Synthesis and characterization of blue-emitting Ir(III) complexes with multi-functional ancillary ligands for solution-processed phosphorescent organic light-emitting diodes

A series of Ir(III) complexes, (dfpmpy)₂Ir(pic), (dfpmpy)₂Ir(EO₂-pic), (dfpmpy)₂Ir(pic-N-O), and (dfpmpy)₂Ir(EO₂-pic-N-O), containing 2-(2,4-difluorophenyl)-4-methylpyridine (dfpmpy) based main ligand with varying ancillary ligands such as picolinic acid (pic), 4-(2-ethoxyethoxy)picolinic acid (EO₂-pic), picolinic acid N-oxide (pic-N-O), and 4-(2-ethoxyethoxy)picolinic acid N-oxide (EO₂-pic-N-O), respectively were successfully synthesized for highly efficient blue phosphorescent organic light-emitting diodes (PhOLEDs). The photophysical, electrochemical, and electroluminescent (EL) properties were systematically correlated. The solubilizing 2-ethoxyethanol (EO₂-) group was attached to the ancillary ligand through tandem reaction. All of the Ir(III) complexes show high thermal stability and good photoluminescence quantum yields (Ф_pl) in film state. Solution-processed PhOLEDs were fabricated using these Ir(III) complexes as dopants and achieved a maximum external quantum efficiency (EQE) of 10.9% and current efficiency of 21.15 cd/A for (dfpmpy)₂Ir(EO₂-pic). All the Ir(III) complexes emitted blue light with color purity at the Commission Internationale de L’Eclairage (CIE) coordinates of (0.15, 0.31).     

Efficient single layer RGB phosphorescent organic light-emitting diodes

We report efficient single layer red, green, and blue (RGB) phosphorescent organic light-emitting diodes (OLEDs) using a “direct hole injection into and transport on triplet dopant” strategy. In particular, red dopant tris(1-phenylisoquinoline)iridium [Ir(piq)₃], green dopant tris(2-phenylpyridine)iridium [Ir(ppy)₃], and blue dopant bis(3,5-difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl)iridium [FIrpic] were doped into an electron transporting 1,3,5-tris(N-phenylbenzimidazole-2-yl)benzene (TPBi) host, respectively, to fabricate RGB single layer devices with indium tin oxide (ITO) anode and LiF/Al cathode. It is found that the maximum current efficiencies of the devices are 3.7, 34.5, and 6.8 cd/A, respectively. Moreover, by inserting a pure dopant buffer layer between the ITO anode and the emission layer, the efficiencies are improved to 4.9, 43.3, and 9.8 cd/A, respectively. It is worth noting that the current efficiency of the green simplified device was as high as 34.6 cd/A, even when the luminance was increased to 1000 cd/m² at an extremely low applied voltage of only 4.3 V. A simple accelerated aging test on the green device also shows the lifetime decay of the simplified device is better than that of a traditional multilayered one.     

Highly efficient thienylquinoline-based phosphorescent iridium(III) complexes for red and white organic light-emitting diodes

Highly efficient 2-(thiophen-2-yl)quinoline-based phosphorescent iridium(III) complexes bearing 2-(3-(trifluoromethyl)-1H-1,2,4-triazol-5-yl)pyridine or picolinic acid as ancillary ligands are designed and synthetised. The variation of ancillary ligands is attempted to finely tune the photophysical properties of these complexes, especially the solution phosphorescent quantum yields (ΦPL), full width at half maximum (FWHM), etc. The picolinic acid-based complex displays the slightly red-shifted dual-peak emission compared to triazolpyridine-based one. The complexes show bright emission with broad FWHM up to 83 nm, and the emissions are in red region with the very high absolute ΦPL up to 0.76 in solution. Moreover, high-performance red and three-color-based white organic light-emitting diodes (OLEDs) with excellent color stability have been fabricated. The maximum external quantum efficiencies of red and white OLEDs can reach 16.2% and 15.1%, respectively. The maximum current efficiency and power efficiency of white OLED are as high as 35.5 cd A⁻¹ and 34.0 lm W⁻¹, respectively. Especially, the designed white OLED exhibits excellent spectral stability under wide operating voltage range, and the 1931 Commission Internationale de L'Eclairage of white OLED only changes from (0.43, 0.42) to (0.44, 0.44), the color rendering index is in a narrow range of 75–77.     

