Preparation of polymer latex particles carrying salt-responsive fluorescent graft chains

We prepared the novel fluorescent polymer latex particles which can change their fluorescence intensity in response to the increasing NaCl concentration in water. Core polymer latex particles were synthesized by emulsifier-free emulsion polymerization of styrene and 2-(2-chloroisobutyroyloxy)ethyl methacrylate. Hydrophilic polymer chains containing epoxy groups were grafted from the core particles by surface-initiated atom transfer radical copolymerization of methoxy polyethyleneglycol methacrylate (MEO_xMA, x = 4 or 9) and glycidyl methacrylate in aqueous media. After azidation of epoxy groups in graft chains, a water-soluble fluorescent dansyl derivative was successfully coupled with the graft chains by copper-catalyzed azide-alkyne cycloaddition in aqueous media. The wavelength of maximum fluorescence intensity of polymer particles carrying graft chains with longer PEG side chains (x = 9) was slightly blue-shifted (7 nm) and the fluorescence intensity increased (1.35 times) with an increase in NaCl concentration as opposed to polymer particles with shorter PEG chains (x = 4).     

One-step preparation of electrorheological suspension containing poly(lithium acrylate) via inverse emulsion polymerization and study of its electrorheological effect

Electrorheological (ER) fluid or suspension containing lithium salt of poly(acrylic acid) were synthesized directly by inverse emulsion polymerization. Effects of the amounts of crosslinking agent and the stabilizer and neutralization degree used in the polymerization, as well as water content of the polymer particles on the ER activity were investigated. The ER suspension exhibited maximum yield stress at optimum amounts of stabilizer and crosslinking agent used in the inverse emulsion polymerization, as well as at optimum water content of the polymer particles. Glycerol was tried to be used as an activator instead of water and was shown to have a favorable effect on the thermal stability of the ER suspension. Core–shell-type polymer particles were synthesized through inverse emulsion polymerization with supplemental addition of a second monomer. The ER suspension containing particles with poly(lithium acrylate) as core and polyacrylamide as shell showed better ER behavior than those without the polyacrylamide shell. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 2169–2174, 1998     

Preparation of Ni-g-polymer core–shell nanoparticles by surface-initiated atom transfer radical polymerization

Surface-initiated atom transfer radical polymerization (si-ATRP) technique was successfully employed to modify Ni nanoparticles with polymer shells. ATRP initiators were covalently bonded onto Ni nanoparticle surfaces by a combination of ligand exchange and condensation reactions. Various kinds of polymers including poly(methyl methacrylate) (PMMA) and poly(n-isopropylacrylamide) (PNIPAM) were grafted from the immobilized initiators. The grated polymer shells gave Ni nanoparticles exceptionally good dispersion and stability in solvents. Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA) and transmission electron spectroscopy (TEM) were employed to confirm the grafting and to characterize the nanoparticle core–shell structure. Gel permeation chromatography (GPC) studies of cleaved polymer chains revealed that the grafting polymerization was well controlled. The magnetic properties of Ni-g-polymer nanoparticles were also studied.     

Surface imprinted core‐shell nanorod with ultrathin water‐compatible polymer brushes for specific recognition and adsorption of sulfamethazine in water medium

A surface imprinted core‐shell nanorod with water‐compatible property was first prepared, using a two‐step “living” polymerization technique, with magnetic attapulgite (MATP) as core, and it was applicable in the enhanced selective removal of sulfamethazine residue from pure water environments. MATP was synthesized by an impregnation and pyrolysis method, and polymerable group was subsequently attached onto the surface. The imprinted polymer nanoshell (13 nm) with the “living” fragments was formed via a reverse atom transfer radical precipitation polymerization, avoiding the tedious graft of initiator and providing the easy‐accessible imprinted sites. Ultrathin hydrophilic polymer brushes (2.0 nm) were surface‐grafted to improve their water‐compatibility. The nanoadsorbent exhibited good thermal stability, magnetism, and hydrophilicity through characterization. The nanoadsorbent showed large adsorption capacity toward sulfamethazine from water, which increased with the increase of contact temperature. Langmuir isotherm fitted the equilibrium data better, and the kinetic data (within 45 min) were well‐analyzed by the pseudo‐second‐order kinetic model. Also, the specific adsorption property of the nanoadsorbent was greatly improved through the surface‐grafting, which exhibited excellent selectivity to sulfamethazine compared with other reference antibiotics. Efficient magnetic separation and good reuse of the nanoadsorbent provided the potential possibility for selective recognition and fast removal of antibiotic pollutions from water environments. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40854.     

