Hermite-neural-network-based adaptive control for a coupled nonlinear chaotic system

A TSK-type Hermite neural network (THNN) is studied in this paper. Since the output weights of the THNN use a functional-type form, it provides powerful representation, high learning performance and good generalization capability. Then, a Hermite-neural-network-based adaptive control (HNNAC) system which is composed of a neural controller and a robust compensator is proposed. The neural controller utilizes a THNN to online approximate an ideal controller, and the robust compensator is designed to eliminate the effect of the approximation error introduced by the neural controller upon the system stability. Moreover, a proportional-integral (PI)-type learning algorithm is derived to speed up the convergence of the tracking error. Finally, the proposed HNNAC system is applied to synchronize a coupled nonlinear chaotic system. In the simulation study, it shows that the proposed HNNAC system can achieve favorable synchronization performance without requiring a preliminary offline tuning.

     

Recurrent wavelet neural backstepping controller design with a smooth compensator

Recurrent wavelet neural network (RWNN) has the advantages in its dynamic responses and information storing ability. This paper develops a recurrent wavelet neural backstepping control (RWNBC) scheme for multiple-input multiple-output (MIMO) mechanical systems. This proposed RWNBC comprises a neural controller and a smooth compensator. The neural controller using an RWNN is the principal tracking controller utilized to mimic an ideal backstepping control law; and the parameters of RWNN are online tuned by the derived adaptation laws from the Lyapunov stability theorem. The smooth compensator is designed to dispel the approximation error introduced by the neural controller, so that the asymptotic stability of the closed-loop system can be guaranteed. Finally, two MIMO mechanical systems, a mass-spring-damper system and a two-inverted pendulum system, are performed to verify the effectiveness of the proposed RWNBC scheme. From the simulation results, it is verified that the proposed RWNBC scheme can achieve favorable tracking performance without any chattering phenomenon.     

基于函数滑模控制器的机械手轨迹跟踪控制

提出一种基于函数滑模控制器(FSMC)的控制策略,用于不确定机械手的轨迹跟踪控制。首先,由动力学模型和滑模函数得到系统的不确定项;然后,利用RBF神经网络逼近系统不确定项,由于神经网络逼近存在误差,而且在初始阶段误差较大,设计函数滑模控制器和鲁棒补偿项对神经网络逼近误差进行补偿,以克服普通滑模控制器容易引起的抖振问题,同时提高系统的跟踪控制性能。基于李亚普诺夫理论证明了闭环系统的全局稳定性,仿真实验也验证了方法的有效性。     

Specificity enhancement in classification of breast MRI lesion based on multi-classifier

In the conventional CMAC-based adaptive controller design, a switching compensator is designed to guarantee system stability in the Lyapunov stability sense but the undesirable chattering phenomenon occurs. This paper proposes a CMAC-based smooth adaptive neural control (CSANC) system that is composed of a neural controller and a saturation compensator. The neural controller uses a CMAC neural network to online mimic an ideal controller and the saturation compensator is designed to dispel the approximation error between the ideal controller and neural controller without any chattering phenomena. The parameter adaptive algorithms of the CSANC system are derived in the sense of Lyapunov stability, so the system stability can be guaranteed. Finally, the proposed CSANC system is applied to a Chua’s chaotic circuit and a DC motor driver. Simulation and experimental results show the CSANC system can achieve a favorable tracking performance. It should be emphasized that the development of the proposed CSANC system doesn’t need the knowledge of the system dynamics.     

基于自适应动态规划的非线性鲁棒近似最优跟踪控制

为克服现有近似最优跟踪控制方法只能跟踪连续可微参考输入的局限,本文针对一类具有未知动态的连续时间非线性时不变仿射系统,提出了一种新的基于自适应动态规划的鲁棒近似最优跟踪控制方法.首先采用递归神经网络建立系统模型,然后建立评价神经网络对最优性能指标进行估计,从而得到最优性能指标偏导数的估计值,进而得到近似最优跟踪控制器,最后利用系统输出与参考输入之间的跟踪误差设计鲁棒项对神经网络建模误差进行补偿.分别针对两个非线性系统进行仿真实验,仿真结果表明了所提方法的有效性和优越性.     

