Synthesis and characterization of polyimides from 4,4′-(3-(<Emphasis Type="Italic">tert</Emphasis>-butyl)-4-aminophenoxy)diphenyl ether

A novel diamine 4,4′-(3-(tert-butyl)-4-aminophenoxy)diphenyl ether (4) was synthesized from 2-tert-butylaniline and 4,4′-oxydiphenol through iodination, acetyl protection, coupling reaction and deacetylation protection. Then some polyimides (PIs) were obtained by one-pot polycondensation of diamne 4 with several commercial aromatic dianhydrides respectively. They all exhibit enhanced solubility in organic solvents (such as NMP, DMF, THF and CHCl₃ etc.) at room temperature. Their number-average molecular weights are in the range of (2.1–3.7)?×?10⁴ g/mol with PDI from 2.25 to 2.74 by GPC. They can form transparent, tough and flexible films by solution-casting. The light transparency of them is higher than 90% in the visible light range from 400 nm to 760 nm and the cut-off wavelengths of UV–vis absorption are below 370 nm. They also display the outstanding thermal stability with the 5% weight loss temperature from 525 °C to 529 °C in nitrogen atmosphere. The glass transition temperatures (T _g s) are higher than 264 °C by DSC. XRD results demonstrate that these PIs are amorphous polymers with the lower water absorption (<0.66%). In summary, the incorporation of tert-butyl groups and multiple phenoxy units into the rigid PI backbones can endow them excellent solubility and transparency with relatively high T _g s.     

l-Lysine-derived optically active poly(hydrazide-imide)s: synthesis, characterization and their application in removal of heavy metal ions

Six novel poly(hydrazide-imide)s (PHI _a–f ) were prepared from the reaction of a novel l-lysine-derived chiral diacid, ethyl l-lysine-N,N’-ditrimellitoyl diacide (1), with six synthetic dihydrazides by solution polycondensation. These polymers have inherent viscosities in the range of 0.22–0.45 dl g^?1, display optical activity, and are readily soluble in polar aprotic solvents. They start to decompose (T _10%) above 248 °C and display glass-transition temperatures at 164.37–210.20 °C. All the above polymers were fully characterized by UV, FT-IR, and ¹H NMR spectroscopy, TGA, DSC, inherent viscosity measurement and specific rotation.     

Silicon-containing halogenated poly(amides) derived from diacids with aminoacidic and imidic moieties in the side chain: synthesis,characterization, optical studies and thermal properties

New halogenated silicon-containing poly(amides) (PAs) derived from diacids and an aromatic diamine containing an Si atom were obtained according to the Yamazaki procedure. The diacids contain a preformed halogenated imide ring, another amide group and an aminoacidic residue. The diacids and the PAs were characterized by IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy, elemental analysis and, when corresponding, optical rotation. For those PAs containing F atoms in the imide ring, we also observed the signals corresponding to the coupling of the C–F atoms in the ¹³C MNR spectra. The results are in agreement with the proposed structures. Also, PAs without amino acid residues were synthesized according to the same procedure. PAs were soluble in aprotic polar solvents and some of them in m-cresol and THF, due to the inclusion in the structure of meta-substitution aromatic rings, flexible aminoacidic residue and polar C–Si bonds. The η _inh values were low, indicating the presence of oligomeric species of low molecular weight. The T _g values did not show a clear tendency about the influence of the nature of the amino acid residue, but when the influence of the halogen atoms was analyzed, it was possible to observe a decrease in the T _g values, due to the higher chain separation, and consequently the lower interactions between them. The thermal decomposition temperatures were determined at 10 % of weight loss, showing in general good values between 300 and 367 °C, and not showing a relationship between the values and the structure of the side groups. The transparency was studied observing moderate values at 400 nm, but showing 80 % of transparency between 500 and 550 nm, which was attributed to the higher aromatic content of these PAs. All PAs showed flame retardancy due to the presence of the halogen atoms.     

