Curing and Thermal Properties of PEPEB Liquid Crystalline Diepoxide/Aromatic Diamine

The liquid crystalline epoxy resin p-phenylene di[4-2-(2,3-epoxypropyl)ethoxy] benzoate (PEPEB) was synthesized. The curing behavior of the liquid crystalline epoxy resin (LCER) with 4,4-diaminodiphenylmethane (DDM) was studied by fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and torsional braid analysis (TBA). Morphology of curing product was observed by polarized optical microscopy (POM) at different temperatures. Nonisothermal curing kinetics of this system were investigated by DSC. Results show that the PEPEB has a smectic liquid crystalline structure, and the melting point, T _m, is 119°C, the clearing point is 184°C. The cured-system's gel point, T _I , is 83.5°C; cure temperature, T _P , is 111.6°C; and the disposal temperature, T _f , is 145.8°C; activation energy of curing reaction is 4.84 KJ/mol. Observation by POM shows that with the upgrade of initial curing temperature, the filament structure of this system transferred from anisotropy to isotropy.     

Synthesis and optical properties of cholesteric liquid‐crystalline oligomers displaying reversible thermochromism

A series of side‐chain liquid crystalline oligomers (P₁–P₇) have been synthesized with cyclo(methylhydrogeno)siloxane and two cholesteric liquid crystalline monomers cholesteryl 4‐(10‐undecylen‐1‐yloxy)benzoate (M₁) and cholesterol 4‐{6‐[(4‐(allyloxyl)‐benzoyl]‐hexanoxocarbonyl}‐benzoate (M₂). The chemical structures and liquid crystalline properties of the synthesized oligomers were investigated using various experimental techniques such as FTIR, ¹H‐NMR, DSC, POM, and XRD. All monomers and chiral oligomers show a cholesteric mesophase with very wide mesophase temperature ranges. They appear highly thermally stable with decomposition temperatures (T_d) at 5% weight loss greater than 300°C. The optical properties of the oligmers have been characterized by reflection spectra and optical rotation analysis. All synthesized oligomers display colors at room temperature, and show reversible thermochromism within a wide temperature range (>120°C). The λ_max values of the oligomers also nearly coincide during the first, second, and third heating cycles. The specific rotation of each oligomer is very sensitive to temperature, and the specific rotation value of P₃ smoothly changes from ?21.7° to ?0.7° when it is heated. The optical properties of the oligomers offer tremendous potential for various optical applications. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 1321‐1327, 2013     

Synthesis and characterization of the two novel liquid crystalline epoxy resins based on bisphenol‐s mesogen

Two novel liquid crystalline epoxy resins (LCER) based on bisphenol‐S mesogen, 4,4′‐Bis‐(2,3‐epoxypropyloxy)‐sulfonyl bis(1,4‐phenylene) (p‐BEPSBP) and sulfonyl bis(4,1‐phenylene) bis[4‐(2,3‐epoxypropyloxy)benzoate] (p‐SBPEPB), were synthesized. Their liquid crystalline behavior and structure were characterized by Fourier transmittance infrared ray (FTIR), differential scanning calorimetry (DSC), ¹HNMR, polarized optical microscopy (POM) and X‐ray diffraction (XRD). The results show that p‐BEPSBP is a kind of thermotropic liquid crystal and has a smectic mesophase with a melting point (T_m) at 165°C; the p‐SBPEPB is a kind of nematic mesophase with the temperature range of 155–302°C from the T_m to the clearing point T_i. The curing behaviors and texture of the liquid crystalline epoxy resins with 4,4′‐diaminodiphenyl ether (DDE) were also studied by DSC and some kinetic parameters were evaluated according to the Ozawa's method. The dynamic mechanical properties of curing products were also investigated by torsional braid analysis (TBA), and the results suggest that the dynamic mechanical loss peak temperature (T_p) of p‐BEPSBP/DDE and p‐SBPEPB/DDE is 120 and 130°C, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Curing and Morphology of BPA Epoxy Resin/LC Epoxy Resin PEPEB Composites

