Synthesis,Characterization and Ion–Exchanging Properties of Novel Ion-Exchange Resin,Part 1

A polyamine (PA) was prepared by condensation of 1,4-bischloromethyl benzene and 1,2-ehanedeamine. The PA was then treated with cyanuric chloride at 0°C followed by reaction with sulfanilic acid in THF in concentration. NaOH (PH 9–10) at room temperature for 8 h. The resultant polymer, designated as polyamine-s-triazine-sulfanilic acid (PATS), was characterized by elemental analysis, IR spectral studies, and thermogravimetry. The PATS sample was monitored for its ion-exchanging properties by batch equilibrium method.     

Synthesis,Characterization and Material Application of Novel Polyimide

Novel polyimide-II containing 8-hydroxyquinoline as pendent groups was prepared by reacting N,N′-(1,1′-biphenyl)-4,4′-diyl bismaleimide--diamine polyimide-I (BPBMDDM) with 5-chloromethyl-8-hydroxyquinoline hydrochloride (CMHQ) in the presence of base catalyst. N,N′-(1,1′-biphenyl)-4,4′-diyl bismaleimide--diamine polyimide-I (BPBMDDM) was prepared by Michael addition reaction of N,N′-(1,1′-biphenyl)-4,4′-diyl bismaleimide (BPBM) with 4,4′-diaminodiphenyl methane (DDM). The resulting polyimide-II (BPBMDDMCMHQ) was characterized by spectral techniques. Polymeric metal chelates of polyimide-II were prepared using the transition metal ions Zn(II), Cu(II), Ni(II), Co(II), and Mn(II), and were characterized. Ion-exchange properties of polyimide-II (BPBMDDMCMHQ) for Fe(III), Zn(II), Ni(II) and Cu(II) metal ions were also studied by batch-equilibration method. The polyimide-II (BPBMDDMCMHQ) has good metal uptake capacity at varying pH range and can be recycled. It has thermal stability up to 240°C.     

Synthesis,Characterization, and Applications of a New Ion Exchanger Tamarind 4-aminobenzoic Acid (TABA) Resin in Industrial Wastewater Treatment

Chromatographic column separations of toxic metal ions from industrial wastewater were achieved in acid media at optimized (K_d) values with a synthesized cation exchange TABA resin. The prepared TABA resin was characterized by FTIR, elemental, and thermogravimetric analysis. Studies of total ion exchange capacity, resin durability, and swelling were carried out. The distribution coefficient values of metal ions, viz Cu²⁺, Fe²⁺, Zn²⁺, Cd²⁺ and Pb²⁺ at different pH, were also studied using a batch equilibration method. The different factors affecting metal ions adsorption on this substrate, such as treatment time, agitation speed, and temperature, were studied in detail.     

Synthesis,Characterization and Glass-Reinforced Composites of Poly(Ether-imide)s Based on Epoxy Resin: II

Abstract

Novel poly(ether-imide)s were prepared by Diels-Alder (DA) reaction of 1,1′-(1-methylethylidene)bis[4-{1-(2-furanyl-methoxy)-2-propanoloxy}] benzene with various bismaleimides. The DA reaction was carried out in solution using tetrahydrofuran (THF) as solvent, as well as in bulk. The post polymerization, involving aromatization of tetrahydrophthalimide intermediates was accomplished in the presence of acetic anhydride. All the poly(ether-imide)s were characterized by elemental analyses, infrared spectrometry and thermogravimetry. The glass reinforced composites of produced PEIs have also been prepared and characterized.     

一种新型环氧树脂潜伏性固化剂二苯基双胍的合成与性能

设计并合成了一种环氧树脂潜伏性固化剂二苯基双胍。采用FTIR和1HNMR表征了固化剂的化学结构,并通过DSC分析得到环氧树脂与固化剂的最佳质量配比为5∶1,固化活性实验及凝胶实验分析得到最佳固化温度为130℃,储存期为室温下30 d,拉伸实验分析了固化物的抗拉强度可达38.07 MPa,采用TG测试得到固化物的热分解温度超过270℃。结果表明,与双氰胺环氧树脂固化体系相比,该固化剂和环氧树脂有更好的相容性,潜伏性良好,其固化温度降低30℃以上,固化物有更优异的力学性能和良好的热稳定性。     

Synthesis and Properties of a Novel Flame-Retardant Epoxy Resin Containing Biphenylyl/Phenyl Phosphonic Moieties

A novel reactive diol, bis-biphenyloxy (4-hydroxy) phenyl phosphine oxide (BBPHPPO) which contains both biphenylyl and phenyl phosphonic groups was synthesized. Flame retardant advanced epoxy resin was obtained by chain extension of diglycidyl ether of bisphenol-A (DGEBA) with the phosphorus-containing diol (BBPHPPO). The thermal properties and flame retardancy of cured epoxy resin were studied. The resulting BBPHPPO containing epoxy system exhibited higher glass transition temperature than that of advanced epoxy resins prepared from bisphenol-A (BA) and tetrabromobisphenol-A (TBBA). The high char yield and the high LOI value were observed to prove the excellent flame retardancy of this phosphorus-containing epoxy resin.     