Surface grafting of poly(pentafluorostyrene) on the iron and iron oxide particles via reversible addition fragmentation chain transfer (RAFT) polymerization

A surface grafting technique is reported for synthesis of poly(pentafluorostyrene) via reversible addition fragmentation chain transfer onto iron (iron oxide) particles. 4‐Methoxydithiobenzoate is used for the RAFT chain transfer agent. The molecular weight, surface morphology, thickness, thermal properties, and monomer conversion of the grafted polymer are reported. The grafted poly(pentafluorostyrene)–iron particles show a higher thermal transition temperature compared to the nongrafted polymer because it is speculated that the covalent bond between the polymer backbone and the surface of the iron particles restricts the molecular mobility. The monomer conversion increases in proportion to the amount of chain transfer agent (CTA) concentration at early polymerization time. The grafted poly(pentafluorostyrene) shows a “hairy” like polymer architecture with fibril thickness in the range of 80 to 100 nm. A thin coating is expected to maintain the magnetic saturation properties of iron particles. To the best of our knowledge, this is the first time that poly(pentafluorostyrene) has been grafted onto the iron particles utilizing RAFT and 4‐methoxydithiobenzoate as a CTA. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44898.     

Synthesis and magnetorheological characteristics of ribbon‐like,polypyrrole‐coated carbonyl iron suspensions under oscillatory shear

One of the crucial problems of classical magnetorheological (MR) fluids is their high rate of sedimentation. This disadvantage may be substantially eliminated using core‐shell particles. The aim of this study is to prepare spherical carbonyl iron (CI) particles coated with conducing polymer polypyrrole (PPy) with ribbon‐like morphology. Scanning electron microscopy proved the formation of the ribbon‐like layer onto CI particles while Fourier transform infrared spectroscopy confirmed the chemical structure of PPy. The magnetic properties observed via vibrating sample magnetometer showed decreased magnetization saturation of core‐shell‐structured particles due to the existence of non‐magnetic surface layer. MR measurements performed under oscillatory shear flow as a function of the applied magnetic flux density, temperature, and particle concentration showed that core‐shell particle‐based MR suspension exhibits sufficient MR performance for practical applications. Moreover, the suspension stability is promoted significantly when core‐shell particles are used as a dispersed phase. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

‘Nano-tree’—type spherical polymer brush particles as templates for metallic nanoparticles

We present a new type of spherical polymer brush particles that consist of a solid poly(styrene) core (diameter: ca. 100 nm) onto which chains of a bottlebrush polymer have been densely grafted. These systems were prepared in aqueous dispersion by photo emulsion-polymerization using the macromonomer poly(ethylene glycol) methacrylate (PEGMA). In opposite to conventional spherical polyelectrolyte brushes carrying linear polymer chains, the system prepared here has a shell consisting of regularly branched chains (‘nano-tree’-type morphology). The branches consist of oligo(ethylene glycol) chains (n=13) terminated by a hydroxyl group. We demonstrate that these particles can be used as nanoreactors for the generation and immobilization of well-defined silver nanoparticles. Cryo-TEM and FESEM images show that Ag nanoparticles with diameter of ∼7.5±2 nm are homogeneously embedded into the PS-PEGMA brushes. Moreover, the composite particles exhibit an excellent colloidal stability. The catalytic activity is investigated by monitoring the reduction of 4-nitrophenol by NaBH₄ in presence of these silver nano-composite particles. The rate constant k_app was found to be strictly proportional to the total surface of the nanoparticles in the system. The study of the temperature dependence shows that the rate constants k_app obtained at different temperatures leads to an activation energy of 62 kJ/mol.     

