Enhanced performance of dye-sensitized solar cells with novel 2,6-diphenyl-4H-pyranylidene dyes

Novel 2,6-diphenyl-4H-pyranylidene derivatives were designed and synthesized as dyes for dye-sensitized solar cells (DSSC). Dyes 2a, b with a phenyl substituent showed high DSSC energy conversion efficiencies of 5.3% (J_sc = 10.3 mA/cm², V_oc = 0.72 V, FF = 0.72) and 4.7% (J_sc = 8.9 mA/cm², V_oc = 0.73 V, FF = 0.72) at 100 mW/cm² under simulated AM 1.5 G solar light conditions. These values are twice better than that of dye 1 without the phenyl substituent under the same conditions. Both the photocurrent density (J_sc) and open circuit voltage (V_oc) of DSSCs based on dyes 2a, b are increased compared with 1. It can be attributed to their twisted structures, absorption abilities and proper energy levels. This result shows that the tetraphenylpyranylidene is a promising electron-donor unit for high-efficiency DSSCs.     

Relationship between HOMO energy level and open circuit voltage of polymer solar cells

A series of π-conjugated polymers (PDHF-BT and PDHF-TBT) with 4-(3,4-ethylenedioxythienyl)-2,1,3-benzothiadiazole (BT), 4,7-bis(3,4-ethylenedioxythienyl)-2,1,3-benzothiadiazole (TBT), and 9,9′-dihexylfluorene were synthesized by the Suzuki coupling reaction. The HOMO energy level of PDHF-BT was −5.47 eV, which was lower than that of PDHF-TBT (−5.22 eV), while the LUMO energy level of PDHF-BT (−3.45 eV) was very similar to that of PDHF-TBT (−3.42 eV). These energy levels of PDHF-BT and PDHF-TBT were also supported by a DFT calculation. The power conversion efficiency (PCE) of the polymer solar cell (PSC) with a structure of ITO/PEDOT:PSS/PDHF-BT:PCBM (1:1)/Al was determined as 0.34% and it was larger than that of the device based on PDHF-TBT (0.22%). Correspondingly, the V_oc of the PSC based on PDHF-BT (0.71 V) was much larger than that of the device based on PDHF-TBT (0.40 V). The results support that the V_oc of polymer based PSCs is strongly related to the HOMO energy level of the active polymers.     

Triphenylamine modified bis-diketopyrrolopyrrole molecular donor materials with extended conjugation for bulk heterojunction solar cells

Two new solution-processable enlarged π-conjugated donor–acceptor (D–A) organic small molecules consisting of dialkoxysubstituted benzo[1,2-b:4,5-b′]dithiophene (BDT) or dioctyltertthiophene (3T) as the central donor units, diketopyrrolopyrrole (DPP) as the acceptor unit and triphenylamine (TPA) as the terminal conjugated segment, TPA–DPP–BDT and TPA–DPP–3T, were designed and synthesized. Both small molecules possess broad absorption ranging from 300 to 800 nm with an optical band at approximately 1.50 eV and relatively low HOMO energy levels from −5.12 to approximately −5.16 eV. Expectedly, the UV–Vis absorption onset (810 nm) of TPA–DPP–BDT is largely red-shifted (60 nm) relative to that (750 nm) of previously reported BDT(TDPP)₂, which consists of BDT and DPP units. Unlike most of the TPA based molecules, strong molecular aggregation was observed in the solid state for both small molecules. In addition, atomic force microscopy (AFM) and X-ray diffraction (XRD) investigations indicated that TPA–DPP–3T and TPA–DPP–BDT exhibit good miscibility with fullerene derivatives. The organic solar cells based on TPA–DPP–BDT/PC₆₁BM(1:1) demonstrated power conversion efficiencies as high as 4.04% with a short-circuit current density (J_sc) of 11.40 mA cm⁻² and a fill factor (FF) of 53.2% when the active layer of the cell was annealed at 130 °C for 10 min.     

Molecular dipole,dye structure and electron lifetime relationship in efficient dye sensitized solar cells based on donor–π–acceptor organic sensitizers

In this work we report the synthesis and characterization of two new push–pull organic dyes (LC95 and LC107) to be employed as sensitizers in solar cells. Both molecules contain the bis(4-hexyloxyphenylamino)styril unit as the donor group, the cyanoacrylate acid as the acceptor, and the selenophene–thiophene (LC95 dye) and thiophene–selenophene (LC107 dye) moieties as the conjugated linkers. Dye sensitized solar cells employing these two photosensitizers and the cobalt(II/III) redox electrolyte exhibit good solar to energy conversion efficiencies of 6.3% and 6.5% measured under the 100 mW cm⁻² simulated AM1.5 sunlight. The efficiencies are slightly lower with the iodine/iodide electrolyte. The performance of these two dyes has been discussed and compared to three closely related sensitizers, i.e. C214, C216 and C218, by means of experimental measurements and quantum chemistry computations, with special attention to differences on their geometries, molecular dipoles and electron recombination lifetimes.     

