Interpenetrating Polymer Networks Based on Gelatin and Poly(Vinyl Pyrollidone): Evaluation of Degradation,Histocompatibility, Cytotoxicity,and Drug Release

Interpenetrating polymer networks (IPNs) based on crosslinked gelatin [Gx] and poly(vinyl pyrrolidone) [PVPx] were synthesized using gamma irradiation. Degradability of IPNs was found to be dependent on the irradiation dose and crosslinker concentration as well as on the composition of IPNs. Samples prepared at dose of 0.07 and 0.14 Mrad degraded within 15 days in comparison to samples prepared at higher doses [0.20, 0.25 Mrad, and 0.30 Mrad]. Cell viability and histocompatibility studies suggest that IPNs based on gelatin and PVPx can be used as biodegradable drug delivery devices.     

Poly(vinyl acetate)/polyacrylate semi‐interpenetrating polymer networks. II. Thermal,mechanical, and morphological characterization

The thermal, dynamic mechanical, and mechanical properties and morphology of two series of semi‐interpenetrating polymer networks (s‐IPNs) based on linear poly(vinyl acetate) (PVAc) and a crosslinked n‐butyl acrylate/1,6‐hexanediol diacrylate copolymer were investigated. The s‐IPN composition was varied with different monoacrylate/diacrylate monomer ratios and PVAc concentrations. The crosslinking density deeply affected the thermal behavior. The results showed that a more densely crosslinked acrylate network promoted phase mixing and a more homogeneous structure. The variation in the linear polymer concentration influenced both the morphology and mechanical properties. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Structure–property relationships of lightly chemical crosslinked poly(vinyl chloride) thermoplastic elastomer

Chemical crosslinked poly(vinyl chloride) (C‐PVC) was synthesized by vinyl chloride suspension polymerization in the presence of diallyl phthalate (DAP) and plasticized to prepare poly(vinyl chloride) (PVC) thermoplastic elastomer (TPE) materials. The chemical crosslinking and physical crosslinking structure in chemical crosslinked PVC‐TPE were investigated. It showed that the gel fraction and the crosslinking density of gel increased as the feed concentration of DAP increased. C‐PVC prepared by VC/DAP copolymerization was lightly crosslinked as compared with irradiation crosslinked PVC. Physical entanglements would greatly influence the crosslinking density of gel when the gel fraction was high. Chemical crosslinking had little influence on the recrystallization behavior of PVC. A structure model of chemical crosslinked PVC‐TPE was proposed, in which chemical networks acted with physical networks cooperatively. It also showed that chemical crosslinking and physical crosslinking influenced the processability and mechanical properties of chemical crosslinked PVC‐TPE cooperatively. Although the processability of PVC‐TPE deteriorated with chemical crosslinking, the dimension stability and elasticity of PVC‐TPE were improved as the permanent chemical networks were introduced. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 868–874, 2000     

New Interpenetrating Polymer Networks of N-isopropylacrylamide/ N-acryloxysuccinimide: Synthesis and Characterization

Interpenetrating polymer networks (IPNs) based on poly (N-isopropylacrylamide), PNIPAAm, and poly (N-acryloxysuccinimide), PNAS, were prepared by a sequential method; the PNIPAAm which was polymerized and crosslinked by gamma irradiation, was swelled in a solution of PNAS/polylysine, which function as crosslinking agent for this monomer and as anchoring element of vesicles. The thermosensitivity properties (limit swelling time, lower critical solution temperature (LCST) and water retention), chemical composition (FTIR and elemental analysis), thermal properties (DSC and TGA) and morphology (SEM) were studied to characterize the IPNs.     

