Comparison of micelles formed by amphiphilic poly(ethylene glycol)‐b‐poly(trimethylene carbonate) star block copolymers

In this article, we describe the synthesis and solution properties of PEG‐b‐PTMC star block copolymers via ring‐opening polymerization (ROP) of trimethylene carbonate (TMC) monomer initiated at the hydroxyl end group of the core PEG using HCl Et₂O as a monomer activator. The ROP of TMC was performed to synthesize PEG‐b‐PTMC star block copolymers with one, two, four, and eight arms. The PEG‐b‐PTMC star block copolymers with same ratio of between hydrophobic PTMC and hydrophilic PEG segments were obtained in quantitative yield and exhibited monomodal GPC curves. The amphiphilic PEG‐b‐PTMC star block copolymers formed spherical micelles with a core–shell structure in an aqueous phase. The mean hydrodynamic diameters of the micelles increased from 17 to 194 nm with increasing arm number. As arm number increased, the critical micelle concentration (CMC) of the PEG‐b‐PTMC star block copolymers increased from 3.1 × 10^?3 to 21.1 × 10^?3 mg/mL but the partition equilibrium constant, which is an indicator of the hydrophobicity of the micelles of the PEG‐b‐PTMC star block copolymers in aqueous media, decreased from 4.44 × 10⁴ to 1.34 × 10⁴. In conclusion, we confirmed that the PEG‐b‐PTMC star block copolymers form micelles and, hence, may be potential hydrophobic drug delivery vehicles. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of amphiphilic temperature‐sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers and micellar characterization

Amphiphilic thermally sensitive poly(N‐isopropylacrylamide)‐block‐poly(tetramethylene carbonate) block copolymers were synthesized by ring‐opening polymerization of tetramethylene carbonate with hydroxyl‐terminated poly(N‐isopropylacrylamide) (PNiPAAm) as macro‐initiator in the presence of stannous octoate as catalyst. The synthesis involved PNiPAAm bearing a single terminal hydroxyl group prepared by telomerization using 2‐hydroxyethanethiol as a chain‐transfer agent. The copolymers were characterized using ¹H NMR and Fourier transform infrared spectroscopy and gel permeation chromatography. Their solutions show reversible changes in optical properties: transparent below the lower critical solution temperature (LCST) and opaque above the LCST. The LCST depends on the polymer composition and the media. Owing to their amphiphilic characteristics, the block copolymers form micelles in the aqueous phase with critical micelle concentrations (CMCs) in the range 1.11–22.9 mg L^?1. Increasing the hydrophobic segment length or decreasing the hydrophilic segment length in the amphiphilic diblock copolymers produces lower CMCs. A core‐shell structure of the micelles is evident from ¹H NMR analyses of the micelles in D₂O. Transmission electron microscopic analyses of micelle morphology show a spherical structure of both blank and drug‐loaded micelles. The blank and drug‐loaded micelles have an average size of less than 130 nm. Observations show high drug‐entrapment efficiency and drug‐loading content for the drug‐loaded micelles. Copyright © 2010 Society of Chemical Industry     

Synthesis and characterization of copolymers with the same proportions of polystyrene and poly(ethylene oxide) compositions but different connection sequence by the efficient Williamson reaction

The AB type diblock PS‐b‐PEO and ABA type triblock PS‐b‐PEO‐b‐PS copolymers containing the same proportions of polystyrene (PS) and poly(ethylene oxide) (PEO) but different connection sequence were synthesized and investigated. Using the sequential living anionic polymerization and ring‐opening polymerization mechanisms, diblock PS‐b‐PEO copolymers with one hydroxyl group at the PEO end were obtained. Then, using the classic and efficient Williamson reaction (realized in a ‘click’ style), triblock PS‐b‐PEO‐b‐PS copolymers were achieved by a coupling reaction between hydroxyl groups at the PEO end of PS‐b‐PEO. The PS‐b‐PEO and PS‐b‐PEO‐b‐PS copolymers were well characterized by ¹H NMR spectra and SEC measurements. The critical micelle concentration (CMC) and thermal behaviors were also investigated by steady‐state fluorescence spectra and DSC, respectively. The results showed that, because the PEO segment in triblock PS‐b‐PEO‐b‐PS was more restricted than that in diblock PS‐b‐PEO copolymer, the former PS‐b‐PEO‐b‐PS copolymer always gave higher CMC values and lower crystallization temperature (T_c), melting temperature (T_m) and degree of crystallinity (X_c) parameters. © 2015 Society of Chemical Industry     