两种新型2-偕二硝甲基-5-硝基四唑含能离子盐的合成、表征及性能预估

以氨基-1,2,4-三唑和2-偕二硝甲基-5-硝基四唑(HDNMNT)为原料,通过中和反应合成出两种新型含能离子盐——2-偕二硝甲基-5-硝基四唑3-氨基-1,2,4-三唑盐(3-ATDNMNT)和2-偕二硝甲基-5-硝基四唑4-氨基-1,2,4-三唑盐(4-ATDNMNT),收率分别为95.4%和96.7%;利用FT-IR、1 H NMR、13C NMR、15 N NMR及元素分析等方法对其结构进行表征;采用量子化学方法计算了3-ATDNMNT和4-ATDNMNT的爆轰性能;在标准状态下(膨胀比为70∶1),利用最小自由能原理,分别计算了两种离子盐在丁羟复合推进剂中的能量性能。结果表明,3-ATDNMNT的爆速和爆压分别为8.587km/s和33.58GPa,4-ATDNMNT的爆速和爆压分别为8.693km/s和34.31GPa。以3-ATDNMNT部分取代丁羟复合推进剂中的AP后,丁羟复合推进剂的理论比冲可达2 635.7N·s/kg。以4-ATDNMNT部分取代丁羟复合推进剂中的AP后,当HTPB、Al、AP及4-ATDNMNT各组分质量分数分别为10%、5%、15%及70%时,获得该丁羟复合推进剂的最高理论比冲为2 677.2N·s/kg。     

对甲苯基双胍盐酸盐的合成及性能研究

以对甲苯胺为原料对双氰胺进行改性,合成了一种新型的改性双氰胺固化剂——对甲基苯基双胍盐酸盐。利用DSC方法考察了产物固化环氧树脂E-44体系的固化性能,结果表明,作为环氧树脂固化剂单独使用时,固化温度比双氰胺体系(180℃)降低了近60℃。确定固化工艺为80℃/2 h 100℃/1 h。     

Synthesis,Characterization and Aqueous Properties of a New Hybrid Fluorocarbon Cationic Surfmer

A novel hybrid fluorocarbon cationic surfmer has been synthesized and its aggregation and surface properties have been studied by surface tension, electrical conductivity, steady‐state fluorescence, Rayleigh light scattering, dynamic light scattering and transmission electron microscopy. Through surface tension, electrical conductivity, steady‐state fluorescence and Rayleigh light scattering measurements, the effectiveness of surface tension reduction, the maximum surface excess concentration, the minimum area occupied per surfactant molecule at the air/water interface, the micropolarity and aggregation number of micelles were investigated. The results shows that the surfmer has superior surface activity and lower micropolarity than other surfmers. The critical micelle concentration at different temperatures and a series of thermodynamic parameters (, , and , , , and ) of micellization were evaluated. The thermodynamic parameters showed that the micelle formation was entropy‐driven in the temperature range of 15–40 °C. The size and morphology of the aggregates were also confirmed by dynamic light scattering and transmission electron microscopy.     

Synthesis,Characterization, and Biodistribution of a Dinuclear Gadolinium Complex with Improved Properties as a Blood Pool MRI Agent

A dinuclear gadolinium(III) chelate containing two moieties of diethylenetriaminepentaacetic acid (DTPA), covalently conjugated to an analogue of deoxycholic acid, was synthesized and thoroughly characterized. A full relaxometric analysis was carried out, consisting of 1) the acquisition of nuclear magnetic resonance dispersion (NMRD) profiles in various media; 2) the study of binding affinity to serum albumin; 3) the measurement of ¹⁷O transverse relaxation rate versus temperature, and 4) a transmetallation assay. In vivo biodistribution MRI studies at 1 T and blood pharmacokinetics assays were carried out in comparison with Gd‐DTPA (Magnevist) and gadocoletic acid trisodium salt (B22956/1), two well‐known Gd complexes that share the same chelating cage and the same deoxycholic acid residue of the Gd complex investigated herein ((GdDTPA)₂‐Chol). High affinity for plasma protein and, in particular, the availability of more than one binding site, allows the complex to reach a fairly high relaxivity value in plasma (～20 mm ^?1 s^?1, 20 MHz, 310 K) as well as to show unexpectedly enhanced properties of blood pooling, with an elimination half‐life in rats approximately seven times longer than that of B22956/1.     

