Microbial screening of copolymers of 2,4‐dichlorophenyl methacrylate with N‐vinylpyrrolidone: synthesis and characterization

Copolymers of 2,4‐dichlorophenyl methacrylate and hydrophilic monomer (N‐vinylpyrrolidone) were synthesized with different feed ratios using dimethylformamide as solvent and 2,2′‐azobisisobutyronitrile as initiator at 70 °C. The copolymers were characterized by IR spectrometry. Copolymer compositions were determined by UV spectrometry. The monomer reactivity ratios were determined by applying the conventional linearization method of Fineman‐Ross. Gel permeation chromatography was employed for determining molecular weights and polydispersity indexes. Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. Homo‐ and copolymers were tested for their antimicrobial properties against selected microorganisms. © 2003 Society of Chemical Industry     

COPOLYMERS OF 2,4-DICHLOROPHENYL METHACRYLATE WITH BUTYL METHACRYLATE AND THEIR APPLICATION AS BIOCIDES

Copolymers of 2,4-dichlorophenyl methacrylate and butyl methacrylate were synthesized with different monomer concentrations using toluene as a solvent and 2,2′-azobisisobutyronitrile (AIBN) as an initiator at 70°C. The copolymers were characterized by IR-spectroscopy. Copolymer compositions were determined by UV-spectroscopy. The reactivity ratios for monomer pairs were determined by Fineman-Ross method. Gel permeation chromatography was employed for determining the average molecular weights and the polydispersity index. The intrinsic viscosities of polymers were also discussed. Thermogravimetric analyses of polymers were carried out in nitrogen atmosphere. The homo- and copolymers were tested for their effect on the growth of various microorganisms.     

Synthesis,characterization, and antimicrobial activity of acrylic copolymers

2,4‐Dichlorophenyl methacrylate (2,4‐DMA) and vinyl acetate (VAc) were copolymerized with different feed ratios using dimethyl formamide (DMF) as a solvent and 2,2′‐azobisisobutyronitrile (AIBN) as an initiator at 70°C. The copolymers were characterized by infrared (IR) spectroscopy. Copolymer compositions were determined by ultraviolet (UV) spectroscopy. The monomer reactivity ratios were evaluated by the Fineman–Ross method. Average molecular weight and polydispersity index were determined by gel permeation chromatography (GPC), and the intrinsic viscosities of polymers were also discussed. Thermogravimetric analyses of polymers were carried out under a nitrogen atmosphere. The homo‐ and copolymers were tested for their antimicrobial activity against selected microorganisms. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 895–900, 2003     

Synthesis,characterization of poly (4-benzyloxyphenylmethacrylate) and its copolymer with butyl methacrylate and determination of monomer reactivity ratios

The monomer 4-benzyloxyphenylmethacrylate (4-BOPMA) was synthesized by reacting 4-benzyloxy phenol dissolved in methylethylketone (MEK) with methacryloyl chloride in the presence of triethylamine. The homopolymer and various copolymers of 4-BOPMA with butylmethacrylate (BMA) were synthesized by the free radical polymerization in MEK at 70?±?1?°C in nitrogen atmosphere using benzoylperoxide as initiator. The homopolymer and copolymers were characterized by various spectral techniques like IR, ¹H-NMR, ¹³C-NMR spectroscopic techniques. The molecular weights of the polymers were determined by gel permeation chromatography. The glass transition temperatures of polymers were determined by differential scanning calorimeter. The thermal stability of the polymers was performed by thermo gravimetric analysis in inert atmosphere. The monomer reactivity ratios were determined using the conventional linearization methods such as Fineman–Ross (r₁?=?0.438, r₂?=?0.2323), Kelen Tüdös (r₁?=?0.4648, r₂?=?0.2992) and extended Kelen Tüdös (r₁?=?0.4489, r₂?=?0.2616).     

