Preparation and Characterization of Iron Oxides – Polymer Composite Membranes

Composite membranes of poly(2,6-dimethyl-1,4-phenylene oxide) (PPO) or ethyl cellulose filled with magnetic nanoparticles, that is, ferroferric oxides (Fe₃O₄) were prepared. These membranes were examined for nitrogen and oxygen permeability. In the case of ethylcellulose membranes the gas flow was too high, since the macropore were formed. In further permeation measurements PPO membranes with 1 to 10 w/w% magnetic particles content were investigated. For the higher concentration of magnetite (more than 20%) in PPO polymer solution sedimentation phenomenon was observed. Mass transport coefficients (permeation and selectivity) were evaluated. Selectivity of the investigated membranes changed with the weight fraction of magnetic particles from oxygen (plain) towards nitrogen (2 and more w/w%).     

Functional acrylic acid as stabilizer for synthesis of smart hydrogel particles containing a magnetic Fe3O4 core

This paper reports a novel method to synthesize magnetic, stimuli-sensitive latex nanoparticles made with magnetite/poly(N-isopropylacrylamide-co-acrylic acid) (Fe₃O₄/P(NIPAAm-co-AAc)). To form a stabilized suspended core, iron oxide (Fe₃O₄) was functionalized with AAc such that further polymerization with NIPAAm and AAc monomers could occur. The P(NIPAAm-co-AAc) shell layer exhibited thermosensitive properties. The inclusion of Fe₃O₄ into the latex nanoparticles was confirmed using transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction spectroscopy, thermogravimetric analyzer (TGA), and superconducting quantum interference device magnetometer. The NIP–(AAc2.6–Fe) latex nanoparticles contained 2.25% Fe₃O₄ (by weight), as determined by TGA analysis. The particle diameters measured approximately 160–240 nm with a lower critical solution temperature of 35 °C. These novel magnetic stimuli-responsive latex nanoparticles have potential applications in numerous fields, such as catalyst supports, protein immobilization, cancer therapy, target drug delivery systems, and other biomedical applications.     

Synthesis of magnetic mesoporous silica composites via a modified Stöber approach

In this work, magnetic Fe₃O₄@mesoporous silica composites were synthesized by a microemulsion (oil-in-water/ethanol) approach which was applied with a modified Stöber reaction. Cetyl trimethyl ammonium bromide was employed as the surfactant, nano-Fe₃O₄ particles were dispersed in microemulsion. Tetraethyl orthosilicate (TEOS) formed oil drops, and ammonia solution facilitated the hydrolysis polymerization of TEOS. The diameters of the magnetic Fe₃O₄@mesoporous silica composites can be tuned within the range 120–380 nm by varying the ratio of ethanol/water and the amount of nano-Fe₃O₄ particles. Brunauer–Emmett–Teller surface areas of magnetic Fe₃O₄@mesoporous silica composites were determined to be within the range 490–759 m²/g and their pore sizes were around 2.3 nm as it was determined by Barrett–Joyner–Halenda method. Furthermore, the encapsulation of poorly water-soluble drugs within magnetic Fe₃O₄@mesoporous silica composites was investigated using protoporphyrin IX. Magnetic Fe₃O₄@mesoporous silica composites showed a drug loading within 22–68 mg/g, which can be an excellent drug delivery platform for photodynamic therapy.     

New Trends in Nanoparticles: Syntheses and Their Applications to Fuel Cells,Health Care,and Magnetic Storage

This paper reviews important research on chemical and electrochemical synthesis and application of nanoparticles, especially our recent results in this field: (i) catalytic metal nanoparticles for micro-fuel cells, (ii) magnetic oxide nanoparticles for drug delivery systems, and (iii) magnetic metal nanoparticles for magnetic recording media. To fulfill the requirements of each application, we chose and modified those synthetic methods for obtaining suitable properties, e.g., morphology, catalytic activity, and magnetic properties. (i) For micro-fuel cells, electrodeposition is attractive because of its selective deposition onto current collectors and possible elimination of an annealing process. As a result, we have successfully synthesized Pt, PtRu alloy, and PdCo alloy, which consisted of dendritic structures macroscopically and of interconnected nanoparticles microscopically. (ii) For drug delivery systems, since magnetic nanoparticles should possess ferromagnetism, be dispersible in water, and be nontoxic, Fe₃O₄ nanoparticles synthesized by hydrolysis in aqueous media are suitable. As a result, we have successfully controlled the size (10–40 nm in diameter) and the magnetic properties of Fe₃O₄ nanoparticles by means of adjusting the molar ratio of ferrous to ferric ions in the precursor solution. (iii) For magnetic recording materials, since magnetic nanoparticles should possess high coercivity, a controlled shape, and a uniform small size, we have modified a chemical method for synthesizing FePt by adjusting the growth temperature. As a result, we have succeeded in synthesizing FePt nanoparticles with a controlled shape (cubic) and a uniform size (ca. 5.6 nm).     

