Effect of pozzolanic reaction products on alkali-silica reaction

1 IntroductionThe use of fly ashto control the expansion dueto al-kali-silica reaction (ASR) is well established and a num-ber of reviews have been published recently[1-4]. Howflyash brings about this reductionin expansionis not yet un-derstood although a number of theories have been put for-ward to explain its action. For controlling mechanism,they put more emphasis onthe adsorption andresort of al-kali by supplementary cementing material (SCM) , formore acidity oxide in SCM,and the secon…     

Optimization of efficient stable reagent of alkaline thiourea solution for gold leaching

1　INTRODUCTIONThiourea ,asanontoxic goldleachingreagentsubstitutingcyanide ,hasattractedtheinterestofmanyresearchersallovertheworldsincethedissolu tionofgoldinthioureasolutionwasfirstreportedin194 1,andaseriesofstudiesonthetheoryandtech nologyforleachinggoldbythioureahavebeencon ducted[1 3] .Mostreportson golddissolutioninthioureasolutionwereconcernedwithacidicmedia .Itwasdifficultforgoldtodissolveinalkalinesolutionbecauseofthepassivationofelementsulfurproducedbytheirreversibledecompositi…     

The petrochemistry and geochemistry of rich-alkali granite porphyry in Western Yunnan

The characteristics of the chemical composition of the rich-alkali granite porphyries are poor in SiO₂, with mean content of 69.19%, but rich in alkali and high in potash. The mean content of (K₂O+Na₂O) is 9.85%. K₂O is much greater than Na₂O, mean value of K₂O/Na₂O is 2.10. As shown by the REE analysis, REE contents is lower. Compared with the granite of south China, the rich-alkali granite porphyry hase higher LREE, and no anomaly of europium (δEu=0.87). Its genetic type belongs to A type graritoid. Project supported by the Key Program of 8th Five-Year Plan of China Synopsis of the first author Hu Xiangzhao, associated professor. born in Dec. 1949. majoring in Petrology and Geochemistry.     

Alkali Aggregate Reaction in Alkali Slag Cement Mortars

1　ＩｎｔｒｏｄｕｃｔｉｏｎＡｌｋａｌｉａｇｇｒｅｇａｔｅｒｅａｃｔｉｏｎ (ＡＡＲ)ａｆｆｅｃｔｓｄｒａｍａｔｉｃａｌｌｙｔｈｅｓａｆｅｔｙａｎｄｓｅｒｖｉｃｅｌｉｆｅｏｆｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓ .Ｉｎｔｅｒｍｓｏｆｏｒｄｉｎａｒｙｃｏｎｃｒｅｔｅ ,ｔｈｅｄａｎｇｅｒｏｕｓＡＡＲｉｓｕｓｕａｌｌｙｋｅｐｔａｗａｙｔｈｒｏｕｇｈｌｉｍｉｔｉｎｇｔｏａｎｕｍｂｅｒｏｆａｌｋａｌｉｓ .ＷｈｅｎＰｏｒｔ ｌａｎｄｃｅｍｅｎｔｉｓｕｓｅｄ ,ｔｈｅａｌｋａｌｉｃｏｎｔｅｎｔ (ｏｎａｃｃｏｕｎｔｏｆ…     

Combustion synthesis and luminescent properties of CaO: Eu<Superscript>3+</Superscript>, M<Superscript>+</Superscript> (M=Li,Na, K) phosphor