Acrylic Homo- and Co-polymers Based on 2, 4-dichlorophenyl Methacrylate and 8-quinolinyl Methacrylate

The monomer 2, 4-dichlorophenyl methacrylate (2,4-DMA) was synthesized from 2, 4-dichlorophenol and characterized by conventional methods. The homopolymers of 2,4-dichlorophenyl methacrylate and its copolymers with 8-quinolinyl methacrylate (8-QMA) in different feed ratio were prepared by free radical polymerization using dimethyl formamide (DMF) as a solvent and 2,2-azobis iso butyronitrile (AIBN) as an initiator. The resulting polymers were characterized by using IR spectroscopy. Reactivity ratios of monomer were evaluated using UV-spectroscopy. Average molecular weights and polydispersity were determined by gel permeation chromatography (GPC). Solution viscosity was also obtained. The thermal analysis was carried out using TGA and DSC. The homo- and co-polymers were also tested for their antimicrobial properties against selected microorganism. The metal ion uptake capacity of synthesized copolymers was estimated by batch equilibration method using different metal ion solution under different experimental conditions. It is observed that due to the presence of pendant ester bound quinoline group, the copolymers are capable of adsorbing cations from their aqueous solution.     

4‐chloro‐3‐methylphenyl methacrylate copolymers with 2,4‐dichlorophenyl methacrylate: Synthesis,characterization, and antimicrobial activity

4‐Chloro‐3‐methylphenyl methacrylate (CMPM) and 2,4‐dichlorophenyl methacrylate (2,4‐DMA) were synthesized by reacting methacryloyl chloride with 4‐chloro‐3‐methylphenol (CMP) and 2,4‐dichlorophenol (2,4‐DP), respectively. Homo and copolymers of CMPM and 2,4‐DMA were obtained from different monomer feed ratios, using 2,2′‐azobisisobutyronitrile as initiator in toluene at 70°C. IR‐spectroscopy was employed to characterize the resulting homo and copolymers. Copolymer compositions were determined by ultraviolet (UV) spectroscopy. Fineman–Ross method was used to calculate the reactivity ratios of the monomers. Average molecular weight and polydispersity index were obtained by gel permeation chromatography (GPC). Thermogravimetric analyses (TGA) and differential thermal analysis (DTA) of copolymers were carried out under a nitrogen atmosphere. Antimicrobial effects of the homo and copolymers were also investigated for various microorganisms such as bacteria, fungi, and yeast. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:439–448, 2006     

Synthetic control of sequence distribution in PDPS/PDMS copolymers

Very narrow molecular weight distributed poly(dimethylsiloxane-co-diphenylsiloxane) copolymers with different sequence distribution have been synthesized through ring-opening copolymerization under kinetically controlled conditions. The sequence distribution of the monomer units in the copolymers was determined by high resolution¹H NMR spectroscopy and the monomer reactivity ratios. The copolymers were also characterized by GPC and DSC analysis. The systematic variance in thermal transitions confirmed the assignment of the monomer sequencing in the copolymers.     

Photoresponsive polymers having pendant chlorocinnamoyl moieties: synthesis, reactivity ratios and photochemical properties

New photoreactive homo- and copolymers containing pendant chlorocinnamoyl moieties were respectively synthesized by homopolymerization of corresponding acrylic monomer and copolymerization with glycidyl methacrylate. The diverse structures were characterized by different spectroscopic techniques. The thermal properties of the photosensitive polymers were investigated by thermogravimetric analysis in air and differential scanning calorimetry under nitrogen atmosphere. The compositions of polymers were determined by ¹H-NMR analysis. The reactivity ratios of both comonomers were calculated using the conventional linearization methods such as Fineman-Ross, Kelen-Tudos, extended Kelen-Tudos and a non-linear error-in-variables model (EVM) method using a computer program, RREVM, in order to optimize the reaction conditions for industrial applications. The photoreactivity of newly synthesized homo- and copolymers containing pendant chlorocinnamoyl moieties was investigated in solution as well as in thin films. The effects of solvent nature, concentration, temperature, copolymer compositions and photosensitizers on the rate of photocrosslinking of these new photoresponsive polymers were evaluated. Suitable conditions were discussed for using as negative photoresists in industries.     