Design of an adaptive self-organizing fuzzy neural network controller for uncertain nonlinear chaotic systems

Though the control performances of the fuzzy neural network controller are acceptable in many previous published papers, the applications are only parameter learning in which the parameters of fuzzy rules are adjusted but the number of fuzzy rules should be determined by some trials. In this paper, a Takagi–Sugeno-Kang (TSK)-type self-organizing fuzzy neural network (TSK-SOFNN) is studied. The learning algorithm of the proposed TSK-SOFNN not only automatically generates and prunes the fuzzy rules of TSK-SOFNN but also adjusts the parameters of existing fuzzy rules in TSK-SOFNN. Then, an adaptive self-organizing fuzzy neural network controller (ASOFNNC) system composed of a neural controller and a smooth compensator is proposed. The neural controller using the TSK-SOFNN is designed to approximate an ideal controller, and the smooth compensator is designed to dispel the approximation error between the ideal controller and the neural controller. Moreover, a proportional-integral (PI) type parameter tuning mechanism is derived based on the Lyapunov stability theory, thus not only the system stability can be achieved but also the convergence of tracking error can be speeded up. Finally, the proposed ASOFNNC system is applied to a chaotic system. The simulation results verify the system stabilization, favorable tracking performance, and no chattering phenomena can be achieved using the proposed ASOFNNC system.     

Adaptive neural complementary sliding-mode control via functional-linked wavelet neural network

Chaos control can be applied in the vast areas of physics and engineering systems, but the parameters of chaotic system are inevitably perturbed by external inartificial factors and cannot be exactly known. This paper proposes an adaptive neural complementary sliding-mode control (ANCSC) system, which is composed of a neural controller and a robust compensator, for a chaotic system. The neural controller uses a functional-linked wavelet neural network (FWNN) to approximate an ideal complementary sliding-mode controller. Since the output weights of FWNN are equipped with a functional-linked type form, the FWNN offers good learning accuracy. The robust compensator is designed to eliminate the effect of the approximation error introduced by the neural controller upon the system stability in the Lyapunov sense. Without requiring preliminary offline learning, the parameter learning algorithm can online tune the controller parameters of the proposed ANCSC system to ensure system stable. Finally, it shows by the simulation results that favorable control performance can be achieved for a chaotic system by the proposed ANCSC scheme.     

Neural-network-based robust adaptive control for a class of nonlinear systems

In this study, a robust adaptive control (RAC) system is developed for a class of nonlinear systems. The RAC system is comprised of a computation controller and a robust compensator. The computation controller containing a radial basis function (RBF) neural network is the principal controller, and the robust compensator can provide the smooth and chattering-free stability compensation. The RBF neural network is used to approximate the system dynamics, and the adaptive laws are derived to on-line tune the parameters of the neural network so as to achieve favorable estimation performance. From the Lyapunov stability analysis, it is shown that all signals in the closed-loop RBAC system are uniformly ultimately bounded. To investigate the effectiveness of the RAC system, the design methodology is applied to control two nonlinear systems: a wing rock motion system and a Chua’s chaotic circuit system. Simulation results demonstrate that the proposed RAC system can achieve favorable tracking performance with unknown of the system dynamics.     

Adaptive dynamic CMAC neural control of nonlinear chaotic systems with L2 tracking performance

The advantage of using cerebellar model articulation control (CMAC) network has been well documented in many applications. However, the structure of a CMAC network which will influence the learning performance is difficult to select. This paper proposes a dynamic structure CMAC network (DSCN) which the network structure can grow or prune systematically and their parameters can be adjusted automatically. Then, an adaptive dynamic CMAC neural control (ADCNC) system which is composed of a computation controller and a robust compensator is proposed via second-order sliding-mode approach. The computation controller containing a DSCN identifier is the principal controller and the robust compensator is designed to achieve L₂ tracking performance with a desired attenuation level. Moreover, a proportional–integral (PI)-type adaptation learning algorithm is derived to speed up the convergence of the tracking error in the sense of Lyapunov function and Barbalat’s lemma, thus the system stability can be guaranteed. Finally, the proposed ADCNC system is applied to control a chaotic system. The simulation results are demonstrated that the proposed ADCNC scheme can achieve a favorable control performance even under the variations of system parameters and initial point.     

基于光流的四旋翼直升机鲁棒自主着陆控制

针对小型四旋翼无人机自主着陆问题,提出了一种基于光流的高度估计方法和基于信号补偿的高度鲁棒控制器设计方法.首先从通用光流运动模型出发,采用奇异值分解方法求解无人机线速度和深度的比值,通过对垂直速度和高度比值积分获得高度数据.其次,将考虑地效影响和其它不确定性的高度通道非线性模型分解为标称线性模型和等效扰动两部分,并设计基于信号补偿的高度鲁棒控制器,该控制器由标称控制器和鲁棒补偿器组成,其中标称控制器使得标称闭环系统达到期望的高度跟踪特性,鲁棒补偿器用于抑制等效扰动的影响.最后从理论上证明了该控制器可以保证高度跟踪误差在有限时间内收敛至指定的原点邻域内.四旋翼无人机自主着陆的实验结果验证了所提出的基于光流的高度估计和鲁棒控制方法的有效性.     