Small molecules based on bithiazole for solution-processed organic solar cells

A series of donor-acceptor-donor small molecules (1-3) with bithiazole as acceptor unit, triphenylamine as donor unit and thiophene with different number (0, 1, 2) as bridge were synthesized by palladium(0)-catalyzed Suzuki or Stille coupling reactions. The thermal, optical, electrochemical, charge transport, and photovoltaic properties of these small molecules were examined. All compounds exhibit excellent thermal stability with decomposition temperatures (5% weight loss) over 390 °C in nitrogen atmosphere. As increasing the number of thiophene and π-conjugation length of molecule, the absorption maximum in film red shifts from 406 to 498 nm, the extinction coefficient increases from 1.35 × 10⁴ to 7.66 × 10⁴ M⁻¹ cm⁻¹, and the optical band gap decreases from 2.6 to 2.0 eV. The electron-donating thiophene and bithiophene in compounds 2 and 3 up-shift HOMO energy level from −5.42 (1) to −5.24 eV (2) or −5.22 eV (3), and down-shift LUMO energy level from −2.48 (1) to −2.84 eV (2) or −2.81 eV (3). The hole mobility of compound 3 is up to 3.6 × 10⁻⁴ cm² V⁻¹ s⁻¹, which is one order of magnitude higher than that of compound 2, but compound 1 shows no field-effect transistor performance. Solution-processed bulk heterojunction organic solar cells based on 1-3:PC₇₁BM (1:4, w/w) blend films exhibit increasing power conversion efficiency (up to 2.61%) as increasing thiophene unit number.     

Synthesis and characterization of triphenylamine flanked thiazole-based small molecules for high performance solution processed organic solar cells

Two new small molecules, 5,5-bis(2-triphenylamino-3-decylthiophen-2-yl)-2,2-bithiazole (M1) and 2,5-bis(2-triphenylamino-3-decylthiophen-2-yl)thiazolo[5,4-d]thiazole (M2) based on an electron-donor triphenylamine unit and electron-acceptor thiophene-thiazolothiazole or thiophene-bithiazole units were synthesized by a palladium(0)-catalyzed Suzuki coupling reaction and examined as donor materials for application in organic solar cells. The small molecules had an absorption band in the range of 300-560 nm, with an optical band gap of 2.22 and 2.25 for M1 and M2, respectively_. As determined by cyclic voltammetry, the highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels of M1 were −5.27 eV and −3.05 eV, respectively, which were 0.05 eV and 0.02 eV greater than that of M2. Photovoltaic properties of the small molecules were investigated by constructing bulk-heterojunction organic solar cell (OSC) devices using M1 and M2 as donors and fullerene derivatives, 6,6-phenyl-C61-butyric acid methyl ester (PC₆₁BM) and 6,6-phenyl-C71-butyric acid methyl ester (PC₇₁BM) as acceptors with the device architecture ITO/PEDOT:PSS/M1 or M2:PCBM/LiF/Al. The effect of the small molecule/fullerene weight ratio, active layer thickness, and processing solvent were carefully investigated to improve the performance of the OSCs. Under AM 1.5 G 100 mW/cm² illumination, the optimized OSC device with M1 and PC₇₁BM at a weight ratio of 1:3 delivered a power conversion efficiency (PCE) of 1.30%, with a short circuit current of 4.63 mA/cm², an open circuit voltage of 0.97 V, and a fill factor of 0.29. In contrast, M2 produced a better performance under identical device conditions. A PCE as high as 2.39% was recorded, with a short circuit current of 6.49 mA/cm², an open circuit voltage of 0.94 V, and a fill factor of 0.39.     

