponding error-control-coded system without precoding. By wedding LP with conventional error-control coding, the diversity order becomes equal to the error-control code's minimum Hamming distance times the precoder size. We also derive a low-complexity turbo-decoding algorithm for joint coded-precoded transmissions. We analyze the decoding complexity and compare it with an error-control-coded system without LP. Extensive simulations with convolutional and turbo codes for HiperLan/2 channels support the analysis and demonstrate superior performance of the proposed system.     

High-Rate Direct-Sequence Spread Spectrum With Error-Control Coding

High-rate direct-sequence (DS) spread spectrum is a modulation technique in which most or all of the spreading is provided by nonbinary data modulation. For applications to mobile ad hoc wireless networks, the limited processing gain of high-rate DS spread spectrum gives only modest protection against multiple-access or multipath interference, which limits the applicability of the modulation technique to fairly benign channels. In this paper, we explore the increased interference-rejection capability that can be obtained from convolutional coding with Viterbi decoding, Reed–Solomon coding with errors-and-erasures decoding, and block product coding with iterative decoding. For channels with multiple-access or multipath interference, performance results are given for several soft-decision decoding metrics, the benefits of adaptive-rate coding are illustrated, and the accuracy and utility of the Gaussian approximation are described. We also show how to use the bit-error probability for a system without error-control coding to determine which modulation method will give the best packet-error probability in a system with error-control coding.     

WaveVideo – An integrated approach to adaptive wireless video

The transmission of wireless video in acceptable quality is only possible by following an end-to-end approach. WaveVideo is an integrated, adaptive video coding architecture designed for heterogeneous wireless networks. It includes basic video compression algorithms based on wavelet transformations, an efficient channel coding, a filter architecture for receiver-based media scaling, and error-control methods to adapt video transmissions to the wireless environment. Using a joint source/channel coding approach, WaveVideo offers a high degree of error tolerance on noisy channels, still being competitive in terms of compression. Adaptation to channel conditions and user requirements is implemented on three levels. The coding itself features spatial and temporal measures to conceal transmission errors. Additionally, the amount of introduced error-control information is controlled by feedback. The video stream coding, applied to multicast capable networks, can serve different user's needs efficiently at the same time by scaling the video stream in the network according to receivers' quality requirements. The WaveVideo architecture is unique in terms of its capability to use QoS mapping and adaptation functions across all network nodes providing the same uniform interface.     

A wireless ATM MAC protocol with combined hybrid ARQ and adaptive scheduling with analysis

A combined hybrid automatic repeat request (ARQ) error control and adaptive scheduling scheme is proposed for time-division multiple access/time-division duplex medium access control (MAC) protocols in wireless asynchronous transfer mode (ATM) networks. Specifically, with the aid of proper channel modeling, the performance of various error-control schemes is evaluated. Accordingly, type-II hybrid ARQ is chosen as the error recovery scheme to combat fading effects, while adaptive fair-queueing is designed to achieve a fair and efficient resource allocation in wireless channels. In particular, the weight of a connection used in the fair-queueing algorithm dynamically adapts in terms of varying channel conditions and the types of services. Various simulations are conducted in typical indoor wireless ATM networks. It is shown that the proposed scheme can achieve a high throughput and transfer reliability with minimized delay and cell loss rate when compared with the conventional MAC layer control.     

采用空间分集的LDPC编码协作系统性能研究

为了提高无线通信系统的可靠性,将协作通信技术和空间分集技术都引入到传统的信道编码系统中,提出了更高质量的无线传输方法。采用全盲瑞利信道来模拟实际的无线通信环境,用自适应算法LMS和RLS分别对信道进行估计,并比较2种算法的收敛特性。理论分析和仿真均表明,在原有的仅采用信道编码技术的基础上,提出的新传输方法能使无线通信系统获得更高的可靠性。     

A MIMO-OFDM prototype for next-generation wireless WANs

Coupled with a robust and efficient OFDM air interface, MIMO technologies lead to a very compelling high-speed data downlink solution for future wireless systems. This article presents Nortel Networks' MIMO-OFDM concept prototype and measured performance results. This prototype has been developed in the framework of a Nortel Networks system concept for 3G evolution systems and next-generation wide area wireless networks. The prototype is based on a shared access MIMO-OFDM physical layer in the downlink, supporting adaptive modulation and coding, with peak rates up to 37 Mb/s. The uplink is based on an enhanced UMTS WCDMA physical layer. Performance for the high-speed downlink has been measured under various emulated fading conditions. The measured performance illustrates the robustness of OFDM in frequency-selective channels and high-speed mobility channels, supporting speeds as high as 200 km/h. The prototype can also be used for over-the-air assessment of the technology.     

