Determination of mono- and diglycerides in palm oil,olein and stearin

Partial glycerides are important constituents of palm oil and can have significant effects on the physical properties of products containing palm oil or on the fractionation of palm oil. A method is described for their routine determination in palm oil. By analysis of 28 weekly composite samples of crude palm oil the following results were obtained: free fatty acids, mean=3.76%, range 2.4 to 4.5%; monoglycerides, mean=0.28%, range 0.21 to 0.34%; diglycerides, mean=6.30%, range 5.3 to 7.7%. During detergent fractionation of palm oil, diglycerides concentrate in the palm olein, but monoglycerides concentrate in the palm stearin. Palm fatty acid distillate was found to contain approximately 3% each of mono- and diglycerides. Because the refining and fractionation processes are continuous in the refinery, it is not possible to follow a single identifiable batch of crude palm oil through the refinery. To circumvent this problem, crude palm oil, stearin and olein from the refinery were bleached and steam refined in the laboratory and the partial glyceride contents determined at each stage of processing. Except for fractionation, the content of glycerides did not change during processing. For oil, olein and stearin, monoglycerides were reduced significantly both after bleaching and after steam refining.     

Enzymatic interesterification of palm stearin and palm kernel olein

Palm stearin (POs) and palm kernel olein (PKOo) blends were modified by enzymatic interesterification (IE) to achieve the physical properties of margarine fats. POs and PKOo are both products of the palm oil industry that presently have limited use. Rhizomucor miehei lipase (Lipozyme IM 60) was used to catalyze the interesterification of oil blends at 60°C. The progress of interesterification was monitored by following changes in triacylglyceride composition. At 60°C interesterification can be completed in 5 h. Degrees of hydrolysis obtained through IE for all blends were decreased from 2.9 to 2.0 by use of dry molecular sieves. The solid fat contents of POs/PKOo 30:70 and 70:30 interesterified blends were 9.6 and 18.1 at 20°C, and 0 and 4.1 at 35°C, respectively. The slip melting point (SMP) of POs/PKOo 30:70 was 40.0°C before interesterification and 29.9°C after IE. For POs/PKOs 70:30, SMP was 47.7 before and 37.5°C after IE. These thermal characteristics of interesterified POs/PKOo blend ratios from 30:70 to 70:30 were comparable to those of commercial margarines. Results showed that IE was effective in producing solid fats with less than 0.5% trans.     

Effect of enzymatic transesterification with flaxseed oil on the high-melting glycerides of palm stearin and palm olein

The effects of enzymatic transesterification on the melting behavior of palm stearin and palm olein, each blended separately with flaxseed oil in the ratio of 90∶10 and catalyzed by various types of lipases, were studied. The commercial lipases used were Lipozyme IM, Novozyme 435, and myceliumbound lipases of Aspergillus flavus and A. oryzae. The slip melting point (SMP) of the palm stearin/flaxseed oil (PS/FS) mixture transesterified with lipases decreased, with the highest drop noted for the mixture transesterified with Lipozyme IM. However, when palm stearin was replaced with palm olein, the SMP of the palm olein/flaxseed oil (PO/FS) mixture increased, with the commercial lipases causing an increase of 41 to 48% compared to the nontransesterified material. As expected, the solid fat content (SFC) of the transesterified PS/FS was lower at all temperatures than that of the nontransesterified PS/FS sample. In contrast, all transesterified PO/FS increased in SFC, particularly at 10°C. Results from DSc and HPLC analyses showed that the high-melting glycerides, especially the tripalmitin of palm stearin, were hydrolyzed. Consequently, 1,3-dipalmitoylglycerol was found to accumulate in the mixture. There was no difference in the FA compositions between the transesterified and nontransesterified mixtures.     

Effect of chemical interesterification on triacylglycerol and solid fat contents of palm stearin,sunflower oil and palm kernel olein blends

Palm stearin (POs) with an iodine value of 41.4, sunflower oil (SFO) and palm kernel olein (PKOo) were blended in various ratios according to a three‐component mixture design and subjected to chemical interesterification (CIE). Triacylglycerol (TAG) and solid fat content (SFC) profiles of the chemically interesterified (CIEed) blends were analyzed and compared with those of the corresponding non‐CIEed blends. Upon CIE, extensive rearrangement of fatty acids (FA) among TAG was evident. The concentrations of several TAG were increased, some decreased and several new TAG might also have been formed. The changes in the TAG profiles were reflected in the SFC profiles of the blends. The SFC of the CIEed blends, except the binary blends of POs/PKOo which experienced an increase in SFC following CIE, revealed that they were softer than their respective starting blends. Randomization of FA distribution within and among TAG molecules of POs and PKOo led to a modification in TAG composition of the POs/PKOo blends and improved miscibility between the two fats, and consequently diminished the eutectic interaction that occurred between POs and PKOo.     