Influence of spatial arrangements of π-spacer and acceptor of phenothiazine based dyes on the performance of dye-sensitized solar cells

Three phenothiazine based organic dyes PTA, PDTA and PTDA with D–π–A, π–D–π–A and A–π–D–π–A frameworks were designed and synthesized for the dye sensitized solar cells (DSSCs). Phenothiazine with octyloxyphenyl moiety acts as donor while thiophene and cyanoacetic acid units act as a π-spacer and an acceptor, respectively. The effects of the molecular structures of the dyes on the performance of the DSSCs were investigated systematically along with their photophysical and photoelectrochemical properties. The dye PTDA with A–π–D–π–A framework exhibited a better light harvesting capacity and an effective electron extraction pathway from the electron donor to the TiO₂ surface, leading to an efficiency of 6.82% under 100 mW cm⁻² light illumination, while the dyes PTA and PDTA with D–π–A and π–D–π–A frameworks delivered efficiencies of 6.34% and 5.12%, respectively.     

Carbazole and benzimidazole/oxadiazole hybrids as bipolar host materials for sky blue,green, and red PhOLEDs

Two novel bipolar host materials (CBzIm and COxaPh) comprising of a hole-transport (HT) carbazole core functionalized with electron-transport (ET) moieties (benzimidazole/oxadiazole) at C3 and C6 positions have been synthesized. Their thermal, photophysical, electrochemical properties, and carrier mobilities were characterized. Theoretical calculations revealed that the HOMO orbitals were generally delocalized over the hole- and electron-transport moieties for both CBzIm and COxaPh, whereas the LUMO orbitals distribution only involved one benzimidazole moiety in CBzIm instead of fully delocalization over the whole polar moieties for COxaPh, which is consistent with the observation of good hole mobilities for both hosts and better electron mobility for COxaPh over CBzIm. CBzIm with high E_T (2.76 eV) is suitable to serve as a blue phosphor host, where a sky blue phosphor (DFPPM)₂Irpic exhibiting superior properties than those of popular blue emitter FIrpic was used to give highly efficient phosphorescent OLEDs, achieving a maximum external quantum efficiency (η_ext) of 15.7%. The better π-delocalization of COxaPh led to a lower triplet energy (E_T = 2.65 eV), which can be used to accommodate green and red phosphors, providing excellent device performance with η_ext as high as 17.7% for green [(ppy)₂Ir(acac)] and 20.6% for red [Os(bpftz)₂(PPh₂Me)₂], respectively.     

Optimizing the conjugation between N,N′-dicarbazolyl-3,5-benzene and triphenylphosphine oxide as bipolar hybrids for highly efficient blue and single emissive layer white phosphorescent OLEDs

Two bipolar host materials, mCPpPO and mCPmPO have been synthesized by Ni(II)/Zn-catalyzed cross-coupling of diphenylphosphine oxide and corresponding aryl bromide. The photophysical properties, HOMO/LUMO orbital distribution and triplet levels of these host materials are investigated and optimized by tuning the linking modes between electron acceptor triphenylphosphine oxide and electron donor N,N′-dicarbazolyl-3,5-benzene (mCP). When mCP is linked to the meta-position of benzene of triphenylphosphine oxide, the hybrid (mCPmPO) shows much higher steric hinderance than the para-position linked analogue (mCPpPO) so that it possesses a higher triplet energy. Equipped with the bipolar transport properties, mCPmPO-based blue PhOLED doped FIrpic shows a maximum current efficiency (η_c,max) of 40.0 cd/A, a maximum power efficiency (η_p,max) of 39.7 lm/W, corresponding the maximum external quantum efficiency (η_EQE,max) of 20.3%, and the current efficiency still maintain to 34.8 cd/A even at 1000 cd/m². Based on the optimized triplet energy level, the single emission layer white PhOLED hosted by mCPmPO shows η_c,max, η_p,max and η_EQE,max of 46.9 cd/A, 39.7 lm/W and 17.6%, respectively.     

Comparison of short and long wavelength absorption electron donor materials in C60-based planar heterojunction organic photovoltaics

Buckminsterfullerene, C₆₀-based planar heterojunction (PHJ) organic photovoltaics (OPVs) have been created using a short wavelength absorption (λ_max = 490 nm) electron-donating bis(naphthylphenylaminophenyl)fumaronitrile (NPAFN). NPAFN exhibits a hole mobility greater than 0.07 cm² V⁻¹ s⁻¹ as determined by its field-effect transistor. It can be attributed to such hole mobility that enables a thin layer (<10 nm) NPAFN in PHJ OPV, ITO/NPAFN/C₆₀/bathocuproine/Al. Because of the low lying HOMO energy level (5.75 eV) of NPAFN and relatively high ionization potential ITO (∼5.58 eV), such OPVs exhibit a very high open circuit voltage of ∼1.0 V, relatively high fill factor of 0.60, and a relatively high shunt resistance of 1100 Ω cm⁻², which all compensate for a relatively low short circuit current of 3.15 mA cm⁻² due to the short absorption wavelength and inferred short exciton diffusion length of NPAFN. Altogether, NPAFN OPVs display a power conversion efficiency (η_PC) of 2.22%, which is better than other long wavelength absorption materials in similar PHJ OPVs, such as pentacene (λ_max 670 nm, HOMO 5.12 eV, η_PC 1.50%) and copper phthalocyanine (λ_max 624, 695 nm, HOMO 5.17 eV, η_PC 1.43%).     