Li⁺, Na⁺, or K⁺ co-doped CaO: Eu³⁺ phosphors were prepared by the combustion synthesis method and characterized by X-ray diffraction (XRD), photoluminescence and photoluminescence excitation (PL-PLE) spectra. The experimental results show that, upon excitation with 250 nm xenon light, the emission spectrum of the CaO: Eu³⁺ consists of 4f-4f emission transitions from the ⁵ D ₀ excited level to the ⁷ F _J (J=1, 2, 3) levels with the mainly electric dipole transition ⁵ D ₀→⁷ F ₂ of Eu³⁺, indicating that the Eu³⁺ occupies a low symmetry. The charge-transfer band (CTB) shows somewhat red shift with the decreasing ionic radii of co-doped alkali metal ions. The PL and PLE intensities are significantly enhanced, especially the strongest intensity of luminescent is CaO: Eu³⁺, Li⁺ phosphor, when alkali metal ions are incorporated. The strongest peak of emission is slightly shifted from 614 to 593 nm, indicating that the Eu³⁺ ion locates in a symmetric position (O _h ) when alkali metal ions are incorporated.     

Preparation and thermoelectric properties of SiO<Subscript>2</Subscript>/<Emphasis Type="Italic">β</Emphasis>-Zn<Subscript>4</Subscript>Sb<Subscript>3</Subscript> nanocomposite materials

A series of SiO₂/β-Zn₄Sb₃ core-shell composite particles with 3, 6, 9, and 12 nm of SiO₂ shell in thickness were prepared by coating β-Zn₄Sb₃ microparticles with SiO₂ nanoparticles formed by hydrolyzing the tetraethoxysilane in alcohol-alkali-water solution. SiO₂/β-Zn₄Sb₃ nanocomposite thermoelectric materials were fabricated with these core-shell composite particles by spark plasma sintering (SPS) method. Microstructure, phase composition, and thermoelectric properties of SiO₂/β-Zn₄Sb₃ nanocomposite thermoelectric materials were systemically investigated. The results show that β-Zn₄Sb₃ microparticles are uniformly coated by SiO₂ nanoparticles, and no any phase transformation reaction takes place during SPS process. The electrical and thermal conductivity gradually decreases, and the Seebeck coefficient increases compared to that of β-Zn₄Sb₃ bulk material, but the increment of Seebeck coefficient in high temperature range remarkably increases. The thermal conductivity of SiO₂/β-Zn₄Sb₃ nanocomposite material with 12 nm of SiO₂ shell is the lowest and only 0.56 W·m⁻¹·K⁻¹ at 460 K. As a result, the ZT value of the SiO₂/β-Zn₄Sb₃ nanocomposite material reaches 0.87 at 700 K and increases by 30%.     

Thermodynamics of chromite ore oxidative roasting process

To explicate the thermodynamics of the chromite ore lime-free roasting process,the thermodynamics of reactions involved in this process was calculated and the phrases of sinter with different roasting times were studied.The thermodynamics calculation shows that all the standard Gibbs free energy changes of the reactions to form Na2CrO4,Na2O·Fe2O3,Na2O·Al2O3 and Na2O·SiO2 via chromite ore and Na2CO3 are negative,and the standard Gibbs free energy changes of the reactions between MgO,Fe2O3 and SiO2 released f...     

Formation and dielectric properties of Mn-Doped BSTN composite ceramics

The influence of Mn doping on the formation and dielectric properties of 0.7BaO·0.3SrO·(1−y)TiO₂·yNb₂O₅ (BSTN) composite ceramics were investigated. The Mn was doped according to the formula 0.7BaO·0.3SrO·(0.7−z)TiO₂·0.3Nb₂O₅·zMnO₂ (BSTNM). The results show the two phases, perovskite phase BST and the tungsten bronze phase SBN, are coexistence in BSTNM as they are in BSTN composite ceramics. The Mn ions doped in BSTN substitute for Nb⁵⁺ ions in the tungsten bronze phase, and then, the Nb⁵⁺ ions substitute for Ti⁴⁺ ions in the perovskite phase. With the increasing of Mn dopant, the content of the perovskite phase increases while that of the tungsten bronze phase decreases, and the grain size of the perovskite phase decreases. As well as, the phase transition temperature of tungsten bronze phase increases with value z increasing from 0 to about 0.05.     