Physical–chemical properties of xylan/PAAc magnetic semi‐interpenetrating network hydrogel

A novel magnetic semi‐IPN hydrogel based on xylan and poly(acrylic acid) was prepared, and the prepared hydrogels had excellent thermal stability, magnetic‐, and pH‐ sensitive properties. The physical‐chemical properties of the prepared hydrogels depended on the contents of xylan and Fe₃O₄ nanoparticles. The thermal stability of the hydrogels enhanced as the contents of xylan and Fe₃O₄ nanoparticles increased; however, the equilibrium swelling ratio decreased with increasing the contents of Fe₃O₄ nanoparticles and xylan. The interconnected pore channels were formed in the hydrogels and the amount of the channels increased with an increase in xylan content. The prepared hydrogels had a super‐paramagnetic property, and the magnetization increased with an increase in the content of Fe₃O₄ nanoparticles. The superior characteristics of the xylan/PAAc magnetic semi‐IPN hydrogel would expand its applications in drug delivery and magnetic separation aspects. POLYM. COMPOS., 36:2317–2325, 2015. © 2014 Society of Plastics Engineers     

Preparation and characterization of chitosan-poly(acrylic acid) polymer magnetic microspheres

A modified method to prepare chitosan-poly(acrylic acid)(CS-PAA) polymer magnetic microspheres was reported in this paper. First, via self-assembly of positively charged CS and negatively charged Fe₃O₄ nanoparticles, magnetic CS cores with a large amount of Fe₃O₄ nanoparticles were successfully prepared. Subsequently, the AA monomers were polymerized on the magetic CS cores based on the reaction system of water-soluble polymer-monomer pairs. These polymer magnetic microspheres had a high Fe₃O₄ loading content, and showed unique pH-dependent behaviors on the size and zeta potential. From the magnetometer measurements data, the CS-PAA polymer magnetic microspheres also had superparamagnetic property as well as fast magnetic response. A continuous release of the entrapped ammonium glycyrrhizinate in such polymer magnetic microspheres occurred, which confirmed the potential applications of these microspheres for the targeted delivery of drugs.     

Multifunctional liposomal drug delivery with dual probes of magnetic resonance and fluorescence imaging

Many liposomal drug carriers have shown great promise in the clinic. To ensure the efficient preclinical development of drug-loaded liposomes, the drug retention and circulation properties of these systems should be characterized. Iron oxide (Fe₃O₄) magnetic nanoparticles (MNPs) are used as T2 contrast agents in magnetic resonance imaging (MRI). Gold nanoclusters (GNCs) contain tens of atoms with subnanometer dimensions; they have very low cytotoxicity and possess superb red emitting fluorescent properties, which prevents in vivo background autofluorescence. The aim of this study was to develop dual imaging, nanocomposite, multifunctional liposome drug carriers (Fe₃O₄-GNCs) comprising MNPs of iron oxide and GNCs. First, MNPs of iron oxide were synthesized by co-precipitation. The MNP surfaces were modified with amine groups using 3-aminopropyltriethoxysilane (APTES). Second, GNCs were synthesized by reducing HAuCl₄·3H₂O with NaBH4 in the presence of lipoic acid (as a stabilizer and nanosynthetic template). The GNCs were grown by adsorption onto particles to control the size and stability of the resultant colloids. Subsequently, dual Fe₃O₄-GNCs imaging probes were fabricated by conjugating the iron oxide MNPs with the GNCs via amide bonds. Finally, liposome nanocarriers were used to enclose the Fe₃O₄-GNCs in an inner phase (liposome@Fe₃O₄-GNCs) by reverse phase evaporation. These nanocarriers were characterized by dynamic light scattering (DLS), fluorescence spectroscopy, X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectrophotometry, superconducting quantum interference device (SQUID), nuclear magnetic resonance (NMR) imaging and in vivo imaging systems (IVIS). These multifunctional liposomal drug delivery systems with dual probes are expected to prove useful in preclinical trials for cancer diagnosis and therapy.     

