Flurbiprofen axetil loaded coaxial electrospun poly(vinyl pyrrolidone)–nanopoly(lactic‐co‐glycolic acid) core–shell composite nanofibers: Preparation,characterization, and anti‐adhesion activity

Flurbiprofen axetil (FA)‐loaded coaxial electrospun poly(vinyl pyrrolidone) (PVP)–nanopoly(lactic‐co‐glycolic acid) core–shell composite nanofibers were successfully fabricated by a facile coaxial electrospinning, and an electrospun drug‐loaded system was formed for anti‐adhesion applications. The FA, which is a kind of lipid microsphere nonsteroidal anti‐inflammatory drug, was shown to be successfully adsorbed in the PVP, and the formed poly(lactic‐co‐glycolic acid) (PLGA)/PVP/FA composite nanofibers exhibited a uniform and smooth morphology. The cell viability assay and cell morphology observation revealed that the formed PLGA/PVP/FA composite nanofibers were cytocompatible. Importantly, the loaded FA within the PLGA/PVP coaxial nanofibers showed a sustained‐release profile and anti‐adhesion activity to inhibit the growth of the IEC‐6 and NIH3T3 model cells. With the significantly reduced burst‐release profile, good cytocompatibility, and anti‐adhesion activity, the developed PLGA/PVP/FA composite nanofibers were proposed to be a promising material in the fields of tissue engineering and pharmaceutical science. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41982.     

Hemocompatibility of electrospun halloysite nanotube‐ and carbon nanotube‐doped composite poly(lactic‐co‐glycolic acid) nanofibers

One of the major problems of nanofiber scaffold or other devices like cardiovascular or blood‐contacting medical devices is their weak mechanical properties and the lack of hemocompatibility of their surfaces. In this study, halloysite nanotubes (HNTs) and carbon nanotubes (CNTs) were incorporated within poly(lactic‐co‐glycolic acid) (PLGA) nanofibers and the mechanical property and hemocompatibility of both types of composite nanofibers with different doping levels were thoroughly investigated. The morphology and internal distribution of the doped nanotubes within the nanofibers were characterized using scanning electron microscopy and transmission electron microscopy. Mechanical properties of the electrospun nanofibers were tested using a material testing machine. The hemocompatibility of the composite nanofibers was examined through hemolytic and anticoagulant assay, respectively. We show that the doped HNTs or CNTs are distributed in the nanofibers with a coaxial manner and the incorporation of HNTs or CNTs does not significantly change the morphology of the PLGA nanofibers. Importantly, the incorporation of HNTs or CNTs within PLGA nanofibers significantly improves the mechanical property of PLGA nanofibers, and PLGA nanofibers with or without doping of the HNTs and CNTs display good anticoagulant property and negligible hemolytic effect to human red blood cells. With the enhanced mechanical property, great hemocompatibility, and previously demonstrated biocompatibility of both HNTs‐ and CNTs‐doped composite PLGA nanofibers, these composite nanofibers may be used as therapeutic artificial tissue/organ substitutes for tissue engineering applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and performance evaluation of tetracycline hydrochloride loaded wound dressing mats based on electrospun nanofibrous poly(lactic acid)/poly(ϵ‐caprolactone) blends

In this article, we present the drug‐release rate, water uptake, water permeability, morphology, and mechanical properties of a series of active wound dressing nanofibrous mats prepared via an electrospinning process of poly(lactic acid) (PLA), poly(?‐caprolactone) (PCL), and their (50/50) blends loaded with different doses of tetracycline hydrochloride antibiotic. The performance of these active wound dressings in terms of a sustained and suitable drug‐release rate, adequate water uptake and water permeability, and antibacterial activities were compared with those of a commercial wound dressing (Comfeel Plus). The results show that the dressings made from PCL and PLA/PCL blends showed better performance compared with the commercial wound dressing sample as far as these properties were concerned. The improved performance could be explained on the basis of the nanofibrous structure of the mats and the hydrophilicity of PCL and PLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

In vitro degradation and drug‐release behavior of electrospun,fibrous webs of poly(lactic‐co‐glycolic acid)

Ultrafine fibrous webs of poly(lactide‐co‐glycolic acid) (PLGA) containing the bactericidal antibiotic drug rifampin were prepared by electrospinning, and their properties were investigated for wound‐dressing applications. Because PLGA is a biodegradable and biocompatible polymer, it is one of the best materials for the preparation of wound‐dressing substrates. Through this investigation of PLGA/rifampin electrospun webs, we found that the in vitro degradation reached approximately 60% in 10 days, and the drug release from the webs showed a fast and constant profile suitable for wound‐dressing applications. Also, we observed that both the web‐degradation rate and the drug‐release rate increased as the drug concentration in the PLGA/rifampin electrospun webs and the content level of glycolide units in the PLGA polymer matrix increased. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Dilute solution viscosity properties of high molar mass poly(acrylonitrile‐co‐itaconic acid)