Preparation of λ-MnO2 by Column Method and Its Ion-Sieve Property

λ-MnO₂ was prepared by column method from normal spinel LiMn₂O₄ with purity of 99.38%. The influence of LiMn₂O₄ grain size and acidity of leaching solution on the lithium leaching process was studied. The results show that the appropriate range of LiMn₂O₄ grain size was 60–160 meshes and the concentration of leaching solution HCl was 0.1 mol·L⁻¹. The adsorption capacity Q of λ-MnO₂ for lithium increased with the increase of pH and changed markedly at pH 6.0–10.0. It was 3.80mmol/g at pH 12.0 The distribution coefficients K_d of Li⁺ and Na⁺ were 3.406×10⁴ and 2.300 respectively, and the separation coefficient a _Na ^Li was 1.481 ×10⁴ at pH 6.5. As a result, λ-MnO₂ is a high performance ion-sieve material for lithium ion. LEI Jia-heng: Born in 1957. Funded by the National Natural Science Foundation of China (No. 59972027) and the Natural Science Foundation of Hubei Province (No. 2002AB074)).     

Microstructures and Electrical Properties of Bi_(0.5)-(Na_(1-x-y)K_xLi_y)_(0.5)TiO_3 Lead-free Piezoelectric Ceramics

The microstructures and electrical properties of Bi0.5(Na1-x-yKxLiy)0.5TiO3 lead-free piezoelectric ceramics were studied.These ceramics were prepared by conventional ceramic technique.XRD analysis reveals that the ceramics possess almost pure perovskite phase when y≤0.2.The SEM results show that,with more amounts of Li+,the crystalline grain growing speed is accelerated,and the sintering temperature can effectively be decreased.The measurements of piezoelectric properties indicate that the ceramics with relatively low amount of Li+ and high amount of K+ have comparatively large piezoelectricity.The dielectric measurements show that the ceramics have properties like relaxor ferroelectrics and diffuse phase transition(DPT) at Td and Tc,respectively.The results of ferroelectric measurements reveal the system has relatively higher remanent polarization Pr(27.6 μC/cm2) and lower coercive field Ec(37.5 kV/cm).     

Electrochemical behaviors of gold and its associated elements in various complex agent solutions

1　INTRODUCTIONGoldisquitestableanddifficulttodissolveinacommonmineralacid .However ,becausethereisadelectroniclayerunfilledingoldatomicstructure ,goldcanbecombinedwithmanychemicalagentstoformstablecomplexions,causingthepotentialofgoldinasolutiontodecreaseandgoldtodissolveinthesolutioneasily .Basedonthisprinciple ,cyanideisanefficientlixiviatingagentofgold ,andhasbeenwidelyusedtoextractgoldfrom primaryandsecondaryresources .However ,itisthemosttoxicandnotbeneficialtoen vironmentprotection…     

水热辅助溶胶凝胶法制备纳米钛酸锌及其光催化性能

采用水热辅助的溶胶凝胶法制备纳米钛酸锌（ZnTiO₃）光催化剂,以罗丹明B为目标降解物,运用动力学模型分析罗丹明B（RhB）初始浓度对降解效果的影响。通过SEM、XRD、XPS、UV-Vis DRS对ZnTiO₃进行表征,并使用自由基捕获试验分析其降解机理。结果表明,ZnTiO₃为纯六方相,形貌为类球形,粒径50 nm左右。在催化剂用量为1 g/L、RhB初始浓度为5 mg/L、pH值为3的条件下,光催化反应150 min后,RhB降解率为93.2%。其动力学方程为k=0.132C₀^-1.253。ZnTiO₃光催化剂降解过程中,·OH、h⁺、·O₂^-均起到催化作用,产生·OH、h⁺的量相近且多于·O₂^-,说明·OH、h⁺在催化反应中起主要作用。     

A New Kind of Eco-Cement Made of Cement Kiln Dust and Granular Blast Furnace Slag