pH Responsive Behavior of Fe3O4@PDEA-PEGMA Core-Shell Hybrid Magnetic Nanoparticles

Fe₃O₄@PDEA-PEGMA core-shell magnetic nanoparticles were prepared via surface-initiated atom transfer radical polymerization (ATRP). First, an ATRP initiator was immobilized onto the surface of Fe₃O₄ magnetic nanoparticles, then poly[2-(diethylamino)ethyl methacrylate] (PDEA) and poly(poly[(ethylene glycol) monomethacrylate]) (PEGMA) were grafted from the surface of the magnetic nanoparticles in succession. Each step of the reactions gave distinctive thermogravimetric analysis curves. Polymer shells cleaved from Fe₃O₄ core were measured by gel permeation chromatography, while its molecular weight was found to increase with successive polymerization (with a polydispersity of approximately 1.3–1.4). The architecture of the core-shell nanoparticles was confirmed by transmission electron microscopy. The Fe₃O₄@PDEA-PEGMA hybrid magnetic nanoparticles formed stable dispersions in H₂O at low pH (pH < 6) and precipitated out at high pH (pH > 6). This pH transition behavior was also observed in dynamic light scattering experiments.     

Fe3O4@mesoporouspolyaniline: A Highly Efficient and Magnetically Separable Catalyst for Cross‐Coupling of Aryl Chlorides and Phenols

A high surface, magnetic Fe₃O₄@mesoporouspolyaniline core‐shell nanocomposite was synthesized from magnetic iron oxide (Fe₃O₄) nanoparticles and mesoporouspolyaniline (mPANI). The novel porous magnetic Fe₃O₄ was obtained by solvothermal method under sealed pressure reactor at high temperature to achieve high surface area. The mesoporouspolyaniline shell was synthesized by in situ surface polymerization onto porous magnetic Fe₃O₄ in the presence of polyvinylpyrrolidone (PVP) and sodium dodecylbenzenesulfonate (SDBS), as a linker and structure‐directing agent, through ‘blackberry nanostructures’ assembly. The material composition, stoichiometric ratio and reaction conditions play vital roles in the synthesis of these nanostructures as confirmed by variety of characterization techniques. The role of the mesoporouspolyaniline shell is to stabilize the porous magnetic Fe₃O₄ nanoparticles, and provide direct access to the core Fe₃O₄ nanoparticles. The catalytic activity of magnetic Fe₃O₄@mesoporousPANI nanocomposite was evaluated in the cross‐coupling of aryl chlorides and phenols.     

Synthesis of magnetic particles with well-defined living polymeric chains via combination of RAFT polymerization and thiol-ene click chemistry

Magnetic polymer particles have attracted large attention, due to their potential applications in biomedical field such as drug delivery, protein adsorption, magnetic resonance imaging and etc. A combinatorial method based on reversible addition fragmentation chain transfer (RAFT) polymerization and thiol-ene click chemistry was adopted to synthesize magnetic core-shell polymer hybrids. Well-defined poly (N-isopropylacrylamide) with trithiocarbonate moieties (PNIPAAm-CTA) was designed by RAFT polymerization and then was reduced to thiol-end polymers (PNIPAAm-SH). On the other hand, the magnetic particles (Fe₃O₄) were prepared by hydrothermal method, modified with silane coupling agent (KH-550) and acrylic acid to introduce vinyl group (?CH = CH₂) onto the inorganic surface. Then the Fe₃O₄-g-PNIPAAm particles were synthesized by using thiol-ene click chemistry. The chemical composition, surface morphology, core-shell structure were characterized by a series of techniques such as Fourier transform infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), dynamic light scattering (DLS) and vibrating sample magnetometer (VSM). The results showed that the as-synthesized composite iron oxide particles owned thermoresponsive behaviors and superparamagnetic properties. And, the superparamagnetic thermoresponsive particles with high magnetization might be potential ideal candidates for biomedical field.     

