Photo-patternable polyimide gate insulator with fluorine groups for improving performance of 2,7-didecyl[1]benzothieno[3,2-b][1]benzothiopene (C10-BTBT) thin-film transistors

Surface properties of gate insulators strongly affect the device performance of organic thin-film transistors (OTFTs). To improve the performance of OTFTs, we have developed photo-sensitive polyimide gate insulator with fluorine groups. The polyimide gate insulator film could be easily patterned by selective UV exposure without any photoinitiator. The polyimide gate insulator film, fabricated at 130 °C, has a dielectric constant of 2.8 at 10 kHz, and leakage current density of <1.6 × 10^?10 A/cm² while biased from 0 to 90 V. To investigate the potential of the polyimide with fluorine groups as a gate insulator, we fabricated C₁₀-BTBT TFTs. The field-effect mobility and the on/off current ratio of the TFTs were measured to be 0.76 ± 0.09 cm²/V s and >10⁶, respectively.     

High-performance n-type organic field-effect transistors fabricated by ink-jet printing using a C60 derivative

We report on the performance of ink-jet-printed n-type organic thin-film transistors (OTFTs) based on a C₆₀ derivative, namely, C₆₀-fused N-methyl-2-(3-hexylthiophen-2-yl)pyrrolidine (C₆₀TH-Hx). The new devices exhibit excellent n-channel performance, with a highest mobility of 2.8 × 10^?2 cm² V^?1 s^?1, an I_On/I_Off ratio of about 1 × 10⁶, and a threshold voltage of 7 V. The C₆₀TH-Hx films show large crystalline domains that result from the influence of an evaporation-induced flow, thus leading to high electron mobility in the ink-jet-printed devices.     

High performance electric-double-layer amorphous IGZO thin-film transistors gated with hydrated bovine serum albumin protein

Device performance of amorphous indium gallium zinc oxide (a-IGZO) thin film transistors (TFTs) has been improved greatly by using bovine serum albumin (BSA) as the top gate dielectric. BSA is a natural protein with acidic and basic amino acid residues, which is easily hydrated in air ambient. A typical a-IGZO TFT with hydrated BSA as the top gate dielectric exhibits a field-effect mobility (μ_FE) value of 113.5 cm² V⁻¹ s⁻¹ in saturation regime and a threshold voltage (V_TH) value of 0.25 V in air ambient. The excellent device performance can be well explained by the formation of electric double layers (EDLs) near the interfaces of a-IGZO/hydrated BSA and hydrated BSA/gate electrode. The reliability issue of a-IGZO TFTs gated with hydrated BSA has been also investigated by using the life time test without encapsulation. The V_TH value increases and μ_FE,sat value reduces slightly for the a-IGZO TFT and remain stabilized over 60 days.     

Self-aligned inversion n-channel In0.2Ga0.8As/GaAs metal–oxide–semiconductor field-effect-transistors with TiN gate and Ga2O3(Gd2O3) dielectric

A self-aligned process for fabricating inversion n-channel metal–oxide–semiconductor field-effect-transistors (MOSFET’s) of strained In_0.2Ga_0.8As on GaAs using TiN as gate metal and Ga₂O₃(Gd₂O₃) as high κ gate dielectric has been developed. A MOSFET with a 4 μm gate length and a 100 μm gate width exhibits a drain current of 1.5 mA/mm at V_g = 4 V and V_d = 2 V, a low gate leakage of <10^?7 A/cm² at 1 MV/cm, an extrinsic transconductance of 1.7 mS/mm at V_g = 3 V, V_d = 2 V, and an on/off ratio of ～10⁵ in drain current. For comparison, a TiN/Ga₂O₃(Gd₂O₃)/In_0.2Ga_0.8As MOS diode after rapid thermal annealing (RTA) to high temperatures of 750 °C exhibits excellent electrical and structural performances: a low leakage current density of 10^?8–10^?9 A/cm², well-behaved capacitance–voltage (C–V) characteristics giving a high dielectric constant of ～16 and a low interfacial density of state of ～(2～6) × 10¹¹ cm^?2 eV^?1, and an atomically sharp smooth Ga₂O₃(Gd₂O₃)/In_0.2Ga_0.8As interface.     