空时编码在单天线UWB通信系统中的应用

超宽带(UWB)适用于基带多用户通信、战场无线通信和高数据率多媒体业务等通信系统,其数据传输速率高、功耗低、多径分辨能力强。但超宽带脉冲信号时域支撑区极窄,信道为密集多径,将空时编码技术引入超宽带通信系统,能够提升无线通信系统的信道容量与抗误比特率性能。在对UWB空时分组编码系统模型性能理论分析的基础上,对空时分组码在单天线UWB系统应用方案与UWB空时分层码方案进进行了简要介绍,利用Matlab对IEEEUWB信道模型进行仿真,提出了空时编码在UWB通讯技术中应用后提升短距高速率无线通信的性能的结论 。     

Adaptation of the code rate and transmitter power in frequency-hop communications

An adaptive transmission technique for frequency-hop packet transmission is described and its performance is evaluated for certain channels with unknown or time-varying parameters. The power in the transmitted signal and the rate of the error-control code are adapted in a way that provides energy-efficient communications. The slow-frequency-hop packet transmissions have several bits per hop and several hops per packet. Feedback is limited to a few bits in each acknowledgment packet, and the feedback for our adaptive transmission consists of only the counts of errors and erasures from the previous packet transmission. The performance of the adaptive transmission system is evaluated for channels with unknown but fixed partial-band interference and propagation loss and for certain channels with time-varying partial-band interference and propagation loss.     

Channel-quality-based opportunistic scheduling with ARQ in multi-rate wireless networks: modeling and analysis

In this paper, we develop a novel framework for analyzing radio link level performance for opportunistic scheduling with automatic repeat request (ARQ)-based error control in multi-rate wireless networks. The multi-rate transmission is assumed to be achieved through adaptive modulation and coding (AMC) to adjust the transmission rate according to the channel condition. The residual error effect due to each AMC setting is counteracted by means of a limited persistence ARQ protocol. The novelty of the proposed analytical framework lies in the fact that we are able to derive complete statistics (in terms of probability mass function) for both short-term and long-term performance measures such as system throughput, per-flow throughput, inter-success delay under both uncorrelated and correlated wireless channels. These performance measures can also be obtained in case of non-identical channels for different users. Analytical results are validated through simulations and the impacts of channel behavior on the different radio link level performance metrics are investigated.     

Combined turbo coding and unitary space-time modulation

Space-time coding is well understood for high data rate communications over wireless channels with perfect channel state information. On the other hand, channel coding for multiple transmit antennas when channel state information is unknown has only received limited attention. A new signaling scheme, named unitary space-time modulation, has been proposed for the latter case. In this paper, we consider the use of turbo coding together with unitary space-time modulation. We demonstrate that turbo coded space-time modulation systems are well suited to wireless communication systems when there is no channel state information, in the sense that the turbo coding improves the bit error rate (BER) performance of the system considerably. In particular, we observe that the turbo-coded system provides 10-15 dB coding gain at a BER of 10/sup -5/ compared to the unitary space-time modulation for various transmit and receive antenna diversity cases.     

联合自适应调制编码与ARQ的跨层设计

为了提高无线系统数据速率,目前广泛地采用物理层自适应调制编码(AMC)和链路层自动重发请求(ARQ)协议相结合的跨层设计,这种设计方法能大大提高系统频谱利用率。本文在瑞利衰落信道模型下,在给定包时延和丢包率的情况下,推导出了联合AMC和ARQ的跨层设计频谱利用率的公式。同时也与纯AMC和纯ARQ的情况作了比较。     

Adaptive Turbo Coded Modulation for Shallow Underwater Acoustic Communications

In this paper the performance of a wireless communications system over shallow underwater acoustic channels is investigated when adaptive modulation and coding techniques with receiver diversity are used. It is assumed that the communication system experiences Ricean shadowed fading. We obtain the analytical figures of the proposed rate-adaptive transmission schemes, emphasizing in the spectral efficiency and the average bit error rate. These analytical expressions are compared to Monte-Carlo simulations corroborating the analytical results.     

Modulated Coded OFDM Systems with Special Precoder

Orthogonal frequency-division multiplexing (OFDM) has been considered as a strong candidate for next-generation wireless communication systems to achieve high rate data transmission in a mobile environment. However, the performance of OFDM systems may be degraded when inter-symbol interference (ISI) channels have spectral nulls, and the data rate overhead due to the insertion of cyclic prefix is high when ISI channels have many taps. Recently, the precoded OFDM systems and vector OFDM (VOFDM) systems were proposed to combat these two problems, respectively. We propose a novel modulated coded OFDM system with special precoder that is robust to spectral nulls and with reduced cyclic prefix length. The precoder can be easily formulated by channel coding and digital modulation. This precoding scheme uses the redundancy information introduced by channel coding (such as zeros inserted in precoded OFDM system). It is able to remove the spectral nulls of an ISI channel without knowing the ISI. Simulation results show that our proposed OFDM system performance is better than precoded OFDM and VOFDM system.     