Crystallization behavior of biodegradable amphiphilic poly(ethylene glycol)‐poly(L‐lactide) block copolymers

Poly(ethylene glycol)‐poly(L ‐lactide) diblock and triblock copolymers were prepared by ring‐opening polymerization of L ‐lactide with poly(ethylene glycol) methyl ether or with poly(ethylene glycol) in the presence of stannous octoate. Molecular weight, thermal properties, and crystalline structure of block copolymers were analyzed by ¹H‐NMR, FTIR, GPC, DSC, and wide‐angle X‐ray diffraction (WAXD). The composition of the block copolymer was found to be comparable to those of the reactants. Each block of the PEG–PLLA copolymer was phase separated at room temperature, as determined by DSC and WAXD. For the asymmetric block copolymers, the crystallization of one block influenced much the crystalline structure of the other block that was chemically connected to it. Time‐resolved WAXD analyses also showed the crystallization of the PLLA block became retarded due to the presence of the PEG block. According to the biodegradability test using the activated sludge, PEG–PLLA block copolymer degraded much faster than PLLA homopolymers of the same molecular weight. © 1999 John Wiley amp; Sons, Inc. J Appl Polym Sci 72: 341–348, 1999     

pH响应型mPEG-PCL嵌段共聚物胶束用作药物运输

该文合成了一种具有pH敏感性,较低毒性的两亲性嵌段共聚物以用于药物运输。聚乙二醇-聚己内酯(mPEG-PCL)是以聚乙二醇单甲醚为引发剂,开环己内酯聚合而成,阿霉素则是通过顺乌头酸裂解键连在聚己内酯的末端。该嵌段聚合物通过核磁共振、红外光谱等进行表征。共轭阿霉素后的嵌段聚合物在水溶液中能够自组装形成胶束,胶束粒径约为45.4 nm,透射电镜显示胶束具有近似的球形结构。阿霉素在pH=4.0下的释放速率明显快于pH=7.4下的释放速率。mPEG-PCL在细胞培养中无细胞毒性,包载阿霉素的胶束在人类MCF-7乳腺癌细胞上表现出迟缓的细胞毒性。通过共聚焦显微镜观察游离阿霉素和mPEG-PCL-DOX胶束在MCF-7细胞内的定位说明载体能够携带阿霉素进入细胞。     

Influence of racemization on stereocomplex‐induced gelation of water‐soluble polylactide–poly(ethylene glycol) block copolymers

Ring‐opening polymerization of L ‐ or D ‐lactide was realized at 140 °C for a period of 7 days in the presence of dihydroxyl poly(ethylene glycol) (PEG), with M?_n = 4000 g mol^?1, using zinc lactate as initiator. The resulting poly(L ‐lactide)–PEG–poly(L ‐lactide) and poly(D ‐lactide)–PEG–poly(D ‐lactide) triblock copolymers are water soluble with polylactide (PLA) block length ranging from 11 to 17 units. Both the tube inverting method and rheological measurements were used to evaluate the gelation properties of aqueous solutions containing single copolymers or L /D copolymer pairs. Stereocomplexation between poly(L ‐lactide) and poly(D ‐lactide) blocks is observed for mixed solutions. Hydrogel formation is detected in the case of relatively long PLA blocks (DP _PLA = 17), but not for copolymers with shorter PLA blocks (DP _PLA = 11–13) due to partial racemization of L ‐lactyl units. Racemization is largely reduced when the reaction time is shortened to 1 day. Under these conditions, DP _PLA of 8 is sufficient for the stereocomplexation of PLA–PEG block copolymers, and DP _PLA above 10 leads to the formation of hydrogels of PLA–PEG block copolymers. On the other hand, racemization appears as a general phenomenon in the (co)polymerization of L ‐lactide with Zn(Lac)₂ as initiator, although it is negligible or undetectable in the case of high molar mass polymers. Therefore, racemization is the limiting factor for the stereocomplexation‐induced gelation of water‐soluble PLA–PEG block copolymers where the PLA block length generally ranges from 10 to 30. Reaction conditions including initiator, time and temperature should be strictly controlled to minimize racemization. Copyright © 2010 Society of Chemical Industry     