Mechanical property and swelling behavior of semi-interpenetrating polymer networks based on polyvinyl alcohol and polyurethane

We have studied the mechanical property and swelling behavior of semi-interpenetrating polymer networks (semi-IPNs) of poly(vinyl alcohol) (PVA) and polyurethane (PU) with reactive groups under different experimental conditions. Tensile strength and elongation of these semi-IPNs are strongly dependent on the composition of IPNs and degree of PU crosslinking. It is clear that the composition of PVA and PU forms different IPNs morphology, which would determine the final mechanical property. The experimental results also demonstrate that the degree of crosslinking, which is controlled by heat treating temperature time, and amount of reactive groups, affects the swelling behavior of IPNs. With a change in the degree of crosslinking, the degree of swelling of IPNs is also different. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 473–479, 1998     

Crosslinking of cotton in the presence of poly(vinyl alcohol). Analysis and composition of products

The spectrophotometric method developed by Finley for the determination of poly(vinyl alcohol) in paper coatings has been adapted for analysis of cotton fabrics crosslinked with finishes containing a poly(vinyl alcohol) additive. The effect of time and pH of hydrolysis on the analysis, and the dependency of the durability of the poly(vinyl alcohol) on the crosslinking agent are established. Evidence of chemical attachment to the cellulose of the cotton fiber through the crosslinking agent is offered.     

Crosslinking of poly(silyl ester)s containing fumaryloxyl units in the main chain and characteristics of the crosslinked products

Two unsaturated poly(silyl ester)s that contained innoxious fumaryloxyl units in the main chain were prepared by the polycondensation reaction of 1,5‐dichloro‐1,1,5,5‐tetramethyl‐3,3‐diphenyltrisiloxane or 1,3‐dichlorotetramethyldisiloxane with di‐tert‐butyl fumarate under nitrogen at 100°C for 1–3 days. To investigate the crosslinking reaction of the unsaturated poly(silyl ester)s, the two unsaturated poly(silyl ester)s were crosslinked in the presence of 2,2′‐azobisisobutyronitrile as a radical initiator. After the crosslinking, the unsaturated poly(silyl ester)s, which were viscous liquids, turned into solid products. The characterization of the two poly(silyl ester)s and the crosslinked products included infrared spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. Comparisons were made between the linear poly(silyl ester)s and the crosslinked poly(silyl ester)s. After the crosslinking, the important resonance signal for ethenylene (C?C) disappeared, and this showed that the crosslinking reaction was carried out progressively. The glass‐transition temperatures of the crosslinked poly(silyl ester)s were higher than those of the uncross‐ linked poly(silyl ester)s, and the thermal stability of the crosslinked poly(silyl ester)s was better than that of uncrosslinked poly(silyl ester)s. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1221–1225, 2007     

Effect of gamma irradiation on the interpenetrating networks of gelatin and polyacrylonitrile: Aspect of crosslinking using microhardness and crosslink density measurements

The present article reports the effect of gamma irradiation on the hardness behavior of the interpenetrating polymer networks (IPNs) of gelatin and polyacrylonitrile (PAN). Various compositions of gluteraldehyde‐crosslinked gelatin and N, N′‐methylene bis acrylamide (MBA)‐crosslinked PAN were prepared and investigated for microhardness studies. The pre‐ and post‐irradiated IPNs were characterized for their crosslinking density, determined with swelling ratio measurements. It was found that the crosslinked IPNs get further hardened because of radiational hardening at specific doses in the range from 2 to 250 kGy. The role of acrylonitrile and crosslinker (MBA) in the IPNs, as a consequence of irradiation, has also been explained. A fair consistency has been observed between the microhardness results and crosslinking density measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2581–2586, 2006     

Characterization of hydrogels based on chitosan and copolymer of poly(dimethylsiloxane) and poly(vinyl alcohol)

