Actor-oriented directional anycast routing in wireless sensor and actor networks with smart antennas

Current routing protocols in wireless sensor and actor networks (WSANs) shows a lack of unification for different traffic patterns because the communication for sensor to actor and that for actor to actor are designed separately. Such a design poses a challenge for interoperability between sensors and actors. With the presence of rich-resource actor nodes, we argue that to improve network lifetime, the problem transforms from reducing overall network energy consumption to reducing energy consumption of constrained sensor nodes. To reduce energy consumption of sensor nodes, especially in challenging environments with coverage holes/obstacles, we propose that actor nodes should share forwarding tasks with sensor nodes. To enable such a feature, efficient interoperability between sensors and actors is required, and thus a unified routing protocol for both sensors and actors is needed. This paper explores capabilities of directional transmission with smart antennas and rich-resource actors to design a novel unified actor-oriented directional anycast routing protocol (ADA) which supports arbitrary traffic in WSANs. The proposed routing protocol exploits actors as main routing anchors as much as possible because they have better energy and computing power compared to constraint sensor nodes. In addition, a directional anycast routing approach is also proposed to further reduce total delay and energy consumption of overall network. Through extensive experiments, we show that ADA outperforms state-of-the-art protocols in terms of packet delivery latency, network lifetime, and packet reliability. In addition, by offer fault tolerant features, ADA also performs well in challenging environments where coverage holes and obstacles are of concerns.     

A Real-Time and Reliable Transport (RT)$^{2}$ Protocol for Wireless Sensor and Actor Networks

Wireless sensor and actor networks (WSANs) are characterized by the collective effort of heterogeneous nodes called sensors and actors. Sensor nodes collect information about the physical world, while actor nodes take action decisions and perform appropriate actions upon the environment. The collaborative operation of sensors and actors brings significant advantages over traditional sensing, including improved accuracy, larger coverage area and timely actions upon the sensed phenomena. However, to realize these potential gains, there is a need for an efficient transport layer protocol that can address the unique communication challenges introduced by the coexistence of sensors and actors. In this paper, a real-time and reliable transport (RT) protocol is presented for WSANs. The objective of the (RT) protocol is to reliably and collaboratively transport event features from the sensor field to the actor nodes with minimum energy dissipation and to timely react to sensor information with a right action. In this respect, the (RT) protocol simultaneously addresses congestion control and timely event transport reliability objectives in WSANs. To the best of our knowledge, this is the first research effort focusing on real-time and reliable transport protocol for WSANs. Performance evaluations via simulation experiments show that the (RT) protocol achieves high performance in terms of reliable event detection, communication latency and energy consumption in WSANs.     

移动自组网基于动态蜂窝的QoS路由协议

本文为移动自组网提出了一个基于动态蜂窝的QoS路由协议，它利用移动跟踪技术实现了一个分布式动态蜂窝生成协议；采用一个多Qos路由探测算法选择一条能够最大满足QoS要求的路由，并在这条路由上建立端．端主动资源预留；使用移动预测和被动资源预留技术预测源结点和目的结点可能进入的蜂窝集合，并在这些蜂窝集合与目的结点和源结点之间提前进行端．端被动资源预留；融合蜂窝动态检测技术与QoS路由修补技术自动发现和修补断裂的QoS路由．由于该路由协议模仿了固定蜂窝网络中的操作，所以，大大改善了QoS路由的性能．仿真结果表明：在满足QoS条件下，它明显提高了包传输率，减轻了路由负载．     

基于蚁群优化的无线多媒体传感器网络区分服务路由

无线多媒体传感器网络中存在多种类型的数据,而且这些数据的服务质量需求并不相同。针对这种情况,提出一种基于蚁群优化的区分服务路由协议（DSACO, differentiated service and ant colony optimization based routing protocol）。DSACO在网络分层的基础上通过限制蚂蚁的搜索范围以减少建立路由的时间和能量消耗,对不同服务质量需求的数据采用区分服务路由以满足不同类型数据的服务质量需求。仿真结果表明,新协议能够为多媒体数据的传输提供更好的QoS保障,在数据传输的平均时延、分组丢失率和能量消耗上优于已有路由协议。     