Synthesis and Characterization of GAP-PEG Copolymers

ABSTRACT

A series of glycidylazide–poly(ethylene glycol) (GAP-PEG) copolymers were synthesized by cationic ring-opening polymerization of epichlorohydrin (ECH) in the presence of poly(ethylene glycol) (PEG) using borontrifluoride etherate (BF₃-etherate) as catalyst, followed by the conversion of the CH₂Cl groups of poly(epichlorohydrin) (PECH) to CH₂N₃ groups. The formation of PECH-b-PEG-b-PECH triblock copolymers was confirmed by IR, ¹H NMR, and ¹³C NMR spectroscopy. The corresponding GAP-b-PEG-b-GAP triblock copolymers were characterized by UV, IR, ¹H NMR, and ¹³C NMR spectroscopy. The copolymers have shown an increment in their molecular weights as the higher analogue molecular weight PEGs were used in the polymerizations. The thermogravimetry-differential thermogravimetry (TG-DTG) and differential scanning calorimetry (DSC) studies of the GAP triblock copolymers indicate an increase in the decomposition temperature of the azide groups of GAP block in the copolymers caused by the introduction of higher molecular weight PEG blocks. GAP-PEG copolymers have shown lower glass transition temperatures than the homo glycidylazide polymer. The nitrogen content of the GAP-PEG copolymers was estimated by various methods and the value was in good agreement with the estimated values.     

Phase behavior of aqueous systems containing block copolymers of poly(ethylene oxide) and poly(propylene oxide)

Phase behavior of aqueous systems containing block copolymers of poly(ethylene oxide (PEO) and poly(propylene oxide) (PPO) was evaluated by building up temperature-concentration phase diagrams. We have studied bifunctional triblock copolymers (HO-PEO-PPO-PEO-OH) and monofunctional diblock copolymers (R-PEO-PPO-OH and R-PPO-PEO-OH, where R length is linear C₄ and C_12–14). The cloud points of the polymer solutions depended on EO/PO ratio, polarity, R length and position of the hydrophilic and hydrophobic segments along the molecule. Such factors influence on the solutions behavior was also analyzed in terms of critical micelle concentration (CMC), which was obtained from surface tension vs. concentration plots. Salts (NaCl and KCl) added into the polymer solutions change the solvent polarity decreasing the cloud points. On the other hand, the cloud points of the polymer solutions increased as a hydrotrope (sodium p-toluenesulfonate) was added. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 1767–1772, 1997     

Synthesis, isothermal crystallization and micellization of mPEG-PCL diblock copolymers catalyzed by yttrium complex

Amphiphilic biodegradable mPEG-PCL diblock copolymers have been synthesized using rare earth catalyst: yttrium tris(2,6-di-tert-butyl-4-methylphenolate) [Y(DBMP)₃] in the presence of monomethoxy poly(ethylene glycol) (mPEG, M_n = 5000) as macro-initiator. The diblock architecture of the copolymers was thoroughly characterized by ¹H NMR, ¹³C NMR and SEC. The molecular weights of mPEG-PCLs can be well controlled by adjusting the feeding molar ratio of ?-CL to mPEG. Thermal and crystallization behaviors of the diblock copolymers were investigated by DSC and POM (polarized optical microscope). The crystallization property of mPEG-PCL block copolymers depends on the length of PCL blocks. As the molecular weight of PCL block increased, the crystallization ability of mPEG block was visibly restrained. Aqueous micelles were prepared by dialysis method. The critical micelle concentration of the copolymers, which was determined to be 0.9-6.9 mg/L by fluorescence technique, increased with the decreasing of PCL block length. The particle sizes determined by DLS were 30-80 nm increasing with the PCL block length. TEM images showed that these micelles were regularly spherical in shape.     