Synthesis,Characterization and Properties of Novel Poly(urethane‐imide) Networks as Electrical Insulators with Improved Thermal Stability

Summary: A new series of thermoplastic poly(urethane‐imide)s (TPUI1‐4) containing hydroxyl groups in the backbone was synthesized from the reaction of epoxy‐terminated polyurethane prepolymers (EPU1‐4) and an imide containing diacid (DIDA) chain extender under optimized reaction conditions. EPU1‐4 was prepared through end‐functionalization of NCO‐terminated polyurethanes based on polyester polyol (CAPA) and hexamethylene diisocyanate with glycidol. A blocked isocyanate (BIC) was made from the reaction of trimethylol propane (TMP), toluene diisocyanate (TDI) and N‐methylaniline (NMA). Polymer networks were prepared from the reaction of librated isocyanate groups of BIC with hydroxyl groups of TPUIs. The starting materials and polymers were characterized by conventional spectroscopic methods and the physical, thermal and electrical properties of crosslinked networks were studied. Investigation of the recorded properties for these samples showed considerable improvement in thermal and electrical properties in comparison to common polyurethanes.

Synthetic route for preparation of TPUIs.     

Synthesis,Characterization, and Applications of a New Chelating Resin Containing 4-2-(Thiazolylazo) Resorcinol (TAR)

A new phenol–formaldehyde based chelating resin containing 4-(2-thiazolylazo) resorcinol (TAR) functional groups has been synthesized and characterized by Fourier transform infrared spectroscopy and elemental analysis. Its adsorption behavior for Cu(II), Pb(II), Ni(II), Co(II), Cd(II), and Mn(II) has been investigated by batch and column experiments. The chelating resin is highly selective for Cu(II) in the pH range 2 ～ 3, whereas alkali metal and alkaline earth metal ions such as Na(I), Mg(II), and Ca(II) are not adsorbed even at pH 6. Quantitative recovery of most metal ions studied in this work except Co(II) is achieved by elution with 2M HNO₃ at a flow rate of 0.2 mL min^?1. A similar trend is observed for distribution coefficient values. The quantitative separations achieved on a mini-column of chelating resin include Cd(II) – Cu(II), Mn(II) – Pb(II), Co(II) – Cu(II), Mn(II) – Ni(II), and Mn(II) – Co(II) – Cu(II). The recovery of copper(II) is quantitative (98.0–99.0%) from test solutions (10–50 mg/L) by 1 mol/L HNO₃-0.01 mol/L EDTA. The chelating resin is stable in acidic solutions below 2.5 M HNO₃ or HCl as well as in alkaline solution below pH 11. The adsorption behavior of the resin towards Cu(II) was found to follow Langmuir isotherm and second order rate.     

Synthesis, Characterization, and Some Properties of 4-Vinylpyridine-Cr(CO)5 Containing Polymers

The polymerization of 4-vinylpyridine (4VP) and 4-vinylpyridine chromium pentacarbonyl [(4VP)Cr(CO)₅] was performed under N₂ atmosphere at 60–80°C temperature range. Different percent of feed (%PF) of Cr(CO)₅ groups were anchored into poly(4-vinylpyridine) (P4VP) by addition of the intermediate Cr(CO)₅THF, which was generated photochemically from Cr(CO)₆ in THF, to the polymer at ambient temperature. The determined percent of anchoring (%PA) has shown that the maximum anchored Cr(CO)₅ groups was 40% (w/w) with respect to P4VP, and the optimum percent of anchoring was 20% (w/w). The rate of polymerization (R _p ) and the activation energy (E _a ) of 4VP in the absence and in the presence of 16.7% Cr(CO)₅(4VP) were determined. Thermal analysis has shown various changes in the properties of the 4VP polymers after modification of the polymer by Cr(CO)₅ groups. The X-ray diffraction and the melting enthalpy derived from the DSC thermogram revealed that the synthesized poly[(CO)₅Cr(4VP)] has a crystallinity of about 40%, whereas no crystallinity was observed for pure P4VP.     

含有蒽酰亚胺的铜(I)配合物的合成、结构及光谱研究

合成了两个含蒽酰亚胺基团的新配体N-(2-(6-氨基吡啶))-9-蒽酰亚胺(L1)和N,N′-(2,6-吡啶基)-二(9-蒽酰亚胺)(L2),以及L1的铜(I)配合物[CuL1(PPh3)2](BF4)(1),并研究了它们的结构和光谱性质.理论计算表明配体L1配位前为反式构象,配合物1的晶体结构显示L1配位后发生结构扭曲呈顺式构象,羰基氧原子与铜(I)离子配位.光谱研究表明配体L1和配合物1都表现出蒽的特征吸收和发射峰.