Energy Efficient QoS Aware Hierarchical KF-MAC Routing Protocol in Manet

The paper proposes an energy efficient quality of services (QoS) aware hierarchical KF-MAC routing protocol in mobile ad-hoc networks. The proposed KF-MAC (K-means cluster formation firefly cluster head selection based MAC routing) protocol reduces the concentration of QoS parameters when the node transmits data from source to destination. At first, K-means clustering technique is utilized for clustering the network into nodes. Then the clustered nodes are classified and optimized by the firefly optimization algorithm to find cluster heads for the clustered nodes. The transmission of data begins in the network nodes and TDMA based MAC routing does communication. The observation on KF-MAC protocol performs well for QoS parameters such as bandwidth, delay, bit error rate and jitter. The evaluation of proposed protocol based on a simulation study concludes that the proposed protocol provides a better result in contrast to the existing fuzzy based energy aware routing protocol and modified dynamic source routing protocol. With KF-MAC protocol, the collision free data transmission with low average energy consumption is achieved.     

GMCAR: Grid-based multipath with congestion avoidance routing protocol in wireless sensor networks

Recently, the interest in wireless sensor networks has been magnetized in the delay sensitive applications such as real-time applications. These time critical applications crave certain QoS requirements as though end-to-end delay guarantee and network bandwidth reservation. However, the severe resource constraints of the wireless sensor networks pose great challenges that hinder supporting these requirements. In this paper, we propose a Grid-based Multipath with Congestion Avoidance Routing protocol (GMCAR) as an efficient QoS routing protocol that is suited for grided sensor networks. We employ the idea of dividing the sensor network field into grids. Inside each grid, one of the sensor nodes is selected as a master node which is responsible for delivering the data generated by any node in that grid and for routing the data received from other master nodes in the neighbor grids. For each master node, multiple diagonal paths that connect the master node to the sink are stored as routing entries in the routing table of that node. The novelty of the proposed protocol lies behind the idea of incorporating the grids densities along with the hop count into the routing decisions. A congestion control mechanism is proposed in order to relieve the congested areas in case of congestion occurrence. Simulation results show that our proposed protocol has the potential to achieve up to 19.5% energy saving, 24.7% reduction in the delay and up to 8.5% enhancement in the network throughput when compared to another QoS routing protocol. However, when compared to the basic grid-based coordinated routing protocol, it achieves 23% energy saving. In addition, the proposed protocol shows its superiority in achieving better utilization to the available storage.     

QoS routing based on multi-class nodes for mobile ad hoc networks

In this paper, we present a new quality of service (QoS) routing protocol for mobile ad hoc networks (MANETs). Most of the existing routing protocols assume homogeneous nodes in MANETs, i.e., all nodes have the same communication capabilities and characteristics. However, in many ad hoc networks, nodes are not the same. Some nodes have longer transmission range, larger transmission bandwidth, and are more reliable and robust than other nodes. We take advantage of the non-homogeneous property to design more efficient QoS routing protocol. And node location information is used to aid routing. We also develop a new algorithm to calculate end-to-end bandwidth for a given path. Our QoS routing protocol contains end-to-end bandwidth calculation and bandwidth reservation. QoS route is discovered and setup only when it is needed. Extensive simulation studies demonstrate the good performance of the QoS routing protocol.     

DFR: an efficient directional flooding‐based routing protocol in underwater sensor networks