Polymerization of propylene catalyzed by α-diimine nickel complexes/methylaluminoxane: catalytic behavior and polymer properties

α-Diimine nickel dibromide complexes of dibromo[N,N’-bis(2,6-diisopropylphenyl)-2,3-butanediimine]nickel(II) (A) and dibromo[N,N’-(phenanthrene-9,10-diylidene)bis(2,6-diisopropylaniline)]nickel(II) (B) were synthesized under controlled conditions. The catalysts A, B and mixed of 1:1 weight ratio of them (C) were activated by methylaluminoxane and were used for propylene polymerization in a semi-batch reactor. In study of the catalytic systems behavior, activities, glass transition temperature (T _g) and viscosity average molecular weight (M _v) values related to the catalyst C were between those related to the catalysts A and B under same conditions. The highest and the lowest molecular weights of the obtained polymers were produced by the catalysts B and A which were about 80,000 and 70,000 (g/mol) under same conditions, respectively. The T _g of polypropylenes produced by the catalysts was about ?34 °C. The resulting polymers had similar behavior with ethylene-propylene copolymer which it could be due to formation of ethylene-type units in the polymer chain.     

Organosoluble and thermally stable modified poly(ether-imide-urethane)s bearing benzoxazole or benzothiazole pendent groups: synthesis and characterization

Preparation of new types of modified poly(ether-imide-urethane)s, P _O a-c and P _S a-c, with good thermal stability and improved solubility was investigated. Two new bis(ether-azide)s bearing benzoxazole or benzothiazole pendent groups were synthesized by treating 2-[3,5-bis(4-trimellitimido-phenoxy)-phenyl]benzoxazole (1 _O ), or 2-[3,5-bis(4-trimellitimido-phenoxy)-phenyl]benzothiazole (1 _S ) with ethyl chloroformate in the presence of triethylamine, and subsequent by a nucleophilic reaction with sodium azide, respectively. Two series of modified polymers with moderate inherent viscosities between 0.21 and 0.32 dL g^?1 were prepared from bis(ether-azide)s 2 _O and 2 _S with several aromatic diols in dry toluene under refluxing in the presence of 1,4-diazabicyclo[2.2.2]octane (DABCO, triethylenediamine) as a catalyst. The polycondensation reaction readily proceeded in desirable yields as one-pot reactions starting from 2 _O to 2 _S without the separate synthesis of the corresponding bis(ether-isocyanate)s. In addition, the corresponding unsubstituted poly(ether-imide-urethane)s, P _R a-c, were prepared under identical experimental conditions for comparative purposes. All of the resulted polymers were thoroughly characterized by spectroscopic methods and thermogravimetry. The solubilities of modified polymer in common organic solvents as well as their thermal stability were enhanced compared to these of the corresponding unmodified polymers. The glass transition temperature, 10 % weight loss temperature and char yields at 800 °C were, respectively, 13–28 °C, 19–32 °C and 3–7 % higher than those of the unmodified polymers.     

Oligomeric poly(imide-amides)s containing side 1,8-naphthalimidyl groups: synthesis and characterization

Poly(imide-amide)s (PIAs) were synthesized from isophthalic acids, which have in position 5 a bulky group like 1,8-naphthalimidyl bonded to amino acids as flexible spacers, and the diamine bis(4-aminophenyl)diphenylsilane, which provides a polar group in the main chain. Glycine, l-alanine, l-phenylalanine, l-valine and p-aminobenzoic acid were used as amino acids. Polymers were obtained according to the Yamazaki method and characterized by elemental analysis, optical activity, IR and ¹H, ¹³C and ²⁹Si NMR spectroscopy. PIAs were soluble in aprotic polar solvents but not in common organic solvents, and obtained with low η _inh values, which was an indicative of low molecular weights species, probably of oligomeric nature. According to the polymeric structure, the only difference between PIAs is the structure of the amino acid residue, and in this sense it was possible to see an increase of the T _g values when the volume of the amino acid residue also increased, due to the lower possibility of internal mobility of the side chains. The higher Tg value was obtained with the PIA-e, which includes an aromatic ring as a side chain, derived from p-aminobenzoic acid. PIAs, in spite of the good TDT values obtained, were not thermally stable in the sense that the 10 % of weight lost was obtained at lower temperature than 400 °C, with the exception of PIA-e derived from p-aminobenzoic acid. However, there was an increase of the TDT values when the volume of the amino acid residue increases. The PIAs do not show good UV–vis transparence probably due to the low free volume of those including an aliphatic amino acid residue.     

