Protein concentrate of African oil palm (Elaesis guineensis, Jacquin), extraction process and functional properties

A study was carried out for the purpose of obtaining and characterizing a protein concentrate obtained from defatted oil palm cake using alkaline extraction, and compare it with a commercial soy meal. The oil palm cake came from a national industry as a subproduct of the oil extraction of the palm kernels. The moisture, protein, fat, crude fiber and ash content of the oil palm was then determined. The optimum conditions for extraction and precipitation of the proteins were selected. These were the following: extraction at pH, 11.4; adding NaOH 0.06 M solvent; a meal/solvent relation of 1:20 g/ml and extraction time, 20 minutes with magnetic agitation, and precipitation at pH 5.3. The protein concentrate obtained contained: 66.50% protein; 0.07% fat, 0.90% crude fiber, and 3.20% ashes. Then the following functional properties were analyzed: solubility, according to the pH; water absorption (250); oil absorption (175); emulsion activity (27.2), and stability (13.6). The author concludes that the protein concentrate has good water and oil absorption when compared to soymeal; the emulsion, however, was found to be unstable to heat.     

Functional properties of protein extracted from flaked,defatted, whole corn by ethanol/alkali during sequential extraction processing

Functional properties (solubility, foaming capacity and stability, emulsifying capacity, emulsion stability, heat coagulability, heat gelation and film formation) of protein extracted by 45% ethanol/55% 0.1 M NaOH from flaked, defatted, undergermed corn during the Sequential Extraction Process (SEP) were evaluated and compared with those of a laboratory-prepared soy protein concentrate. SEP is a new approach to corn fractionation that recycles the ethanol produced from the fermentation of cornstarch to unstream steps of protein extraction and the simultaneous extraction of corn oil and dehydration of the ethanol. Freeze-dried corn protein extracts contained at least 80% crude protein (dry basis), which is indicative of protein concentrates. SEP protein concentrates had solubilities in water of greater than 80% at pH values of 7 or above and were significantly more soluble than the soy protein concentrate at pH above 3. SEP corn proteins also showed better heat stabilities and greater emulsifying capacities and emulsion stabilities. Dilute dispersions (0.1%) of corn protein produced substantial but less stable foams. Corn proteins produced films similar to zein and soy protein films but were unable to form heat-induced gels. These results indicate that SEP produces a protein concentrate with functional properties suitable for food and industrial uses. Paper presented at the session on New Processes: Extractions and Purifications II, 83rd Annual Meeting of the AOCS, Toronto, May 10–14, 1992.     

Partially hydrolyzed rapeseed protein isolates with improved functional properties

Limited rapeseed protein hydrolysates ranging from 3.1 to 7.7% hydrolysis were produced from isoelectric-precipitated protein isolate. Water absorption, oil absorption, whippability, foam capacity and stability, emulsifying activity, and emulsion stability of the hydrolysates were determined. All protein hydrolysates showed better functional properties than the original protein isolate. Foam and emulsion stability decreased as the degree of hydrolysis increased. The hydrolysate with the lowest degree of hydrolysis showed the best functional properties. These improved functional properties make rapeseed protein hydrolysates a useful product to be used in foods such as breads, cakes, ice creams, meat products, desserts, and salad dressings.     

Functional properties and protein concentrate of Pigeon pea (Cajanus cajan (I.) Millsp) flour

The objective of this investigation was to study the functional properties of Pigeon pea (Cajanus cajan (L.) Millsp) flour and protein concentrate. The solubility of both samples were superior than 70% at pH above 6.7 and below 3.5. The water and oil absorption were 1.2 and 1.07 ml/g of sample and 0.87 and 1.73 ml/g of flour and protein concentrate samples, respectively. The minimum concentration of flour and protein concentrate needed for gelation was 20% and 12%, respectively. The emulsifying capacity of flour and concentrate was 129.35 g and 191.66 g oil/g of protein and the emulsion stability 87.50 and 97.97%, respectively, after 780 minutes. The foam capacity and stability of flour foam were 36.0% and 18.61, while of the concentrate were 44.70% and 78.97% after 90 minutes. These properties indicate that the flour as well as the concentrate could have application in various food systems.     