Effect of a novel self-assembly based on coordination polymer with zinc porphyrin in supramolecular solar cells

Within this work, we firstly report the self-assemblies of zinc porphyrin coordination polymers (CPs) appended isonicotinic acid ligands by metal–ligand axial coordination approach immobilized on the nanostructured TiO₂ electrode surfaces in photoelectrochemical devices. Compared to the assemblies based on zinc porphyrins integrated isonicotinic acid ligands via metal–ligand axial coordination or metal–ligand edged binding approach, the CPs-based assemblies exhibit significantly improved photovoltaic performances. Especially, the assembly based on iminazole-substituted zinc porphyrin coordination polymer exhibits an excellent photovoltaic performance with a short circuit photocurrent density (J_sc) of 3.8 mA cm⁻², an open circuit voltage (V_oc) of 0.31 V, a fill factor (FF) of 0.67 and an overall conversion efficiency (η) of 0.48% under AM 1.5 conditions. The results serve as another good testing ground for the fabrication of supramolecular devices techniques in future.     

Benzothiadiazole[1,2-b:4,3-b′]dithiophene,a new ladder-type multifused block: Synthesis and photovoltaic application

A new fused building block benzothiadiazole[1,2-b:4,3-b′] dithiophene (BTDT) was prepared by covalently locking thiophene unit on both sides of benzothiadiazole (BT). On the basis of this building block, a series of conjugated copolymers containing homopolymer (P1) or electron-rich comonomers such as carbazole (P2), benzodithiophene (P3 and P4) and thiophene (P5) were obtained. All polymers have good solubility in common organic solvents. The thermal, optical, electrochemical and photovoltaic properties of the polymers were investigated systematically. The thiophene units, which were covalently fastened to the BT moiety, enlarged the planarization of the polymer backbone and thus induced stronger intermolecular π–π interaction, meanwhile, decreased the electron-withdrawing ability of the BT unit. The device based on P3:PC₇₁BM exhibited a high open-circuit voltage (V_OC) of 0.96 V and moderate power conversion efficiency (PCE) of 2.16%.     

Triarylamine-based dual-function coadsorbents with extended π-conjugation aryl linkers for organic dye-sensitized solar cells

Triarylamine-based dual-function coadsorbents containing a carboxylic acid acceptor linked by extended π-conjugation aryl linkers (e.g., phenylene: HC-A3, naphthalene: HC-A4 and anthracene: HC-A5) were newly designed and synthesized. They were used as coadsorbents in organic dye-sensitized solar cells (DSSCs) based on a porphyrin dye (hexyloxy-biphenyl-ZnP-CN-COOH (HOP)). For comparison, the π-conjugated phenyl linker (HC-A3) previously developed by our group was also used as a coadsorbent. The structural effects on the photophysical and electrochemical properties and DSSC performance were systematically investigated. As a result, the DSSCs based on HC-A4 and HC-5 displayed power conversion efficiencies (PCEs) of 8.2% and 5.1%, respectively, while the HC-A3-based DSSC achieved a PCE of 7.7%. In the case of HC-A4, both the short-circuit photocurrent densities (J_sc) and open-circuit voltages (V_oc) of DSSCs were simultaneously improved to a large extent due to the more effective prevention of π−π stacking of organic dye molecules and the better light-harvesting effect at short wavelengths. The HC-A5-based DSSC exhibited a much lower short-circuit current (J_sc) and open-circuit voltages (V_oc) compared to the HC-A4-based DSSC, due to the fact that the dihedral angle of the π-conjugated linkers was too high for electron injection into the TiO₂ conduction band (CB) level. This had a reduced effect on preventing the π−π stacking of dye molecules, resulting in lower J_sc and V_oc values.     