The intrinsic viscosities [η] and viscosity constants of high molar mass poly(acrylonitrile‐co‐itaconic acid) copolymer in DMF were obtained by the methods of Huggin, Fuoss, Martin and Schulz‐Blaschke. The values of [η] by averaging procedures suggested by Sakai were close to those from Huggins method. There was an abnormal positive deviation from the rectilinearity of the reduced viscosity (η_red) versus concentration (c) plot in all the cases in the dilute regime, which was attributed to the polyelectrolytic effect. This was further confirmed by the analysis by Fuoss method. The deviation from the Huggins dependence is discussed for a good solvent (DMF) alone and in the presence of a non‐solvent, methanol. The deviation cross‐over points c′ and c″ changed with molecular weight, and the concentration range greater than c″ and less than c* was taken for a more reliable determination of intrinsic viscosity. The non‐solvent played a key role in determining the polymer–polymer interactions. The Huggins coefficient increased and the cross‐over points c′ and c″ shifted to higher concentration regime as the mixed solvent became poorer. The inter‐ and intra‐polymer interactions increased in the presence of methanol. In poor solvent, the enhanced intramolecular interactions caused the polymer to shrink in size, causing a reduction in [η] and hydrodynamic volume. Copyright © 2003 Society of Chemical Industry     

Effect of molecular weight and end capping on poly(lactic‐co‐glycolic acid) ultrasound contrast agents

Ultrasound contrast agents (CA) consist of stabilized gas bubbles that, when injected intravenously, provide an acoustic impedance mismatch, producing additional contrast to a diagnostic ultrasound scan. These agents must be smaller than 8 μm in order to pass safely through the capillaries, contain gas for an impedance mismatch and should be stable enough to survive the duration of the imaging session. A double emulsion technique has previously been optimized within our laboratory to create CA with 50:50 poly (lactic‐co‐glycolic acid) (PLGA). Although a great deal of research has focused on the effects of molecular weight and end capping on solid PLGA particles, very little has been done to examine the effects of these parameters on hollow CAs formed in a double emulsion. Non‐end capped PLGA was found to provide maximum enhancement at a molecular weight of 66.0 kDa, giving an ultrasound enhancement of roughly 18.5 dB. The enhancement demonstrated by CA formed using the end‐capped PLGA rose to a maximum enhancement of 19 dB at the highest commercially available molecular weight of 82.4 kDa. A strong correlation was seen between ultrasound enhancement, stability under ultrasonic conditions, surface morphology and zeta potential. This study shows the influence of polymer characteristics on the resulting properties of CA and the ability to tailor CAs to particular applications by varying the polymer choice. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers     

Covalent immobilization of β‐galactosidase onto electrospun nanofibers of poly (AN‐co‐MMA) copolymer

Immobilization of β‐galactosidase in poly (acrylonitrile‐co‐methyl methacrylate) poly (AN‐co‐MMA) Nanofibers was studied by electrospinning, and a spacer‐arm i.e., (Polyethyleneimine (PEI)) was covalently attached by the reaction of carbonyl groups of Poly (AN‐co‐MMA) nanofibers. β‐galactosidase was then covalently immobilized through the spacer‐arm of the Poly (AN‐co‐MMA) nanofibers by using glutaraldehyde (GA) as a coupling agent. Nanofibers mode of interaction was proven by FTIR and thermal gravimetric analysis and supported by morphological changes recognized through SEM examination. Factors affecting the modification process such as PEI concentration, reaction time, and reaction temperature have been studied. Its influence on the amount of coupled PEI was consequently correlated to the changes of the catalytic activity and the retained activity of immobilized enzyme, the main parameters judging the success of the immobilization process. Evidences of Poly (AN‐co‐MMA) nanofibers modification were extracted from morphological changes recognized through SEM examination. The maximum activity (V_max) and michaelis constant (K_m) of immobilized enzyme were found to be 8.8 μmole/min mg protein and 236.7 mM, respectively. Stabilities of the immobilized β‐galactosidase were obviously improved. The optimum temperature for β‐galactosidase immobilized on the spacer‐arm attached nanofiber was 5°C higher than that of the free enzyme and was also significantly broader. The immobilized β‐galactosidase had better resistance to temperature inactivation than did the free form. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Heterogeneous hydrolytic degradation of poly(lactic‐co‐glycolic acid) microspheres: Mathematical modeling

