Radiographic changes in the first metatarsal head after distal chevron osteotomy combined with lateral release through a plantar approach

The purpose of this study was to evaluate the development of clinically significant avascular necrosis of the head of the first metatarsal after: (1) distal metatarsal osteotomy of the chevron configuration beginning apically at the center of the metatarsal head and extending into the head metatarsal neck junction and (2) release of the adductor hallucis muscle, the lateral capsulosesamoid ligament, and the lateral head of the flexor hallucis brevis via fibular sesamoidectomy in the majority of procedures (71/77). Although there were initial radiographic findings suspicious of avascular necrosis, subchondral lucencies (28 feet), mottling (40 feet), and focal lucencies (29 feet) in 76% of the feet, at final follow-up (12-43 months, average 25 months) this figure had fallen to 25%. The range of motion of the first metatarsophalangeal joint and articular symptoms were important in this study because of the assumption that these two parameters of evaluation would correspond to the severity of radiographic evidence of avascular necrosis. Only those patients (8 feet) with persistent mottling at final follow-up had a statistically significant decrease in the average range of motion (P = .013), with 51 degrees total arc of motion compared with 64 degrees total arc of motion for the remainder. There were no patients with persistent radiographic changes suggesting avascular necrosis who complained of pain.(ABSTRACT TRUNCATED AT 250 WORDS)     

Avascular necrosis of the first metatarsal head: incidence in distal osteotomy combined with lateral soft tissue release

The incidence of avascular necrosis of the metatarsal head following distal first metatarsal osteotomy combined with adductor tendon release has not been documented in a large series of patients. Of 82 consecutive procedures in 64 patients performed between 1986 and 1988, 42 patients (58 procedures) were available for clinical and radiographic examination. Average follow-up was 2.5 years (range 1.0-4.2 years). There were 35 L-shaped and 23 chevron osteotomies which were combined with a lateral soft tissue release that included adductor tenotomy. Preoperative hallux valgus angle averaged 25 degrees (range 15-40 degrees), and intermetatarsal angle averaged 12 degrees (range 5-24 degrees). Follow-up amount of correction averaged 13 degrees and 5 degrees, respectively. Eighty-four percent of patients were satisfied with their result. There was one case of avascular necrosis. The patient was asymptomatic at 4.2 years' follow-up, and the remaining patients included two with infections, one hallux varus, and no nonunions.     

Inherent stability of proximal first metatarsal osteotomies: a comparative analysis

Proximal first metatarsal osteotomies have been criticized for their instability leading to the dorsal displacement of the first metatarsal head. The purpose of this study was to compare inherent stability of fixated proximal oblique wedge and crescentic first metatarsal osteotomies against simulated vertical ground reactive forces. The authors evaluated four groups of 10 models each with various proximal osteotomy and fixation configurations. Group I was a control group of bone models without osteotomies; group II had oblique closing wedge osteotomies with one 2.7-mm, fully threaded, cortical screw fixation; group III had oblique closing wedge osteotomies with two 2.7-mm, fully threaded, cortical screw fixation; and group IV had proximal crescentic osteotomies with one 4.0-mm, partially threaded, cancellous screw fixation. All 40 bone models were stressed with simulated vertical ground reactive forces. Maximum load to achieve catastrophic failure was higher in the crescentic group (67.7 N, SD 15.1 N, p < or = .005), but the energy required to displace the osteotomy during the stressing sequence was higher in the two-screw oblique closing wedge osteotomy (390.6 N.mm, SD 153.4 N.mm, p < or = .01). The single-screw oblique closing wedge osteotomies showed the least ability to resist simulated vertical ground reactive forces (39.6 N, SD 19.1 N, p < or = .005).     

Vascularized partial first metatarsal transfer for the treatment of phalangeal osteomyelitis