Liquid crystalline epoxy resin (LC epoxy resin) – p-phenylene di{4-[2-(2,3-epoxypropyl)ethoxy]benzoate} (PEPEB) was synthesized. The mixture of PEPEB with bisphenol-A epoxy resin (BPAER) was cured with a curing agent 4,4-diamino-diphenylmethane (DDM). The curing process and thermal behavior of this system were investigated by differential scanning calorimeter (DSC) and torsional braid analysis (TBA). The morphological structure was measured by polarizing optical microscope (POM) and scanning electron microscope (SEM). The results show that the initial curing temperature Ticu (gel point) of this system is 68.1°C, curing peak temperature T _pcu is 102.5°C, and the disposal temperature T _fcu is 177.6°C. LC structure was fixed in the cured epoxy resin system. The curing kinetics was investigated by dynamic DSC. Results showed that the curing reaction activation energy of BEPEB/BPAER/DDM system is 22.413 kJ/mol. The impact strength is increased 2.3 times, and temperature of mechanical loss peak is increased to 23°C than the common bisphenol-A epoxy resin, when the weight ratio of BEPEB with BPAER is 6 100.     

Synthesis and thermotropic liquid‐crystalline behaviour of novel main‐chain poly(ether ether ketone ketone)s containing a lateral tert‐butyl group

The synthesis of novel poly(ether ether ketone ketone)s containing a lateral group via the random copolymerization of 4,4′‐biphenol, tert‐butylhydroquinone and 1,4‐bis(p‐fluorobenzoyl)benzene is described. The copolymers were characterized by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction (WAXD) and polarized optical microscopy (POM) observation. The results showed that the thermotropic liquid‐crystalline properties were achieved in the copolymers containing 30 mol% and 50 mol% tert‐butylhydroquinone, which have relatively lower melting temperatures due to the copolymerization effect. Both the crystalline–liquid‐crystalline transition (T_m) and the liquid‐crystalline–isotropic phase transition (T_i) were observable in the DSC thermograms, while the biphenol‐based poly(aryl ether ketone) has only one melting transition. The hydroquinone‐based polymer was shown to be amorphous. Thermogravimetric analysis (TGA) results showed that these copolymers are all high‐temperature resistant with higher glass transition temperature between 147 and 149 °C, and higher decomposition temperature T_d in the range 480–520 °C. © 2000 Society of Chemical Industry     

Synthesis and crystallinity of poly(butylene 2,5-furandicarboxylate)

Poly(butylene 2,5-furandicarboxylate) (PBF) was obtained by esterification of 2,5-furandicarboxylic acid (FDCA) and 1,4-butylene glycol (BG). By using ¹H NMR at 750 MHz to recognize the trace end groups at different polymerization stages, the study provides a clear picture that the polymerization proceeds cleanly to give the desirable linear structure. On the basis of the end group analysis, the degree of polymerization of PBF was determined to be as high as 125, which is in agreement with the molecular weight from the viscosity study. Solid state ¹³C NMR revealed that one of the furan carbons is sensitive to local morphology. DSC and X-ray diffraction further revealed that the polymer had high tendency to form crystalline materials (T_m = 130 °C & 169 °C; T_g = 32 °C). On the basis of DSC and NMR evidences, the two crystalline states are assumed to be β-phase (less stable) and α-phase (more stable), respectively, by analogy with the crystalline structure of PBT. High tendency of forming crystalline structure allows the continuous fibers to be drawn from the PBF's melt. The results thus raise the hope that the biomass-derived PBF could be a promising furan counterpart of the petroleum-based poly(butylene terephthalate) (PBT).     

Synthesis and characterization of liquid crystalline ionomers with polymethylhydrosiloxane main-chain- and side-chain-containing sulfonic acid groups

A novel thermotropic side-chain liquid crystalline ionomer (LCI) containing sulfonic acid groups on the side-chain was synthesized by graft copolymerization of mesogenic monomer 4-allyloxy-benzoxy-4′-methoxyphenyl (ABM) and nonemesogenic monomer 4-allyloxy-azobenzene sulfonic acid (AABS) upon polymethylhydrosiloxane (PMHS). The chemical structures of the polymers were confirmed by IR spectroscopy. DSC and TGA were used to measure the thermal properties of those polymers and the mesogenic properties were characterized by polarized optical micrography (POM), DSC, and WAXD. The clearing point temperature (T_c) of these liquid crystalline ionomers was enhanced 50–60°C compared with the polymer without ionic groups. The LCIs exhibit a broad smectic mesogenic region of 80–90°C; the thermal stability below 200°C of the polymers decreases with increasing sulfonic acid concentration. The inherent viscosity of 0.5% solutions decreased with increasing sulfonic acid concentration in the polymer chains. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 1555–1561, 1998     