Simultaneous Growing of Two New Cd(II) Metal–Organic Frameworks with 2,6-Naphthalendicarboxylic Acid as New Precursors for Cadmium(II) Oxide Nanoparticles: Thermal, Topology and Structural Studies

Crystal structure and thermal stability of two new 3D Cd(II) metal–organic frameworks (MOF) containing 2,6-naphthalenedicarboxylate, [Cd(NDC)(DMF)], 1, and [Cd₃(NDC)₄], 2 (H₂NDC = 2,6-naphthalenedicarboxylic acid; DMF = N,N-dimethylformamide) have been studied. These two MOFs grow simultaneously within the same solution to give multiple crystals that are due to the general lability of Cd(II) complexes. Structure 1 shows a 3D neutral metal–organic framework with PtS topology and crystallizes in the triclinic system, space group P-1 (No. 2), whilst 2 crystallizes in the orthorhombic system, space group Fdd2 (No. 43) with body-centered cubic bcu-(4²⁴.6⁴) topology. The elongated nature of NDC results in large cavities in both compounds; however, the pores are filled by coordinated DMF molecules in 1. The thermal stability of 1 and 2 were studied by thermogravimetry and show stability to 400 °C for 1 and continuous weight loss for 2. CdO nanoparticles were prepared by direct calcination of 1 and 2 at 600 °C. The CdO nanoparticles were characterized by X-ray powder diffraction and its morphology were studied by scanning electron microscopy. The results show that the CdO is pure and has a uniform morphology.     

Polyamide derived from 4,4′-thiobis(methylene)dibenzoyl chloride and aliphatic diamine: interfacial synthesis and characterization

A series of processable semi-aromatic polyamides containing thioether and methylene units were synthesized through the reaction of 4,4′-thiobis(methylene)dibenzoyl chloride and aliphatic diamine by the method of interfacial polycondensation. These polyamides had excellent thermal properties with glass transition temperatures (T _g) of 104.3–130.6 °C, melting temperatures (T _m) of 300.3–303.8 °C, and initial degradation temperatures (T _d) of 405.2–410.3 °C. They had wider processing windows than traditional semi-aromatic polyamides (such as PA6T can not be processed by melting) and can be processed by melting method. They had better tensile strengths of 57.6–64.1 MPa, low-temperature mechanical properties, low water absorption of 0.19–0.27 %, low dielectric constants of 3.11–3.95 at 100 kHz, and better melt flowability properties of 232–60.7, 301.9–78.8, and 423.1–83.6 Pa s under a shear rate ranging from 20 to 1,170 s^?1, respectively. In addition, these polyamides showed good corrosion resistance, they did not dissolve in solvents such as NMP, DMSO, hydrochloric acid (6 mol/l), and solution of NaOH (1 mol/l) and so on.     

Synthesis and characterization of novel polyhydrazides containing pendant amide-imide-pyridine moiety

Eight novel polyhydrazides (PH _a4?Ch3 ) were prepared from the reaction of two novel diacids, 5-(2-(6-methyl pyridine-2-yl)-1,3-dioxo isoindoline-6-carboxamido) isophthalic acid (3) and 5-(2-(4-methyl pyridine-2-yl)-1,3-dioxo isoindoline-6-carboxamido) isophthalic acid (4), with four dihydrazides by interfacial polycondensation. These polymers have moderate inherent viscosities (0.12?C0.17?dL/g) and are readily soluble in polar aprotic solvents. They start to decompose (T _10%) above 187?°C and display glass transition temperatures in the range of 130.3?C156.3?°C. All polymers could be thermally converted into the corresponding polyoxadiazole approximately in the region of 250?°C, as evidenced by the DSC thermograms. All of the above polymers were fully characterized by FT-IR and ¹HNMR spectroscopy, TGA, DSC, and inherent viscosity measurement.     