Poly(trimethylene terephthalate)/silica nanocomposites prepared by dual in situ polymerization: synthesis,morphology, crystallization behavior and mechanical properties

The sol–gel technique has provided promising opportunities for the preparation of polymer/inorganic hybrid materials at the molecular level, which ensures the inorganic particles are well dispersed in the organic matrix. In this work, poly(trimethylene terephthalate) (PTT)/silica nanocomposites were fabricated via the sol–gel technique and in situ polymerization. Fourier transform infrared and nuclear magnetic resonance analyses confirmed that some PTT molecular chains were grafted to the surface of silica. Unlike pure PTT, the grafted PTT was insoluble in a mixed solvent of chloroform and hexafluoro‐2‐propanol. Both transmission electron microscopy and scanning electron microscopy showed that the silica particles, with a size of 40–50 nm, were homogeneously dispersed in the PTT matrix with no preferential accumulation in any region. Differential scanning calorimetry revealed that the glass transition temperature and cold‐crystallization peak of the composites gradually increased with increasing silica loading. A simultaneous increase of stiffness and toughness was observed for the nanocomposites. Moreover, polarized optical microscopy showed that the nanocomposites exhibited interesting banded spherulites, which were different from banded spherulites of PTT previously reported. The nanocomposites with covalent bonding between silica and PTT gave a series of interesting results, such as elevated glass transition temperature, simultaneous increase of stiffness and toughness as well as surprising banded spherulites. Copyright © 2009 Society of Chemical Industry     

RAFT synthesis of cellulose‐g‐polymethylmethacrylate copolymer in an ionic liquid

We demonstrate for the first time the feasibility in conducting the graft copolymerization of methylmethacrylate (MMA) with cellulose by the means of the reversible addition‐fragmentation chain transfer (RAFT) polymerization in an ionic liquid [1‐N‐butyl‐3‐methylimidazolium chloride] (BMIMCl). Cellulose was first converted to a macromolecular chain transfer agent to which MMA was grafted by RAFT in BMIMCl. The success of the occurrence of different reactions was validated by elemental analyses, Fourier transform infrared and nuclear magnetic resonance spectroscopies. The results demonstrate that the MMA polymer chains were grafted onto the cellulose while the use of the ionic liquid as a reaction medium enhanced the polymerization rate to a moderate extent. Gel permeation chromatography analysis of poly(MMA) chains cleaved from the cellulose by acidic hydrolysis indicated low polydispersity indices (ca. 1.3) that were consistent with the “living” nature of the RAFT. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fabrication and characterization of silver core and porous silica shell nanocomposite particles

The nanocomposite particles of silver core and silica shell have been successfully prepared. Silver colloids are synthesized using polymer polyvinylpyrrolidone (PVP) as protecting agent and the silica shell is then coated by means of the Stöber process to fabricate Ag@SiO₂ core shell particles. The shell thickness can be easily controlled by the amount of tetraethyl orthosilicate (TEOS). TEM results indicate that the silica shell uniformly encapsulates the silver core particles. During the silica growth, PVP molecules will be trapped and dispersed in the silica shell. As a result, porous silica shell structure is obtained after burning off the PVP molecules and a positive correlation exists between the specific surface area of core shell particles and PVP quantity in the original silver colloids. The silica shell, even at a thickness of 25 nm, can maintain the original shape of Ag@SiO₂ particles up to 1000 °C, and prohibit silver from sintering effects.     

Chemical Functionalization of Graphene Oxide by Poly(styrene sulfonate) Using Atom Transfer Radical and Free Radical Polymerization: A Comparative Study