Enzymatic hydrolysis of extruded-expelled soy flour and resulting functional properties

Limited hydrolysis (4% degree of hydrolysis) of extruded-expelled soy flour protein (protein dispersibility index=21) that was poor in solubility and other functional properties was evaluated at pilot-plant scale (5 kg of flour) with two endopeptidases and one exopeptidase. Some hydrolysates were merely spray-dried whereas others were jet-cooked at 104°C for 19 s before spray-drying. Solubility, emulsification capacity and stability, foaming capacity and stability, apparent viscosity, and sensory attributes were then characterized. The type of protease used and hydrothermal cooking affected functional and sensory properties. Protein solubility modestly increased with hydrolysis and jet cooking, but emulsification capacity decreased on hydrolysis and was not restored with hydrothermal cooking. Emulsion stability improved in the endopeptidase hydrolysates, but not in the exopeptidase hydrolysates. The foaming capacities of the hydrolysates for both types of enzymes were better than for the unhydrolyzed control. Highly stable foams were obtained after hydrolyzing with exopeptidase and hydrothermal cooking. Ten percent protein hydrolysate dispersions showed large losses in consistency coefficient apparent viscosity, which increased significantly with hydrothermal cooking only for the unhydrolyzed control. Difference-from-control sensory evaluation indicated that both jet-cooked and non-jet-cooked enzyme hydrolysates were different from unhydrolyzed controls.     

Effect of dehulling methods and desolventizing temperatures on proximate composition and some functional properties of sesame (Sesamum indicum L.) seed flour

Sesame seeds were dehulled mechanically and in 10% sodium chloride solution before oil extraction and drying to obtain the flour. The effect of these dehulling methods on the proximate composition, oil and water absorption, emulsification, and foaming properties of the flour was investigated. The effect of desolventizing temperatures (80, 90, and 100°C) on these properties was also investigated. Protein contents of seeds, dehulled mechanically (MDSF) and in 10% NaCl solution (SDSF), were 58.5 and 52.1%, respectively. Carbohydrate and ash contents of both flours also varied. The oil and water absorption capacities of the flours were 268 and 252% for MDSF and 370 and 410% for SDSF, respectively. The emulsion capacity of the MDSF sample was slightly lower (20.0 mL oil/g sample) but more stable than the SDSF sample, whose value was 20.4 mL oil/g sample. The foam capacity of MDSF was, however, higher (48.5%) but less stable than SDSF (33.7%). An increase in desolventizing temperatures of the meal led to increases in oil and water absorption capacities of the flours. Foam and emulsion capacities, on the other hand, decreased with increase in temperature. Desolventizing temperatures had no effect on the stability of the formed emulsion but had a decreasing effect on the stability of the foam.     

Flaking and extrusion as mechanical treatments for enzyme-assisted aqueous extraction of oil from soybeans

Flaking and extruding dehulled soybeans were evaluated as a means of enhancing oil extraction efficiency during enzyme-assisted aqueous processing of soybeans. Cellulase, protease, and their combination were evaluated for effectiveness in achieving high oil extraction recovery from extruded flakes. Aqueous extraction of extruded full-fat soy flakes gave 68% recovery of the total available oil without using enzymes. A 0.5% wt/wt protease treatment after flaking and extruding dehulled soybeans increased oil extraction recovery to 88% of the total available oil. Flaking and extruding enhanced protease hydrolysis of proteins freeing more oil. Treating extruded flakes with cellulase, however, did not enhance oil extraction either alone or in combination with protease. Discrepancies in oil extraction recoveries were encountered when merely considering crude free fat because some oil became bound to denatured protein during extrusion and/or sample drying. Bound fat was unavailable for determination by using the hexane extraction method, but was accounted for by using the acid hydrolysis method for total oil determination. Oil extraction recovery from extruded soybean flakes was affected by oil determination methods, which was not the case for unextruded full-fat soy flour.     

Soy flour in European-type bread

Effect of soy flour, soy protein concentrate, and isolate on dough and loaf properties of breads produced from flour, yeast, salt, and water with no shortening or added improvers was investigated. Wheat flour, rye flour, and mixtures of the two were included in the studies. Three wheat flours, varying in baking quality and extraction, ash content 0.65 and 0.80%, were used; 1.5, 3, and 5% soy products, flour basis, were added. Water absorption increased 3.8–4.7% at the 3% soy level and 6.1–7.3% at the 5% level of soy product addition. Dough development time and stability were increased and dough softening reduced. Dough gassing power increased ca. 7–25%. By using a shorter proofing time, more intensive mixing, and the sponge dough process, loaves only slightly smaller in volume than the control were obtained at the 3% soy level. Panel evaluations scored bread highest with 1.5 or 3% soy flour and that with 3 or 5% soy protein concentrate as lowest, but acceptable. Use of 2% lard as shortening, or 2% lard plus emulsifier, produced soy breads of excellent quality and ca. 25% higher loaf volume than controls.     