ABA triblock copolymers from poly(p‐dioxanone) and poly(ethylene glycol)

Poly(p‐dioxanone)–poly(ethylene glycol)–poly(p‐dioxanone) ABA triblock copolymers (PEDO) were synthesized by ring‐opening polymerization from p‐dioxanone using poly(ethylene glycol) (PEG) with different molecular weights as macroinitiators in N₂ atmosphere. The copolymer was characterized by ¹H NMR spectroscope. The thermal behavior, crystallization, and thermal stability of these copolymers were investigated by differential scanning calorimetry and thermogravimetric measurements. The water absorption of these copolymers was also measured. The results indicated that the content and length of PEG chain have a greater effect on the properties of copolymers. This kind of biodegradable copolymer will find a potential application in biomedical materials. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:1092–1097, 2006     

Thermoresponsive poly(ϵ‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) graft copolymers prepared by a combination of ring‐opening polymerization and sequential azide–alkyne click chemistry

A straightforward strategy is described to synthesize poly(?‐caprolactone)‐graft‐poly(N‐isopropylacrylamide) (PCL‐g‐PNIPAAm) amphiphilic graft copolymers consisting of potentially biodegradable polyester backbones and thermoresponsive grafting chains. PCL with pendent chlorides was prepared by ring‐opening polymerization, followed by conversion of the pendent chlorides to azides. Alkyne‐terminated PNIPAAm was synthesized by atom transfer radial polymerization. Then, the alkyne end‐functionalized PNIPAAm was grafted onto the PCL backbone by a copper‐catalyzed azide–alkyne cycloaddition. PCL‐g‐PNIPAAm graft copolymers self‐assembled into spherical micelles comprised of PCL cores and PNIPAAm coronas. The critical micelle concentrations of the graft copolymers were in the range 7.8–18.2 mg L^?1, depending on copolymer composition. Mean hydrodynamic diameters of micelles were in the range 65–135 nm, which increased as the length of grafting chains grew. PCL‐g‐PNIPAAm micelles were thermosensitive and aggregated upon heating. © 2014 Society of Chemical Industry     

Study of novel biodegradable thermo‐sensitive hydrogels of methoxy‐poly(ethylene glycol)‐block‐polyester diblock copolymers

A series of biodegradable thermo‐sensitive hydrogels were synthesized by ring‐opening polymerization of methoxy‐poly(ethylene glycol) (mPEG) and various ester monomers, i.e. D ,L ‐lactide, glycolide, β‐propiolactone, δ‐valerolactone and ε‐caprolactone. The copolymers were characterized using ¹H NMR spectroscopy and gel permeation chromatography. The micelle properties were also measured. The results indicated that the diblock copolymers formed nano‐micelles at low concentrations in aqueous phase. The lower critical solution temperatures of the diblock copolymers were above 35 °C at 1 wt%. As the temperature increased above room temperature, the diblock copolymer solutions underwent a sol‐to‐gel phase transition, which was manifested in viscosity increases, indicative of the formation of a gel. The mPEG–polyester diblock copolymer solutions exhibited sol‐gel transition behavior as a function of temperature and polymer concentration. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

AB‐ and ABC‐type di‐ and triblock copolymers of poly[styrene‐block‐(ε‐caprolactone)] and poly[styrene‐block‐(ε‐caprolactone)‐block‐lactide]: synthesis,characterization and thermal studies

Polystyrene terminated with benzyl alcohol units was employed as a macroinitiator for ring‐opening polymerization of ε‐caprolactone and L ‐lactide to yield AB‐ and ABC‐type block copolymers. Even though there are many reports on the diblock copolymers of poly(styrene‐block‐lactide) and poly(styrene‐block‐lactone), this is the first report on the poly(styrene‐block‐lactone‐block‐lactide) triblock copolymer consisting of two semicrystalline and degradable segments. The triblock copolymers exhibited twin melting behavior in differential scanning calorimetry (DSC) analysis with thermal transitions corresponding to each of the lactone and lactide blocks. The block derived from ε‐caprolactone also showed crystallization transitions upon cooling from the melt. In the DSC analysis, one of the triblock copolymers showed an exothermic transition well above the melting temperature upon cooling. Thermogravimetric analysis of these block copolymers showed a two‐step degradation curve for the diblock copolymer and a three‐step degradation for the triblock copolymer with each of the degradation steps associated with each segment of the block copolymers. The present study shows that it is possible to make pure triblock copolymers with two semicrystalline segments which also consist of degradable blocks. Copyright © 2009 Society of Chemical Industry     