Copolymers composed of poly(vinyl alcohol) (PVA) and poly(dimethylsiloxane) (PDMS) were crosslinked with chitosan to prepare semi‐interpenetrating polymer network (IPN) hydrogels by an ultraviolet (UV) irradiation method for application as potential biomedical materials. PVA/PDMS copolymer and chitosan was cast to prepare hydrogel films, followed by a subsequent crosslinking with 2,2‐dimethoxy‐2‐phenylacetophenone as a nontoxic photoinitiator by UV irradiation. Various semi‐interpenetrating polymer networks (semi‐IPNs) were prepared from different weight ratios of chitosan and the copolymer of PVA/PDMS. Photocrosslinked hydrogels exhibited an equilibrium water content (EWC) in the range of 65–95%. Swelling behaviors of these hydrogels were studied by immersion of the gels in various buffer solutions. Particularly, the PCN13 as the highest chitosan weight ratio in semi‐IPN hydrogels showed the highest EWC in time‐dependent and pH‐dependent swelling. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2591–2596, 2002     

Elaboration of ion‐exchange membranes with semi‐interpenetrating polymer networks containing poly(vinyl alcohol) as polymer matrix

Ion‐exchange membranes were prepared with semi‐interpenetrating networks (s‐IPNs) by mixing a film‐forming polymer, poly(vinyl alcohol) (PVA), for the crosslinked matrix and a polyelectrolyte for the specific ion‐exchange property. Poly(sodium styrenesulfonate) (PSSNa), poly(styrenesulfonic acid) (PSSH), and poly(acrylic acid) (PAA) were used as anionic polyelectrolytes. Polyethyleneimine (PEI), poly(1,1‐dimethyl‐3,5‐dimethylenepiperidinium chloride) (PDDPCl), and poly(diallyldimethylammonium chloride) (PDDMACl) were used as cationic polyelectrolytes. Membranes with PVA 60% and polyelectrolyte 40% showed the best compromise among mechanical, homogeneous, and ion‐exchange properties. Gaseous dibromoethane was used as a crosslinking agent to form the PVA network and for efficient entrapment of the polyelectrolyte in the membrane. The crosslinking time (tc) was optimized for each type of membrane and its influence was studied by thermogravimetric analysis of the sample and scanning electron microscopy observations. The best results (large ion‐exchange capacity and small swelling ratio) were obtained for PVA/PAA and PVA/PSSNa/PSSH membranes. Among anion‐exchange membranes, PVA/PEI gave the best permselectivity (low co‐ion leakage) and the highest ion‐exchange capacity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1572–1580, 2002; DOI 10.1002/app.10420     

Effect of PVA content on morphology,swelling and mechanical property of crosslinked chitosan/PVA nanofibre

Abstract

Crosslinked chitosan/poly(vinyl alcohol) nanofibres were successfully prepared via electrospinning technique with heat mediated chemical crosslinking. The structure, morphology and mechanical properties of nanofibres were characterised by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), and tensile tester respectively. The SEM images demonstrated that crosslinked nanofibres exhibited a smooth surface and regular morphology. With increasing PVA, swelling of nanofabric increased. The mechanical properties of the fibre mats, as determined in a static tensile test, improved with increasing PVA composition owing to strong interaction between chitosan and poly(vinyl alcohol) molecular resulted from intermolecular hydrogen bonds. The crosslinked chitosan/poly (vinyl alcohol) nanofibrous mats have potential use as artificial skin and other tissue scaffold materials.     

Factors affecting the miscibility of simultaneous IPNs and pseudo-IPNs

We present experimental data in support of the principal factors promoting enhanced miscibility of interpenetrating polymer networks (IPNs). These are the match of rates of the crosslinking reactions producing the IPNs, and minimizing the difference in solubility parameter and glass transition temperature of the linear chain components. Long-lived, metastable pseudo-IPNs can be produced if the concentration of the linear component is not too large and the molecular weight is sufficiently large. We also briefly describe the behavior of crystalline linear, syndiotactic polystyrene (syn-PS) and linear isotactic PS as components in pseudo-IPNs of crosslinked atactic PS and poly(methyl methacrylate).     