A quantitative determination of tocotrienols and tocopherols in palm oil by TLC-GLC

A reliable analytical method is required for determining tocopherols and tocotrienols in palm oil and palm oil fractions. This paper describes a TLC/GLC method which distinguishes between these compounds and is based on their separations from palm oils by saponification and TLC, followed by direct GLC analysis. Dedicated to professor E. Havina on the occasion of his retirement from the State University of Leyden, The Netherlands     

Physical properties of Pseudomonas and Rhizomucor miehei lipase-catalyzed transesterified blends of palm stearin:palm kernel olein

The physical properties of Pseudomonas and Rhizomucor miehei lipase-catalyzed transesterified blends of palm stearin:palm kernel olein (PS:PKO), ranging from 40% palm stearin to 80% palm stearin in 10% increments, were analyzed for their slip melting points (SMP), solid fat content (SFC), melting thermograms, and polymorphic forms. The Pseudomonas lipase caused a greater decrease in SMP (15°C) in the PS:PKO (40:60) blend than the R. miehei lipase (10.5°C). Generally, all transesterified blends had lower SMP than their unreacted blends. Pseudomonas lipase-catalyzed blends at 40:60 and 50:50 ratio also showed complete melting at 37°C and 40°C, respectively, whereas for the R. miehei lipase-catalyzed 40:60 blend, a residual SFC of 3.9% was observed at 40°C. Randomization of fatty acids by Pseudomonas lipase also led to a greater decrease in SFC than the rearrangement of fatty acids by R. miehei lipase. Differential scanning calorimetry results confirmed this observation. Pseudomonas lipase also successfully changed the polymorphic forms of the unreacted blends from a predominantly β form to that of an exclusively β′ form. Both β and β′ forms existed in the R. miehei lipase-catalyzed reaction blends, with β′ being the dominant form.     

Insight into thermal,crystallization kinetics,and phase behaviors of palm kernel oil and its olein/stearin by differential scanning calorimetry

The fractionation of oils has received considerable research attention, aiming at the modification of the properties of oils. The thermal and crystallization properties of palm kernel oil (PKO) and its olein/stearin (PKOL/PKST) were systematically investigated using differential scanning calorimetry (DSC). Based on the isothermal DSC results, crystallization temperature exerted critical effect on co-crystallization of PKOL and PKST. Moreover, it is reported that PKOL could be further separated by controlling the crystallization temperature, while PKST is hard to be further separated. The PKOL/PKST mixtures with different compositions were prepared and subjected to dynamic DSC analysis. The results illustrated that PKO meets the phase equilibrium of quasi-solid solutions.     

Transesterification kinetics of palm olein oil using supercritical methanol

Continuous transesterification of palm olein oil using supercritical methanol was investigated in the absence of a catalyst. The variables studied were reaction temperature (270–350 °C), pressure (20–40 MPa), and residence time (5–25 min), with a methanol-to-oil molar ratio of 40. Preheating at 245 °C was used to form a homogeneous phase in the absence of thermal decomposition of palm olein oil. The activation energies and reaction activation volumes of the fatty acid methyl ester (FAME), and those of the individual components (C16:0, C18:0, C18:1, and C18:2 methyl esters), were calculated. The entropies of activation (ΔS^‡) of the transesterification reactions were also obtained. As the transesterification of vegetable oil in supercritical methanol included a strongly negative (−175 J/mol K) entropy of activation, transesterification required harsh conditions.     