Synthesis and photo-electrochemical properties of novel thienopyrazine and quinoxaline derivatives,and their dye-sensitized solar cell performance

Light absorption from visible to NIR region is required to increase the photocurrent and to enhance the photo-energy conversion efficiencies in dye-sensitized solar cells (DSSCs). We have now developed novel thienopyrazine dye TP1 which has absorption up to 700 nm. Quinoxaline dye QX2 with absorption at shorter wavelengths than TP1 has been synthesized for comparisons. The power conversion efficiencies of DSSCs with TP1 and QX2 showed 4.4% and 3.2%, respectively. The absorption edge in IPCE of TP1 reached 800 nm and the open circuit voltage (Voc) of QX2 was high (0.77 V). To improve the device performances, QX2 was used as a co-adsorbent dye with TP1. In the mixed sensitizer based DSSC, a high power conversion efficiency of 6.2% was achieved due to the effective light harvesting and steric effect of QX2.     

H-aggregation mode in triple-decker phthalocyaninato-europium semiconductors. Materials design for high-performance air-stable ambipolar organic thin film transistors

Two new tris(phthalocyaninato) europium complexes Eu₂(Pc)[Pc(OPh)₈]₂ (1) and Eu₂[Pc(OPh)₈]₃ (2) [Pc = unsubstituted phthalocyaninate; Pc(OPh)₈ = 2,3,9,10,16,17,23,24-octaphenoxyphthalocyaninate], were designed and synthesized. Introduction of different number of electron-withdrawing phenoxy substituents at the phthalocyanine periphery within the triple-decker complexes not only ensures their good solubility in conventional organic solvents, but more importantly successfully tunes their HOMO and LUMO levels into the range of air-stable ambipolar organic semiconductor required on the basis of electrochemical studies over both 1 and 2, meanwhile fine controlling of aggregation mode (H vs. J) in solution-based film for improving OTFT performance is also achieved. Measurements over the OTFT devices fabricated from these sandwich compounds by a solution-based quasi–Langmuir–Shäfer (QLS) method reveal their ambipolar semiconductor nature associated with suitable HOMO and LUMO energy levels. Due to the H-aggregation mode employed by the heteroleptic triple-decker molecules in the QLS film, excellent performances with the electron and hole mobility in air as high as 0.68 and 0.014 cm² V⁻¹ s⁻¹, respectively, have been revealed for the OTFT devices of heteroleptic triple-decker 1. This represents the best performance so far for solution-processable ambipolar single-component phthalocyanine-based OTFTs obtained under ambient conditions. In good contrast, homoleptic analogue 2 prefers to J-type aggregation and this results in relatively lower electron and hole mobility, around 0.041 and 0.0026 cm² V⁻¹ s⁻¹ in air, respectively, for the devices fabricated. In particular, the performance of the devices fabricated based on 1 was found to remain almost unchanged in terms of both the carrier mobilities and on/off ratio even after being stored under ambient for 4 months.     

A new multicolored and near-infrared electrochromic material based on triphenylamine-containing poly(3,4-dithienylpyrrole)

A new compound containing both 3,4-dithienylpyrrole (DTP) and triphenylamine (TPA) groups, namely, 4′-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)-N,N-diphenylbiphenyl-4-amine (DTP-Ph-TPA), was designed and synthesized. The polymer poly-DTP-Ph-TPA (PDTP-Ph-TPA) was prepared by electropolymerization from DTP-Ph-TPA. When the applied potential circulates from 0.0 V to 1.4 V, the polymer not only exhibits reversible multicolor in the visible region (yellow, light green, magenta and blue), but also shows excellent electrochromic properties in the NIR region with high contrast ratio (ΔT = 70.5% in 1550 nm, ΔT = 67.9% in 1310 nm) and a very short response time (about 1.4 s for 1550 nm, 0.9 s for 1310 nm). A single layer electrochromic device (ECD) based on polymer PDTP-Ph-TPA was constructed and characterized.     

Efficient blue emitters based on 1,3,5-triazine for nondoped organic light emitting diode applications

Two novel efficient blue emitters (TTT-1, TTT-2) containing 1,3,5-triazine, thiophene and triphenylamine have been designed and synthesized. Organic light emitting diodes (OLEDs) using these new triazine derivatives as emissive layers, ITO/TAPC (60 nm)/TTT-1 (Device A) or TTT-2 (Device B) (40 nm)/TPBi (60 nm)/LiF (1 nm)/Al (100 nm), were fabricated and tested. The OLEDs exhibited good performances with low turn-on voltage of 3 V, maximum luminance of ca. 8990 cd/m² for TTT-1 and 15,980 cd/m² for TTT-2, and maximum luminance efficiency of 4.7 cd/A for TTT-1 and 4.0 cd/A for TTT-2, respectively.     