Oxidation of Benzene Catalyzed by 2,2′-Bipyridine and 1,10-Phenantroline Cu(II) Complexes

The use of mononuclear Cu(II) 2,2′-bipyridine and 1,10-phenantroline complexes as catalysts in the oxidation of benzene, using hydrogen peroxide and tert-butyl hydroperoxide as oxidant in CH₃CN/H₂O solution is presented. The reactions were carried out at 25 and at 50 °C. The complexes [Cu(bipy)₃]Cl₂ · 6H₂O (1), [Cu(bipy)₂Cl]Cl · 5H₂O (2), [Cu(bipy)Cl₂] (3), [Cu(phen)₃]Cl₂ · 7H₂O (4), [Cu(phen)₂Cl]Cl · 5H₂O (5), [Cu(phen)Cl₂] (6) were able to oxidize benzene into phenol, hydroquinone and p-benzoquinone. Highest conversion (22%) was obtained using [Cu(Phen)Cl₂] (6) as catalyst.     

A Facile Access to New Polymethylmethacrylate-Anchored Ferrocene Substituted Nickel(II) Unsymmetrical Schiff Base Complexes: Synthesis and Characterization

This paper discloses two new side-chain metallopolymers containing an unsymmetrical organometallic Schiff base complex of Ni(II) linked to a polymethylmethacrylate (PMMA) matrix. The neutral ferrocene substituted Schiff base complex 1, Ni{CpFe(η⁵-C₅H₄)-C(O)CH=C(CH₃)N–o-C₆H₄N=CH-(2-O,5-OH-C₆H₃)} where (Cp = η⁵-C₅H₅), was synthesized via template reaction by condensation of the tridentate half-unit metalloligand Fc-C(O)CH=C(CH₃)-N(H)-o-C₆H₄NH₂ (Fc = ferrocenyl = CpFe(η⁵-C₅H₄)) with 2,5-dihydroxybenzaldehyde in the presence of nickel(II) acetate tetrahydrate. The binuclear Schiff base complex of Ni(II) containing an aromatic free hydroxyl group was reacted under basic conditions with PMMA to afford, upon trans-esterification reaction, metallopolymers 2 (complex 1 monomeric unit/PMMA = 1/5) and 3 (complex 1 monomeric unit/PMMA = 1/3). Elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopies, and cyclic voltammetry were utilized to characterize the newly synthetized compounds. Surface morphology of the metallopolymer film of 2 was studied using atomic force microscopy.     

Synthesis,characterization, and platinum-catalyzed cross-linking of 1,4-bis(1-methyl-1-silacyclobutyl) benzene,co-oligo(1-silacyclobut-1-ylidene-1,4-phenylene), and co-oligo(1-silacyclobut-1-ylidene-4,4′-diphenylene)

1,4-bis(1-Methyl-1-silacyclobutyl)benzene (I) has been prepared by the reaction of 1-chloro-1-methyl-1-silacyclobutane with the di-Grignard reagent prepared fromp-dibromobenzene. In a similar manner, co-oligo(1-silacyclobut-1-ylidene-1,4-phenylene) (II) and co-oligo(1-silacyclobut-1-ylidene-4,4′-biphenylene) (III) have been prepared by condensation oligomerization between 1,1-dichloro-1-silacyclobutane and the di-Grignard reagents prepared fromp-dibromobenzene and 4,4′-dibromobiphenyl, respectively. These have been characterized by¹H,¹³C, and²⁹Si NMR as well as FT-IR and UV spectroscopy. The molecular weight distributions of these co-oligomers have been determined by GPC. Their thermal stabilities have been evaluated by TGA. Thermal degradation of these co-oligomers in nitrogen gives high (60%) char yields. The stability of these chars in air has been determined. TheT _g's of these co-oligomers have been measured by DSC. Platinum-catalyzed ring opening of the silacyclobutane rings ofI,II, andIII cross-links these to thermoset materials. The bending moduli (logE′), tan δ, andT _g's of these materials have been determined by DMTA. The dielectric constant and dissipation factor of cross-linkedII are reported.     