Crosslinking of rigid poly(vinyl chloride) with epoxysilane

Crosslinking is an effective way to improve the properties of poly(vinyl chloride). A crosslinking agent consisting of R‐glycidoxypropyltrimethoxysilane (KH560) has been used for the first time in order to introduce crosslinking into rigid poly(vinyl chloride). Different thermal stabilizers (organotin, Ca/Zn stearate, and Ba/Zn stearate) as well as sodium bisulfite were tried in order to promote grafting of the epoxy group and enhance the degree of crosslinking. Fourier transform infrared (FTIR) spectra showed that grafting and crosslinking of KH560 with poly(vinyl chloride) could take place, and that a gel content of 40% could be obtained when more than 10 phr of epoxysilane was used with a 2:1 (weight) ratio of BaSt₂/ZnSt₂ and a 1:1 molar ratio of NaHSO₃/KH560, while premature crosslinking was avoided. The Vicat softening temperature of crosslinked PVC could be increased by about 10°C when 5 phr of epoxysilane was added, and thermal degradation could be delayed with increasing gel content. Therefore, epoxysilane‐crosslinked PVC has the potential for extensive applications. J. VINYL ADDIT. TECHNOL., 13:103–109, 2007. © 2007 Society of Plastics Engineers.     

Epoxylsilane crosslinking of rigid poly(vinyl chloride)

Crosslinking is an effective way to improve the qualities of poly(vinyl chloride). A crosslinking system consisting of R‐glycidoxypropyltrimethoxysilane (KH560) has been first used to introduce crosslinking into rigid poly(vinyl chloride). Different thermal stabilizers (organotin, Ca/Zn stearate, and Ba/Zn stearate) as well as sodium bisulfite additive were tried to promote the grafting of epoxyl group and enhance the degree of crosslinking. FTIR spectra showed that grafting and crosslinking of KH560 with poly(vinyl chloride) could take place, and a gel content of 40% could be obtained when more than 10 phr epoxylsilanes were used in the condition of 2 : 1 (parts by weight) ratio of BaSt₂/ZnSt₂ and 1 : 1M ratio of NaHSO₃/KH560, while the premature crosslinking was avoided. Thermal properties had been studied. The results showed that the Vicat softening temperature of crosslinked PVC could be improved about 10°C when 5 phr epoxylsilane was added, and thermal degradation could be delayed with increase in gel content. Therefore, epoxylsilane‐crosslinked PVC will have the potential for extensive applications © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Influence of crosslinking methods toward poly(vinyl alcohol) properties: Microwave irradiation and conventional heating

In this study, crosslinking of poly(vinyl alcohol) (PVA) with tartaric acid, as crosslinker, is performed using microwave irradiation. A comparison between the properties of PVA crosslinked using microwave irradiation and conventional heating methods is also discussed. While the water absorption, tensile and thermal properties of PVA crosslinked by either of the methods are comparable, microwave irradiation took only one‐eighth (14 min) of the time compared to conventional heating. In comparison with PVA (42 MPa), the strength of PVA crosslinked with 35% TA increased to 145 and 153 MPa for conventional heating and microwave irradiation, respectively. Water absorption of crosslinked PVA film is successively reduced to less than 30% in comparison with PVA (～200%). Moreover, the crosslinked films are stable at higher temperatures in comparison with PVA. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46125.     

固化动力学对PU/VER同步互穿网络聚合物性能的影响

互穿网络聚合物(IPNs)是一种特殊的交联聚合物合金.本研究以聚氨酯(PU)和乙烯基酯(VER)预聚物为原料,在室温下合成了互穿网络聚合物.采用傅立叶红外光谱法跟踪了网络形成的动力学过程并进行半定量分析,研究了固化体系对互穿纲络聚合物的摩擦学性能、力学性能及光学性能等的影响.结果显示,两种预聚物在固化过程中虽遵循不同的聚合机理,却相互影响制约.通过改变引发剂和催化剂的配比得到的样品显示出不同特性.当VER引发剂的用量为0.75%,PU催化剂的用量为0.6%时,两网络可基本实现同步互穿;同步互穿网络聚合物显示出良好的耐磨性,在实验条件下涂层寿命可达28.81 min,且力学性能优异,在可见光波长范围内具有良好的透光性, 450 nm处的透光率可达85%.     