Unlike terrestrial sensor networks, underwater sensor networks (UWSNs) have salient features such as a long propagation delay, narrow bandwidth, and high packet loss over links. Hence, path setup‐based routing protocols proposed for terrestrial sensor networks are not applicable because a large latency of the path establishment is observed, and packet delivery is not reliable in UWSNs. Even though routing protocols such as VBF (vector based forwarding) and HHVBF (hop‐by‐hop VBF) were introduced for UWSNs, their performance in terms of reliability deteriorates at high packet loss. In this paper, we therefore propose a directional flooding‐based routing protocol, called DFR, in order to achieve reliable packet delivery. DFR performs a so‐called controlled flooding, where DFR changes the number of nodes which participate in forwarding a packet according to their link quality. When a forwarding node has poor link quality to its neighbor nodes geographically advancing toward the sink, DFR allows more nodes to participate in forwarding the packet. Otherwise, a few nodes are enough to forward the packet reliably. In addition, we identify two types of void problems which can occur during the controlled flooding and introduce their corresponding solutions. Our simulation study using ns‐2 simulator proves that DFR is more suitable for UWSNs, especially when links are prone to packet loss. Copyright © 2011 John Wiley & Sons, Ltd.     

事件驱动的带执行器无线传感器网络分簇算法研究

带有执行器的无线传感器网络是指在传统无线传感器网络中加入执行节点,形成传感器节点、执行节点和基站共同构成的三层监控网络。根据执行器在能量、计算能力和感知能力方面的优势,提出建立应用于事件调度的双环分簇算法。算法将执行器连接成双环结构,提升网络在线扩展能力的同时,也为无线传感器网络满足事件驱动构建基础。仿真实验证明,此算法能够有效降低网络能耗,随着节点数目的增加和监控领域的扩大,表现更加凸出。     

NHRPA: a novel hierarchical routing protocol algorithm for wireless sensor networks

Considering severe resources constraints and security threat hierarchical routing protocol algorithm. The proposed routing of wireless sensor networks （WSN）, the article proposed a novel protocol algorithm can adopt suitable routing technology for the nodes according to the distance of nodes to the base station, density of nodes distribution, and residual energy of nodes. Comparing the proposed routing protocol algorithm with simple direction diffusion routing technology, cluster-based routing mechanisms, and simple hierarchical routing protocol algorithm through comprehensive analysis and simulation in terms of the energy usage, packet latency, and security in the presence of node protocol algorithm is more efficient for wireless sensor networks. compromise attacks, the results show that the proposed routing     

A novel real-time scheme for (m,k)-firm streams in wireless sensor networks

The multimedia transmission based real-time applications have posed a big challenge to wireless sensor networks (WSNs) where both reliability and timeliness need to be guaranteed at the same time, to support an acceptable Quality of Service (QoS). The existing real-time routing protocols, however, are not able to meet the QoS requirements of realtime applications because of the inherent resource constraint of sensor nodes and instability of wireless communication. Therefore, we propose a real-time scheme in this paper, including a QoS-aware routing protocol and a set of fault recovery mechanisms, for (m,k)-firm based real-time applications over WSNs. A local status indicator which is specially devised for (m,k)-firm stream, is used for intermediate nodes to monitor and evaluate their local conditions. The proposed routing protocol takes into account of packet deadline, node condition and remaining energy of next hop, to make optimal forwarding decision. Additionally, according to the stream QoS and node condition, the proposed fault recovery mechanisms are utilized for nodes to handle the congestion, link failure and void problems occurred during transmission and remain the desired reliability and timeliness requirements. The proposed scheme has been well studied and verified through simulations. The results have proved the efficiency of the proposed scheme in terms of high successful transmission ratio, small end-to-end delay and long lifetime of network.     

Network Partitioning Recovery Mechanisms in WSANs: a Survey

Wireless sensor and actor networks (WSANs) are more promising and most addressing research field in the area of wireless sensor networks in recent scenario. It composed of possibly a large number of tiny, autonomous sensor devices and resources rich actor nodes equipped with wireless communication and computation capabilities. Actors collect sensors’ information and respond collaboratively to achieve an application specific mission. Since actors have to coordinate their operation, a strongly connected inter-actor network would be required at all the time in the network. Actor nodes may fail for many reasons (i.e. due of battery exhaustion or hardware failure due to hash environment etc.) and failures may convert connected network into disjoint networks. This can hinder sometimes not only the performance of network but also degrade the usefulness and effectiveness of the network. Thus, having a partitioning detection and connectivity restoration procedure at the time of failure occurs in the network is crucial for WSANs. In this paper, we review the present network partitioning recovery approaches and provide an overall view of this study by summarizing previous achievements.     