Synthesis and characterization of copolymers of bromoacrylated methyl oleate

In this study, methyl oleate was bromoacrylated in the presence of N‐bromosuccinimide and acrylic acid in one step. Homopolymers and copolymers of bromoacrylated methyl oleate (BAMO) were synthesized by free radical bulk polymerization and photopolymerization techniques. Azobisisobutyronitrile (AIBN) and 2,2‐dimethoxy‐2‐phenyl‐acetophenone were used as initiators. The new monomer BAMO was characterized by FTIR, GC‐MS, ¹H, and ¹³C‐NMR spectroscopy. Styrene (STY), methylmethacrylate (MMA), and vinyl acetate (VA) were used for copolymerization. The polymers synthesized were characterized by FTIR, ¹H‐NMR, ¹³C‐NMR, and differential scanning calorimetry (DSC). Molecular weight and polydispersities of the copolymers were determined by GPC analysis. Ten different feed ratios of the monomers STY and BAMO were used for the calculation of reactivity ratios. The reactivity ratios were determined by the Fineman–Ross and Kelen–Tudos methods using ¹H‐NMR spectroscopic data. The reactivity ratios were found to be r_sty = 0.891 (Fineman–Ross method), 0.859 (Kelen–Tudos method); r_bamo = 0.671 (Fineman–Ross method), 0.524 (Kelen–Tudos method). © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2475–2488, 2004     

Copolymerization of 4-biphenyl methacrylate with glycidyl methacrylate: Synthesis, Characterization, thermal properties and determination of monomer reactivity ratios

Summary The methacrylic monomer, 4-biphenylmethacrylate (BPM) was synthesized by reacting 4-biphenyl phenol dissolved in ethyl methyl ketone (EMK) with methacryloyl chloride in presence of triethylamine as a catalyst. The copolymers of BPM with glycidyl methacrylate (GMA) were synthesized by free radical polymerization in EMK solution at 70±1 °C using benzoyl peroxide as a free radical initiator. The copolymerization behaviour was studied in a wide composition interval with the mole fractions of BPM ranging from 0.15 to 0.9 in the feed. The copolymers were characterized by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. The solubility was tested in various polar and non polar solvents. The molecular weight and polydispersity indices of the polymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in BPM content. The thermogravimetric analysis of the polymers showed that the thermal stability of the copolymer increases with BPM content. The copolymer composition was determined using ¹H-NMR spectra. The monomer reactivity ratios were determined by the application of conventional linearization methods such as Fineman-Ross (r₁=0.392 ± 0.006, r₂ = 0.358 ± 0.007, Kelen-Tudos (r₁= 0.398 ± 0.004, r₂= 0.365 ± 0.013) and extended Kelen-Tudos methods (r₁= 0.394 ± 0.004, r₂= 0.352 ± 0.006).     

Synthesis of polystyrene modified with fluorine atoms: Monomer reactivity ratios and thermal behavior