Charge conduction study of phosphorescent iridium compounds for organic light-emitting diodes application

The charge conduction properties of a series of iridium-based compounds for phosphorescent organic light-emitting diodes (OLEDs) have been investigated by thin-film transistor (TFT) technique. These compounds include four homoleptic compounds: Ir(ppy)₃, Ir(piq)₃, Ir(Tpa-py)₃, Ir(Cz-py)₃, and two heteroleptic compounds Ir(Cz-py)₂(acac) and FIrpic. Ir(ppy)₃, Ir(piq)₃ and FIrpic are commercially available compounds, while Ir(Tpa-py)₃, Ir(Cz-py)₃ and Ir(Cz-py)₂(acac) are specially designed to test their conductivities with respect to the commercial compounds. In neat films, with the exception of FIrpic, all Ir-compounds possess significant hole transporting capabilities, with hole mobilities in the range of about 5 × 10⁻⁶–2 × 10⁻⁵ cm² V⁻¹ s⁻¹. FIrpic, however, is non-conducting as revealed by TFT measurements. We further investigate how Ir-compounds modify carrier transport as dopants when they are doped into a phosphorescent host material CBP. The commercial compounds are chosen for the investigation. Small amounts of Ir(ppy)₃ and Ir(piq)₃ (<10%) behave as hole traps when they are doped into CBP. The hole conduction of the doped CBP films can be reduced by as much as 4 orders of magnitude. Percolating conduction of Ir-compounds occurs when the doping concentrations of the Ir-compounds exceed 10%, and the hole mobilities gradually increase as their values reach those of the neat Ir films. In contrast to Ir(ppy)₃ and Ir(piq)₃, FIrpic does not participate in hole conduction when it is doped into CBP. The hole mobility decreases monotonically as the concentration of FIrpic increases due to the increase of the average charge hopping distance in CBP.     

High triplet,bipolar polymeric hosts for highly efficient solution-processed blue phosphorescent polymer light-emitting diodes

Two polymeric hosts PCzTPP and PCzTPPO with twisted geometrical configurations for blue phosphorescent polymer light-emitting diodes (PhPLEDs) were designed and synthesized by incorporating electron-accepting carbazole units with electron-donating TPP/TPPO groups. This molecular design endows PCzTPP and PCzTPPO with high glass transition temperatures of 204 °C and 215 °C, high triplet energies of 2.72 eV and bipolar features. In addition, the HOMO and LUMO of these polymers matched well with the HOMO of the hole-transport layer and the Fermi level of cathode compared with PVK, which facilitated the injection of holes and electrons. PCzTPP- and PCzTPPO-based single-emissive-layer blue PhPLEDs were fabricated with simplified device configuration by solution process using FIrpic as a dopant. These devices exhibited lower turn on voltages (<8 V) than PVK-based devices (12 V). The maximum luminances of PCzTPP- and PCzTPPO-based devices were twofold and threefold that of PVK-based devices, and the maximum current efficiencies were nearly threefold and ninefold, respectively. Moreover, PCzTPPO-based solution processed blue PhPLEDs with improved configuration showed maximum current efficiency and external quantum efficiency of 14.5 cd/A and 6.6%, respectively.     

Tailoring electronic structure of organic host for high-performance phosphorescent organic light-emitting diodes

We investigated highly efficient phosphorescent organic light-emitting diodes (PHOLEDs) based on three novel 1,3,5-triazine derivatives as the host materials and two kinds of iridium complexes as the guests, respectively. For comparison, the devices using a common phosphorescent host 4,4′-N,N′-dicarbazolebiphenyl (CBP) have also been fabricated. Results show that the devices using 9-(4-(4,6-diphenyl-1,3,5-triazin-2-yl)phenyl)-9H-carbazole (PTC) and 4-(4,6-diphenoxy-1,3,5-triazin-2-yl)-N,N-diphenylaniline (POTA) as host have better performance than that of CBP. In comparison with the PHOLEDs based on CBP host, PTC- and POTA-based PHOLEDs show significantly lower driving voltages and higher power efficiencies. The high bipolar carrier mobility of the host is found to be critical to this kind of doping system, which would balance the injection of both carriers and improve efficiency.     