Kinetics of Curing and Thermal Degradation of POSS Epoxy Resin/DDS System

Polyhedral oligomeric silsesquioxanes epoxy resin (POSSER) was prepared from 3-glycidypropyl-trimethoxysilane (GTMS) and tetramethylammonium hydroxide (TMAH) by hydrolytic condensation. POSSER was characterized using Fourier-transformed infrared spectroscopy (FTIR), ¹H-NMR, and liquid chromagraphy/mass spectrometry (LC/MS). The epoxy value of POSSER is 0.50 mol/100 g. The LC/MS analysis indicated that T₁₀ is the majority and contain some amount of T₈, besides, a trace T₉ also exists. The curing kinetics of POSSER with 4,4′-diaminodipheny sulfone (DDS) as a curing agent was investigated by means of differential scanning calorimetry (DSC). The curing reaction order n is 0.8841 and the activation energy Ea is 61.06 kJ/mol from dynamic DSC analysis. Thermal stability and kinetics of thermal degradation were also studied by thermal gravimetric analysis (TGA). TGA results indicated that the temperature of POSSE/DDS system 5% weight loss is approximately 377.0°C, which is higher by 12.6°C than that of pure POSSER, and the primary degradation reaction (300–465°C) followed first order kinetics; the activation energy of degradation reaction is 75.81 kJ/mol.     

Europium‐containing cholesteric liquid crystalline polymers in the side chain

Europium‐containing cholesteric liquid crystalline polymers were graft copolymerized using poly(methylhydrogeno)siloxane, cholesteryl 4‐(allyloxy)benzoate (M₁), cholesteryl acrylate (M₂), and a europium complexes monomer (M₃). The chemical structures of the monomers were characterized by Fourier transform infrared and ¹H‐nuclear magnetic resonance. The mesomorphic properties and phase behavior were investigated by differential scanning calorimetry, thermo gravimetric analysis, polarizing optical microscopy, and X‐ray diffraction. With an increase of europium complexes units in the polymers, the glass transition temperature (T_g) did not change significantly; the isotropic temperature (T_i) and mesophase temperature range (ΔT) decreased. All polymers showed typical cholesteric Grandjean textures, which was confirmed by X‐ray diffraction. The temperatures at which 5% weight loss occurred (T_d) were greater than 300°C for the polymers. The introduction of europium complexes units did not change the liquid crystalline state of polymer systems; on the contrary, the polymers were enabled with the significant luminescent properties. With Eu³⁺ ion contents ranging between 0 and 1.5 mol %, luminescent intensity of polymers gradually increased and luminescent lifetimes were longer than 0.45 ms for the polymers. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40866.     

Isothermal crystallization behavior of metallocene‐catalyzed isotactic polypropylene

Isothermal crystallization behavior of isotactic polypropylene (iPP) synthesized using metallocene catalyst was investigated in this work. The isotacticity of the polypropylene was characterized by ¹³C‐NMR spectroscopy. It was found that the melting temperature (T_m) of the iPP is 123.51°C and the crystallization temperature (T_c) is 93°C. The iPP synthesized in this work did not show a general increase of T_m with an increase of crystallization temperature T_c, due to the short crystallization time of 20 min and low molecular weight (number average molecular weight = 6,300). The iPP showed a tendency of increasing heat of fusion (ΔH_f) with decreasing crystallization temperature. All the spherulites of iPP samples showed negative birefringence. For the iPP sample crystallized at the highest T_c (= 123°C, just below T_m), the spherulite showed a pronounced Maltese Cross and a continuous sheaf‐like texture aligning radially, which suggests that R‐lamellaes are dominant in this spherulite. The crystalline structure of the iPP was also investigated by X‐ray diffraction. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 231–237, 2005     

Synthesis and thermotropic liquid‐crystalline behavior of novel main‐chain poly(aryl ether ketones)