Synthesis and characterization of star‐shaped poly(ethylene glycol)‐block‐poly(L‐lactic acid) copolymers by melt polycondensation

Compared with linear diblock or triblock poly(ethylene glycol)‐block‐poly(L ‐lactic acid) copolymer (PEG‐b‐PLLA), star‐shaped PEG‐b‐PLLA (sPEG‐b‐PLLA) copolymers exhibit smaller hydrodynamic radius and lower viscosity and are expected to display peculiar morphologies, thermal properties, and degradation profiles. Compared with the synthesis routine of PEG‐b‐PLLA form lactide and PEG, the traditional synthesis routine from LA and PEG were suffered by the low reaction efficiency, low purity, lower molecular weight, and wide molecular weight distribution. In this article, multiarm sPEG‐b‐PLLA copolymer was prepared from multiarm sPEG and L ‐lactic acid (LLA using an improved method of melt polycondensation, in which two types of sPEG, that is, sPEG₁ (four arm, Mn = 4300) and sPEG₂ (three arm, Mn = 3200) were chosen as the core. It was found the molecular weight of sPEG‐b‐PLLA could be strongly affected by the purity of LLA and sPEGs, and the purification technology of vacuum dewater and vacuum distillation could help to remove most of the impurities in commercial available LLA. The polymers, including sPEG and sPEG‐b‐PLLA with varied core (sPEG₁ and sPEG₂) and LLA/sPEG feeding ratios, were characterized and confirmed by ¹H‐NMR and ¹³C‐NMR spectroscopy, Fourier transform infrared spectroscopy (FT‐IR) and gel permeation chromatography, which showed that the terminal hydroxyl group in each arm of sPEGs had reacted with LLA to form sPEG‐b‐PLLA copolymers with fairly narrow molecular weight distribution. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

CMC and dynamic properties of poly(VA-<Emphasis Type="Italic">b</Emphasis>-St) copolymer micelles for drug delivery

The polymeric micelles from amphiphilic block copolymer poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) with different syndiotacticity of poly(vinyl alcohol) (PVA) block were prepared by dialysis against water. Critical micelle concentration (CMC) and dynamic properties of poly(VA-b-St) copolymeric micelles were investigated by fluorescence techniques. From the fluorescence emission spectrum measurements using pyrene as a fluorescence probe, the observed CMC value was in the range of 0.125–4.47 mg/L. The CMC value increased with decreasing the weight ratio of PS to PVA block and with increasing the syndiotacticity of PVA block. The rate of pyrene release was very slow for block copolymers containing PVA block with higher syndiotacticity, which indicates that their micelles have increased kinetic stability. This work was presented at 13 ^th YABEC symposium held at Seoul, Korea, October 20–22, 2007.     

A new synthetic approach to asymmetric amphiphilic ABA′ block copolymers by ATRP and click reactions

Well‐defined asymmetric amphiphilic ABA′ block copolymers composed of poly(ethylene oxide) monomethylene ether (MPEO) with different molecular weights as A or A′ block and poly(styrene) (PS) as B block were synthesized by the combination of atom transfer radical polymerization (ATRP) and click reactions. First, bromine‐terminated diblock copolymer poly(ethylene oxide) monomethylene ether‐block‐poly(styrene) (MPEO‐PS‐Br) was prepared by ATRP of styrene initiated with macroinitiator MPEO‐Br, which was prepared from the esterification of MPEO and 2‐bromoisobutyryl bromide. Then, the azido‐terminated diblock copolymers MPEO‐PS‐N₃ were prepared through the bromine substitution reaction with sodium azide. Propargyl‐terminated MPEO with a different molecular weight was prepared under the basic condition from propargyl alcohol and p‐toluenesulfonyl‐terminated MPEO, which was prepared through the esterification of MPEO and p‐toluenesulfochloride using pyridine as solvent. Asymmetric amphiphilic ABA′ block copolymers, with a wide range of number–average molecular weights from 1.92 × 10⁴ to 2.47 × 10⁴ and a narrow polydispersity from 1.03 to 1.05, were synthesized via a click reaction of the azido‐terminated diblock copolymers and the propargyl‐terminated MPEO in the presence of CuBr and 1,1,4,7,7‐pentamethyldiethylenetriamine (PMDETA) catalyst system. The structures of these ABA′ block copolymers and corresponding precursors were characterized by NMR, IR, and GPC. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of dual stimuli-responsive block copolymers based on poly(N-isopropylacrylamide)-b-poly(pseudoamino acid)