Crystallization kinetics of palm stearin in blends with sesame seed oil

This study investigates the crystallization kinetics of palm stearin (PS), a palm oil fraction, in blends with sesame seed oil. The results indicate that the crystallization behavior of PS in sesame oil is mainly associated with the crystallization of tripalmitin. Therefore, crystallization of blends of 26, 42, 60, and 80% (wt/vol) PS in sesame oil was described by equations developed for simpler systems (e.g., Fisher and Turnbull equation). The isothermal crystallization, melting profile, and fitting of the kinetics of nucleation to the Fisher and Turnbull equation showed that the 26, 42, and 60% PS/sesame oil blends crystallized mainly in the β₁′ polymorph state. In contrast, the 80% blend crystallized in two different polymorph states (i.e., β₁′ at T⪯307.6 K and β₁ at T≽308.2 K). The data indicated that, in spite of the higher concentration of PS in the 80% PS/sesame oil system, crystallization in the β₁ state required more free energy for nucleation (δG _c ) than β₁′ crystallization in the 26, 42, and 60% PS/sesame oil. At the low cooling rate used (1 K/min) it was observed that, for a particular PS blend, the higher the effective supercooling the higher the viscosity of the oil phase and the smaller the induction time of crystallization (T_i). Additionally, the β₁′ crystals from PS, developed at the highest effective supercooling investigated, were smaller than the β₁ crystals obtained at lower effective supercooling.     

TAG composition and solid fat content of palm oil, sunflower oil, and palm kernel olein belends before and after chemical interesterification

Modification of the characteristics of palm oil (PO), sunflower oil, and plam kernel olein (PKOo) according to conventional three-component mixture designs was undertaken by a combination of blending and chemical interesterification (CIE) techniques. TAG composition and solid fat content (SFC) profile of the starting blends were analyzed and compared with those of the interesterified blends. Upon CIE, extensive rearrangement of FA among TAG was evident. Concentrations of several TAG were increased, some were decreased, and several new TAG were formed. The resulting changes in TAG profile were reflected in the SFC of the blends. The SFC values of the chemically interesterified blends, except binary blends of PO/PKOo, revealed that they were softer than their respective starting blends. SFC data also indicated that eutectic interaction occurred between PO and PKOo in the starting blends and that this interaction was diminished after CIE.     

DSC study on the melting properties of palm oil, sunflower oil, and palm kernel olein blends before and after chemical interesterification

Changes in DSC melting properties of palm oil (PO), sunflower oil (SFO), palm kernel olein (PKOo), and their belends in various ratios were studied by using a combination of blending, and chemical interesterification (CIE) techniques and determining total melting (ΔH _f ) and partial melting (ΔH _i°C ) enthalpies. Blending and CIE significantly modified the DSC melting properties of the PO/SFO/PKOo blends. PO and blends containing substantial amounts of PO and PKOo experienced an increase in their DSC ΔH _f and ΔH _i°C following CIE. The DSC ΔH _f and ΔH _i°C of PKOo, blends of PO/SFO at 1∶1 and 1∶3 ratios, and all blends of PKOo/SFO significantly decreased after CIE. The DSC ΔH _f and ΔH _i°C of SFO changed little following CIE. Randomization of FA distribution within and among TAG molecules of PO and PKOo led to modification in TAG composition of the PO/PKOo blends and improved miscibility between the two fats and consequently diminished the eutectic interaction that occurred between PO and PKOo.     

A fourier transform infrared spectroscopic method for determining butylated hydroxytoluene in palm olein and palm oil

A simple, rapid, and direct FTIR spectroscopic method was developed for the determination of BHT content in refined, bleached, and deodorized (RBD) palm olein and RBD palm oil. The method used sodium chloride windows with a 50-mm transmission path. Fifty stripped oil samples of both RBD palm olein and RBD palm oil were spiked with known amounts of BHT concentrations up to 300 mg/kg (ppm). The data were separated into two sets for calibration and validation using partial least squares models. FTIR results for both oils correlated well with results obtained by the IUPAC HPLC-based method. For RBD palm olein, the coefficient of determination (R ²) was 0.9907 and the SE of calibration (SEC) was 8.47 ppm. For RBD palm oil, an R ² of 0.9848 and an SEC of 10.73 ppm were achieved. Because of the significant decrease in analysis time and reduction in solvent usage, this FTIR method for BHT is especially well suited for routine quality control applications in the palm oil industry.     