Homo‐ and copolymers of 4‐fluorostyrene (FSt) and styrene (St) were synthesized with different feed ratios using free radical bulk polymerization with azobisisobutyronitrile (AIBN) as initiator. It yielded series of (co)polymers with various amounts of included FSt, P(St‐co‐FSt) (5–50 mol%) and PFSt. The effect of the initiator concentration on the molecular weights of the homopolymers, that is, PSt and PFSt was investigated. Copolymer compositions were determined by nuclear magnetic resonance spectroscopy. The relative reactivity ratios of both comonomers were determined by applying the conventional linearization methods of Jaacks (J), Finemann–Ross (F–R), inverted Finemann–Ross (IF–R), and Kelen‐Tüdos (K–T). The reactivity ratios values of St and FSt obtained from J plot are 1.06 and 0.84, F–R plot are 1.18 and 1.06, IF–R 1.01 and 0.86, and K–T plot 1.04 and 0.88, respectively. Thermal properties of prepared (co)polymers, that is, glass transition temperature (T_g) and thermal stability, were determined from differential scanning calorimetry and thermogravimetrical measurements. The lack of significant influence of FSt comonomer content on T_g of (co)polymers was observed. Additionally, the thermal degradation kinetics of obtained PSt and PFSt was studied by thermogravimetric analysis. Kinetic parameters such as the thermal decomposition activation energy (E) and frequency factor (A) were estimated by Ozawa model [E(O) and A(O), respectively] and Kissinger model [E(K) and A(K), respectively]. The activation energy and the frequency factor of PFSt (253 kJ/mol) were higher than PSt (236 kJ/mol). The resulting activation energies estimated using the two methods were quite close. POLYM. ENG. SCI., 54:1170–1181, 2014. © 2013 Society of Plastics Engineers     

Copolymerization of 2-methyl-N-1,3-thiazole-2-ylacrylamide with glycidyl methacrylate: synthesis, characterization, reactivity ratios and biological activity

The free-radical copolymerization of 2-methyl-N-1,3-thiazole-2-ylacrylamide monomer (TMA) with glycidyl methacrylate (GMA) was carried out in 1,4-dioxane at 65 ± 1 °C using azobisisobutironitril (AIBN) as an initiator. The copolymers were characterized by FTIR, ¹³C-NMR and ¹H-NMR spectroscopic methods. The copolymer compositions were determined by elemental analysis. The weight-average and number-average molecular weights of the copolymers were obtained by gel permeation chromatography (GPC). The polydispersity indices of the polymers, determined with gel permeation chromatography, suggested a strong tendency for chain termination by disproportionation. Thermal properties of the polymers were also studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). The monomer reactivity ratios were calculated according to the general copolymerization equation using Kelen–Tudos and Fineman–Ross linearization methods. The reactivity ratios indicated a tendency toward for alternation. The thermal decomposition activation energies of the polymers were evaluated by Ozawa method. The antibacterial and antifungal effects of the copolymers were also investigated on various bacteria and fungi. All the products showed moderate activity against different strains of bacteria and fungi.     

Functional copolymers of p‐cumyl phenyl methacrylate and glycidyl methacrylate: Synthesis,characterization, and reactivity ratios

Free‐radical polymerization of p‐cumyl phenyl methacrylate (CPMA) was performed in benzene using bezoyl peroxide as an initiator at 80°C. The effect of time on the molecular weight was studied. Functional copolymers of CPMA and glycidyl methacrylate (GMA) with different feed ratios were synthesized by free‐radical polymerization in methyl ethyl ketone at 70°C, and they were characterized by FTIR and ¹H‐NMR spectroscopy. The molecular weights and polydispersity indexes of the polymers and copolymers were determined by gel permeation chromatography. The copolymer composition was determined by ¹H‐NMR. The glass‐transition temperature of the polymer and the copolymers was determined by differential scanning calorimetry. The reactivity ratios of the monomers were determined by the Fineman–Ross and Kelen–Tudos methods. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 336–347, 2005     

Homopolymer of 4-chloro-3-methyl Phenyl Methacrylate and its Copolymers with Butyl Methacrylate: Synthesis, Characterization, Reactivity Ratios and Antimicrobial Activity

The methacrylate monomer 4-chloro-3‐methyl phenyl methacrylate (CMPM) was synthesized by reacting 4-chloro-3‐methyl phenol with methacryloyl chloride. The homopolymer and various copolymers of CMPM with n-butyl methacrylate were synthesized by free-radical polymerization in toluene at 70°C using 2,2′-azobis(isobutyronitrile) as the initiator. The CMPM monomer was characterized by Fourier transform IR and ¹H-NMR studies. The copolymers were characterized by IR spectroscopy. The molecular weights (M _n and M _w) and the polydispersity index were obtained from gel permeation chromatography. The solubility and intrinsic viscosity of the homopolymer and the copolymers are also discussed here. The copolymer composition obtained from UV spectra led to the determination of reactivity ratios employing Fineman-Ross and Kelen-Tudos linearization methods. Thermogravimetric analyses of the homopolymer and the copolymers were carried out under a nitrogen atmosphere. The homopolymer and the copolymers prepared were tested for their antimicrobial activity against bacteria, fungi and yeasts.     