A Series of Luminescent Lanthanide–Organic Complexes Constructed from In Situ Generated Dithiobenzoic Acid

Two types of lanthanide thiolato-carboxylate complexes, [Type I: [Yb(dtba) (Hdtba)] _n (1), Type II: [Ln(dtba)_1.5(biim)] _n (Ln = Pr (2a), Nd (2b), Sm (2c), Eu (2d), Gd (2e), Tb (2f), Dy (2g), H₂dtba = 2,2′-dithiodibenzoic acid, bimm = diimidazole)] have been obtained by hydrothermal method and characterized by the single-crystal X-ray diffraction, IR, 2D-COS IR, TG and the luminescence analysis. The H₂dtba ligand came from the in situ S–S function reaction of 2-mercaptobenzoic acid (H₂mba) under the hydrothermal condition. Complex 1 is a 2D bamboo-like sqr-topology layered structure, and the 3D (4, 4, 6)-connected supramolecular frameworks is produced by the hydrogen bonds of O–H···O. Complexes of type II (from 2a to 2g) are isostructural and they are assigned to 1D rope-like chains by introducing the chelating ligand of diimidazole. These 1D rope-like chains are further linked by N–H···O hydrogen bonds into a 3D supramolecular framework with CdSO₄-type topology. Photoluminescence studies reveal that complexes 2b, 2c, 2d, 2f, 2g exhibit strong lanthanide characteristic emission bands in the solid state at room temperature.     

Crystal Structures and Luminescent Properties of Two Lanthanide(III) Complexes Featuring Double-Stranded Helical Chains of Based on 2-Sulfoterephthalate

Hydrothermal reaction of Eu³⁺ and Dy³⁺ salts with monosodium 2-sulfoterephthalate (NaH₂stp) gives two 2D lanthanide coordination polymers, [Ln(stp)(H₂O)₂] _n (Ln = Eu (1) and Dy (2)). Single-crystal X-ray diffraction of the complexes reveal that both 1 and 2 crystallize in the triclinic crystal system of Pī space group. For 1, each Eu³⁺ ion lies in a 9-coordinated slightly distorted tri-capped triangle pyramidal configuration. The stp ligands adopt a μ ₄-type link to the metal ions to form a 2D layer-like structure, of which there exist the left- and right-handed double-stranded helical chains. For 2, each Dy³⁺ ion is in a 8-coordinated distorted bi-capped triangle pyramidal geometry. The double-stranded helical chains in 2 differ from those in 1. The thermal stabilities of the two compounds are studied by TGA. The solid state photoluminescence of 1 and 2 are reported. The fluorescent decay curves of the ligand and compounds indicate that 1 has the lifetime of 286.7 μs, τ ₁ = 0.51 ns and τ ₂ = 3.07 ns for the ligand, and for 2, τ ₁ = 0.53 ns and τ ₂ = 2.71 ns.     

Highly optically transparent/low color polyimide films prepared from hydroquinone- or resorcinol-based bis(ether anhydride) and trifluoromethyl-containing bis(ether amine)s

Two series of novel polyimides (5a-g and 6a-g) containing flexible ether linkages and pendent trifluoromethyl (CF₃) groups were synthesized from 1,4-bis(3,4-dicarboxyphenoxy)benzene dianhydride (3a) and 1,3-bis(3,4-dicarboxyphenoxy)benzene dianhydride (3b) with various CF₃-substituted aromatic bis(ether amine)s (4a-g) via ring-opening polyaddition to poly(amic acid)s, followed by thermal or chemical imidization. These polyimides were readily soluble in a variety of organic solvents and could be solution-cast into flexible and tough films. The cast films exhibited high optical transparency and almost no color, with a UV-vis absorption edge of 368-382 nm and a very low b^∗ value (a yellowness index) of 6.2-15.5. They had good thermal stability with glass-transition temperatures of 186-288 °C, and most of them did not show significant decomposition before 500 °C. Moreover, these polyimide films also possessed low dielectric constants of 2.79-3.49 (at 1 MHz) and low water uptakes (<0.65 wt%).     