FPGA‐based adaptive dynamic sliding‐mode neural control for a brushless DC motor

In the adaptive neural control design, since the number of hidden neurons is finite for real‐time applications, the approximation errors introduced by the neural network cannot be inevitable. To ensure the stability of the adaptive neural control system, a switching compensator is designed to dispel the approximation error. However, it will lead to substantial chattering in the control effort. In this paper, an adaptive dynamic sliding‐mode neural control (ADSNC) system composed of a neural controller and a fuzzy compensator is proposed to tackle this problem. The neural controller, using a radial basis function neural network, is the main controller and the fuzzy compensator is designed to eliminate the approximation error introduced by the neural controller. Moreover, a proportional‐integral‐type adaptation learning algorithm is developed based on the Lyapunov function; thus not only the system stability can be guaranteed but also the convergence of the tracking error and controller parameters can speed up. Finally, the proposed ADSNC system is implemented based on a field programmable gate array chip for low‐cost and high‐performance industrial applications and is applied to control a brushless DC (BLDC) motor to show its effectiveness. The experimental results demonstrate the proposed ADSNC scheme can achieve favorable control performance without encountering chattering phenomena. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

基于不确定性机器人的跟踪控制策略研究

针对不确定刚体连杆机器人在动力学建模时参数不精确以及未被考虑的干扰因素可能引起的控制系统品质的恶化问题,提出一种轨迹跟踪控制方案。控制器由基于标称模型设计的计算力矩控制器和基于不确定性因素设计的鲁棒跟踪补偿控制器组成,结构比较简单。计算力矩控制器使标称系统跟踪期望轨迹;鲁棒补偿控制器则用于消除参数误差带来的不确定性影响。理论分析和仿真证明了控制方法的有效性。     

Nonlinear Decoupling PID Control Using Neural Networks and Multiple Models

For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential （PID） controller is proposed, which consists of a traditional PID controller, a decoupling compensator and a feedforward compensator for the unmodeled dynamics. The parameters of such controller is selected based on the generalized minimum variance control law. The unmodeled dynamics is estimated and compensated by neural networks, a switching mechanism is introduced to improve tracking performance, then a nonlinear decoupling PID control algorithm is proposed. All signals in such switching system are globally bounded and the tracking error is convergent. Simulations show effectiveness of the algorithm.     

Nonlinear Decoupling PID Control Using Neural Networks and Multiple Models

For a class of complex industrial processes with strong nonlinearity, serious coupling and uncertainty, a nonlinear decoupling proportional-integral-differential (PID) controller is proposed, which consists of a traditional PID controller, a decoupling compensator and a feedforward compensator for the unmodeled dynamics. The parameters of such controller is selected based on the generalized minimum variance control law. The unmodeled dynamics is estimated and compensated by neural networks, a switching mechanism is introduced to improve tracking performance, then a nonlinear decoupling PID control algorithm is proposed. All signals in such switching system are globally bounded and the tracking error is convergent. Simulations show effectiveness of the algorithm.     

Intelligent complementary sliding-mode control with dead-zone parameter modification

This paper proposes an intelligent complementary sliding-mode control (ICSMC) system which is composed of a computed controller and a robust controller. The computed controller includes a neural dynamics estimator and the robust compensator is designed to prove a finite L₂-gain property. The neural dynamics estimator uses a recurrent neural fuzzy inference network (RNFIN) to approximate the unknown system term in the sense of the Lyapunov function. In traditional neural network learning process, an over-trained neural network would force the parameters to drift and the system may become unstable eventually. To resolve this problem, a dead-zone parameter modification is proposed for the parameter tuning process to stop when tracking performance index is smaller than performance threshold. To investigate the capabilities of the proposed ICSMC approach, the ICSMC system is applied to a one-link robotic manipulator and a DC motor driver. The simulation and experimental results show that favorable control performance can be achieved in the sense of the L₂-gain robust control approach by the proposed ICSMC scheme.     