Analysis of corn oil for total tocopherols

Summary A method has been developed to overcome difficulties in the analysis of corn oil for tocopherol. The poor recovery of tocopherol added to corn oil prior to the Parker-McFarlane treatment does not occur with the present method, and the absorbance drift which occurs when crude corn oil reacts with iron and dipyridyl is largely eliminated. The intefering substance responsible for the drift did not distill appreciably in a molecular still at 170°C., and attempts to remove it from the oil by selective adsorption or solvent extraction were unsuccessful. It was extractable with dilute potassium hydroxide from a hexane solution of the oil and could be transferred from the alkaline extract to benzene. If the alkaline extract were acidified and then shaken with benzene, a much larger amount of the substance could be transferred. Extracts containing the substance showed strong absorption at wave-lengths between 290 and 315 millimicrons. Alkali treatment of the oil and subsequent adsorption on diatomacous earth reduced the content of interfering constituents to permit analyses for total tocopherol by the Emmerie-Engel method. By using this method, it was found that the oil from different corn inbreds and crosses varied over a six-fold range in tocopherol content. Presented at the fall meeting of the American Oil Chemists' Society, Chicago, Ill., September 24–26, 1956. Journal Paper No. 1051 of the Purdue University Agricultural Experiment Station, Lafayette, Indiana.     

Composition and thermal analysis of lard stearin and lard olein

Lard being an edible fat could be used in different forms in food systems. In this study, composition and thermal analysis of lard stearin (LS) and lard olein (LO) were undertaken to determine some common parameters which would enable their detection in food. A sample of native lard was partitioned into LS and LO using acetone as solvent and the fractions were compared to the original sample with respect to basic physico-chemical parameters, fatty acid and triacylglycerol (TAG) composition, and thermal characteristics. Although LS and LO displayed wider variations in basic physico-chemical parameters, thermal properties and solidification behavior, they do possess some common characteristic features with regard to composition. In spite of the proportional differences in the major fatty acids, both LS and LO are found to possess extremely high amount of palmitic (C16:0) acid at the sn-2 positions of their TAG molecules. Similar to native lard, both LS and LO contained approximately equal proportions of TAG molecules namely, linoleoyl-palmitoyl-oleoyl glycerol (LPO) and dioleoyl-palmitoyl glycerol (OPO). Hence, the calculated LPO/OPO ratio for LS and LO are comparably similar to that of native lard.     

Determination of free fatty acids in crude palm oil and refined-bleached-deodorized palm olein using fourier transform infrared spectroscopy

A rapid direct Fourier transform infrared (FTIR) spectroscopic method using a 100 μ BaF₂ transmission cell was developed for the determination of free fatty acid (FFA) in crude palm oil (CPO) and refined-bleached-deodorized (RBD) palm olein, covering an analytical range of 3.0–6.5% and 0.07–0.6% FFA, respectively. The samples were prepared by hydrolyzing oil with enzyme in an incubator. The optimal calibration models were constructed based on partial least squares (PLS) analysis using the FTIR carboxyl region (C=O) from 1722 to 1690 cm⁻¹. The resulting PLS calibrations were linear over the range tested. The standard errors of calibration (SEC) obtained were 0.08% FFA for CPO with correlation coefficient (R ²) of 0.992 and 0.01% FFA for RBD palm olein with R ² of 0.994. The standard errors of performance (SEP) were 0.04% FFA for CPO with R ² of 0.998 and 0.006% FFA for RBD palm olein with R ² of 0.998, respectively. In terms of reproducibility (r) and accuracy (a), both FTIR and chemical methods showed comparable results. Because of its simpler and more rapid analysis, which is less than 2 min per sample, as well as the minimum use of solvents and labor, FTIR has an advantage over the wet chemical method.     

Clarity of blends of double-fractionated palm olein with low-erucic acid rapeseed oil

Double-fractionated palm olein (DfPOo) fractions with iodine values (IV) of 60 and 65 were each blended with low-erucic acid rapeseed (LEAR) oil in various proportions. Clarities of the blends at different temperatures were determined. Maximum levels of DfPOo-IV60 and DfPOo-IV65 in blends that remained clear at 20°C for at least 120 d were 40 and 80%, respectively. At 15°C, the maximum levels were 10 and 40%, and at 10°C, 10 and 20%, respectively. At 5°C, only a blend of 10% DfPOo-IV65 in LEAR remained clear for 120 d. Maximum levels of DfPOo-IV60 and DfPOo-IV65 in blends that passed the cold test were 30% for both palm oleins. Maximum levels of the palm oleins in blends with LEAR were higher than those of blends with soybean oil. Cloud points were lower in palm olein/LEAR blends than those of palm olein/soybean oil blends, probably because LEAR contains less saturated fatty acids than soybean oil.     