Synthesis,Crystal Structures,Luminescence, Biological and Catalytic Properties of Two d10 Metal-Organic Coordination Polymers Constructed from Mixed Ligands

Two d¹⁰ metal-organic coordination polymers, [Cd₂(4-cpa)₄(bmip)₂]_n (1) and [Zn(4-cpa)₂(4,4′-bpy)]_n (2), [4-cpa = 4-chlorophenylacetate, bmip = 1,3-bis(2-methylimidazoly)propane, 4,4′-bpy = 4,4′-bipyridine], were hydrothermally synthesized and characterized by IR spectroscopy, elemental analysis, thermogravimetric analysis (TGA), powder X-ray diffraction and single-crystal X-ray diffraction. Single-crystal X-ray diffraction studies indicated that both 1 and 2 display analogous wave-like infinite chain structures. The two coordination polymers are further extended into 3D supramolecular structures through π···π stacking interactions and C–H···O hydrogen bonds for 1 and π···π stacking interactions, C–H···π stacking interactions and C–H···O hydrogen bonds for 2. Both 1 and 2 emit the intense blue luminescence at room temperature. The 4-Hcpa ligand and complexes 1 and 2 have been screened for their herbicidal activities against Brassica napus L. and Echinochloa crusgalli L. The results are compared with the activity of quizalofop-P-ethyl. Both compounds exhibit high catalytic properties on degradation of methyl orange in Fenton-like process.     

The First Two Examples of (R)-2-Chloromandelato Coordination Polymers: Synthesis,Structure, Magnetic and Ferroelectric Properties

Both (R)-2-Chloromandelato coordination polymers, [Cu(Clma)₂] _n 1 and [Mn(H₂O)(Clma)₂] _n 2, crystallizing in the polar chiral monoclinic space group P2₁ represent the first two examples of metal complexes with (R)-2-Chloromandelic acid (HClma) ligand. Through the (R)-2-Chloromandelate Clma^? ions, the penta- and hexa-coordinated metal atoms in 1 and 2 are linked into chains, _∞ ¹ {[Cu(Clma)](Clma)_2/2} _n and _∞ ¹ {[Mn(H₂O)(Clma)](Clma)_2/2} _n , respectively, and further assembled into 3D supramolecular architectures via hydrogen bonding and close packing interactions. They exhibit ferroelectricity (Pr = 0.03 and 0.01 μC cm^?2, Ec = 5.09 and 0.52 kV cm^?1, Ps = 0.10 and 0.17 μC cm^?2, respectively). The magnetic behaviors of 1 and 2 can be interpreted by means of a 1D chain model, where the magnetic exchanges are transmitted via carboxylate groups between metal atoms, and the best fit results in J = 2.97, ?0.15 cm^?1 for 1 and 2, suggesting ferromagnetic and antiferromagnetic interactions, respectively.     

Effect of an Ionic Liquid on the Catalytic Performance of Thiocyanatodioxomolybdenum(VI) Complexes for the Oxidation of Cyclooctene and Benzyl Alcohol

The complexes (PPh₄)₂[Mo^VIO₂(NCS)₄] (1), Mo^VIO₂(NCS)₂(di-tBu-bipy) (2) and Mo ₂ ^VI O₅(NCS)₂(di-tBu-bipy)₂ (3) (di-tBu-bipy = 4,4′-di-tert-butyl-2,2′-bipyridine) were studied as catalyst precursors for the oxidation of cyclooctene (Cy8) and benzyl alcohol (BzOH), using either dimethyl sulfoxide (DMSO) or tert-butyl hydroperoxide (TBHP) as oxidant. By dissolving complex 2 in the room temperature ionic liquid 1-butyl-3-methylpyridinium tetrafluoroborate, the catalytic performance with TBHP was improved (higher selectivity to the aldehyde and higher Cy8 conversions). For Cy8 oxidation, the unreacted substrate and products were easily extracted with n-hexane, and the ionic phase containing the catalyst could be reused without loss of catalytic performance.     