Pentacene organic thin-film transistors with solution-based gelatin dielectric

Gelatin is a natural protein in the field of food, pharmaceutical and tissue engineering, which works very well as the gate dielectric for pentacene organic thin-film transistors (OTFTs). An aqueous solution process has been applied to form a gelatin thin film on poly(ethylene terephthalate) (PET) or glass by spin-coating and subsequent casting. The device performance of pentacene OTFTs depend on the bloom number (molecular weight) of gelatin. The pentacene OTFT with 300 bloom gelatin as the gate dielectric in air ambient exhibits the best performance with an average field-effect mobility (μ_FE) value of ca. 16 cm² V^?1 s^?1 in the saturation regime and a low threshold voltage of ?1 V. The high performance of the pentacene OTFT in air ambient is attributed to the water resided in gelatin. The crystal quality of pentacene is not the key factor for the high performance.     

A high-yield vacuum-evaporation-based R2R-compatible fabrication route for organic electronic circuits

Advances are described in a vacuum-evaporation-based approach for the roll-to-roll (R2R) production of organic thin film transistors (TFTs) and circuits. Results from 90-transistor arrays formed directly onto a plasma-polymerised diacrylate gate dielectric are compared with those formed on polystyrene-buffered diacrylate. The latter approach resulted in stable, reproducible transistors with yields in excess of 90%. The resulting TFTs had low turn-on voltage, on–off ratios ∼10⁶ and mobility ∼1 cm²/V s in the linear regime, as expected for dinaphtho[2,3-b:2′,3′-f] thieno[3,2-b]thiophene the air stable small molecule used as the active semiconductor. We show that when device design is constrained by the generally poor registration ability of R2R processes, parasitic source–drain currents can lead to a >50% increase in the mobility extracted from the resulting TFTs, the increases being especially marked in low channel width devices. Batches of 27 saturated-load inverters were fabricated with 100% yield and their behaviour successfully reproduced using TFT parameters extracted with Silvaco’s UOTFT Model. 5- and 7-stage ring oscillator (RO) outputs ranged from ∼120 Hz to >2 kHz with rail voltages, V_DD, increasing from −15 V to −90 V. From simulations an order of magnitude increase in frequency could be expected by reducing parasitic gate capacitances. During 8 h of continuous operation at V_DD = −60 V, the frequency of a 7-stage RO remained almost constant at ∼1.4 kHz albeit that the output signal amplitude decreased from ∼22 V to ∼10 V. Over the next 30 days of intermittent operation further degradation in performance occurred although an unused RO showed no deterioration over the same period.     

Rubrene thin-film transistors with crystalline channels achieved on optimally modified dielectric surface

We report on the fabrication of rubrene thin-film transistors (TFTs) with surface-modified dielectrics adopting several kinds of self-assembled-monolayer (SAM) on SiO₂/p⁺?Si substrate. With the dielectric of lower surface energy, the crystalline rubrene growth or amorphous-to-crystalline transformation kinetics is faster during in-situ vacuum post-annealing, which was performed after rubrene vacuum deposition. In the present study, hexamethyldisilazane (HMDS) was finally determined to be the most effective SAM interlayer for polycrystalline rubrene channel formation. Our rubrene TFT with HMDS-coated SiO₂ dielectric showed quite a high field mobility of ～10^?2 cm²/V s and a high on/off current ratio of ～10⁵ under 40 V.     

Dry growth of n-octylphosphonic acid monolayer for low-voltage organic thin-film transistors

Dry method for monolayer deposition of n-octylphosphonic acid (C₈PA) on the surface of aluminium oxide (AlO_x) is presented. Vacuum thermal evaporation is employed to deposit initial thickness corresponding to several C₈PA monolayers, followed by a thermal desorption of the physisorbed C₈PA molecules. AlO_x functionalized with such C₈PA monolayer exhibits leakage current density of ～10^?7 A/cm² at 3 V, electric breakdown field of ～6 MV/cm, and a root-mean-square surface roughness of 0.36 nm. The performance of low-voltage pentacene thin-film transistors that implement this dry AlO_x/C₈PA gate dielectric depends on C₈PA desorption time. When the desorption time rises from 25 to 210 min, the field-effect mobility increases from ～0.02 to ～0.04 cm²/V s, threshold voltage rises from ～?1.2 to ～?1.4 V, sub-threshold slope decreases from ～120 to ～80 mV/decade, off-current decreases from ～5 × 10^?12 to ～1 × 10^?12 A, on/off current ratio rises from ～3.8 × 10⁴ to ～2.5 × 10⁵, and the transistor hysteresis decreases from 61 to 26 mV. These results collectively support a two stage model of the desorption process where the removal of the physisorbed C₈PA molecules is followed by the annealing of the defect sites in the remaining C₈PA monolayer.     