A new mathematical model for the prediction of the heterogeneous hydrolytic degradation of poly(D,L‐lactide‐co‐glycolide) (PLGA)‐based microspheres was developed. The model takes into account the autocatalytic effect of carboxylic groups and polymer composition on the degradation rate. It is based on mass balances for the different species, considering the kinetic and mass transport phenomena involved. The model estimates the evolution of average molecular weight, mass loss, and morphological change of the particles during degradation, and it was validated with novel experimental data. Theoretical predictions are in agreement with the hydrolysis data of PLGA microspheres (error values less than 5%). The model is able to predict the effect of particle size and molecular weight on the degradation of PLGA‐based microspheres and estimates the morphological changes of the particles due to the autocatalytic effect. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45464.     

Properties of aligned poly(L‐lactic acid) electrospun fibers

Poly(L‐lactic acid) (PLLA)‐aligned fibers with diameters in the nano‐ to micrometer size scale are successfully prepared using the electrospinning technique from two types of solutions, different material parameters and working conditions. The fiber quality is evaluated using scanning electron microscopy (SEM) to judge fiber diameter, diameter uniformity, orientation, and appearance of defects or beads. The smoothest fibers, most uniform in diameter and defect free, were found to be produced from 10% w/v chloroform/dimethylformamide solution using an accelerating voltage from 10–20 kV. Addition of 1.0% multiwalled carbon nanotubes (MWCNT) into the electrospinning solution decreases fiber diameter, improves diameter uniformity, and slightly increases molecular chain alignment. The fibers were cold crystallized at 120°C and compared with their as‐spun counterparts. The influences of the crystalline phase and/or MWCNT addition were examined using fiber shrinkage, temperature‐modulated calorimetry, X‐ray diffraction, and dynamic mechanical analysis. Crystallization increases the glass transition temperature, T_g, slightly, but decreases the overall fiber alignment through shrinkage‐induced buckling of the fibers when heated above T_g. MWCNT addition has little impact on T_g, but significantly increases the orientation of crystallites. MWCNT addition slightly reduces the dynamic modulus, whereas crystallization increases the modulus in both neat‐ and MWCNT‐containing fibers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41779.     

Radiation‐induced crosslinking and mechanical properties of blends of poly(lactic acid) and poly(butylene terephthalate‐co‐adipate)

Blends of poly(L ‐lactic acid) (PLLA) and poly (butylene terephthalate‐co‐adipate) (PBTA) were prepared at ratios of 50 : 50, 60 : 40, and 80 : 20 by melt blending in a Laboplastomill. Improved mechanical properties were observed in PLLA when it was blended with PBTA, a biodegradable flexible polymer. Irradiation of these blends with an electron beam (EB) in the presence of triallyl isocyanurate (TAIC), a polyfunctional monomer, did not cause any significant improvement in the mechanical properties, although the gel fraction increased with the TAIC level and dose level. Irradiation of the blends without TAIC led to a reduction in the elongation at break (E_b) but did not show a significant effect on the tensile strength. E_b of PBTA was unaffected by EB radiation in the absence of TAIC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Water‐assisted formation of honeycomb films of poly(L‐lactic‐co‐glycolic acid)

The ordered honeycomb structures of poly(L ‐lactic‐co‐glycolic acid) and poly(D ,L ‐lactic‐co‐glycolic acid) fabricated in a humid atmosphere were reported in this paper. It was found that surfactants were important in the formation of honeycomb films of hydrophobic polymer. The affecting factors, such as the environment temperature, the atmosphere humidity, and the concentration of the polymer solution of the honeycomb porous structure, were also tested. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1013–1018, 2006     

Grafting of telechelic poly(lactic‐co‐glycolic acid) onto O2 plasma‐treated polypropylene flakes

An operating window, which is bounded by two temperatures and draw ratios, defines the stable and defect‐free stretching region of a polymer film. Physical properties including the coefficient of thermal expansion (CTE), birefringence, and Young's modulus of a recyclable polyimide (PIR) film were measured under stretching conditions. While values of birefringence and Young's modulus increased with increasing stretching stress in the machine direction, the CTE was found to decrease. A semiempirical model for the prediction of birefringence and Young's modulus under stretching conditions was developed, from which the CTE could be estimated from the Young's modulus data. Theoretically evaluated physical properties were found to be in qualitative agreement with the experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

A study on solution properties of poly(N,N‐diethylacrylamide‐co‐acrylic acid)