Poly(sodium styrenesulfonate)-functionalized graphene was prepared from graphene oxide, using atom transfer radical polymerization and free radical polymerization. In atom transfer radical polymerization route, the amine-functionalized GO was synthesized through hydroxyl group reaction of GO with 3-amino propyltriethoxysilane. Atom transfer radical polymerization initiator was grafted onto modified GO (GO-NH₂) by reaction of 2-bromo-2-methylpropionyl bromide with amine groups, then styrene sulfonate monomers were polymerized on the surface of GO sheets by in situ atom transfer radical polymerization. In free radical polymerization route, the poly(sodium 4-styrenesulfonate) chains were grafted on GO sheets in presence of Azobis-Isobutyronitrile as an initiator and styrene sulfonate monomer in water medium. The resulting modified GO was characterized using range of techniques. Thermal gravimetric analysis, scanning electron microscopy, transmission electron microscopy, and atomic force microscopy results indicated the successful graft of polymer chains on GO sheets. Thermogravimetric analysis showed that the amount of grafted polymer was 22.5 and 31?wt% in the free radical polymerization and atom transfer radical polymerization methods, respectively. The thickness of polymer grafted on GO sheets was 2.1?nm (free radical polymerization method) and 6?nm (atom transfer radical polymerization method) that was measured by atomic force microscopy analysis. X-ray diffractometer and transmission electron microscopy indicated that after grafting of poly(sodium 4-styrenesulfonate), the modified GO sheets still retained isolated and exfoliated, and also the dispersibility was enhanced.     

原位聚合法制备纳米TiO2/有机硅改性丙烯酸酯复合乳液

用硅烷偶联剂对纳米二氧化钛(TiO2)粒子表面进行预处理，使其表面由亲水性变为疏水性，并在其表面接枝上可反应的有机官能团。通过改性纳米TiO2表面上的原位聚合反应，制备了纳米TiO2／硅丙复合乳液。透射电子显微镜观察结果显示，乳液中存在两种结构的乳胶粒子：一种是以聚丙烯酸酯为核、有机硅聚合物为壳的核壳结构硅丙乳胶粒子；另一种是以纳米TiO2为核、有机聚合物为壳的纳米TiO2／聚合物复合结构乳胶粒子。乳胶粒子的结构形态可由乳化剂的用量控制。该复合乳液具有较好的杀菌效果，在较短时间内对细菌的杀灭率可达90％以上。     

Untreated Silica Nanoparticles Containing Poly(acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid) Composite—Effect of Copolymer Composition

Poly(acrylamide-co-2-acrylamido-2-methyl-1-propanesulfonic acid)/Silica [Poly(AM-co-AMPSA)/SiO₂] core-shell composite nanogels with silica as core and hydrophilic polymer with functional groups such as sulfonic acid, amido, as shell were prepared by microemulsion polymerization without surface treatment of silica and upto 5.5 mole% of AMPSA in feed to control the particle size as well as morphology. The synthesized intercalated composites were produced with controllable sizes ranging from 44–77 nm in diameter. The repared sulfonic acid based silica core-shell composite nanogels were characterized by dynamic light scattering, transmission electron microscope, Fourier transform infrared spectrophotometer, thermogravimetric analyzer, differential scanning calorimeter, scanning electron microscope and X-ray diffraction. The encapsulation of functional polymer shell onto the silica particles was driven by the hydrogen-bonding interaction between sulfonic acid and amido groups of AMPSA with Si-O linkages. The onset degradation temperature is increased from 227°C to 262°C in copolymer-silica composites which indicates improved thermal stability. The shifting of glass transition temperature from 194°C to 203°C in copolymeric composite nanogels further confirms the existence of strong interactions of silica filler with copolymer chains. Also the chemical composition of polymeric chains and the affinity of polymer chains and silica influenced the morphology.     

Effects of three crosslinkers on colored pH‐responsive core–shell latexes

Environmentally responsive hydrogels have become attractive research subjects for many applications. In this work, a series of pH‐sensitive and color‐changing nanoparticles (nanogels) with core–shell structures were synthesized. The cores were blue latex particles synthesized by a miniemulsion technique with styrene and methacrylic acid as monomers and Neozapon Blue 807 as a dye. The shell was a pH‐sensitive polymer that was precipitation‐polymerized onto the core from 2‐(diethylamino) ethyl methacrylate with N,N′‐methylenebisacrylamide, poly(propylene glycol) diacrylate, and divinylbenzene as crosslinking agents. In the resultant latexes, the color was observed to change from deep blue to pale blue as the pH of the system was changed from a high of 10 to a low of 3. The synthesized latexes and particles (gels) were then characterized with an ultraviolet–visible spectrometer, dynamic light scattering, Fourier transform infrared, and nuclear magnetic resonance. Atomic force microscopy was also used to investigate the different morphologies of the particles after the synthesized latexes were dried at different pH values. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of poly(acrylate-styrene)/poly(acrylate-styrene) core/shell latex and TOPEM-DSC characterization

