奇异摄动系统的H∞控制: 基于奇异系统的方法

实际系统的奇异系统模型往往通过忽略系统的奇异摄动系统模型微分项系数矩阵中的小时间参数得到.然而, 传统的奇异系统控制器设计很少考虑微分项系数矩阵的摄动. 本文拓展了现有奇异系统输出动态反馈H_∞控制器的设计, 使得当实际闭环系统中存在小时间参数时, 仍然能保持稳定并且满足一定的H_∞性能指标. 仿真算例说明了本文提出方法的有效性.     

奇异摄动时滞系统次优控制的Chebyshev多项式级数方法

研究奇异摄动时滞系统次优控制的近似设计问题.基于奇异摄动的快慢分解理论,将系统的最优控制问题转化为无时滞快子问题和线性时滞慢子问题;利用Chebyshev多项式级数方法将时滞慢子问题的近似求解问题转化为线性代数方程组的求解问题,进而得到原系统的次优控制律,该控制律由Chebyshev多项式级数的基向量表示.仿真算例表明了该方法的有效性.     

一类带有时滞的广义系统的H∞控: 一种LMI方法

利用线性矩阵不等式方法研究了一类带有时滞的广义系统的H_∞ 控制问题. 在一定条件下, 一个时滞奇异系统可以转化成由一个微分方程和一个代数方程组成的系统, 基于线性矩阵不等式方法给出了使这类系统H_∞干扰抑制性能指标满足要求的无记忆状态反馈控制设计.     

一种基于T-S模糊模型的混沌控制方法

用T-S模糊系统来逼近非线性系统,它的IF-THEN规则后件由线性状态空间子系统构成,进而可以应用模糊系统的控制理论求得模糊控制器,用此非线性控制器来控制非线性系统,以求良好的控制效果;将模糊控制技术应用于混沌控制中,可以克服反馈线性化等传统方法对参数完全精确已知的限制;模糊规则后件部分以局部线性方程形式给出的T-S模糊模型可以通过调整相关参数很好地逼近混沌系统,基于该模型采用平行分散补偿技术设计出具有相同规则数目的模糊控制器,控制器所有参数可以通过求解一组线性矩阵不等式一次性得到。仿真结果验证了该方法的有效性。     

基于T-S模糊模型的多时滞非线性网络切换控制系统非脆弱H∞控制

针对一类控制器增益存在摄动的不确定非线性网络切换系统,在系统同时存在随机时变时滞和数据包丢失的情况下,研究系统的非脆弱H_∞控制问题.首先,利用T-S模型,将非线性网络切换系统建模为网络切换模糊系统;其次,将数据包丢失作为时滞处理,并采用Bernoulli分布的随机序列描述该时滞;再次,采用平均驻留时间的方法(ADT)设计系统的切换律及非脆弱状态反馈控制器,并给出网络切换模糊时滞系统指数稳定的平均驻留时间条件;最后,结合李雅普诺夫(LKF)方法给出系统均方指数稳定且满足H_∞性能指标的充分条件.仿真结果验证了所提出设计方法的有效性.     

参数服从马尔可夫切换中立型时滞系统鲁棒H∞ 控制

研究参数服从马尔可夫切换及具有仿射不确定性的中立型时滞系统H_∞ 状态反馈控制器设计问题. 通过将系统表示为等价的奇异系统, 并利用Moon不等式放大向量积, 基于线性矩阵不等式, 得到了使系统存在无记忆H_∞ 状态反馈控制器与时滞相关的新的充分条件.     

奇异摄动控制系统:理论与应用

系统地回顾了近年来奇异摄动控制技术的发展,主要包括线性奇异摄动系统的稳定性分析与镇定、最优控制、H_∞控制,非线性奇异摄动系统的镇定、优化控制和基于积分流形的几何方法,以及奇异摄动技术在实际工业,例如机器人领域、航天技术领域和工程工业、制造业等中的成功应用.并指出了这一领域进一步研究的方向.     

模糊奇异摄动系统H∞滤波

针对一类非线性奇异摄动系统,建立基于T-S模糊模型的模糊奇异摄动系统模型,通过Lyapunov方法和Schur补定理,研究其H∞滤波问题.将系统H∞滤波器设计归结为求解一组与摄动参数ε无关的线性矩阵不等式,从而避免由ε引起数值求解的病态问题.所获得的滤波器使闭环系统渐近稳定并能达到给定的H∞性能指标.该方法适用于标准和非标准非线性奇异摄动系统,仿真实例表明了所提出方法的有效性.     

不确定多通道奇异时滞系统分散H∞控制

针对不确定多通道奇异时滞大系统, 研究其分散鲁棒H_∞控制问题. 假定不确定性是时不变、范数有界. 基于奇异系统Lyapunov稳定性理论, 通过设定Lyapunov-Krasovskii矩阵为合适的块对角结构, 推导出了使不确定多通道奇异时滞大系统可鲁棒镇定, 且满足一定的扰动水平的充分条件即一组线性矩阵不等式(LMIs)有可行解. 给出了具有期望阶数的分散输出反馈H_∞控制器的设计方法.     

含正弦扰动奇异摄动时滞系统的最优减振控制

研究奇异摄动时滞系统在正弦扰动下的最优减振控制问题．基于奇异摄动的快慢分解理论,将原最优控制问题转化为无时滞快子问题和受扰线性时滞慢子问题,通过摄动法和前馈补偿技术求解时滞慢子系统的最优控制问题,得到了系统的前馈反馈组合控制(FFCC)律及其存在唯一性条件．FFCC律由线性解析项和共态向量无穷级数和表示的时滞补偿项组成,其中线性解析项可通过求解Riccati方程和Sylvester方程得到,时滞补偿项通过递推求解共态向量方程得到,仿真算例表明了方法的有效性．     

Only connect: teaching, technology and telesis

Abstract This paper describes an approach to the design of interactive multimedia materials being developed in a European Community project. The developmental process is seen as a dialogue between technologists and teachers. This dialogue is often problematic because of the differences in training, experience and culture between them. Conditions needed for fruitful dialogue are described and the generic model for learning design used in the project is explained.     