Construction of magnetic-targeted and NIR irradiation-controlled drug delivery platform with Fe3O4@Au@SiO2 nanospheres

Near-infrared (NIR) light has great potential in biomedical applications due to its advantages of deep penetration depth and low photodamage to biological tissues. In this paper, we constructed a novel core-shell structured drug nanocarrier, Fe₃O₄@Au@SiO₂, for the controlled delivery of etoposide (VP16), a chemotherapeutic drug for cancer patients. The novel core-shell structured drug delivery platform is composed of a mesoporous silica shell and a magnetic Fe₃O₄ core using Au nanoparticles (AuNPs) as the interlayer, which is characterized by atomic force microscopy (AFM), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, N₂ adsorption/desorption isotherms and the magnetic measurements with vibrating-sample magnetometer (VSM). The synergistic effects of AuNPs, mesoporous silica and Fe₃O₄ make the core-shell structured nanocomposites an excellent candidate for targeted and NIR light irradiation-controlled drug delivery. For the proposed nanocarrier of VP16, the mesopores in silica can enhance the encapsulation capacity of the nanocarrier and the AuNPs can effectively convert the NIR light into heat to speed up the drug deliver; meanwhile, the incorporation of Fe₃O₄ with high magnetization to the drug delivery platform realize drug targeting under an applied external magnetic field.     

Acid Functionalized Multiwall Carbon Nanotube/Magnetite (MWCNT)-COOH/Fe3O4 Hybrid: Synthesis, Characterization and Conductivity Evaluation

A functionalized multiwall carbon nanotube (MWCNT)–COOH/Fe₃O₄ hybrid was fabricated by co-precipitation method. Fe₃O₄ nanoparticles were stably attached to the surface of carboxyl groups (COOH). The presence of Fe₃O₄ nanoparticles and their surface conjugation to MWCNT have been confirmed by XRD, TEM and FT-IR techniques. Magnetic evaluation revealed a superparamagnetic character of the hybrid and therefore the attached Fe₃O₄ nanoparticles. The crystallite size (9 ± 3 nm), particle size (9 ± 2 nm) and magnetic domain size estimated for Fe₃O₄ are consistent with each other, which reveal the single crystalline character of the nanoparticles. Electrical conductivity and dielectric behavior have also been characterized by utilizing impedance spectroscopy up to 3 MHz for an isotherm line varying from 293 to 393 K by 10 K steps. Electrical characteristics and its complex dielectric approaches might be elucidated with the existence of a conventional tunneling conduction mechanism of temperature-independency. The AC conductivity of MWCNT–COOH/Fe₃O₄ hybrid could also be a consequence of the estimations of the universal dynamic response.     

Crystallinity,conductivity, and magnetic properties of PVDF‐Fe3O4 composite films

The formation of Fe₃O₄ nanoparticles by hydrothermal process has been studied. X‐ray Diffraction measurements were carried out to distinguish between the phases formed during the synthesis. Using the synthesized Fe₃O₄ nanoparticles, poly(vinyledene fluoride)‐Fe₃O₄ composite films were prepared by spin coating method. Scanning electron microscopy of the composite films showed the presence of Fe₃O₄ nanoparticles in the form of aggregates on the surface and inside of the porous polymer matrix. Differential Scanning calorimetry revealed that the crystallinity of PVDF decreased with the addition of Fe₃O₄. The conductitivity of the composite films was strongly influenced by the Fe₃O₄ content; conductivity increased with increase in Fe₃O₄ content. Vibration sample magnetometry results revealed the ferromagnetic behavior of the synthesized iron oxide nanoparticles with a Ms value of 74.50 emu/g. Also the presence of Fe₃O₄ nanoparticles rendered the composite films magnetic. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Efficient visible light magnetic modified iron oxide photocatalysts

Magnetite iron oxide (Fe₃O₄) nanoparticles were synthesized via simple co-precipitation method using ferrous and ferric ions salts. Fe₃O₄ nanoparticles were modified by silica and titania. Pure and modified nanoparticles were employed for dye degradation under visible light. X-ray diffraction analysis indicated inverse spinel structure of Fe₃O₄ nanoparticles. The particle size of magnetite nanoparticles is decreased due to coating of silica and titania. Scanning and transmission electron microscopy indicated the spherical morphology for all samples. The synthesized Fe₃O₄ nanoparticles were ferromagnetic in nature with highest saturation magnetization value of 1.1034 emu as compared to silica and titania coated samples. Fourier transform infra-red spectra confirmed the incorporation of magnetite nanoparticles with silica and titania. Titania modified magnetite sample showed the highest photocatalytic activity as compared to silica modified magnetite nanoparticles and bare iron oxide under visible light irradiations.     