Poly(acrylate-styrene)/poly(acrylate-styrene) core/shell latex particles were synthesized via seeded semi-continuous emulsion polymerization. Both core polymer (CP) and shell polymer (SP) were copolymerized by using three identical monomers of methyl methacrylate (MMA), butyl acrylate (BA) and styrene (St) with different composition ratios. The synthesized core/shell latex particle presents a phase separated state with the interfacial layer between CP and SP. In this study, the weight fractions and the corresponding thickness of this interfacial layer, CP and SP phase in the core/shell latex particle has be successfully calculated by using multi-frequency temperature-modulated differential scanning calorimetry (TOPEM-DSC). The results indicate that the interfacial layer thickness of the core/shell latex particle is determined by the core/shell structure, such as hard core/soft shell (defined as HC/SS) and soft core/hard shell (defined as SC/HS), the glass transition temperature (T_g) of the “hard” phase (correspondingly core or shell for HC/SS or SC/HS structure, respectively), and the existence of hydrophilic monomer during the copolymerization process such as acrylic acid. Meanwhile, the influence of film-formation-temperature on the microstructure of the latex films was systematically explored in this work.     

Elastomer polymer brushes on flat surface by bimolecular surface-initiated nitroxide mediated polymerization

The method of formation of well-defined polymer brushes based on the nitroxide mediated polymerization (NMP) of n-butyl acrylate (BA) initiated from a self-assembled mono-layers (SAMs) of an azoic initiator in the presence of a stable nitroxide radical is described. After preliminary qualitative characterization by X-ray photoelectron spectroscopy, the samples were studied by ellipsometry in order to determine the dry film thickness (initiator and polymer) and the grafting density of macromolecular chains. It is demonstrated, that in the presence of stable counter radical SG1, acting as chain growth moderator, the surface initiated NMP exhibits a living/controlled character permitting to control architectural parameters (e.g. degree of polymerization) of elastomer grafted polymer chains. The possibility to use the living control character of this type of polymerization to re-initiate grafted chains in order to increase the thickness of an elastomer thin film with conservation of the brushes regime has been demonstrated.     

Fabrication of oriented electrospun cellulose nanocrystals–polystyrene composite fibers on a rotating drum

Nitrobenzene (CNC-1), trifluoromethyl benzene (CNC-2) modified and polystyrene-grafted (CNC-g) cellulose nanocrystals in polystyrene (PS)-N,N dimethylformamide (DMF) solutions were electrospun and collected as stretched and aligned fibers on a rotating drum. Scanning electron microscope pictures showed significant alignment in the case of unmodified and nitrobenzene-modified CNC-1/PS nanocomposite fibers once the linear speed of rotor reached to 15 m s⁻¹. Fiber diameter decrease was more strong with rotor speed increase in the case of trifluoromethyl benzene modified (CNC-2) and polystyrene-grafted (CNC-g) cellulose nanocrystals/PS systems. Dynamic mechanical analysis including storage and elastic modulus of electrospun-oriented fibers were performed on surface-modified and polymer-grafted CNC/PS samples. According to α transition peak, the increase in the glass-transition temperature with filler concentration was the highest in polymer-grafted CNC-g/PS composite fibers. It was due to the interpenetration of grafted polymer brushes and free polymer chains in continuous phase and resulted in restrictions of motions of polymer chains in the PS matrix. The elastic moduli of nitrobenzene (CNC-1) and trifluoromethyl benzene (CNC-2)-modified CNC-filled PS composite fibers agreed well with percolation model, which indicates the CNC–CNC interactions and network formation with an increase in concentration. Magnitude of the elastic modulus of polymer grafted CNC-g at 0.33 vol % in PS was significantly higher than the prediction from percolation theory. It was due the immobilized polymer chains around CNC-g particles. However, grafted polymer chains, at higher CNC concentrations acted like stickers among CNC particles and caused CNC agglomerates with entrapped free polystyrene from the matrix, thus caused a decrease in the elastic modulus. © 2020 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48942.     