European Community policy and the market

Abstract This paper starts with some reflections on the policy considerations and priorities which are shaping European Commission (EC) research programmes. Then it attempts to position the current projects which seek to capitalise on information and communications technologies for learning in relation to these priorities and the apparent realities of the marketplace. It concludes that while there are grounds to be optimistic about the contribution EC programmes can make to the efficiency and standard of education and training, they are still too technology driven.     

一种自适应子融合集成多分类器方法

融合集成方法已经广泛应用在模式识别领域,然而一些基分类器实时性能稳定性较差,导致多分类器融合性能差,针对上述问题本文提出了一种新的基于多分类器的子融合集成分类器系统。该方法考虑在度量层融合层次之上通过对各类基多分类器进行动态选择,票数最多的类别作为融合系统中对特征向量识别的类别,构成一种新的自适应子融合集成分类器方法。实验表明,该方法比传统的分类器以及分类融合方法识别准确率明显更高,具有更好的鲁棒性。     

Avoiding semantic and temporal gaps in developing software intensive systems

Development of software intensive systems (systems) in practice involves a series of self-contained phases for the lifecycle of a system. Semantic and temporal gaps, which occur among phases and among developer disciplines within and across phases, hinder the ongoing development of a system because of the interdependencies among phases and among disciplines. Such gaps are magnified among systems that are developed at different times by different development teams, which may limit reuse of artifacts of systems development and interoperability among the systems. This article discusses such gaps and a systems development process for avoiding them.     

Designing economic np control charts: A programmed simulation approach

This paper presents control charts models and the necessary simulation software for the location of economic values of the control parameters. The simulation program is written in FORTRAN, requires only 10K of main storage, and can run on most mini and micro computers. Two models are presented - one describes the process when it is operating at full capacity and the other when the process is operating under capacity. The models allow the product quality to deteriorate to a further level before an existing out-of-control state is detected, and they can also be used in situations where no prior knowledge exists of the out-of-control causes and the resulting proportion defectives.     

The development of robot art

Going through a few examples of robot artists who are recognized worldwide, we try to analyze the deepest meaning of what is called “robot art” and the related art field definition. We also try to highlight its well-marked borders, such as kinetic sculptures, kinetic art, cyber art, and cyberpunk. A brief excursion into the importance of the context, the message, and its semiotics is also provided, case by case, together with a few hints on the history of this discipline in the light of an artistic perspective. Therefore, the aim of this article is to try to summarize the main characteristics that might classify robot art as a unique and innovative discipline, and to track down some of the principles by which a robotic artifact can or cannot be considered an art piece in terms of social, cultural, and strictly artistic interest. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Explanation and prediction: an architecture for default and abductive reasoning

Although there are many arguments that logic is an appropriate tool for artificial intelligence, there has been a perceived problem with the monotonicity of classical logic. This paper elaborates on the idea that reasoning should be viewed as theory formation where logic tells us the consequences of our assumptions. The two activities of predicting what is expected to be true and explaining observations are considered in a simple theory formation framework. Properties of each activity are discussed, along with a number of proposals as to what should be predicted or accepted as reasonable explanations. An architecture is proposed to combine explanation and prediction into one coherent framework. Algorithms used to implement the system as well as examples from a running implementation are given.     

Three Process Perspectives: Organizations, Teams, and People

This paper provides the author's personal views and perspectives on software process improvement. Starting with his first work on technology assessment in IBM over 20 years ago, Watts Humphrey describes the process improvement work he has been directly involved in. This includes the development of the early process assessment methods, the original design of the CMM, and the introduction of the Personal Software Process (PSP)^SM and Team Software Process (TSP){^SM}. In addition to describing the original motivation for this work, the author also reviews many of the problems he and his associates encountered and why they solved them the way they did. He also comments on the outstanding issues and likely directions for future work. Finally, this work has built on the experiences and contributions of many people. Mr. Humphrey only describes work that he was personally involved in and he names many of the key contributors. However, so many people have been involved in this work that a full list of the important participants would be impractical.     

基于复小波噪声方差显著修正的SAR图像去噪

提出了一种基于复小波域统计建模与噪声方差估计显著性修正相结合的合成孔径雷达(Synthetic Aperture Radar,SAR)图像斑点噪声滤波方法。该方法首先通过对数变换将乘性噪声模型转化为加性噪声模型,然后对变换后的图像进行双树复小波变换(Dualtree Complex Wavelet Transform,DCWT),并对复数小波系数的统计分布进行建模。在此先验分布的基础上,通过运用贝叶斯估计方法从含噪系数中恢复原始系数,达到滤除噪声的目的。实验结果表明该方法在去除噪声的同时保留了图像的细节信息,取得了很好的降噪效果。     

基于QTE的蒙古文显示机制研究与实现

蒙古语言是中国蒙古族使用的通用语言,由于蒙古文区别于其他文字的书写方式和其自身变形机制等特点,在很多通用的文字处理引擎中都不被支持。在嵌入式产品开发与应用领域中Linux加QTE已经成为流行方式。该文给出了一种在QTE环境上实现基于标准Unicode的蒙古文点阵显示和变形算法, 并自定义了支持蒙古文的QTE组件,扩展了QTE功能,为在Linux加QTE方式的嵌入式体系结构中处理蒙古文提供了一种解决方法。