Functional properties of soybean and lupin protein concentrates produced by ultrafiltration-diafiltration

Ultrafiltration followed by diafiltration (UF-DF) was evaluated for the production of protein products from partially defatted soybean meal or undefatted lupin (Lupinus albus L.2043N) meal. This study determined the effects of UF-DF on functional properties of the extracted proteins and compared the results with those of protein prepared by acid-precipitation (AP). UF-DF produced only protein concentrates (73% crude protein, dry basis, db), while AP produced protein isolates (about 90% crude protein, db). Soybean protein produced by UF-DF showed markedly higher values for solubilities up to pH 7.0, surface hydrophobicity index, emulsion activity index, and foaming capacity than did the AP soybean protein. UF-DF soy protein was also the most heat-stable among all protein samples tested. With lupin proteins, only the surface hydrophobicity and emulsion activity indices were significantly improved by using UF-DF. UF-DF generally had no adverse effects on, and in most cases even improved, the functional properties of soy protein concentrate produced by this method. UF-DF did not produce a comparable improvement in functional properties of lupin proteins as it did for soybean protein.     

Healthier lipid combination oil‐in‐water emulsions prepared with various protein systems: an approach for development of functional meat products

Five protein‐stabilized oil‐in‐water emulsions were prepared using sodium caseinate (O/SC), soy protein isolate (O/SPI), sodium caseinate and microbial transglutaminase (O/SC + MTG), sodium caseinate, microbial transglutaminase and meat slurry (O/SC + MTG + MS) and SPI, sodium caseinate and microbial transglutaminase (O/IPS + SC + MTG); their composition (proximate analysis and fatty acid profile) and physicochemical characteristics were examined. The lipid phase was a combination of healthy fatty acids from olive, linseed and fish oils, containing low proportions (15%) of saturated fatty acids (SFA) and high proportions of monounsaturated fatty acids (MUFA, 47%) and polyunsaturated fatty acids (PUFA, 36%), with a PUFA/SFA ratio >2, and a n‐6/n‐3 PUFA ratio of 0.4. All the oil‐in‐water emulsions showed high thermal and creamy stability. Results of penetration test and dynamic rheological properties showed la existencia de different types of oil‐in‐water emulsion structures according to stabilizing system of emulsion. Those structures ranged from concentrate solution‐like (stabilized only with SC) (gel strength 0.06 mJ) to gel‐like (samples containing MTG) behaviours (gel strength ranged between 3.4 and 6.2 mJ). Morphological differences in the organization of the network structure were observed (by scanning electron microscopy) as functions of the protein system used to stabilize the oil‐in‐water emulsions.     

Physicochemical and Functional Properties of Freeze-Dried and Oven Dried Corn Gluten Meals

The physicochemical and functional properties of convection oven- and freeze-dried gluten meals of two corn varieties were evaluated. The physicochemical properties (water solubility index, water absorption index, Hunter color parameters, and bulk density) and functional properties (water absorption, oil absorption, least gelation concentration, protein solubility, and emulsification properties) of convection-oven and freeze-dried corn gluten meals were compared with each other and soy flour. Freeze-dried corn gluten meals was observed to have lower bulk density (0.244-0.263 kg/m³) and was lighter in color (high L and ΔE) compared to their counterpart convection oven-dried gluten meals. Freeze-dried gluten meals from both corn varieties showed significantly higher oil absorption, water absorption, pH, emulsification, and protein solubility compared to oven-dried corn gluten meals. The gluten meals from both corn varieties had lower water absorption and bulk density but higher oil absorption than soy flour, suggesting the hydrophobic nature of corn proteins. Corn gluten meals formed thin (pourable) emulsions compared to soy flour emulsions, which were thick salad dressing type. Freeze- and convection oven-dried corn gluten meals showed significantly lower protein solubility measured at different pH than soy flour.     