A crystalline D-π-A organic small molecule with naphtho[1,2-b:5,6-b′]dithiophene-core for solution processed organic solar cells

In this work, we have designed and synthesized a new naphtho[1,2-b:5,6-b′]dithiophene-containing enlarged π-conjugated donor–acceptor (D–A) small molecule, NDT(TTz)₂, for use in solution-processed organic photovoltaics. NDT(TTz)₂, which contains a thiophene-bridged naphtho[1,2-b:5,6-b′]dithiophene as the central fused core and triphenylamine-flanked thiophene thiazolothiazole as a spacer, was synthesized via sequential Suzuki and Stille coupling reactions. The thermal, physiochemical, and electrochemical properties of NDT(TTz)₂ have been evaluated by differential scanning calorimetry, thermogravimetry, UV–Vis spectroscopy, photoluminescence spectroscopy, X-ray diffraction, and cyclic voltammetry. As desired for photovoltaic applications, NDT(TTz)₂ possesses good solubility, thermal stability, and a well-ordered, π–π stacked, crystallinity. The optical band gap and HOMO level of NDT(TTz)₂ were determined to be 2.0 eV and −5.23 eV, respectively. In addition to organic thin film transistor studies, application of NDT(TTz)₂ to preliminary photovoltaic devices has also been investigated by fabricating solution-processed bulk heterojunction solar cells together with PC₇₁BM in a typical layered device structure, ITO/PEDOT:PSS/NDT(TTz)₂:PC₇₁BM/LiF/Al. Without extensive optimization of the device, NDT(TTz)₂ in these devices shows a maximum power conversion efficiency of 1.44% under AM 1.5 illumination at a 100 mW/cm² intensity.     

Photovoltaic properties of low band gap copolymers based on phenylenevinylene donor and cyanovinylene 4-nitrophenyl acceptor units

Two novel copolymers P1 and P2 having phenylenevinylene donor and cyanovinylene 4-nitrophenyl acceptor units, were synthesized by heck coupling and employed as electron donor along with PCBM or modified PCBM (F) as electron acceptor for the fabrication of bulk heterojunction (BHJ) photovoltaic devices. These copolymers P1 and P2 showed broad band absorption around 640-700 nm and optical band gap of 1.60 eV and 1.72 eV, respectively. The highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) estimated from cyclic voltammetry measurement reveals that these values are well suitable for the use of these copolymers as electron donor along with PCBM derivatives as electron acceptor for BHJ active layer. The suitable LUMO off set allows efficient photo-induced charge transfer at the donor/acceptor interfaces in the BHJ photovoltaic device and resulting power conversion efficiency (PCE) of 2.8% and 3.29% for P1 and P2, respectively, when PCBM is used as acceptor. This value has been improved up to 3.52% and 4.36% for the devices based on P1 and P2 when F is used as electron acceptor, instead of PCBM. We have also investigated the effect of solvent annealing on the photovoltaic performance of device based on P1: F and P2: F blends and found that the over all PCE of the devices is 4.36% and 4.88%, respectively. The increase in PCE is mainly due to the improvement in the J_sc, which is due to the increased charge transport in the annealed device as compared to as cast device.     

Synthesis and characterization of a new perylene bisimide (PBI) derivative and its application as electron acceptor for bulk heterojunction polymer solar cells

A symmetrical perylene bisimide derivative (PBI) with 2-(4-nitrophenyl)acrylonitrile groups at the 1,7 bay positions of perylene and solubilizing cyclohexyl units was synthesized and characterized. The absorption spectrum of PBI was broad with the most prominent peak at 655 nm and optical band gap of 1.72 eV. The electrochemical investigation indicates that PBI has a LUMO energy level of −3.9 eV which is similar to that of PCBM or PC₇₀BM. Bulk heterojunction solar cell fabricated using a blend of poly(3-hexylthiophene) (P3HT) and PBI (1:1 w/w) as active layer cast from THF exhibited power conversion efficiency (PCE) at 1.56%. However, the device with P3HT:PBI blend deposited from mixed solvent (DIO/THF) improved the PCE to 2.78% which further increased to 3.17% on using the thermal annealed active layer. The improvement in the PCE is attributed to the enhanced crystallinity of the blend (particularly P3HT) and increase in hole mobility leading to balanced charge transport.