Facile preparation of poly(ε-caprolactone)/Fe3O4@graphene oxide superparamagnetic nanocomposites

The main goal in this work was to prepare and characterize a kind of novel superparamagnetic poly(ε-caprolactone)/Fe₃O₄@graphene oxide (PCL/Fe₃O₄@GO) nanocomposites via facile in situ polymerization. Fabrication procedure included two steps: (1) GO nanosheets were decorated with Fe₃O₄ nanoparticles by an inverse co-precipitation method, which resulted in the production of the magnetite/GO hybrid nanoparticles (Fe₃O₄@GO); (2) incorporation of Fe₃O₄@GO into PCL matrix through in situ polymerization afforded the magnetic nanocomposites (PCL/Fe₃O₄@GO). The microstructure, morphology, crystallization properties, thermal stability and magnetization properties of nanocomposites were investigated with various techniques in detail. Results of wide-angle X-ray diffraction showed that the incorporation of the Fe₃O₄@GO nanoparticles did not affect the crystal structure of PCL. Images of field emission scanning electron microscope and transmission electron microscopy showed Fe₃O₄@GO nanoparticles evenly spread over PCL/Fe₃O₄@GO nanocomposites. Differential scanning calorimeter and polar optical microscopy showed that the crystallization temperature increased and the spherulites size decreased by the presence of Fe₃O₄@GO nanoparticles in the nanocomposites due to the heterogeneous nucleation effect. Thermogravimetric analysis indicated that the addition of Fe₃O₄@GO nanoparticles reduced the thermal stability of PCL in the nanocomposites. The superparamagnetic behavior of the PCL/Fe₃O₄@GO nanocomposites was testified by the superconducting quantum interference device magnetometer analysis. The obtained superparamagnetic nanocomposites present potential applications in tissue engineering and targeted drug delivery.     

Synthesis of polyvinyl alcohol hydrogel grafted by modified Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles: characterization and doxorubicin delivery studies

During the last two decades, serious efforts have been directed towards the synthesis and coating magnetic nanoparticles for biomedical applications. Among many different types of polymeric coating materials that have been utilized in previous studies, we have selected polyvinyl alcohol (PVA). In this study, we report a novel type of magnetite nanocomposite-based PVA hydrogel. For this purpose, first, Fe₃O₄ nanoparticles were modified through hexamethylene diisocyanate (HMDI) and then PVA was modified by bromoacetyl bromide to produce bromoacetylated PVA. The modified PVA was cross-linked through various diamines such as ethylene-diamine, propylene-diamine and hexamethylenediamine. The prepared weak tridimensional PVA hydrogels were further reacted through unreacted hydroxyl groups with Fe₃O₄, modified by HMDI to form magnetite hard tridimensional hydrogels. The swelling behavior of the prepared magnetite nanocomposites were investigated and showed a fast initial swelling followed by a mild increase until attaining equilibrium. The structural, morphological, thermal and magnetic properties of the synthesized magnetite nanocomposites were confirmed by FTIR, thermal gravimetric analysis, vibrating sample magnetometer and scanning electron microscopy. The doxorubicin anti-tumor drug was loaded on a selected synthesized magnetic hydrogel and in vitro drug release studies were done in phosphate buffer solution in 37 °C.     