Modification of the mechanical and thermal properties of PVC by semi IPN formation with poly(butyl acrylate)

Semi1 and semi2 interpenetrating polymer networks of poly(vinyl chloride) PVC and in situ formed poly(butyl acrylate) (PBA) have been synthesized and characterized using diallyl phthalate (DAP) and ethylene glycol dimethacrylate (EGDM) as the crosslinkers of PVC and PBA, respectively. These two types of IPNs have been compared with respect to their mechanical and thermal properties. The semi1 IPNs displayed a decrease in their mechanical parameters and the physical properties as well, while in contrast, the semi2 IPNs exhibited a marginal increase in the corresponding values when compared to the crosslinked PVC in the case of semi1 IPN and linear PVC in case of semi2 IPN. The representative samples of semi1 and semi2 IPNs revealed a two‐stage‐degradation typical of PVC while confirming the increased stability of the samples with higher onset temperature of degradation. The softening characteristics as detected by thermomechanical analysis are in conformity with their mechanicals. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Crosslinked blended poly(vinyl alcohol)/N-methylol nylon-6 membranes for the pervaporation separation of ethanol–water mixtures

Crosslinked blended membranes of poly(vinyl alcohol) (PVA) and N-methylol nylon-6 were prepared either by thermal crosslinking at 180°C or by chemical crosslinking with maleic acid. The pervaporation performance for the separation of ethanol–water mixtures of these membranes was investigated in terms of feed concentration, PVA content, and crosslinking agent content. The pervaporation performance of two differently crosslinked membranes was strongly influenced by the nature of the crosslinkage. Significant improvement in the pervaporation separation index can be achieved for chemically crosslinked membranes. From the comparison between the pervaporation and sorption tests, it is suggested that, for hydrophilic membranes, sorption properties dominate the pervaporation performance at feed solutions of higher water content, while diffusion properties govern at feed solutions of higher ethanol content. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 317–327, 1998     

Modification of poly(vinyl chloride) by IPN formation with poly(ethyl acrylate)

Semi‐1 and semi‐2 interpenetrating polymer networks (IPNs) of poly(vinyl chloride) (PVC) and in situ formed poly(ethyl acrylate) (PEA) have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PEA, respectively. These two types of IPNs have been compared with respect to their physical, mechanical, and thermal properties and an endeavor has been made to find a correlation of these properties with the morphology generated in these systems. The semi‐1 IPNs displayed a decrease in their tensile strength and modulus while in contrast; the semi‐2 IPNs exhibited a marginal increase with increasing crosslinked PEA incorporation. The semi‐1 and semi‐2 IPNs containing 10 and 30 wt % of PEA displayed a two‐stage degradation typical of PVC in their thermogravimetric and DSC studies while confirming the increased stability of the samples with higher percentages of PEA. The softening characteristics as detected by the extent of penetration of the thermomechanical probe as has been detected by thermomechanical analysis are in conformity with their mechanicals. The biphasic cocontinuous systems as explicit from the morphological studies reveal fibrillar characteristics in both the systems. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation and characterization of hydroxyl ion-conducting interpenetrating polymer network based on PVA and PEI

Novel interpenetrating polymer networks (IPNs) and semi-interpenetrating polymeric networks (sIPNs) based on polyethyleneimine (PEI) and poly(vinyl alcohol) (PVA) have been prepared via crosslinking reactions with respective crosslinking agent, 1,4-dibromobutane and glutaraldehyde (GA). IPNs, sIPNs and PEI/PVA blend membranes are characterized in detail by Fourier transform Infrared attenuated total reflection (FTIR-ATR) spectroscopy, mechanical properties, water uptake, swelling ratio, field emission scanning electron microscope (FE-SEM), hydroxide ion (OH^?) conductivity. Moderate water uptake and swelling ratio are obtained by the IPN derived from PEI:PVA (1:1), achieving 78.4 and 36.8 %, respectively. And the IPN also shows an acceptable OH^? conductivity of 4.87 mS/cm at 80 °C.