Phenylimidazole-based homoleptic iridium(III) compounds for blue phosphorescent organic light-emitting diodes with high efficiency and long lifetime

In order to obtain triplet emitters with high stability and efficiency, three homoleptic iridium(III) compounds — specifically, Ir(tpim)₃ (1), Ir(mtpim)₃ (2), and Ir(itpim)₃ (3), where tpim = 1-([1,1′:3′,1″-terphenyl]-2′-yl)-2-(4-fluorophenyl)-1H-imidazole, mtpim = 2-(4-fluorophenyl)-1-(5′-methyl-[1,1′:3′,1″-terphenyl]-2′-yl)-1H-imidazole, and itpim = 2-(4-fluorophenyl)-1-(5′-isopropyl-[1,1′:3′,1″-terphenyl]-2′-yl)-1H-imidazole — were prepared by one-pot reaction of the corresponding phenylimidazole ligand with an Ir(I) complex as a starting material. Compounds 1–3 emit bright sky-blue phosphorescence with λ_max = 459–463 nm and phosphorescent quantum efficiencies of 0.38–0.50. Multi-layer phosphorescent organic light-emitting diodes using compounds 1–3 as the triplet emitters and mCBP (3,3-di(9H-carbazol-9-yl)biphenyl) as the host have been fabricated. Compound 3 doped in the emissive layer demonstrate external quantum efficiency as high as 20.1% at 1000 cd/m². In addition, the device based on compound 1 as an emitter shows a stable lifetime greater than 300 h at 1000 cd/m², which is one of the best results concerning the device lifetime.     

Highly efficient phosphorescent organic light-emitting diodes using a homoleptic iridium(III) complex as a sky-blue dopant

Homoleptic triscyclometalated iridium(III) complex Ir(dbi)₃ was used as a dopant for sky blue phosphorescent organic light-emitting diodes (PHOLEDs). Its photophysical, thermal, electrochemical properties as well as the device performances were investigated. Ir(dbi)₃ exhibited high quantum yield of 0.52 in solution at room temperature. A maximum current efficiency and external quantum efficiency (EQE) of 61.5 cd A⁻¹ and 23.1% were obtained, which are the highest ever reported for blue homoleptic iridium complexes. High efficiencies of 53.5 cd A⁻¹ and 20.1% EQE were achieved even at the luminance of 1000 cd m⁻².     

Doping-free orange and white phosphorescent organic light-emitting diodes with ultra-simply structure and excellent color stability

We demonstrate simplified doping-free orange phosphorescent organic light-emitting diodes (OLEDs) based on ultrathin emission layer. The optimized orange device has the maximum current efficiency of 52.1 cd/A and power efficiency of 36.3 lm/W, respectively. Efficient simplified doping-free white OLEDs employing blue and orange ultrathin emission layers have excellent color stability, which is attributed to the avoidance of the movement of charges recombination zone and no differential color aging. One white device exhibits high efficiency of 33.6 cd/A (30.1 lm/W). Moreover, the emission mechanism of doping-free orange and white OLEDs is also discussed.     

Highly efficient phosphorescent organic light-emitting diodes using a beryllium metal–chelate complex as electron-transporting host material

A classical fluorescent metal–chelate complex bis(2-(2-hydroxyphenyl)-pyridine)beryllium (Bepp₂) has been used as an efficient electron-transporting host material to construct highly efficient phosphorescent organic light-emitting diodes (PHOLEDs) with an orange-emitting phosphorescent guest bis(7,8-benzoquinolinato) iridium (III) (N,N′-diisopropyl-benzamidine) ((bzq)₂Ir(dipba)). Due to the well-matched energy levels of Bepp₂ with the corresponding hole-/electron- transporting (HT/ET) materials and the high-efficiency and complete energy transfer of this host–guest system, the Bepp₂-based PHOLEDs exhibit rather low driving voltage (2.8 V) and high peak EL efficiencies of over 70 cd A⁻¹ for luminous efficiency, 55 lm W⁻¹ for power efficiency, and 23% for external quantum efficiency, a performance significantly better than that using CBP as the host.     

Phosphorescent dye-doped hole transporting layer for organic light-emitting diodes

Hole transport materials are critical to the performance of organic light-emitting diodes (OLEDs). While 1,1-bis(di-4-tolylaminophenyl)cyclohexane (TAPC) with a high triplet energy is widely used for high efficiency phosphorescent OLEDs, devices using TAPC as a hole transport layer (HTL) have a short operating lifetime due to the build-up of trapped charges at the TAPC/emitting layer (EML) interface during device operation. In this work, to solve the operating stability problem, instead of using conventional HTLs, we use a(fac-tris(2-phenylpyridine)iridium (III))(Ir(ppy)₃) doped layer as an HTL to replace the conventional HTLs. Because of the hole injecting and transporting abilities of the phosphorescent dye, holes can be directly injected into the emitting layer without an injection barrier. OLEDs based on a phosphorescent dye-doped HTL show significant improvement in operational stability without loss of efficiency.     