Fabrication of single crystal field-effect transistors with phenacene-type molecules and their excellent transistor characteristics

Single crystal field-effect transistors (FETs) using [6]phenacene and [7]phenacene show p-channel FET characteristics. Field-effect mobilities, μs, as high as 5.6 × 10^?1 cm² V^?1 s^?1 in a [6]phenacene single crystal FET with an SiO₂ gate dielectric and 2.3 cm² V^?1 s^?1 in a [7]phenacene single crystal FET were recorded. In these FETs, 7,7,8,8-tetracyanoquinodimethane (TCNQ) was inserted between the Au source/drain electrodes and the single crystal to reduce hole-injection barrier heights. The μ reached 3.2 cm² V^?1 s^?1 in the [7]phenacene single crystal FET with a Ta₂O₅ gate dielectric, and a low absolute threshold voltage |V_TH| (6.3 V) was observed. Insertion of 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F₄TCNQ) in the interface produced very a high μ value (4.7–6.7 cm² V^?1 s^?1) in the [7]phenacene single crystal FET, indicating that F₄TCNQ was better for interface modification than TCNQ. A single crystal electric double-layer FET provided μ as high as 3.8 × 10^?1 cm² V^?1 s^?1 and |V_TH| as low as 2.3 V. These results indicate that [6]phenacene and [7]phenacene are promising materials for future practical FET devices, and in addition we suggest that such devices might also provide a research tool to investigate a material’s potential as a superconductor and a possible new way to produce the superconducting state.     

Low-voltage organic transistors with steep subthreshold slope fabricated on commercially available paper

Organic thin-film transistors were fabricated directly on the surface of commercially available cleanroom paper using the vacuum-deposited small-molecule semiconductor dinaphtho[2,3-b:2′,3′-f]thieno[3,2-b]thiophene (DNTT). A thin, high-capacitance gate dielectric that allows the TFTs to be operated with low voltages of 2 V was employed. The TFTs have a charge-carrier mobility of 1.6 cm²/Vs, an on/off current ratio of 10⁶, and a subthreshold slope of 90 mV/decade. In addition, the TFTs also display a very large differential output resistance, which is an important requirement for applications in analog circuits and active-matrix displays.     

Polyimide/polyvinyl alcohol bilayer gate insulator for low-voltage organic thin-film transistors

In this paper, we report the fabrication of a polyimide/polyvinyl alcohol (PVA) bilayer gate insulator for low-voltage organic thin-film transistors (TFTs). The introduction of a PVA layer to form a bilayer structure improves the dielectric and insulating properties of the gate insulator. Organic TFTs with 150 nm-thick polyimide and PVA gate insulators were inactive at low operation voltages below 5 V. Conversely, organic TFTs with 150 nm-thick polyimide/PVA bilayer gate insulators exhibited excellent device performances. Our results suggest that the introduction of a PVA layer with a high dielectric constant could be a simple and efficient way to improve the device performance of low-voltage organic TFTs.     

Effect of the work function of gate electrode on hysteresis characteristics of organic thin-film transistors with Ta2O5/polymer as gate insulator

Organic thin-film transistors (OTFTs) using high dielectric constant material tantalum pentoxide (Ta₂O₅) and benzocyclobutenone (BCBO) derivatives as double-layer insulator were fabricated. Three metals with different work function, including Al (4.3 eV), Cr (4.5 eV) and Au (5.1 eV), were employed as gate electrodes to study the correlation between work function of gate metals and hysteresis characteristics of OTFTs. The devices with low work function metal Al or Cr as gate electrode exhibited high hysteresis (about 2.5 V threshold voltage shift). However, low hysteresis (about 0.7 V threshold voltage shift) OTFTs were attained based on high work function metal Au as gate electrode. The hysteresis characteristics were studied by the repetitive gate voltage sweep of OTFTs, and capacitance–voltage (C–V) and trap loss-voltage (G_p/ω?V) measurements of metal–insulator–semiconductor (MIS) devices. It is proved that the hysteresis characteristics of OTFTs are relative to the electron injection from gate metal to Ta₂O₅ insulator. The electron barrier height between gate metal and Ta₂O₅ is enhanced by using Au as gate electrode, and then the electron injection from gate metal to Ta₂O₅ is reduced. Finally, low hysteresis OTFTs were fabricated using Au as gate electrode.     