Structure and magnetic properties of regenerated cellulose/Fe3O4 nanocomposite films

Cellulose nanocomposites containing high contents of Fe₃O₄ nanoparticles were successfully prepared with regenerated cellulose films as a matrix and mixture solutions of Fe²⁺/Fe³⁺ as precursors. The structure and properties of the magnetic nanocomposite films were investigated with X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, thermogravimetric analysis, and vibrating sample magnetometry. Fe₃O₄ nanoparticles as prepared were irregular spheres and were homogeneously dispersed in the cellulose matrix. With an increase in the concentration of precursors from 0.2 to 1.0 mol/L, the content of Fe₃O₄ nanoparticles in the dried nanocomposites increased from 12 to 39 wt %, and the particle diameter increased from 32 to 64 nm. The cellulose nanocomposite films demonstrated superparamagnetic behavior, and their saturation magnetizations were in the range 4.2–21.2 emu/g, which were related to the increase in Fe₃O₄ nanoparticle content. With increasing nanophase content, the nanocomposite films displayed significantly anisotropic magnetic properties in the parallel and perpendicular directions. This study provided a green and facile method for the preparation of biobased nanocomposite films with high nanophase content and excellent magnetic properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Magnetically Separable Fe3O4 Nanoparticles-Decorated Reduced Graphene Oxide Nanocomposite for Catalytic Wet Hydrogen Peroxide Oxidation

Fe₃O₄ nanoparticles-decorated reduced graphene oxide magnetic nanocomposites (Fe₃O₄/rGO NCs) were prepared by a facile one-step strategy, and further used as heterogeneous Fenton-like catalysts for catalytic wet hydrogen peroxide oxidation (CWHPO) of methylene blue (MB) at 25 °C and atmospheric pressure. The effects of variables such as the Fe₃O₄/rGO with the mass ratio of rGO, initial pH, MB concentration and H₂O₂ dosage were investigated. The Fe₃O₄/rGO NCs with rGO mass ratio of 10.0 wt % showed the highest H₂O₂-activating ability, which was six-fold than that of pure Fe₃O₄ nanoparticles (NPs). The resulting catalysts demonstrated high catalytic activity in a broad operation pH range from 5 to 9, and still retained 90.5 % catalytic activity after reuse in five cycles. Taking advantage of the combined benefits of rGO and magnetic Fe₃O₄ NPs, these Fe₃O₄/rGO NCs were confirmed as an efficient heterogeneous Fenton-like catalyst for CWHPO to treat organic pollutants. And a reasonable catalytic mechanism of Fe₃O₄/rGO NCs was proposed to interpret the degradation process.     

New Magnetic Polymer Nanocomposites on the Basis of Isotactic Polypropylene and Magnetite Nanoparticles for Adsorption of Ultrahigh Frequency Electromagnetic Waves

In this study, we report about the preparation of magnetic polymer nanocomposites on the basis of isotactic polypropylene and magnetite Fe₃O₄ nanoparticles. The structure and composition of polymer nanocomposite materials have been studied by scanning electron microscopy, atomic force microscopy, and X-ray dispersive analysis. The magnetic properties of polymer nanocomposites based on PP+Fe₃O₄have been investigated. It is found that not significant adhesion and agglomeration of nanoparticles occur, by increasing the nanoparticle content in polymer matrix up to 40%, and therefore they act as single-domain nanoparticles. The samples of nanocomposites based on PP+Fe₃O₄, with up to 40% content of Fe₃O₄, exhibit superparamagnetic properties. It was also found out that the magnetic polymer nanocomposite material based on PP+Fe₃O₄ is able to absorb ultrahigh frequency electromagnetic waves in the frequencies range from 0.1 to 30?GHz. The increase in Fe₃O₄ concentration from 5 to 40% at the 400?µm thicknesses of the films leads to an increase in absorption of electromagnetic waves of high frequency from 15 to 22.7%.     

Using a bifunctional polymer for the functionalization of Fe3O4 nanoparticles

A bifunctional maleimido-tetra(ethylene glycol)-poly(glycerol monoacrylate) (MAL-TEG-PGA) polymer was synthesized and used as a linker to couple functional biomolecules to iron oxide nanoparticles. The cell-penetrating peptide Tat was chosen as a model ligand and successfully conjugated to the surface of Fe₃O₄ nanoparticles using MAL-TEG-PGA. The Tat-conjugated Fe₃O₄ nanoparticles can be prepared simply by applying the linker to the iron oxide nanoparticles and then coupling the Tat peptide to the maleimide terminus or by coating the nanoparticles with a pre-coupled linker. Cell-uptake studies demonstrated that the Tat peptide was an efficient functional biomolecule to translocate iron oxide nanoparticles into the cell nucleus. Tat-conjugated nanoparticles thus prepared may be useful for drug or gene delivery.