Novel aromatic poly(ether ketones) containing bulky lateral groups were synthesized via nucleophilic substitution reactions of 4,4′‐biphenol and (4‐chloro‐3‐trifluoromethyl)phenylhydroquinone (CF‐PH) with 1,4‐bis(p‐fluorobenzoyl)benzene. The copolymers were characterized by differential scanning calorimetry (DSC), wide‐angle X‐ray diffraction, and polarized light microscopy observation. Thermotropic liquid‐crystalline behavior was observed in the copolymers containing 40, 50, 60, and 70 mol % CF‐PH. The crystalline–liquid‐crystalline transition [melting temperature (T_m)] and the liquid‐crystalline–isotropic phase transition appeared in the DSC thermograms, whereas the biphenol‐based homopolymer had only a melting transition. The novel poly(aryl ether ketones) had glass‐transition temperatures that ranged from 143 to 151°C and lower T_m's that ranged from 279 to 291°C, due to the copolymerization. The polymers showed high thermal stability, and some exhibited a large range in mesophase stability. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1347–1350, 2003     

Synthesis of multi‐block copolymer and its compatibilization to the blends of poly(ether ether ketone) with thermotropic liquid crystalline polymer

A multiblock copolymer (BCP) containing amorphous poly(aryl ether ketone) (PAEK) and thermotropic liquid crystalline polymer (TLCP) segments was synthesized. The chemical structure and properties of BCP were characterized by fourier‐transform infrared spectrometer (FTIR), differential scanning calorimeter (DSC), gel permeation chromatograms (GPC), thermogravimetry analysis, polar light microscope (PLM), and solubility test respectively. BCP can dissolve in chloroform because of soluble PAEK block bonded with TLCP block, which was insoluble. The peak of the original PAEK oligomer was no more present in the GPC traces of the block copolymer. These facts indicated that polymer synthesized should be copolymers of the two components rather than blends. A single T_g at 138.1°C and broad melting endotherm at 315.7°C can be observed. The liquid crystalline texture of BCP showed uniformity in the view after heat treated for 10 min above its T_m under PLM. Ternary blends of poly(ether ether ketone) (PEEK)/TLCP/BCP were prepared by extrusion and characterized by DSC. DSC results showed that the crystallization temperature of PEEK phase in the blends shifted higher with the addition of TLCP. Wide angle X‐ray diffraction investigations indicated that the crystalline structure of PEEK was not disturbed by blending or compatibilizing. Scanning electron microscope and mechanical tests confirmed the compatibilizing effect of BCP. Reduction in dispersed phase TLCP size was observed when 2 phr by weight of compatibilizer was added to the blend. Measurement of the tensile properties showed increased elongation as well as improved modulus and strength to some extent. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Mesomorphic phase formation of plasticized poly(l‐lactic acid)

The effects of the crystallization temperature, T_c, on the crystal structure as well as its thermal behavior of plasticized poly(l ‐lactic acid) were investigated by means of wide‐angle X‐ray diffraction (WAXD), Fourier‐transform infrared spectroscopy (FTIR), and differential scanning calorimetry (DSC). PLLA blended with succinic acid‐bis[2‐[2‐(2‐methoxyethoxy)ethoxy]ethyl] ester (SAE) showed clear difference in T_c dependence of crystalline form compared to PLLA homopolymer. PLLA with 26 wt % SAE crystallized into orthorhombic α form for T_c above 80°C, while a peculiar disordered structure (mesophase) was obtained for T_c at 40°C. A detailed FTIR analysis of the mesophase of PLLA, focusing on the intra‐ and inter‐chain interaction in the structure, indicated that mesophase had a large degree of disorder in 10/3 helical conformation as well as its packing manner of disordered 10/3 helical chain. Upon heating, mesophase showed a steep exothermic peak at 80°C in DSC thermogram, indicating the phase transformation from mesophase to a form crystal. FTIR results showed that the degree of interchain interaction of C=O in PLLA started to decrease above 60°C, followed by steep increase at 80°C due to the recrystallization into a form. Melt‐recrystallization process in mesophase‐α transformation was clarified. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39762.     