An energy efficient and QoS aware routing protocol for wireless sensor and actuator networks

Wireless sensor and actuator networks are composed of sensor and actuator nodes interconnected via wireless links. The actuators are responsible for taking prompt decisions and react accordingly to the data gathered by sensor nodes. In order to ensure efficient actions in such networks, we propose a new routing protocol that provides QoS in terms of delay and energy consumption. The network is organized in clusters supervised by CHs (Cluster-Heads), elected according to important metrics, namely the energy capability, the riches of connectivity, which is used to select the CH with high node density, and the accessibility degree regarding all the actuators. The latter metric is the distance in number of hops of sensor nodes relative to the actuator nodes. This metric enhances more the network reliability by reducing the communication delay when alerting the actuator nodes, and hence, reducing the energy consumption. To reach efficiently the actuator nodes, we design a delay and energy sensitive routing protocol based on-demand routing approach. Our protocol incurs less delay and is energy efficient. We perform an evaluation of our approach through simulations. The obtained results show out performance of our approach while providing effective gain in terms of communication delay and energy consumption.     

Moralism: mobility prediction with link stability based multicast routing protocol in MANETs

In recent research, link stability is getting tremendous attention in mobile adhoc networks (MANETs), because of several impediments that occur in a reliable and robust network. Link stability metric is used to improve network performance in terms of end-to-end delay, data success delivery ratio (DSDR) and available route time (ART). Energy consumption, bandwidth and communication delay of major concern in ad hoc networks. A high mobility of MANET nodes reduces the reliability of network communication. In a dynamic networks, high mobility of the nodes makes it very difficult to predict the dynamic routing topology and hence cause route/link failures. Multicast in MANETs is an emerging trend that effectively improves the performance while lowering the energy consumption and bandwidth usage. Multicast routing protocol transmits a packet to multicast a group at a given time instant to achieve a better utilization of resources. In this paper, node mobility is considered to map better their movement in the network. So, the links with long active duration time can be identified as a stable link for route construction. Variation in signal strength is used to identify whether the direction of the node is towards or away from estimating node. We consider signal strength as QoS metric to calculate link stability for route construction. Efforts are made to identify the link with highly probable longer lifetime as the best suitable link between two consecutive nodes. We predict the movement time of nodes that define the route path to the node destination. Exata/cyber simulator is used for network simulation. The simulation results of the proposed routing protocol are compared with on-demand multicast routing protocol and E-ODMRP, which works on minimum hop count path. Analysis of our simulation results has shown improvement of various routing performance metrics such as DSDR, ART, routing overhead and packet drop ratio.     

认知无线电网络诱骗攻击问题及安全解决方案

针对认知无线电网络可用频谱动态变化的特点,提出一种特有的诱骗攻击问题,即在分布式认知无线电网络中,当认知节点采用按需路由协议建立路由链接时,恶意节点向路由请求数据包中加入虚假频谱信息,诱使其他节点建立路由链接,随后丢弃需其转发的数据包.为了解决这个问题,将认知无线电网络分成单跳有簇头结构,通过簇头检测恶意节点.为便于检验方案的可行性,结合簇头检测结果设计了一种路由协议.理论分析和仿真实验表明该安全问题会显著降低网络通信性能,本文提出的解决方案是有效和可行的.     