The current study synthesized amphiphilic thermal/pH-sensitive block copolymers PNiPAAm-b-PHpr by condensation polymerization of trans-4-hydroxy-l-proline (Hpr) initiated from hydroxy-terminated poly(N-isopropylacrylamide) (PNiPAAm) as the macroinitiator in the presence of the catalyst, SnOct₂. ¹H NMR, FTIR, and gel permeation chromatography (GPC) characterized these copolymers. Their solutions showed reversible changes in optical properties: transparent below a lower critical solution temperature (LCST) and opaque above the LCST. The LCST values depended on the polymer composition and the media. With critical micelle concentrations (CMCs) in the range of 1.23-3.73 mg L⁻¹, the block copolymers formed micelles in the aqueous phase owing to their amphiphilic characteristics. Increased hydrophobic segment length or decreased hydrophilic segment length in an amphiphilic diblock copolymer produced lower CMC values. The current work proved the core-shell structure of micelles by ¹H NMR analyses of the micelles in D₂O. Transmission electron microscopy analyzed micelle morphology, showing a spherical core-shell structure. The micelles had an average size in the range of 170˜210 nm (blank), and 195˜280 nm (with drug). Observations showed high drug entrapment efficiency and drug-loading content for the drug micelles.     

Synthesis and characterization of PEG–PCL–PEG triblock copolymers as carriers of doxorubicin for the treatment of breast cancer

Triblock copolymers of monomethoxy poly(ethylene glycol) (mPEG) and ε‐caprolactone (CL) were prepared with varying lengths of poly(ε‐caprolactone) (PCL) compositions and a fixed length of mPEG segment. The molecular characteristics of triblock copolymers were characterized by ¹H NMR, gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), and differential scanning calorimetry (DSC). These amphiphilic linear copolymers based on PCL hydrophobic chain and hydrophilic mPEG ending, which can self‐assemble into nanoscopic micelles with their hydrophobic cores, encapsulated doxorubicin (DOX) in an aqueous solution. The particle size of prepared micelles was around 40–92 nm. The DOX loading content and DOX loading efficiency were from 3.7–7.4% to 26–49%, respectively. DOX‐released profile was pH‐dependent and faster at pH 5.4 than pH 7.4. Additionally, the cytotoxicity of DOX‐loaded micelles was found to be similar with free DOX in drug‐resistant cells (MCF‐7/adr). The great amounts of DOX and fast uptake accumulated into the MCF‐7/adr cells from DOX‐loaded micelles suggest a potential application in cancer chemotherapy. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

“Reservoir” and “barrier” effects of ABC block copolymer micelle in hydroxyapatite mineralization control

An amphiphilic triblock poly (ethylene glycol)-block-poly (acrylate acid)-block-poly (ε-caprolactone) (PEG-PAA-PCL) copolymer was synthesized by sequential anionic polymerization. By comparing with diblock copolymer poly (acrylic acid)-block-poly (ε-caprolactone) (PAA-PCL), the triblock copolymer (PEG-PAA-PCL) micelle has core-shell-corona structure, which possesses better dispersion, could be a good candidate as structure template for the controlled mineralization of hydroxyapatite (HA). The interactions between inorganic ions and polymers were studied by using Ca²⁺ ion selective electrode and zeta potential, which indicated the “reservoir” effect of micelles and the “barrier” effect of PEG segments during mineralization process. Ca²⁺ ions can penetrate through the corona and interact with PAA segments. When PO₄³⁻ ions were added, Ca²⁺ ions diffuse out, and react with PO₄³⁻ ions to form the new apatite layer. Thus the supersaturation could be well tuned by the triblock copolymer micelles, and the nucleation and crystal growth in nano scale could be controlled by appropriate usage of this template system.