Efficient solution-processed blue phosphorescent organic light-emitting diodes with halogen-free solvent to optimize the emissive layer morphology

Efficient solution-processed blue phosphorescent organic light-emitting diodes (OLEDs) featuring with halogen-free solvent processing are fabricated in this study. The organic molecule 3,6-bis(diphenylphosphoryl)-9-(4′-(diphenylphosphoryl) phenyl)-carbazole (TPCz) that possesses good solubility in halogen-free polar solvents is selected to serve as the host of blue phosphorescent iridium(III) [bis(4,6-difluorophenyl)-pyridinato-N,C²]-picolinate (FIrpic) dopant. The morphology of the TPCz:FIrpic emissive layer prepared with different polar solvents including chlorobenzene (CB), n-butanol (ButA) and isopropanol (IPA) and the effect on their electroluminescent performance have been investigated in detail. It is found that the more polar halogen-free solvent IPA restrains the FIrpic aggregation and renders a more densely packed emissive layer as compared to the CB-processed counterpart, which results in the enhanced electroluminescent performance. The luminous efficiency and power efficiency of the blue phosphorescent OLEDs prepared with CB are merely 5.7 cd/A and 3.3 lm/W, respectively. When using more polar halogen-free solvent IPA, the efficiencies are enhanced to 22.3 cd/A and 15.6 lm/W, about 2.9 and 3.7-time increment, respectively. This work provides an approach to fabricate efficient solution-processed phosphorescent OLEDs with environmental-friendly solvents, which is highly required in large-scale solution-processed manufacturing.     

Deep blue phosphorescent organic light-emitting diodes with excellent external quantum efficiency

Highly efficient deep blue phosphorescent organic light-emitting diodes (PHOLEDs) using two heteroleptic iridium compounds, (dfpypy)₂Ir(acac) and (dfpypy)₂Ir(dpm), as a dopant and 9-(3-(9H-carbazol-9-yl)phenyl)-9H-carbazol-3-yl)diphenylphosphine oxide as a host material have been developed. The electroluminescent device of (dfpypy)₂Ir(dpm) at the doping level of 3 wt% shows the best performance with external quantum efficiency of 18.5–20.4% at the brightness of 100–1000 cd/m² and the color coordinate of (0.14, 0.18) at 1000 cd/m².     

Effect of coupling between excitons and gold nanoparticle surface plasmons on emission behavior of phosphorescent organic light-emitting diodes

Enhanced efficiency and reduced efficiency roll-off in phosphorescent organic light-emitting diodes (PhOLEDs) are realized by interposing a solution-processed gold nanoparticle (GNP)-based interlayer between the anode and the hole-injection layer. Transient photoluminescence measurements elucidate that a reduced lifetime of the triplet excitons was observed for samples having a GNP-interlayer as compared to a control sample without the GNP-interlayer. The decrease in the triplet exciton lifetime, caused by the coupling between the triplet excitons and the localized surface plasmons (LSPs) excited by the GNPs, enables reducing the triplet–triplet and triplet–polaron annihilation processes, thereby a reduced efficiency roll-off in PhOLEDs. The presence of a GNP-interlayer also acts as an optical out-coupling layer contributing to the efficiency enhancement and was demonstrated by the theoretical simulation.     

Efficient non-doped monochrome and white phosphorescent organic light-emitting diodes based on ultrathin emissive layers

Efficient red, orange, green and blue monochrome phosphorescent organic light-emitting diodes (OLEDs) with simplified structure were fabricated based on ultrathin emissive layers. The maximum efficiencies of red, orange, green and blue OLEDs are 19.3 cd/A (17.3 lm/W), 45.7 cd/A (43.2 lm/W), 46.3 cd/A (41.6 lm/W) and 11.9 cd/A (9.2 lm/W). Moreover, efficient and color stable white OLEDs based on two complementary colors of orange/blue, three colors of red/orange/blue, and four colors of red/orange/green/blue were demonstrated. The two colors, three colors and four colors white OLEDs have maximum efficiencies of 30.9 cd/A (27.7 lm/W), 30.3 cd/A (27.2 lm/W) and 28.9 cd/A (26.0 lm/W), respectively. And we also discussed the emission mechanism of the designed monochrome and white devices.     