1 IntroductionThe kiln dust is the solid waste collected fromce-ment kilns .Its chemical composition is similar to that ofcement raw meal , but the potassuim,sodium, chlorineand sulfur content and the lime saturation coefficient aremuch higherthanthose of the cement rawmeal[1].Ontheother hand,the binding water of it is relatively lowandthere are some clinker minerals . Generally,cement kilndust can be classifiedintotwo categories .One isthe dustfromdry process rotary kilns (without preheater …     

Structural characteristics and photocatalytic activity of ambient pressure dried SiO<Subscript>2</Subscript>/TiO<Subscript>2</Subscript> aerogel composites by one-step solvent exchange/surface modification

An ambient pressure synthesis of SiO₂/TiO₂ binary aerogel was prepared through the low-cost precursors of titanium tetrachloride (TiCl₄) and sodium silicate (Na₂O·nSiO₂). After gelation, solvent exchange and surface modification were performed simultaneously and the modified gel was finally dried under ambient pressure. Microstructural analyses by transmission electron microscope (TEM) indicate that fabricated SiO₂/TiO₂ aerogel composite shows similar sponge-like nanostructure as silica aerogel, and the Brunauer–Emmett–Teller (BET) analysis shows that the specific surface area of the composite reaches 605 m²/g, and the average pore size is 9.7 nm. Such binary aerogel exhibits significant photocatalytic performance in this paper for treating model pollutant of methyl orange (MO), and the decolorizing efficiency of MO is detected as 84.9% after 210 mins exposure to UV light irradiation. Degraded gel suspends in the water so as to separate from solution for reuse, and after 4 times recycling, 70% degradation efficiency can be easily reached when composite catalyzed system is exposed for 210 mins under UV irradiation.     

Fabrication and microstructure of SiO2−GeO2 sol-gel glass coatings

SiO₂−GeO₂ sols and gel glass coatings with different contents of germanium dioxide were fabricated. Stable and transparent sols could only be obtained when the content of GeO₂ was under 35%. It is shown by SEM that only one continuous phase is observed in the coating of 65SiO₂·35GeO₂ and plenty of Ge, O and Si were all found in it. However, the separated phase is found in the coating of 60SiO₂·40GeO₂ and a large number of Ge and O. It is proved by the Raman scattering investigation that the separated phase in the coating of 60SiO₂ ·40GeO₂ is germanium dioxide. The congeries of hydrolystates of Cl₃ GeCH₂ CH₂ COOH play the main role in the formation of the separated phase when the proportion of GeO₂ is much higher. Si−O−Ge, Si−O−Si, and Ge−O−Ge bonds form in the coating of 65SiO₂·35GeO₂ and this coating is homogenous. Jing Cheng-bin: Born in 1974 This work was partly financially supported by the Foundation of Key Teachers of Ministry of Education, China     

IR Spectra Analysis of SiO2-TiO2-GeO2 Gel Glass of CO2 Laser Transmitting Hollow Waveguide

Both titanium and germanium were introduced into silicon dioxide system by sol-gel method to move its region of anomalous dispersion caused by IR resonance absorption towards the wavelength of CO₂ laser. It is indicated by IR absorption spectra that as the content of SiO₂ decreases in this glass system TiO₂ and GeO₂ tends to exist in their own phases. As for the gel glass with a composition of 40 SiO₂·30TiO₂·30GeO₂, when the temperature is below 600°C, germanium atoms exist mainly in Ge−O−Ge bonds. With the temperature increasing from 800°C to 1000°C, titanium atoms in Si−O−Ti bonds abmost transform into Ti−O−Ti bonds. Furthermore, a large number of Si−O−Ti and Si−O−Ge bonds formed when the temperature approaches 800°C, which makes a notable IR absorption band round the wavelength of CO₂ laser. Therefore, sol-gel based SiO₂−TiO₂−GeO₂ gel glass is a candidate material for CO₂ laser hollow waveguide. JING Cheng-bin: Born in 1974. This work was partly financially supported by the Foundation of Key Teachers of Ministry of Education, China.     

