共查询到18条相似文献,搜索用时 125 毫秒
1.
2.
3.
4.
5.
介绍了一种应用于阴调行波管的脉冲调制器的工作原理和设计方法。采用低压电源和高变比脉冲变压器升压的刚管调制器可以降低高压绝缘设计的难度,并且发射机也能够在宽脉冲和高占空比的条件下工作。 相似文献
6.
介绍了一种新型载频解调式栅极脉冲调制器.调制器由2只脉冲变压器、载频调制控制电路、解调与脉冲输出电路组成.调制器采用了内载频脉冲驱动模式,利用了MOSFET的极分布电容对信号的延时作用,通过二极管解调还原调制管触发脉冲,最终输出正负电压的调制脉冲.载频信号频率大于200 kHz,隔离变压器具有尺寸小,绕组匝数少的特点.采用这种模式的调制器,输出脉冲宽度宽、前后沿小、工作比高.详细介绍了基于载频解调式脉冲调制器的应用实例,并对其性能参数进行了测试. 相似文献
7.
8.
互感型全固态浮动板调制器是一种栅极调制器。文中介绍了互感型全固态浮动板调制器的工作原理、特点和设计方法。互感型全固态浮动板调制器采用互感器传输触发脉冲,波形采用双极性脉冲的形式,解决了高压隔离、抗干扰、小型化设计等关键问题。通过实验验证,电路设计合理,可广泛应用于栅控行波管雷达发射机。 相似文献
9.
介绍一种用于机载合成孔径雷达(SAR)行波管发射机的聚焦极调制器设计,叙述其工作原理、开关管选择、隔离脉冲变压器的特点,最后给出调制器测试结果和波形。 相似文献
10.
高功率转换开关是限制大功率高压脉冲调制器重复运行频率的关键因素。为避免高功率转换开关的使用,开展了基于感应叠加原理的高压充电电源初步研究。建立了构成感应叠加充电电源基本单元的脉冲变压器调制电路的数学模型,确立了变压器磁芯截面的设计原则,以IGBT作为调制器的转换开关,开展了2级感应叠加充电电源的初步实验研究。实验表明与单元脉冲变压器输出电压相比,升压系数接近2,波形没有发生畸变。 相似文献
11.
任意形状激光束需要有一个相应的形状任意可调的电脉冲.在各种任意脉冲产生技术中,FET行波结构可以达到较好的结果.采用20节GaAs FET行波结构,300 ps的触发脉冲经过多个250 ps的延迟,通过计算机控制每个FET状态,实现了输出宽度大于5 ns且脉冲的形状任意可调的脉冲信号.输出脉冲经过滤波和放大,输出幅度达到10 V. 相似文献
12.
Shunkang Liu 《Journal of Infrared, Millimeter and Terahertz Waves》1999,20(2):317-324
A ridge waveguide transformer is commonly used in output structure for millimeter wave tubes(such as magnetron and traveling wave tube). It is not satisfied, if a traditional designing method is used in broadband case. The optimum design of a ridge waveguide transformer is given in this paper. The computation results show that the reflect character of the transformer can be met the demands for broad band match. 相似文献
13.
Shunkang Liu 《Journal of Infrared, Millimeter and Terahertz Waves》2000,21(9):1489-1493
A significant advantage of the folded wave traveling wave tube (TWT) is simple coupling structure. In millimeter wave band, owing to higher frequency, linear double taper can be used as impedance transformer. The design method and calculation results for the folded waveguide TWTs in Kα-band are given. 相似文献
14.
研究了行波管高压电源中变压器的铁芯损耗、绕组损耗(铜损)和工作频率,主要通过理论推导和仿真对磁性元件的设计进行了优化分析,并用PC95材质PQ40/40磁芯设计了一种输出电压10kV、输出功率450 W的行波管高压电源变压器。变压器设计结果满足电源要求,实验结果验证了理论分析。 相似文献
15.
I. V. Azrakov S. V. Zavarin E. L. Nikishin 《Journal of Communications Technology and Electronics》2016,61(5):541-545
An equation for calculation of the diffraction efficiency of an acousto-optic Bragg cell with multielement traveling wave transformer taking into account the exponential distribution of the acoustic field along of the transformer is obtained. The results of theoretical and experimental studies of the dependence of the diffraction efficiency of the Bragg cell on the number of radiating elements in the piezoelectric traveling wave transformer are given. Nonlinear behavior of the dependence of the diffraction efficiency on the number of radiators in the considered transformer is analyzed. 相似文献
16.
应用于行波管的新一代高压电源设计 总被引:1,自引:0,他引:1
介绍了一种应用于行波管的高压开关电源电路,采用降压电流馈入型全桥变换电路,可有效降低高压变压器漏感对效率的影响。试验结果证明该电路能达到高可靠、高效率的要求。 相似文献
17.
S波段5kW环圈行波管 总被引:1,自引:0,他引:1
本文介绍环圈结构的特性和整管的设计。所研制的S波段环圈行波管在2.3-2.7GHz频率范围内脉冲功率大于5.5kW,饱和增益大于39dB,电子效率大于20%。该管的性能参数和尺寸满足了技术指标的要求。 相似文献
18.
E. M. Il’ina I. P. Medvedkov 《Journal of Communications Technology and Electronics》2017,62(6):598-604
Equations of the multifrequency nonlinear theory of the traveling wave tube are derived using the fundamental frequency method. Basic results of the numerical calculation of the output parameters of a traveling wave tube operating in the multifrequency mode are presented. The level of sideband components in traveling wave tubes with uniform and nonuniform slow-wave structures and the way of suppression of sideband components are investigated. 相似文献