Physicochemical and Functional Properties of Freeze-Dried and Oven Dried Corn Gluten Meals

ABSTRACT

The physicochemical and functional properties of convection oven- and freeze-dried gluten meals of two corn varieties were evaluated. The physicochemical properties (water solubility index, water absorption index, Hunter color parameters, and bulk density) and functional properties (water absorption, oil absorption, least gelation concentration, protein solubility, and emulsification properties) of convection-oven and freeze-dried corn gluten meals were compared with each other and soy flour. Freeze-dried corn gluten meals was observed to have lower bulk density (0.244–0.263 kg/m³) and was lighter in color (high L and ΔE) compared to their counterpart convection oven–dried gluten meals. Freeze-dried gluten meals from both corn varieties showed significantly higher oil absorption, water absorption, pH, emulsification, and protein solubility compared to oven-dried corn gluten meals. The gluten meals from both corn varieties had lower water absorption and bulk density but higher oil absorption than soy flour, suggesting the hydrophobic nature of corn proteins. Corn gluten meals formed thin (pourable) emulsions compared to soy flour emulsions, which were thick salad dressing type. Freeze- and convection oven–dried corn gluten meals showed significantly lower protein solubility measured at different pH than soy flour.     

Effect of Alcalase™ on olive pomace protein extraction

The effect of Alcalase^™ treatment on olive pomace protein extraction has been studied. Alcalase improves protein extraction from 5 to 30% of total protein. This improvement is not accompained by an increase in degree of protein hydrolysis, probably because protease activity is inhibited by secondary metabolites and the substrate is highly denatured and resistant to hydrolysis. The increase in protein extraction is attributed to fiber solubilization as a result of secondary activities of Alcalase. Protein extracts with a high content of soluble fiber have improved functional properties, with respect to olive pomace, such as water and oil absorption. Emulsifying and foaming activities were inappreciable. The products obtained represent a suitable source of soluble fiber and protein and may contribute to the improvement of the economic status of olive pomace by-product.     

Physicochemical properties of pronase-treated rice glutelin

Rice glutelin protein was extracted from defatted medium-grain rice by alkali extraction followed by acid precipitation. Extracted glutelin was hydrolyzed with Pronase E, a bacterial protease, and the functional properties of hydrolysates were evaluated. Nitrogen solubility of pronase-treated glutelin protein increased from pH 2 to pH 12. Similarly, foaming and emulsion properties of hydrolyzed protein also showed improved characteristics. The emulsion activity, expressed as the turbidity of diluted emulsions, was significantly greater (P≤0.05) for hydrolyzed samples. However, turbidity for all samples decreased with increased homogenization time, indicating a decrease in the volume of dispersed oil. There were significant changes in apparent viscosity as a function of shear rate, with viscosity decreasing with increasing shear rate. The viscosity of dispersions of all hydrolyzed samples was significantly lower than that of the native sample at all shear rates tested. Enzymatic hydrolysis of rice endosperm storage glutelin proteins appeared to improve the functional characteristics of the hydrolyzed proteins.     

Enzymatic Demulsification of the Oil-Rich Emulsion Obtained by Aqueous Extraction of Peanut Seeds

This study details the enzymatic destabilization of the emulsion formed during aqueous extraction of peanut seeds and the quality of the resulting oil. The emulsion was exposed to enzymatic treatment and pH adjustment. The experimental results suggest that the alkaline endopeptidase Mifong^®2709 was the most effective demulsifier, while Phospholipase A2 and pH adjustment had little effect on emulsion stability. The demulsifying conditions of Mifong^®2709 were optimized by response surface methodology (RSM). The optimal conditions which produced a free oil yield of ~94 % were: 1:1 water-to-emulsion ratio, enzyme concentration of 1,600 IU/g of emulsion and 70 min hydrolysis time at 50 °C. We found that these conditions resulted in a positive relationship (R ² = 0.9671) between free oil yield and the degree of protein hydrolysis. Increased protease treatment produced a smaller number of oil droplets, but the size of these droplets increased significantly. When compared to demulsified oil products obtained by using thermal treatment, the oil obtained by Mifong^®2709 exhibited lower acid and peroxide values, contained more tocopherols and had a longer induction time as determined in the Rancimat test. The high yield and quality of peanut oil obtained by enzymatic treatment makes enzyme demulsification a promising approach to recovering free oil in aqueous extractions of peanuts.     