Adaptive Pull�CPush Based Event Tracking in Wireless Sensor Actor Networks

Wireless sensor networks have attracted significant interest for various scientific, military, and e-health applications. Recently a new class of sensor networks ??sensor/actor networks?? has been introducing new research challenges due to the unique coordination requirements among sensors and actors. In sensor/actor networks, actors are the nodes that have the capability to move in the field, equipped with powerful devices and can respond to the events of interest. With this capability, autonomous operation of the network is possible without a centralized controlling mechanism. This, however, requires the network to apply cooperative mechanism to decide when and how monitoring is done to track the event and how the event will be responded. In this regard, little work has been done in terms of co-existing Push and Pull data flows in the network. In this paper, we propose an Adaptive Pull?CPush (APP) based Event Tracking approach that allows sensor-to-actor communication as well as actors coordination in response to the events occurred. APP proposes two models of sensors organization: region-based organization (RAPP) and neighbor-based organization (NAPP) to alert nodes in the vicinity of reported event. APP exploits the mobility of actor nodes to form dynamic responsibility clusters, thus ensuring an event specific response to emergencies. Routing in APP is based on Routing by Adaptive Targeting (RAT), which is a delay-constrained geographical routing protocol. Simulation results reveal significant performance improvement in terms of response time and energy conservation.     

Wireless sensor and actor networks: research challenges

Wireless sensor and actor networks (WSANs) refer to a group of sensors and actors linked by wireless medium to perform distributed sensing and acting tasks. The realization of wireless sensor and actor networks (WSANs) needs to satisfy the requirements introduced by the coexistence of sensors and actors. In WSANs, sensors gather information about the physical world, while actors take decisions and then perform appropriate actions upon the environment, which allows a user to effectively sense and act from a distance. In order to provide effective sensing and acting, coordination mechanisms are required among sensors and actors. Moreover, to perform right and timely actions, sensor data must be valid at the time of acting. This paper explores sensor-actor and actor-actor coordination and describes research challenges for coordination and communication problems.     

Effectiveness of Reliable Routing Protocols in Mobile Ad Hoc Networks

Due to unpredictable topology change and frequent link failure, it becomes evident major challenge to provide the stable route between source and destination in mobile ad hoc networks. Unlike previous multipath routing schemes for redundancy and unicast routing protocol utilizing the longest route expiration time measured by geographical information supported by Global Positioning System (GPS), we develop a framework to establish the most stable route based on measured frequency of link failure, available battery as well as the number of actual connections. To evaluate performance of proposed scheme, we provide practical simulation results for multipath and unicast routing protocol in terms of packet delivery ratio, control overhead, average hop length as well as end-to-end delay. Through analysis of simulation results, we demonstrate that our scheme shows better performance than general unicast routing protocol as well as similar packet delivery ratio to multipath routing protocol with less maintenance overhead. Ki-Il Kim received the M.S. and Ph.D. degrees in computer science from the Chungnam National University, Daejeon, Korea, in 2002 and 2005, respectively. He is currently with Department of Information Science, Gyeongsang National University as a faculty member. His research interests include routing for MANET, QoS in wireless network, multicast, and sensor networks. Sang-Ha Kim received the B.S. degree in chemistry from Seoul National University, Seoul, Korea, in 1980. He received the M.S. and Ph.D. degrees in quantum scattering and computer science from the University of Houston, Houston, TX, in 1984 and 1989, respectively. From 1990 to 1991, he was with the Supercomputing Center, SERI, Korean Institute of Science and Technology (KIST) as Senior Researcher. He joined Chungnam National University, Daejeon, Korea, in 1992, where he is a Professor. His current research interests include wireless networks, ad hoc networks, QoS, optical networks, and network analysis.     

Energy‐efficient void avoidance geographic routing protocol for underwater sensor networks

Underwater wireless sensor networks (UWSNs) consist of a group of sensors that send the information to the sonobuoys at the surface level. Void area, however, is one of the challenges faced by UWSNs. When a sensor falls in a void area of communication, it causes problems such as high latency, power consumption, or packet loss. In this paper, an energy‐efficient void avoidance geographic routing protocol (EVAGR) has been proposed to handle the void area with low amount of energy consumption. In this protocol, a suitable set of forwarding nodes is selected using a weight function, and the data packets are forwarded to the nodes inside the set. The weight function includes the consumed energy and the depth of the candidate neighboring nodes, and candidate neighboring node selection is based on the packet advancement of the neighboring nodes toward the sonobuoys. Extensive simulation experiments were performed to evaluate the efficiency of the proposed protocol. Simulation results revealed that the proposed protocol can effectively achieve better performance in terms of energy consumption, packet drop, and routing overhead compared with the similar routing protocol.