Poly(N,N‐diethylacrylamide) (PDEA), poly(acrylic acid) (PAA), and a series of (N,N‐diethylacrylamide‐co‐acrylic acid) (DEA‐AA) random copolymers were synthesized by the method of radical polymerization. The measurement of turbidity showed that the phase behaviors of the brine solutions of the copolymers changed dramatically with the mole fraction of DEA (x) in these copolymers. Copolymers cop6 (x = 0.06) and cop11 (x = 0.11) in which acrylic acid content was higher presented the upper critical solution temperature (UCST) phase behaviors similar to PAA. Copolymer cop27 (x = 0.27) presented the lower critical solution temperature (LCST) behavior similar to PDEA. While copolymer cop18 (x = 0.18) in which acrylic acid content was moderate presented both UCST and LCST behaviors. The solution properties of the polymers were investigated by measurements of viscosity, fluorescence, and pH. It is reasonable to suggest that the sharp change of the phase behavior may be attributed to the interaction between acrylamide group and carboxylic group in the (DEA‐AA) copolymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Formation of ordered microporous films with water as templates from poly(D,L‐lactic‐co‐glycolic acid) solution

Recently a method that uses water droplets at the air–solution interface as an ordered template was reported for the preparation of ordered micrometer‐size honeycomb structures. Here we show that the method can also be used for formation of honeycomb‐like porous films from random copolymers with certain hydrophilicity, besides those polymers with defined structures such as block copolymers, starlike homopolymers, amd amphiphilic polymers. This demonstrates that the stabilization of water droplets is the key factor for the regular structure. Also we indicate that size and structure of the films can be regulated by such variables as concentration and atmospheric humidity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 1846–1850, 2003     

Effect of composition on morphology structure and cell affinity of poly(caprolactone‐co‐glycolide)‐co‐poly(ethylene glycol) microspheres

Poly(caprolactone‐co‐glycolide)‐co‐poly(ethylene gylcol) copolymers (PCEG) with various composition were synthesized by copolymerization of GA, CL, and PEG. PCEG microspheres were fabricated by oil‐in‐water (o/w) emulsion and solvent‐evaporation technique. Effect of chemical composition on hydrophilicity, crystallinity, and degradation of the PCEG was investigated. It was demonstrated that morphology structure of the microspheres was greatly influenced by chemical composition and hydrophilicity of the PCEG polymer. PCEG microspheres could change from a smooth structure to a regular porous structure and an irregular structure. Moreover, the pore size of them increased with increment of PEG content and length. Cell attachment and growth on the PCEG microspheres were evaluated by using mouse NIH 3T3 fibroblasts as model cells in vitro. The result showed that the PCEG microspheres with large porous structure were more favorable for cell attachment and growth. Thus the PCEG microspheres with rapid degradation rate and large porous structure possess potential use as injectable scaffolds in tissue engineering. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 132, 42861.     

Characterization of polyacrylonitrile,poly(acrylonitrile‐co‐vinyl acetate), and poly(acrylonitrile‐co‐itaconic acid) based activated carbon nanofibers

In this study, three different acrylonitrile (AN)‐based polymers, including polyacrylonitrile (PAN), poly(acrylonitrile‐co‐vinyl acetate) [P(AN‐co‐VAc)], and poly(acrylonitrile‐co‐itaconic acid) [P(AN‐co‐IA)], were used as precursors to synthesize activated carbon nanofibers (ACNFs). An electrospinning method was used to produce nanofibers. Oxidative stabilization, carbonization, and finally, activation through a specific heating regimen were applied to the electrospun fibers to produce ACNFs. Stabilization, carbonization, and activation were carried out at 230, 600, and 750 °C, respectively. Scanning electron microscopy, thermogravimetric analysis (TGA), and porosimetry were used to characterize the fibers in each step. According to the fiber diameter variation measurements, the pore extension procedure overcame the shrinkage of the fibers with copolymer precursors. However, the shrinkage process dominated the scene for the PAN homopolymer, and this led to an increase in the fiber diameter. The 328 m²/g Brunauer–Emmett–Teller surface area for ACNFs with PAN precursor were augmented to 614 and 564 m²/g for P(AN‐co‐VAc) and P(AN‐co‐IA), respectively. The TGA results show that the P(AN‐co‐IA)‐based ACNFs exhibited a higher thermal durability in comparison to the fibers of PAN and P(AN‐co‐VAc). The application of these copolymers instead of AN homopolymer enhanced the thermal stability and increased the surface area of the ACNFs even in low‐temperature carbonization and activation processes. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44381.     