A cross-linked poly(methyl methacrylate) gate dielectric by ion-beam irradiation for organic thin-film transistors

The electrical characteristics of pentacene organic thin-film transistors (OTFTs) using cross-linked poly(methyl methacrylate) (PMMA) as the gate dielectric are reported. Ultra-thin films of cross-linked PMMA could be obtained by spin-coating and subsequent irradiation using a 1.515 MeV ⁴He⁺ ion beam. The resulting film, with a thickness of 33 nm, possessed a low leakage current density of about 10^?6 A cm^?2 for fields up to 2 MV cm^?1. OTFTs incorporating the cross-linked dielectric operated at relatively low voltages, <10 V, and exhibited a mobility of 1.1 cm² V^?1 s^?1, a threshold voltage of ?1 V, a sub-threshold slope of 220 mV per decade and an on/off current ratio of 1.0 × 10⁶.     

The role of water in the device performance of n-type PTCDI-C8 organic field-effect transistors with solution-based gelatin dielectric

Gelatin is a natural protein, which works well as the gate dielectric for N,N-dioctyl-3,4,9,10-perylene tetracarboxylic diimide (PTCDI-C₈) organic field-effect transistors (OFETs). An aqueous solution process was applied to form the gelatin gate dielectric on poly(ethylene terephthalate) (PET) by spin-coating and subsequent casting. The field-effect mobility in the saturation regime (μ_FE,sat) and the threshold voltage (V_T) values of a typical 40 nm PTCDI-C₈ OFET are (0.22 cm² V⁻¹ s⁻¹, 55 V) in vacuum and (0.74 cm² V⁻¹ s⁻¹, 2.6 V) in air ambient. The maximum voltage shift in hysteresis is also reduced from 10 V to 2 V when the operation environment for PTCDI-C₈ OFETs is changed from vacuum to air ambient. Nevertheless, a slight reduction of electron mobility was found when the device was stressed in the air ambient. The change in the device performance has been attributed to the charged ions generation owing to water absorption in gelatin in air ambient.     

Fabrication of the flexible pentacene thin-film transistors on 304 and 430 stainless steel (SS) substrate

Flexible organic thin-film transistors (OTFT) were fabricated on 304 and 430 stainless steel (SS) substrate with aluminum oxide as a gate insulator and pentacene as an organic semiconductor. Chemical mechanical polishing (CMP) process was used to study the effect of the SS roughens on the dielectric properties of the gate insulator and OTFT characteristics. The surface roughness was decreased from 33.8 nm for 304 SS and 19.5 nm for 430 SS down to ～2.5 nm. The leakage current of the metal–insulator–metal (MIM) structure (Au/Al₂O₃/SS) was reduced with polishing. Mobility and on/off ratio of pentacene TFT with bare SS showed a wide range of values between 0.005 and 0.36 cm²/Vs and between 10³ and 10⁵ depending on the location in the substrate. Pentacene TFTs on polished SS showed an improved performance with a mobility of 0.24–0.42 cm²/Vs regardless of the location in the substrate and on/off ratio of ～10⁵. With self assembled monolayer formation of octadecyltrichlorosilane (OTS) on insulator surface, mobility and on/off ratio of pentacene TFT on polished SS was improved up to 0.85cm²/Vs and ～10⁶. I–V characteristics of pentacene TFT with OTS treated Al₂O₃/304 SS was also obtained in the bent state with a bending diameter (D) of 24, 45 or 70 mm and it was confirmed that the device performed well both in the linear regime and the saturation regime.     

Non-functionalized soluble diketopyrrolopyrrole: Simplest p-channel core for organic field-effect transistors

We report the synthesis, characterization and behavior in field-effect transistors of non-functionalized soluble diketopyrrolopyrrole (DPP) core with only a solubilizing alkyl chain (i.e. –C₁₆H₃₃ or –C₁₈H₃₇) as the simplest p-channel semiconductor. The characteristics were evaluated by UV–vis and fluorescence spectroscopy, X-ray diffraction, cyclic voltammetry (CV), thermal analysis, atomic force microscopy (AFM) and density functional theory (DFT) calculation. For top-contact field-effect transistors, two types of active layers were prepared either by a solution process (as a 1D-microwire) or thermal vacuum deposition (as a thin-film) on a cross-linked poly(4-vinylphenol) gate dielectric. All the devices showed typical p-channel behavior with dominant hole transports. The device made with 1D-microwiress of DPP-R18 showed field-effect mobility in the saturation region of 1.42 × 10^?2 cm²/V s with I_ON/I_OFF of 1.82 × 10³. These findings suggest that the non-functionalized soluble DPP core itself without any further functionalization could also be used as a p-channel semiconductor for low-cost organic electronic devices.     