Adaptive recurrent neural network control using a structure adaptation algorithm

This paper proposes an adaptive recurrent neural network control (ARNNC) system with structure adaptation algorithm for the uncertain nonlinear systems. The developed ARNNC system is composed of a neural controller and a robust controller. The neural controller which uses a self-structuring recurrent neural network (SRNN) is the principal controller, and the robust controller is designed to achieve L ² tracking performance with desired attenuation level. The SRNN approximator is used to online estimate an ideal tracking controller with the online structuring and parameter learning algorithms. The structure learning possesses the ability of both adding and pruning hidden neurons, and the parameter learning adjusts the interconnection weights of neural network to achieve favorable approximation performance. And, by the L ² control design technique, the worst effect of approximation error on the tracking error can be attenuated to be less or equal to a specified level. Finally, the proposed ARNNC system with structure adaptation algorithm is applied to control two nonlinear dynamic systems. Simulation results prove that the proposed ARNNC system with structure adaptation algorithm can achieve favorable tracking performance even unknown the control system dynamics function.     

Adaptive neural network output feedback control for flexible multi-link robotic manipulators

In this paper, a novel approach for adaptive control of flexible multi-link robots in the joint space is presented. The approach is valid for a class of highly uncertain systems with arbitrary but bounded dimension. The problem of trajectory tracking is solved through developing a stable inversion for robot dynamics using only joint angles measurement; then a linear dynamic compensator is utilised to stabilise the tracking error for the nominal system. Furthermore, a high gain observer is designed to provide an estimate for error dynamics. A linear in parameter neural network based adaptive signal is used to approximate and eliminate the effect of uncertainties due to link flexibilities and vibration modes on tracking performance, where the adaptation rule for the neural network weights is derived based on Lyapunov function. The stability and the ultimate boundedness of the error signals and closed-loop system is demonstrated through the Lyapunov stability theory. Computer simulations of the proposed robust controller are carried to validate on a two-link flexible planar manipulator.     

变结构神经网络自适应鲁棒控制

针对一类不确定非线性系统, 提出一种变结构神经网络自适应鲁棒控制(Variable structure neural network adaptive robust control, VSNNARC)方法. 其中变结构神经网络用于在线辨识系统未知非线性函数, 该网络利用节点激活与催眠技术进行动态调节, 减小网络规模与计算量; 自适应鲁棒控制用于网络权值学习与系统建模误差及外部扰动补偿. 采用Lyapunov稳定性分析法, 给出网络权值自适应律的形式以及鲁棒控制项的设计方法. 该方法不仅能保证系统的稳定性, 也能保证系统具有很好的瞬态性能. 将该方法应用到转台伺服系统的位置跟踪控制中, 实际运行结果表明, 该方法使系统具有很强的鲁棒性及良好的跟踪效果.     

Indirect adaptive self-organizing RBF neural controller design with a dynamical training approach

This study proposes an indirect adaptive self-organizing RBF neural control (IASRNC) system which is composed of a feedback controller, a neural identifier and a smooth compensator. The neural identifier which contains a self-organizing RBF (SORBF) network with structure and parameter learning is designed to online estimate a system dynamics using the gradient descent method. The SORBF network can add new hidden neurons and prune insignificant hidden neurons online. The smooth compensator is designed to dispel the effect of minimum approximation error introduced by the neural identifier in the Lyapunov stability theorem. In general, how to determine the learning rate of parameter adaptation laws usually requires some trial-and-error tuning procedures. This paper proposes a dynamical learning rate approach based on a discrete-type Lyapunov function to speed up the convergence of tracking error. Finally, the proposed IASRNC system is applied to control two chaotic systems. Simulation results verify that the proposed IASRNC scheme can achieve a favorable tracking performance.     

Adaptive complementary sliding-mode control for thrust active magnetic bearing system

An adaptive complementary sliding-mode control (ACSMC) system with a multi-input-multi-output (MIMO) recurrent Hermite neural network (RHNN) estimator is proposed to control the position of the rotor in the axial direction of a thrust active magnetic bearing (TAMB) system for the tracking of various reference trajectories in this study. First, the operating principles and dynamic model of the TAMB system using a linearized electromagnetic force model is derived. Then, a conventional sliding-mode control (SMC) system is designed for the tracking of various reference trajectories. Moreover, a complementary sliding-mode control (CSMC) system is adopted to reduce the guaranteed ultimate bound of the tracking error by half while using the saturation function as compared with the SMC. Furthermore, since the system parameters and the external disturbance are highly nonlinear and time-varying, the ACSMC is proposed to further improve the control performance and increase the robustness of the TAMB system. In the ACSMC, the MIMO RHNN estimator with estimation laws is proposed to estimate two complicated dynamic functions of the system on-line. In addition, a robust compensator is proposed to confront the minimum approximated errors and achieve the robustness. Finally, some experimental results for the tracking of various reference trajectories show that the control performance of the ACSMC is significantly improved comparing with the SMC and CSMC.