Effect of hydroquinone on location of methacrylic acid-grafted chains introduced into polyethylene film by photografting

Effect of hydroquinone (HQ) on photografting of methacrylic acid (MAA) on low-density polyethylene film (thickness = 30 μm) sensitized with xanthone was investigated at 60°C in water medium. Both the formation of grafted polymer and homopolymer were retarded by HQ. The contact angle of water on the MAA-grafted polyethylene films (sample with HQ) prepared in the system with HQ was larger than that of the grafted films (sample without HQ) prepared in the system without HQ. Based on electron probe microanalysis of the grafted films, it was found that distribution of grafted chains in the direction of film thickness is different between the both grafted films. Namely, the grafted chains of the sample with HQ distributed in the inside of the film compared with those of the sample without HQ. The difference in the distribution of grafted chains between the grafting systems with and without HQ was discussed in terms of effect of HQ on the photodecomposition of MAA-grafted chains and the subsequent initiation of polymerization by radicals due to the photodecomposition.     

Millimeter‐size polyethylene hollow spheres synthesized with MgCl2‐supported Ziegler‐Natta catalyst

Polyethylene hollow spheres with diameters of 0.4–2 mm were synthesized by a two‐step slurry polymerization in a single reactor with a spherical MgCl₂‐supported Ziegler‐Natta catalyst activated by triethylaluminum, in which the first step was prepolymerization with 0.1 MPa propylene and the second step was ethylene polymerization under 0.6 MPa. The prepolymerization step was found necessary for the formation of hollow spherical particles with regular shape (perfectly spherical shape). The effects of adding small amount of propylene (propylene/ethylene < 0.1 mol/mol) in the reactor after the prepolymerization step were investigated. Average size of the polymer particles was increased, and the polymerization rate was markedly enhanced by the added propylene. Development of the particle morphology with polymerization time was also studied. The polymer particles formed by less than 20 min of ethylene polymerization showed hollow spherical morphology with thin shell layer. Most of the particles had ratio of shell thickness/particle radius smaller than 0.5. By prolonging the ethylene polymerization, the shell thickness/particle radius ratio gradually approached 1, and the central void tended to disappear. Central void in polymer particles formed from smaller catalyst particles disappeared after shorter time of polymerization than those formed from bigger catalyst particles. The shell layer of the hollow particles contained large number of macro‐, meso‐ and micro‐pores. The mesopore size distributions of four typical samples were analyzed by nitrogen adsorption–desorption experiments. A simplified multigrain model was proposed to explain the morphogenesis of the hollow spherical particles. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43207.     

Optically active thermosensitive amphiphilic polymer brushes based on helical polyacetylene: preparation through “click” onto grafting method and self-assembly

Optically active, thermosensitive, and amphiphilic polymer brushes, which consist of helical poly(N-propargylamide) main chains and thermosensitive poly(N-isopropylacrylamide) (PNIPAm) side chains, were prepared via a novel methodology combining catalytic polymerization, atom transfer radical polymerization (ATRP), and click chemistry. Helical poly(N-propargylamide) bearing α-bromoisobutyryl pendent groups was synthesized via catalytic polymerization, followed by substituting the –Br moieties with azido groups. Then, alkynyl terminated PNIPAm formed via ATRP was successfully grafted onto the azido functionalized helical polymer backbones via click chemistry, providing the expected polymer brushes. GPC, FT-IR, and ¹H-NMR measurements indicated the successful synthesis of the novel amphiphilic polymer brushes. UV–vis and CD spectra evidently demonstrated the helical structures of the polymer backbones and the considerable optical activity of the final brushes. The polymer brushes self-assembled in aqueous solution forming core/shell structured nanoparticles, which were comprised of optically active cores (helical polyacetylenes) and thermosensitive shells (PNIPAm).