Copolymers of poly(n-alkyl acrylates): synthesis, characterization, and monomer reactivity ratios

Poly(n-alkyl acrylate) copolymer reactivity ratios were determined for n-alkyl acrylate monomers of various side-chain lengths n ranging from 6 to 22. Two sets of copolymers were synthesized to less than <10% conversion to evaluate the reactivity ratios. The first set included P(A10-co-A14), P(A10-co-A18), and P(A14-co-A18); while the second set consisted of P(A6-co-A12), P(A6-co-A22) and P(A12-co-A22). Copolymers were formed from monomer mixtures at 25 mol% intervals ranging from 0 through 100 mol%. ¹³C NMR was performed on the homo polymers and the low conversion copolymers to determine the reactivity ratios of the monomers in each copolymer system. It was determined that the reactivity ratios for all monomers examined here were approximately equal to one. Physical properties of the copolymers, including melting point, heat of fusion, and permeation as a function of temperature, of the low conversion polymers were compared to copolymers formed at 100% conversion to demonstrate that these properties are independent of conversion because no composition drift occurs during polymerization.     

Synthesis, Characterization and Reactivity Ratios of Phenylethyl Acrylate/Methacrylate Copolymers

2-Phenylethyl acrylate (PEA) and 2-Phenylethyl methacrylate (PEMA) were synthesized by reacting 2-Phenyl ethanol with acryloyl and methacryloyl chloride respectively. Homopolymers and copolymers were prepared by free radical polymerization technique using benzoylperoxide as initiator. Copolymers of PEA and PEMA with methyl acrylate (MA) and N-vinyl pyrollidone (NVP) of different compositions were prepared. The monomers and polymers were characterized by IR and NMR techniques. Thermal stability of the polymers were determined by TG analysis. The composition of the copolymer was determined using ¹H-NMR analysis. The reactivity ratios of the monomers were determined by the application of Finemann–Ross and Kelen–Tudos methods. The prepared copolymers were tested on leather for their pressure sensitive adhesive property.     

Copolymerization of 4-cyanophenyl methacrylate with methyl methacrylate: Synthesis,characterization and determination of monomer reactivity ratios

Summary A novel methacrylic monomer, 4-cyanophenyl methacrylate (CPM) was synthesized by reacting 4-cyanophenol dissolved in methyl ethyl ketone (MEK) with methacryloyl chloride in the presence of triethylamine as a catalyst. Copolymers of CPM with methyl methacrylate(MMA) at different composition was prepared by free radical solution polymerization at 70±1 °C using benzoyl peroxide as initiator. The copolymers were characterized by FT-IR, ¹H-NMR and ¹³C-NMR spectroscopic techniques. The solubility of the polymers was tested in various polar and non polar solvents. The molecular weight and polydispersity indices of the copolymers were determined using gel permeation chromatography. The glass transition temperature of the copolymers increases with increase in mole fraction of MMA content. The thermal stability of the copolymer increases with increases in mole fraction of CPM content in the copolymer. The copolymer composition was determined by using ¹H-NMR spectroscopy. The monomer reactivity ratios estimated by the application of linearization methods such as Fineman-Ross (r₁=2.524±0.038, r₂=0.502±0.015), Kelen-Tudos (r₁=2.562±0.173, r₂=0.487±0.005) and extended Kelen-Tudos methods (r₁=2.735±0.128, r₂=0.4915±0.007).     