Space-time bit-interleaved coded modulation for OFDM systems

Space-time coding techniques significantly improve transmission efficiency in radio channels by using multiple transmit and/or receive antennas and coordination of the signaling over these antennas. Bit-interleaved coded modulation gives good diversity gains with higher order modulation schemes using well-known binary convolutional codes on a single transmit and receive antenna link. By using orthogonal frequency division multiplexing (OFDM), wideband transmission can be achieved over frequency-selective fading radio channels without adaptive equalizers. In this correspondence, we combine these three ideas into a family of flexible space-time coding methods. The pairwise error probability is analyzed based on the correlated fading assumption. Near-optimum iterative decoders are evaluated by means of simulations for slowly varying wireless channels. Theoretical evaluation of the achievable degree of diversity is also presented. Significant performance gains over the wireless local area network (LAN) 802.11a standard system are reported.     

Space-Time/Frequency Coding for MIMO-OFDM in Next Generation Broadband Wireless Systems

With the advent of next generation (4G) broadband wireless communications, the combination of multiple-input multiple-output (MIMO) wireless technology with orthogonal frequency division multiplexing (OFDM) has been recognized as one of the most promising techniques to support high data rate and high performance. In particular, coding over the space, time, and frequency domains provided by MIMO-OFDM will enable a much more reliable and robust transmission over the harsh wireless environment. In this article we provide an overview of space-time (ST) coding, space-frequency (SF) coding, and space-time-frequency (STF) coding for MIMO-OFDM systems. Performance results show that STF coding can achieve the maximum diversity gain in an end- to-end MIMO-OFDM system over broadband wireless channels. Furthermore, for orthogonal frequency division multiple access (OFDMA), we propose a multiuser SF coding scheme that can achieve the maximum diversity for each user while minimizing the interference introduced from all the other users.     

CDMA发射分集系统的多用户检测常模算法分析

空时分集技术的最大优点在于在不增加带宽的情况下可以提高系统的可靠性,是目前移动通信的研究热点.常模算法是一种性能优良的码分多址(CDMA)盲多用户检测技术,能确保判决信号与实际传送信号之间的差错较小,误码率性能良好.文中提出将标准线性受限常模算法(LCCMA)与空时分组码(STBC)相结合,设计出一种收敛快、能够改善系统性能的基于2-空时分组码的多用户接收机.     

Feedback-Detection Strategies for Adaptive Modulation Systems

This letter analyzes the performance of an adaptive modulation system, taking into account additive noise and fading on the feedback channel. It is shown that these feedback channel imperfections could significantly degrade the throughput gains of adaptive modulation over nonadaptive transmission. Specifically, feedback errors can result in an outage region in the low signal-to-noise ratio region. Two feedback receivers are proposed: one is based on the finite-state Markov channel model; and the other is a generalized Bayesian receiver. These receivers reduce the outage region due to feedback errors, and they can complement or be used as alternatives to error-control coding schemes.     

Frequency-hop transmission for satellite packet switching and terrestrial packet radio networks

The performance of frequency-hop transmission in a packet communication network is analyzed. Satellite multiple-access broadcast channels for packet switching and terrestrial packet radio networks are the primary examples of the type of network considered. An analysis of the effects of multiple-access interference in frequency-hop radio networks is presented. New measures of "local" performance are defined and evaluated for networks of this type, and new concepts that are important in the design of these networks are introduced. In particular, error probabilities and local throughput are evaluated for a frequency-hop radio network which incorporates the standard slotted and unslotted ALOHA channel-access protocols, asynchronous frequency hopping, and Reed-Solomon error-control coding. The performance of frequency-hop multiple access with error-control coding is compared with the performance of conventional ALOHA random access using narrow-band radios.     

一种改进的准正交空时分组码设计方案

基于MIMO天线系统的空时编码技术是改善无线通信性能、提高带限系统数据速率的一种理想选择。但是由于正交空时分组码不能保证数据全速率传输,为此提出一种改进的准正交空时分组码设计方案。该编码方法利用准正交准则,能够保证数据以全速率传输。并在此基础上具体讨论和分析了编码的编、译码算法和误码性能。该编码方法既不降低分集增益也不增加译码复杂度,并且可以获得一定的编码增益。仿真结果表明,这种方法的误比特率无论在低信噪比还是在高信噪比条件下都要优于已有的准正交空时分组码——Jafarkhani码。