Morphology and thermal properties of liquid crystal p‐PAEB/n‐propyl methacrylate copolymers

The copolymers of p‐phenylene di{4‐[2‐(allyloxy) ethoxy]benzoate} (p‐PAEB) with n‐propyl methacrylate (PMA) were synthesized. The liquid crystalline behavior and thermal properties of copolymers were studied by polarizing optical microscopy (POM), differential scanning calorimetry (DSC), X‐ray diffractometer (XRD), and torsional braid analysis (TBA). The results of XRD, POM, and DSC demonstrate that the phase texture of copolymers is affected by the composition of liquid crystal units in copolymers. The POM and XRD reveal that liquid crystal monomer (p‐PAEB) and copolymers of p‐PAEB with PMA are all smectic phase texture. The dynamic mechanical properties of copolymers are investigated with TBA. The results indicate that the phase transition temperatures and dynamic mechanical loss peak temperature T_p of copolymers are affected by the composition of copolymers and liquid crystal cross networks. The maximal mechanical loss T_p is 114°C and is decreased with added PMA. The behaviors of phase transition are affected by the crosslinking density, and it is revisable for lightly crosslinking LC polymer networks, but it is nonreversible for the densely crosslinking of LC polymer networks. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of 4-arms hydroxy-functionalized PMMA-b-PE through combining free radical polymerization with coordination polymerization

The copolymerization of MMA with ethylene was promoted by metallocene complex in the presence of initiator tetra(2,3-epoxy propoxy)silane (I_s), reducing agent Zn and cocatalyst MAO, combining free radical polymerization with coordination polymerization via sequential monomer addition strategy in one-pot to produce 4-arms hydroxy-functionalized PMMA-b-PE. The effects of polymerization conditions such as temperature, time, ethylene pressure and Al/Ti molar ratio on the polymerization performance were investigated. 4-Arms hydroxy-functionalized PMMA-b-PE was obtained by solvent extraction and determined by GPC, MALLS, DSC, FT-IR, WAXD and ¹H(¹³C) NMR. The DSC result indicated that the 4-arms hydroxy-functionalized PMMA-b-PE had one T_g at 87.0 °C and one T_m at 117.0 °C which attributed to T_g of PMMA segment and T_m of PE segment, respectively. The microstructure of 4-arms hydroxy-functionalized PMMA-b-PE was further confirmed by WAXD, FT-IR, and ¹³C NMR analysis. These results demonstrated that the obtained 4-arms block copolymer consisted of PMMA segment and crystalline PE segment.     

Study of poly(trimethylene terephthalate) as an engineering thermoplastics material

Poly(trimethylene terephthalate) (PTT) was systematically studied as an engineering thermoplastics material. Crystallization rates, crystalline degrees, and mechanical properties of two commercial PTT polymers and one glass fiber–reinforced PTT compound were investigated and compared with those of poly(butylene terephthalate) (PBT). PTT raw polymers have crystallization temperature (T_c) values around 152°C, and their kneaded polymers show T_c values of about 177°C, about 15°C lower than the values of PBT polymers used in this study. From the exothermic heat values of DSC measurements, both PTT and PBT show the crystalline degree order greater than 30%. Injection‐molded PTT specimens and PBT specimens exhibit crystalline degrees from 18 to 32% and 23.8 to 30%, respectively. PTT polymers show higher tensile and flexural strengths, but lower impact strengths and elongations than those of PBT polymers. The low elongation behavior of PTT does not change with the intrinsic viscosity and the molder temperature. PTT‐GF30 promotes better mechanical properties than those of PBT‐GF30, close to those of PET‐GF30. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 1657–1666, 2004     

Characterization of gamma irradiated polyethylene films by DSC and X‐ray diffraction techniques

The effect of gamma radiation on the thermal behavior and crystalline structure of low density polyethylene (LDPE) has been investigated using differential scanning calorimetry (DSC) and X‐ray diffraction techniques (XRD). Gamma irradiation was carried out in atmospheric air to a maximum dose of 883 kGy. DSC results of the heating run from room temperature up to 150 °C showed that the melting temperature (T_m), and onset temperature of LDPE film decrease linearly with increasing irradiation dose. However, upon cooling LDPE film from 150 °C to room temperature, the crystallization temperature (T_c) and onset temperature were found to decrease non‐linearly with increasing irradiation dose up to 500 kGy and then tended to level off. The change in heat of fusion (ΔH_f) with irradiation dose was found to proceed with different behaviour, two stages, with a kink at irradiation dose of about 500 kGy, being observed. This suggests the occurrence of degradation and crosslinking at low and high doses, respectively. However, parameters of the X‐ray diffraction pattern such as number of diffraction patterns, peak position (2θ) and width of the diffraction pattern, support the results of DSC measurements. © 2000 Society of Chemical Industry     