Effect of gate insulator thickness on device performance of InGaZnO thin-film transistors

Top-contact thin-film transistors (TFTs) are fabricated in this work using atomic layer deposition (ALD) Al₂O₃ as the gate insulator and radio frequency sputtering InGaZnO (IGZO) as the channel layer so as to investigate the effect of Al₂O₃ thickness on the performance of IGZO-TFTs. The results show that TFT with 100-nm-thick Al₂O₃ (100 nm-Al₂O₃-TFT) exhibits the best electrical performance; specifically, field-effect mobility of 5 cm²/Vs, threshold voltage of 0.95 V, I_on/I_off ratio of 1.1×10⁷ and sub-threshold swing of 0.3 V/dec. The 100 nm-Al₂O₃-TFT also shows a substantially smaller threshold voltage shift of 1.1 V after a 10 V gate voltage is applied for 1 h, while the values for TFTs with an Al₂O₃ thickness of 220 and 280 nm are 1.84 and 2 V, respectively. The best performance of 100 nm-Al₂O₃-TFT can be attributed to the larger capacitance and the smaller amount of total trap centers possessed by a thinner insulator compared to the thicker ones.     

The effect of gate overlap lightly doped drains on low temperature poly-Si thin film transistors

Low temperature polycrystalline silicon (LTPS) thin-film transistors (TFTs) have a high carrier mobility that enables the design of small devices that offer large currents and fast switching speeds. However, the electrical characteristics of the conventional self-aligned polycrystalline silicon (poly-Si) TFTs are known to present several undesired effects, such as large leakage currents, the kink effect, and the hot-carrier effect. For this paper, LTPS TFTs were fabricated, and the SiN_x/SiO₂ gate dielectrics and the effect of the gate-overlap lightly doped drain (GOLDD) were analyzed in order to minimize these undesired effects. GOLDD lengths of 1, 1.5 and 2 μm were used, while the thickness of the gate dielectrics (SiN_x/SiO₂) was fixed at 65 nm (40 nm/25 nm). The electrical characteristics show that the kink effect is reduced in the LTPS TFTs using a more than 1.5 μm of GOLDD length. The TFTs with the GOLDD structure have more stable characteristics than the TFTs without the GOLDD structure under bias stress. The degradation from the hot-carrier effect was also decreased by increasing the GOLDD length. After applying the hot-carrier stress test, the threshold voltage variation (ΔV_TH) was decreased from 0.2 V to 0.06 V by the increase of the GOLDD length. The results indicate that the TFTs with the GOLDD structure were protected from the degradation of the device due to the decreased drain field. From these results it can be seen that the TFTs with the GOLDD structure can be applied to achieve high stability and high performance in driving circuit applications for flat-panel displays.     

Complementary-like inverters based on an ambipolar solution-processed molecular bis(naphthalene diimide)-dithienopyrrole derivative

We report on high-mobility top-gate organic field-effect transistors (OFETs) and complementary-like inverters fabricated with a solution-processed molecular bis(naphthalene diimide)-dithienopyrrole derivative as the channel semiconductor and a CYTOP/Al₂O₃ bilayer as the gate dielectric. The OFETs showed ambipolar behavior with average electron and hole mobility values of 1.2 and 0.01 cm² V^?1 s^?1, respectively. Complementary-like inverters fabricated with two ambipolar OFETs showed hysteresis-free voltage transfer characteristics with negligible variations of switching threshold voltages and yielded very high DC gain values of more than 90 V/V (up to 122 V/V) at a supply voltage of 25 V.     

Novel organic inverters with dual-gate pentacene thin-film transistor

We report on the fabrication and characterization of dual-gate pentacene organic thin-film transistors (OTFTs) with plasma-enhanced atomic-layer-deposited (PEALD) 150 nm thick Al₂O₃ as a bottom-gate dielectric and PEALD 200 nm thick Al₂O₃ as a top-gate dielectric. The V_th of dual-gate OTFT has changed systematically with the application of voltage bias to top-gate electrode. When voltage bias from −10 V to 10 V is applied to top gate, V_th changes from 1.95 V to −9.8 V. Two novel types of the zero drive load logic inverter with dual-gate structure have been proposed and fabricated using PEALD Al₂O₃ gate dielectrics. Because the variation of V_th due to chemical degradation and the spatial variation of V_th are inherent in OTFTs, the compensation technology by dual-gate structure can be essential to OTFT applications.