Oxidative stability of blends and interesterified blends of soybean oil and palm olein

Improvement of oxidative stability of soybean oil by blending with a more stable oil was investigated. Autoxidation of blends and interesterified blends (9∶1, 8∶2, 7∶3 and 1∶1, w/w) of soybean oil and palm olein was studied with respect to fatty acid composition, fatty acid location and triacylglycerol composition. Rates of formation of triacylglycerol hydroproxides, peroxide value and volatiles were evaluated. The fatty acid composition of soybean oil was changed by blending. Linolenic and linoleic acids decreased and oleic acid increased. The triacylglycerol composition of blends and interesterified blends was different from that of soybean oil. Relative to soybean oil, LnLL, LLL, LLO, LLP, LOO and LLS triacylglycerols were lowered and POO, POP and PLP were higher in blends and interesterified blends (where Ln, L, O, P and S represent linolenic, linoleic, oleic, palmitic and stearic acids, respectively). Interesterification of the blends leads to a decrease in POO and POP and an increase in LOP. Linoleic acid concentration at triacylglycerol carbon-2 was decreased by blending and interesterification. Rates of change for peroxide value and oxidation product formation confirmed the improvement of soybean oil stability by blending and interesterification. But, blends were more stable than interesterified blends. Also, the formation of hexanal, the major volatile of linoleate hydroperoxides of soybean oil, was decreased by blending and interesterification.     

Trans-free vanaspati containing ternary blends of palm oil-palm stearin-palm olein and palm oil-palm stearin-palm kernel olein

Four samples of trans-free vanaspati were made using palm oil-palm stearin-palm olein (PO-POs-POo) blends (set A) and another four samples (set B) using palm oil-palm stearin-palm kernel olein (PO-POs-PKOo). Palm stearin iodine value [iodine value (IV), 30] and soft palm stearin (IV, 44) were used in this study. The products were evaluated for their physical and chemical properties. It was observed that most of the vanaspati were granular (grainy) and had a shiny appearance. Chemical analyses indicated that vanaspati consisting of PO-POs-POo had higher IV (47.7–52.4) than the PO-POs-PKOo vanaspati (37.5–47.3). The higher IV demonstrated by set A samples was due to their higher content of unsaturated fatty acids, 46.0–50.0% compared to 36.6–45.0% in set B. Decreasing the amount of palm oil while increasing palm stearin in the formulations resulted in higher slip melting points and higher yield values. Eutectic interaction was observed in PO-POs-PKOo blends. The β′ crystalline form was predominent in PO-POs-POo samples (set A). One formulation in set B exhibited β crystallinity. From the differential scanning calorimetry thermograms, samples in set B showed a high peak at the low-melting region as well as a high peak at the high-melting region. In set A, the peak at the low-melting region was relatively lower.     

Hydrolysis of used frying palm olein and sunflower oil catalyzed by porcine pancreatic lipase

The enzymatic hydrolysis of frying used vegetable oils with different degrees of alteration were measured using porcine pancreatic lipase (acylglycerol acylhydrolase EC 3.1.1.3). Successive frying of potatoes significantly increased the level of total polar lipid content in the palm olein from 9.3±0.1 mg/100 mg oil to 26.4±0.3 mg/100 mg oil after 90 fryings, and from 4.0±0.1 mg/100 mg oil to 27.7±0.3 mg/100 mg oil in sunflower oil after 60 fryings. Triacylglycerol polymers, triacylglycerol dimers, and oxidized triacylglycerols also increased 37-, 7.9-, and 7.5-times in palm olein, respectively, and 56-, 22-, and 4.7-times in sunflower oil, respectively. However, diacylglycerols and free fatty acid levels related to hydrolytic alteration did not increase with the number of fryings in both oils. The substrate concentration in the reactor was determined by calculating the molecular weight of each oil showing a different degree of alteration. We compared the methodology used by us and that used by other authors. The results show that the methods are reproducible and that the values obtained are in concordance with theoretical values. The kinetic parameters apparent Michaelis-Menten constant (K _M ^app ) and apparent maximum velocity of hydrolysis (V _max ^app ) were different in unused palm olein (5.1±0.7 and 166±7.6, respectively) than in sunflower oil (2.2±0.3 and 62±2.2, respectively). However, changes inK _M ^app andV _max ^app were not related to the degree of alteration of the oils.