Functional properties of hydrothermally cooked soy protein products

The effects of hydrothermal cooking on the functional properties of defatted soy flour, aqueous alcohol washed soy protein concentrate, and soy protein isolate were determined in samples that were treated at 154°C by infusing steam under pressure for 11, 19, 30, and 42 s, and then spray dried. Hydrothermal cooking increased the nitrogen solubility index (NSI) of the concentrate from 15 to 56% and altered the solubility profile from a flat profile to one more typical of native soy protein. Hydrothermal cooking also improved foaming and emulsifying properties of the concentrate. For isolate, hydrothermal cooking also improved NSI and foaming and emulsifying properties, although the improvements were less dramatic than with concentrate. NSI and emulsifying properties of the flour were improved by some processing conditions, but foaming properties were not improved by hydrothermal cooking. Dramatically increased protein solubility of concentrate and modestly improved protein solubilities of flour and isolate by hydrothermal cooking, which will also inactivate trypsin inhibitors and microorganisms, have considerable practical significance to protein ingredient manufacturers and those who use these ingredients in foods and industrial products.     

Limited hydrolysis of soy proteins with endo- and exoproteases

Changes in the native state and functional properties of soy protein achieved by limited proteolysis of soy flour were investigated. Different enzyme-to-substrate ratios (E/S) were used to obtain low (3–5%) and medium (5–10%) degrees of hydrolysis (DH). Six protease preparations (three with predominately exopeptidase activities and three with predominately endopeptidase activities) were evaluated, and their effects on solubility, emulsification capacity, SDS-PAGE profiles, and denaturation enthalpies were characterized. Endoproteases (Multifect^® Neutral, Protex^? 6L, and Multifect^® P-3000) and exoproteases (Fungal Protease Concentrate, Experimental Fungal Protease #1, and Experimental Fungal Protease #2) yielded similar increases in soy protein solubility. The modifications to the soy peptide profile were similar for the three exoprotease mixtures at a 1% E/S ratio, whereas the extent of hydrolysis with Protex^? 6L was more pronounced than with the two other endoproteases (Multifect^® Neutral and Multifect^® P-3000). The emulsification capacity of protease-modified soy flour declined regardless of DH and enzyme type (exo- or endoprotease). After hydrolysis to >4% DH, denaturation enthalpies of glycinin and β-conglycinin decreased significantly, whereas hydrolysis to lower DH did not affect these values.     

Influence of Soy Protein Isolate Prepared by Phosphate‐Assisted Hydrothermal Cooking on the Gelation of Myofibrillar Protein

The poor solubility and functionalities of soy protein concentrate (SPC) limits its utilization in meat products. Phosphate‐assisted hydrothermal cooking (HTC) was applied to refunctionalize SPC in this work. The resultant soy protein isolate (SPI) was used as an ingredient for improving the gelation of porcine myofibrillar protein (MP) which was induced by microbial transglutaminase (MTGase). The addition of sodium tripolyphosphate (STPP) enhanced the refunctionalization efficiency of HTC and increased the phosphorus content in the obtained SPI. Dynamic rheological analysis indicated that this SPI itself could not form a gel with the help of MTGase. However, the SEM observation revealed that the presence of this SPI strengthened the gel network of MP and made it become denser and more ordered. As a result, the mechanical properties and water holding capacity of the MP gel were significantly improved by this SPI prepared by phosphate‐assisted HTC.     

新型天然橡胶吸油材料的制备及性能

以天然橡胶(NR)接枝马来酸酐(NR-g-MAH)和NR接枝甲基丙烯酸甲酯(NR-g-MMA)为NR/甲基丙烯酸十八酯-丙烯酸丁酯-苯乙烯共聚物(SMA-BA-St)吸油材料的增容剂,研究了各组分配比、增容剂的种类及用量对吸油材料吸油能力和力学性能的影响,并采用热重分析及扫描电子显微镜对吸油材料进行了表征。结果表明,以NR-g-MAH为增容剂时,吸油材料的力学性能和吸油率优于以NR-g-MMA为增容剂时的吸油材料;当NR/SMA-BA-St/NR-g-MAH(质量比)为100/10/5时,材料具有较好的力学性能、吸油性能和老化性能;随着增容剂接枝率的增大,吸油材料的力学性能和吸油性能呈上升趋势;吸油材料在CCl4、甲苯、苯、柴油和机油中的饱和吸油率分别为37.48,32.45,29.26,23.06,16.79g/g,保油率可超过85%;对CCl4的二次吸油率可达30g/g;以NR-g-MAH和NR-g-MMA增容吸油材料的热稳定性比SMA-BA-St优异,且在常温下使用很稳定;NR-g-MAH的增容效果优于NR-g-MMA,有效改善了NR与SMA-BA-St的相容性。