共查询到20条相似文献,搜索用时 171 毫秒
1.
现代办公室通常有多个隔断单元的实际情况,针对传统空调系统无法很好维持良好的室内空气品质和很大的能源消耗,介绍了采用多点射流送风系统,单独控制每个隔断单元的技术。实验研究表明这种送风方式能有效地改善热舒适性和降低能耗。 相似文献
2.
3.
4.
为了研究办公场所纤维风管系统送风时的气溶胶分布情况,采用Fluent软件,针对风机盘管送风系统和纤维风管送风系统在不同的运行工况下,对办公场所室内速度场和气溶胶浓度分布情况进行数值模拟,并进行实验验证。通过分析速度场和气溶胶浓度场的分布特点,比较得出纤维风管送风系统下气溶胶分布效果优于风机盘管送风系统,且送风速度的增加能有效降低气溶胶质量浓度。采用纤维风管送风系统时,在一定范围内增加送风量可降低室内气溶胶质量浓度,进而可改善室内空气品质。结果表明,相比于风机盘管送风系统,将纤维风管送风系统应用在办公场所具有“独特”的优势。 相似文献
5.
6.
7.
归纳近年来低温送风系统研究中的关键问题。指出低温送风系统研究中送风温度、送风末端选择、热舒适性评价及其经济性评价研究的主要进展,总结低温送风系统送风温度、送风末端选择的现状和问题,并分析送风温度及末端送风方式的选择对低温送风系统的经济性的影响,总结低温送风系统热舒适性方面的主要研究方法和研究成果。在此基础上,对低温送风系统的研究前景进行展望。 相似文献
8.
9.
本文对冲天炉冷冻除湿送风装置进行了详细的分析,提出了一个节能型冷冻除湿送风系统,该系统在保证满足除湿精度要求的前提下,具有较显著的节能效果和经济效益。 相似文献
10.
11.
简介地铁车站三种环控模式,以某地铁车站为例,对屏蔽门系统的负荷组成及车站区间排热风机穴UPE/OTE风机雪与区间隧道机械风机穴TVF风机雪的能耗进行定量分析,并对屏蔽门系统和闭式、开式系统进行负荷与能耗的比较,分析表明屏蔽门系统具有较高的节能性和舒适性。 相似文献
12.
纺织行业是重点耗能行业。南京纺织在“十五”期间经济发展较快,但能源消耗增长率却低于经济增长率,节能降耗取得了一定成效。文章分析了纺织系统在“十五”期间经济规模、能源消耗、节能工作,对纺织在“十一五”期间如何进一步开展节能降耗、资源综合利用工作提出了对策。 相似文献
13.
14.
Earth does not consume energy. Neither do we nor does our energy system. Rather, we consume exergy. So using an exergy optic should be preferred when we plan future hydrogen-electricity systems. In this article, we provide a perspective on the exergy optic from the viewpoint of Earth's major energy-transaction constituencies. We first consider the Earth as a whole and then consider the following constituencies: the biosphere, people and civilization's energy system. Our objectives are to understand better the nature and sources of thermodynamic losses and to provide a background against which future hydrogen opportunities may be evaluated. As a codicil, we hope our results can improve our understanding of how people, civilizations and nature operate, and are connected. In a companion article, representative components within the energy system hierarchy (e.g., Niagara Falls, home heating systems and fuel cells) are considered. 相似文献
15.
针对大空间建筑模型进行喷淋效果实验,通过实验得到以下结论:由于Low-E玻璃材料在夏季具有较强的温室效应,未喷淋时,屋顶内表面平均温度为56.8℃,与环境平均温差为21.9℃,增加了空调的能耗。彩钢板屋顶具有较好的保温性能,未喷淋时,屋顶内表面平均温度为40.6℃,模型内部空间平均温度为38.9℃,该温度远低于Low-E玻璃模型温度,能耗比Low-E玻璃模型小。喷淋时,Low-E内层温度比外层温度低约5.4℃;彩钢板内外层温度在喷淋时两者相差不大,仅为0.5℃,喷淋对Low-E玻璃屋顶空调节能意义明显。 相似文献
16.
17.
《Energy》1998,23(10):867-878
The non-isentropic compression processes in the compressor of a vapor-compression system consume more power with increasing thermal lift because of the increasing slope of the constant isentropic line on a log(p)-h diagram. However, in a two-stage system (TSS), compression is performed in stages, thereby allowing the compressors to operate efficiently close to the saturation curve. In this paper, thermodynamic models of the TSS are developed to simulate system performance with respect to the interstage temperature and heat-exchanger parameters. The TSS performance is better than for a simple cycle and depends on the interstage temperature of the flash intercooler. Models are used to derive the optimum total heat exchanger area between the evaporator and condenser. 相似文献
18.
19.
20.
优化方法在石化生产系统的节能应用 总被引:1,自引:0,他引:1
过程系统优化是系统工程与最优化方法相结合,解决能量系统的优化用能问题,是把能量系统整体作为优化对象,以降低能源消耗,提高经济效益为目标,实现系统总体的用能最优。综述了过程系统优化技术的主要方法,指出石油化工厂节能潜力,回顾能量系统优化技术的国内外应用现状。 相似文献