Synthesis and characterization of novel fluorine‐containing methacrylate copolymers: Reactivity ratios,thermal properties,and antimicrobial activity

The free‐radical‐initiated copolymerization of 2‐(4‐acetylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (AOEMA) and 2‐(4‐benzoylphenoxy)‐2‐oxoethyl‐2‐methylacrylate (BOEMA) with 2‐[(4‐fluorophenyoxy]‐2‐oxoethyl‐2‐methylacrylate (FPEMA) were carried out in 1,4‐dioxane solution at 65°C using 2,2′‐azobisisobutyronitrile as an initiator with different monomer‐to‐monomer ratios in the feed. The monomers and copolymers were characterized by FTIR and ¹H‐ and ¹³C‐NMR spectral studies. ¹H‐NMR analysis was used to determine the molar fractions of AOEMA, BOEMA, and FPEMA in the copolymers. The reactivity ratios of the monomers were determined by the application of Fineman‐Ross and Kelen‐Tudos methods. The analysis of reactivity ratios revealed that BOEMA and AOEMA are less reactive than FPEMA, and copolymers formed are statistically in nature. The molecular weights (M _w and M _n) and polydispersity index of the polymers were determined using gel permeation chromatography. Thermogravimetric analysis of the polymers reveals that the thermal stability of the copolymers increases with an increase in the mole fraction of FPEMA in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of FPEMA in the copolymers. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Free Radical Copolymerization of Novel Methacrylates with Acrylonitrile and Determination of Monomer Reactivity Ratios

p-methoxyphenoxy and p-chlorophenoxy group containing methacrylate based monomer 2-(p-methoxyphenoxy)-2-oxo-ethyl methacrylate (pMPOEMA) and 2-(p-chlorophenoxy)-2-oxo-ethyl methacrylate (p-ClPOEMA) were synthesized by reacting p-methoxyphenyl chloroacetate (pMPClAcO) and p-chlorophenyl chloroacetate (pClPClAcO) with sodium methacrylate in acetonitrile respectively. (pMPClAcO) and (pClPClAcO) were prepared by reacting p-methoxyphenol and p-chlorophenol dissolved in benzene with chloroacetylchloride. The free-radical-initiated copolymerization of (pMPOEMA) and (pClPOEMA) with acrylonitrile (AN) were carried out in 1,4-dioxane solution at 65 ^○C using 2,2′-azobisisobutyronitrile (AIBN) as an initiator with different monomer-to-monomer ratios in the feed. The monomers and copolymers were characterized by FTIR, ¹H- and ¹³C-NMR spectral studies. The copolymer compositions were evaluated by nitrogen content in polymers. The reactivity ratios of the monomers were determined by the application of Fineman–Ross and Kelen–Tüdös methods. The analysis of reactivity ratios revealed that pMPOEMA and pClPOEMA are more reactive than AN, and copolymers formed are statistically in nature. The molecular weights ( and ) and polydispersity index of the polymers were determined using gel permation chromagtography. Thermogravimetric analysis of the polymers reveal that the thermal stability of the copolymers increases with an increase in the mole fraction of AN in the copolymers. Glass transition temperatures of the copolymers were found to decrease with an increase in the mole fraction of AN in the copolymers.     

Silicone/polypropylene oxide-polyethylene oxide copolymer/clay composites (i) - curing behavior,intermolecular interaction and thermomechanical properties

The copolymerization of 2-(3-mesityl-3-methylcyclobutyl)-2-ketoethyl methacrylate monomer with acrylonitrile and styrene were carried out in 1,4-dioxane solution at 60^○C using AIBN as an initiator. The copolymers were characterized by Fourier transform infrared, ¹H-NMR, and ¹³C-NMR spectroscopic techniques. Thermal properties of the polymers were also studied by thermogravimetric analysis and differential scanning calorimetry. The copolymer compositions were determined by elemental analysis and ¹H-NMR technique. The monomer reactivity ratios were calculated by the application of conventional linearization methods as a result of Fineman–Ross and Kelen–Tüdös to less than 1 for both monomers.