High-performance green phosphorescent top-emitting organic light-emitting diodes based on FDTD optical simulation

We have successfully applied finite-difference time-domain (FDTD) method in top-emitting organic light-emitting diodes (TOLEDs) for structure optimization, demonstrating good agreement with experimental data. A mixed host with both hole transport and electron transport materials is employed for the green phosphorescent emitter to avoid charge accumulation and broaden the recombination zone. The resulting TOLEDs exhibit ultra-high efficiencies, low current efficiency roll-off, and a highly saturated color, as well as hardly detectable spectrum shift with viewing angles. In particular, a current efficiency of 127.0 cd/A at a luminance of 1000 cd/m² is obtained, and maintains to 116.3 cd/A at 10,000 cd/m².     

Novel spiro-based host materials for application in blue and white phosphorescent organic light-emitting diodes

Two novel spiro-based host materials, namely 3-(9,9′-spirobi[fluoren]-6-yl)-9-phenyl-9H-carbazole (SF3Cz1) and 9-(3-(9,9′-spirobi[fluoren]-6-yl)phenyl)-9H-carbazole (SF3Cz2) were designed and synthesized. Due to the meta-linkage of spirobifluorene backbone, both SF3Cz1 and SF3Cz2 possess triplet energies over 2.70 eV, indicating they could serve as suitable hosts for blue and even white phosphorescent organic light-emitting diodes (PHOLEDs). The fabricated bis(4,6-(difluorophenyl)-pyridinato -N,C′)picolinate (FIrpic) based PHOLEDs hosted by SF3Cz1 and SF3Cz2 exhibited excellent performance with maximum external quantum efficiencies (EQEs) of 18.1% and 19.7%, respectively. Two-color warm white PHOLEDs fabricated by utilizing SF3Cz1 and SF3Cz2 as hosts also achieved high EQEs and low efficiency roll-offs. The results demonstrate that SF3Cz1 and SF3Cz2 are promising hosts for blue and white PHOLEDs.     

High-efficiency and superior color-stability white phosphorescent organic light-emitting diodes based on double mixed-host emission layers

We demonstrate high-efficiency and superior color-stability white phosphorescent organic light-emitting diodes based on double blue mixed-host emission layers (EMLs) with different mixed ratios. The key feature of the concept is to introduce double blue mixed-host EMLs with an orange ultrathin layer sandwiched between them. The improved white device without spacer or interlayer achieves superior color-stability and reduced efficiency roll-off, which are consistent with the good ambipolar conductivity of the mixed-host layer. Moreover, peak efficiency of 40.8 lm/W and low turn-on voltage of 2.71 V are realized. The double mixed-host EMLs concept proves to be quite useful in achieving excellent device performance.     

Highly branched green phosphorescent tris-cyclometalated iridium(III) complexes for solution-processed organic light-emitting diodes

A series benzoimidazole-based dendritric complexes of iridium dendrimers containing Fréchet-type dendrons with peripheral fluorenyl surface groups have been synthesized. These iridium dendrimers are green-emitting with high phosphorescence quantum yield, and can be spin-coated as films of good quality. From cyclic voltammograms (CV), high onset potentials at 1.42–1.58 V due to the peripheral fluorene group were observed. Device from a second generation dendrimer 17 with structure of ITO/PEDOT:PSS/CBP: 20 wt% 17/TPBI/LiF/Al (PEDOT:PSS = poly(ethylene dioxythiophene): polystyrenesulfonate and CBP = bis(N-carbazolyl)biphenyl) has the best performance: maximum external quantum efficiency of 13.58% and maximum current efficiency of 45.7 cd/A. Space-charge-limited current (SCLC) flow technique was used to measure the mobility of charge carriers in the blend films of the compounds in CBP. Blend films of higher generation dendrimers have lower hole mobility, albeit with higher device efficiencies.     

Suppression of efficiency roll-off in highly efficient blue phosphorescent organic light-emitting devices using novel iridium phosphors with good electron mobility

High-efficiency blue organic light-emitting diodes were reported by adopting two novel iridium phosphors. Due to phosphoryl moiety in ancillary ligands, both complexes (dfppy)₂Ir(ppp) and (dfppy)₂Ir(dpp) (dyppy = 2-(2,4-difluorophenyl)pyridine, ppp = phenyl(pyridin-2-yl)phosphinate, dpp = dipyridinylphosphinate) own high electron mobility which can balance the injection and transport of carriers. Furthermore, the double light-emitting layers with TcTa (4,4′,4″-tris(carbazol-9-yl)triphenylamine) and 26DCzPPy (2,6-bis(3-(carbazol-9-yl)phenyl)pyridine) hosts broaden the exciton formation zone and suppress efficiency roll-off. The optimized double light-emitting layers devices exhibited decent performances with peak current efficiency near 50 cd/A and external quantum efficiency above 20% as well as negligible efficiency roll-off.