Preparation, Crystal Structure and Magnetic Properties of Two 1,2-Di(4-pyridyl)ethylene-Bridged Manganese(II) Complexes

Two polymeric carboxylato-bridged manganese(II) complexes, $ {}_{\infty }^{1} $ ∞ 1 [Mn(bpe)(NBA)₂] (1) and $ {}_{\infty }^{1} $ ∞ 1 [Mn(bpe)(MBA)₂] (2) (bpe = 1,2-di(4-pyridyl)ethylene; HNBA = m-nitrobenzoic acid; HMBA = m-methyl-benzoic acid), were synthesized and characterized. Compounds 1 and 2 are isostructural. X-ray diffraction studies show that the title compounds possess a double chain structure. The chains in 1 and 2 are assembled into 2-D layers via C–H···O hydrogen bonds interactions. Furthermore, owing to the offset face-to-face π–π stacking interactions, the adjacent 2-D layers embed into each other to form a 3-D supramolecular framework. Variable-temperature (2–300 K) magnetic susceptibility measurements show the presence of weak antiferromagnetic interactions between the high-spin Mn(II) (S = 5/2) ions through a carboxylato bridge with the best fit parameters for 1 being J = ?0.13 cm^?1, zJ′ = ?0.098 cm^?1 and for 2, J = ?0.33 cm^?1, zJ′ = ?0.001 cm^?1.     

Crystal Structures and Effect of Temperature on the Luminescence of Two Lanthanide Coordination Polymers with Twofold Interpenetrating pcu Topology

Two new lanthanide coordination polymers formulated as [Ln(BDC)_1.5(DMF)(H₂O)] _n [Ln = Tb (1), Gd (2)] [H₂BDC = 1,4-benzenedicarboxylic acid, DMF = N,N′-dimethylformamide] were synthesized under solvothermal conditions. The coordination polymers were characterized by IR spectroscopy, elemental analysis and X-ray single-crystal diffraction. The two coordination polymers are isostructural and exhibit twofold interpenetrating pcu three-dimensional open frameworks constructed by tetradentate ligand of H₂BDC. The fluorescence properties of 1 and 2 were investigated at 298 or 77 K both in solid state and in CH₂Cl₂ solvent dispersed as suspensions. Coordination polymer 1 exhibits characteristic Tb³⁺ ions emission transitions of ⁵D₄ → ⁷F _J (J = 6–2) at 77 or 298 K both in the solid-state and in CH₂Cl₂ solvent. Moreover, the vibrational structure of 1 is more defined at 77 K, which exhibits another two ⁵D₄ → ⁷F₁ and ⁵D₄ → ⁷F₂ transitions more than that at 298 K. The lifetimes of 1 are longer at 77 K (915.2 μs in the solid state and 874.11 μs in the CH₂Cl₂ solvent) than that at 298 K (866.31 μs in the solid state and 801.04 μs in the CH₂Cl₂ solvent), which may be caused by the increase of radiative rate and decrease of non-radiative rate at low temperature. The singlet excited state (28,653 cm^?1) and the lowest triplet energy level (23,641 cm^?1) of H₂BDC ligand were calculated based on the UV–Vis absorbance edges of ligand and the phosphorescence spectrum of Gd³⁺ coordination polymer (2) at 77 K, showing that the effective extent of energy transfer from H₂BDC ligand to Tb³⁺ ion. Finally, thermal behaviors of the two coordination polymers were studied by thermogravimetric analysis, which exhibit thermal stability to 250 °C.