Nanocomposites based on poly(butylene adipate‐co‐terephthalate) and montmorillonite

Nanocomposites based on biodegradable poly(butylene adipate‐co‐terephthalate) (PBAT) and layered silicates were prepared by the melt intercalation method. Nonmodified montmorillonite (MMT) and organo‐modified MMTs (DA‐M, ODA‐M, and LEA‐M) by the protonated ammonium cations of dodecylamine, octadecylamine, and N‐lauryldiethanolamine, respectively, were used as the layered silicates. The comparison of interlayer spacing between clay and PBAT composites with inorganic content 3 wt % measured by X‐ray diffraction (XRD) revealed the formation of intercalated nanocomposites in DA‐M and LEA‐M. In case of PBAT/ODA‐M (3 wt %), no clear peak related to interlayer spacing was observed. From morphological studies using transmission electron microscopy, the ODA‐M was found to be finely and homogeneously dispersed in the matrix polymer, indicating the formation of exfoliated nanocomposite. When ODA‐M content was increased, the XRD peak related to intercalated clay increased. Although the exfoliated ODA‐M (3 wt %) nanocomposite showed a lower tensile modulus than the intercalated DA‐M and LEA‐M (3 wt %) composites, the PBAT/ODA‐M composite with inorganic content 5 wt % showed the highest tensile modulus, strength, and elongation at break among the PBAT composites with inorganic content 5 wt %. Their tensile properties are discussed in relation to the degree of crystallinity of the injection molded samples. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 386–392, 2005     

Effect of ionic salts on the processing of poly(2‐acrylamido‐2‐methyl‐1‐propane sulfonic acid) nanofibers

We studied the effect of nanofiber uniformity on electrospinning due to the charging of added ionic salts, as compared to the droplet current nonadded ionic salts and the charge‐to‐mass ratio of a highly conducting liquid. Various ionic salt concentrations were investigated. For an ionic salt concentration of 0.01 mol %, an applied electric field of 15 kV, and a spinning distance of 15 cm, the experimental results show that uniform nanofibers that did not contain any beads were synthesized with an optimal ionic salt concentration, when the convective current was two orders of magnitude higher than the nonadded ionic salt droplet current. The obtained fibers were uniform, with diameters of around 70 nm. We were able to produce these uniform nanofibers by controlling the balance between two opposing factors during electrospinning, by increasing the number of charge carriers and decreasing the viscosity of the solution. The effect of the ionic salts on the morphology of the electrospun nanofibers was investigated with field‐emission scanning electron microscopy. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1388–1393, 2005     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Syntheses of poly(lactic acid‐co‐glycolic acid) serial biodegradable polymer materials via direct melt polycondensation and their characterization

The optimal synthetic conditions of poly(lactic acid‐co‐glycolic acid) (PLGA) via melt copolycondensation directly from L ‐lactic acid (L ‐LA) and glycolic acid (GA) with a feed molar ratio of 50/50 are discussed; the important drug‐delivery carrier PLGA50/50 is used as a special example. With reaction conditions of 165°C and 70 Pa and with 0.5 wt % SnCl₂ as the catalyst, 10 h of polymerization gave the L ‐PLGA50/50 with the biggest intrinsic viscosity ([η]), 0.1993 dL/g. The optimal synthetic conditions were verified by the synthesis of D,L ‐PLGA50/50 with D,L ‐lactic acid (D,L ‐LA) instead of L ‐LA, but the biggest [η] was 0.2382 dL/g. Under the same synthetic conditions with L ‐LA and D,L ‐LA as starting materials, serial PLGA with different molar feed ratios, including 100/0, 90/10, 70/30, 50/50, 30/70, 10/90, and 0/100, were synthesized via simple and practical direct melt copolycondensation, and their solubilities were investigated. When the glycolic acid feed molar percentage was equal to or more than 70%, solubilities in tetrahydrofuran and CHCl₃ became worse, and some samples were even wholly insoluble. These biodegradable polymers were also systematically characterized with gel permeation chromatography, Fourier transform infrared spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry, and X‐ray diffraction. PLGA synthesized from L ‐LA and D,L ‐LA had many differences in weight‐average molecular weight (M_w), glass‐transition temperature, crystallinity, and composition. When the molar feed ratio of LA to GA was 50/50, both the [η] and M_w values of D,L ‐PLGA were higher than those of L ‐PLGA. With D,L ‐LA as the starting material, the structure of the PLGA copolymer was relatively simple, and its properties were apt to be controlled by its GA chain segment. When the feed molar percentage of the monomer (LA or GA) was more than or equal to 90%, the copolymer was apt to be crystalline, and the aptness was more obvious for the L ‐LA monomer. The composition percentage of GA in PLGA was not only higher than the feed molar percentage of GA, but also, the GA percentage in D,L ‐PLGA was higher than in L ‐PLGA. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 244–252, 2006