Adsorption of Pb^2＋ on macroporous weak acid adsorbent resin from aqueous solutions： Batch and column studies

The adsorption properties of a novel macroporous weak acid resin (D152) for Pb²⁺ were investigated with chemical methods. The optimal adsorption condition of D152 resin for Pb²⁺ is at pH 6.00 in HAc-NaAc medium. The statically saturated adsorption capacity is 527 mg/g at 298 K. Pb²⁺ adsorbed on D152 resin can be eluted with 0.05 mol/L HCl quantitatively. The adsorption rate constants determined under various temperatures are k _{288 K}=2.22×10⁻⁵ s^t-1, k _{298 K}=2.51×10⁻⁵ s⁻¹, and k _{308 K}= 2.95×10⁻⁵ s⁻¹, respectively. The apparent activation energy, E _a is 10.5 kJ/mol, and the adsorption parameters of thermodynamics are ΔH ^Θ=13.3 kJ/mol, ΔS ^Θ=119 J/(mol·K), and ΔG ^Θ 298 K =−22.2 kJ/mol, respectively. The adsorption behavior of D152 resin for Pb²⁺ follows Langmuir model. Foundation item: Project(2008F70059) supported by the Scientific and Technological Research Planning of Zhejiang Province, China     

Effects of Chemical Treatments on Thermal Expansion Properties of Cordierite Ceramics

Cordierite honeycomb ceramics was treated with 1.5 M HNO3 , followed with 1.5 M NaOH at 93 ℃. The combination of acid treatment with alkali treatment significantly diminished the rebounding of coefficient of thermal expansion （CTE） caused by heat treatment, a phenomenon observed in samples treated solely with acid. Inductively coupled plasma （ICP） analysis results reveal that the alkali treatment preferentially dissolved ＂free＂ SiO2 left in the acid-treated samples, which is considered to be a key factor responsible for the CTE rebounding.     

NMR research on cement clinker and its structures in early age hydration

Clinker has long been regarded as a critical factor for cement hydration and solidification.α-C2S and β-C2S in 2CaO·SiO2(C2S) phase and C3S Monoclinic 1(C3S M1) and C3S Monoclinic 3 (C3S M3) in 3CaO·SiO2 (C3S) phase were clearly recorded in the 29Si MAS NMR spectra.The content of C3S phase in the clinker deduced from the fine peak analysis coincides with the phase quantification analysis calculated by the Taylor-Bogue method based on XRF,which also accords to the statistical data in industrial production.NM...     

Preparation and microstructure characterization of poly-sialate-disiloxo type of geopolymeric cement

In order to investigate the influence of three key molar ratios (n(SiO₂)/n(Al₂O₃), n(K₂O)/n(Al₂O₃) and n(H₂O)/n(K₂O)), a total of nine potassium poly-sialate-disiloxo (K-PSDS) geopolymeric cement matrices were designed according to orthogonal design principle. Subsequently, XRD, ESEM-EDXA and MAS-NMR techniques were employed to further characterize the microstructure of the most fully reacted geopolymeric cement matrix. The experimental results show that n(K₂O)/n(Al₂O₃) has the most significant effect on compressive strength amongst the three ratios. The highest compressive strength (20.1 MPa) can be achieved when n(SiO₂)/n(Al₂O₃)=6.5, n(K₂O)/n(Al₂O₃)=0.8 and n(H₂O)/n(K₂O)=10.0. The FTIR spectra of nine PSDS geopolymeric cement matrices also indicate that geopolymeric cement matrix with the highest strength is the most fully reacted one and possesses the largest amount of geopolymeric cement products. The microscopic analysis reveals that PSDS geopolymeric cement matrix possesses structural characteristics similar to gel substances in having a wide range of Si endowments, but predominantly the framework molecular chains of Si partially replaced by 4-coordinated Al tetrahedral.