Thermal transitions and stability of melt mixed TiO2/Poly(L‐lactic acid) nanocomposites

Poly(L‐lactic acid) (PLLA) nanocomposites containing 5, 10, and 20 wt% titanium dioxide (TiO₂), were prepared by mixing in a co‐rotating twin‐screw extruder. By X‐ray diffraction, a transformation of less ordered (α’‐form) to better organized crystalline (α‐form) structure of PLLA was observed with increasing TiO₂ content. Differential scanning calorimetry (DSC) tests revealed that cold crystallization was facilitated, as shown by the decrease of cold crystallization temperature (T_cc). The main melting peak of PLLA phase in nanocomposites, shifted towards higher temperatures and a shoulder appeared in the lower temperature flank of the curve, revealing a second peak for 20/80 w/w TiO₂/PLLA nanocomposites. The effect of TiO₂ on the isothermal crystallization of PLLA, in the temperature range T_ic: 100–120°C, was also investigated by DSC. At lower temperatures (T_ic: 100 and 110°C), the effect of TiO₂ nanoparticles is an increase of the crystallization rate, leading to lower time for the completion of crystallization, in comparison with that of pure PLLA. The inverse effect was observed at higher crystallization temperatures (T_ic: 115 and 120°C). The kinetic analysis of the crystallization behavior of the examined nanocomposites fits the Avrami equation quite well and gives values for exponent (n) varying between 2 and 3, suggesting a spherulitic crystalline morphology. POLYM. ENG. SCI., 59:704–713, 2019. © 2018 Society of Plastics Engineers     

Synthesis and characterization of poly(arylene ether) containing cyanate ester networks

A series of bisphenols containing ether linkage were prepared from halo phenol/dihalo compound and dihydroxy compounds in the presence of K₂CO₃. The bisphenols were transformed to cyanate esters by treatment with cyanogen bromide using triethyl amine catalyst. The structure of all the five bisphenols and the cyanate esters were structurally confirmed by FT-IR, ¹H-NMR and ¹³C-NMR spectral methods and elemental analysis. The cyanate esters were cured at 100 °C (30 min) → 150 °C (30 min) → 200 °C (60 min) → 250 °C (3 hr). The thermal properties of the cured resins were studied by DSC and TGA. DSC analysis shows that these cyanate esters exhibit T _g in the range of 203–234 °C. The CE(c) has the highest glass transition temperature. The cyanate ester CE(e) shows the lowest T _g which is due to its asymmetric structure. The initial degradation temperature of the cured resins was found to be in the range of 324–336 °C. The Limiting Oxygen Index (LOI) value, determined by Van Krevelen’s equation, is in the range of 35.5–38.7.     

Crystallization of Stoichiometric SbSI Glass

Congruent crystallization of antimony sulphoiodide (SbSI) glass of stoichiometric composition, which is prepared successfully for the first time using rapid melt‐quenching, has been investigated using differential scanning calorimetry (DSC). The results for glass powder show a glass transition at 127°C and two separate exothermal peaks with maxima around 140°C and 190°C. The ratio of the intensities of the exothermal peak at ~190°C to the peak at ~140°C increases as the particle size and heating rate are increased, but their total enthalpy remains constant at 62 ± 2 J/g for all DSC runs. Surface heating of the glass induced by a 520 nm CW laser shows two contracted regions: needle‐like crystalline formations at low temperature and bulk crystallization at high temperature. The observed phenomena and DSC results suggest two different kinds of crystallization of the SbSI phase: one‐dimensional crystallization at low temperature which starts from the sample surface and three‐dimensional bulk crystallization that continues the transformation to crystalline state at higher temperatures. The origin of the two different crystallizations can be traced to the strong anisotropy of the SbSI crystal structure due to the weak van der Waals interaction between covalent‐ionic chains (Sb₂S₂I₂)_n.