In this double-blind, parallel-group, multicenter study, 169 patients with symptoms of maxillary sinusitis but without radiographically confirmed empyema (pus) were randomly assigned to receive either 500 mg azithromycin once daily for 3 days (87 patients) or placebo daily for 3 days (82 patients). Nasal secretion, maxillary tenderness and pain, nasal obstruction, general malaise, and hyposmia were assessed at the start of the study and on days 4, 11, and 25 of treatment. After 11 days 58% of the patients in the azithromycin group were cured versus 31% in the placebo group; after 25 days the cure rate was 79% versus 67%, respectively. When both cure and improvement were considered, the corresponding figures after day 25 were 90% and 88%, respectively. Adverse events, predominantly gastrointestinal, occurred in 24 (27%) of the azithromycin-treated patients and in 15 (18%) of those treated with placebo, but the difference was not statistically significant. There was a difference in efficacy in favor of azithromycin in the treatment of rhinitis with symptoms of maxillary sinusitis but without radiological signs of empyema (pus). Antibiotics should only be used to alleviate symptoms in patients with moderate to severe symptoms, as the results after 25 days for both improvement and cure are equal. In the treatment of acute rhinitis with symptoms and signs of maxillary sinusitis but without empyema, treatment with azithromycin seems to result in a better cure rate after 10-12 days when compared with placebo.     

Biomechanical topography of human articular cartilage in the first metatarsophalangeal joint

The objective of this study was to provide a map of cartilage biomechanical properties, thickness, and histomorphometric characteristics in the human, cadaveric first metatarsophangeal joint, to determine if normal articular cartilage was predisposed topographically to biomechanical mismatches in articulating surfaces. Cartilage intrinsic material properties and thickness were obtained from seven pairs of human, freshly frozen, cadaveric, metatarsophalangeal joints using an automated creep indentation apparatus under conditions of biphasic creep. Eight sites were tested: four on the metatarsal head, two on the proximal phalanx base, and one on each sesamoid bone to obtain the aggregate modulus, Poisson's ratio, permeability, shear modulus, and thickness. Cartilage in the lateral phalanx site of the left metatarsal head had the largest aggregate modulus (1.34 MPa), whereas the softest tissue was found in the right medial sesamoid (0.63 MPa). The medial phalanx region of the right joint was the most permeable (4.56 x 10(-15) meter4/Newton-second), whereas the medial sesamoid articulation of the metatarsal head of the left joint was the least permeable (1.26 x 10(-15) meter4/Newton-second). Material properties and thickness are indicative of the tissue's functional environment. The lack of mismatches in cartilage biomechanical properties of the articulating surfaces found in this study may be supportive of clinical observations that early degenerative changes, in the absence of traumatic events, do not occur at the selected test sites in the human first metatarsophalangeal joint.     

Can synthetic bone models approximate the mechanical properties of cadaveric first metatarsal bone?

The authors evaluated the value of plastic foam models for approximating the mechanical properties of cadaveric bone. Three mechanical tests (3-point bending, cantilevered load to failure, screw push-out) were performed to evaluate the performance of fresh (nonpreserved) human metatarsals, plastic solid foam anatomic models, and modified anatomic models. The test results indicate that plastic models may simulate the mechanical properties of natural bone in tests in which only elastic deformation is achieved. However, under circumstances where load is applied until material failure, the mechanical properties vary dramatically. These tests indicate that specific goals should be established with these results in mind, when planning mechanical testing studies with either plastic or cadaveric models.     

Overrepresentation of horizontal and vertical orientation preferences in developing ferret area 17

One of the fundamental principles of visual cortical organization is that neurons form a "map" in which neighboring cells have similar orientation preferences. Previous anatomical and imaging studies have shown that although the exact layouts of these orientation preference maps vary between individuals, features of iso-orientation domains such as width and spacing appear constant within a species. Using chronic optical imaging of intrinsic signals we now demonstrate that in ferret area 17 a larger proportion of cortical surface is dominated by responses to horizontal and vertical contours than to the two oblique orientations. This was true for all ferrets studied both during development and in adulthood. Interestingly, however, we found that the degree of the overrepresentation varied significantly between individual animals. In some young ferrets, responses to horizontal and vertical stimuli developed faster than responses to oblique stimuli, and a much larger percentage of the cortex responded preferentially to horizontal and vertical stimuli. In other individuals, responses to all stimuli developed at roughly the same rate, and there was relatively little overrepresentation of horizontal and vertical preferences.     

Radiographic assessment of equine interphalangeal joints asymmetry: articular impact of phalangeal rotations (Part I)

This study is part of a work to develop a radiographic method that defines objectively the individual conformation of an equine digit and its appropriate trimming. The authors used isolated distal limbs on a rotation support to study the influence of induced foot rotations on several angles measured from specific radiographs. The results of this work enabled the authors to quantify the rotation of the proximal phalanx compared to the distal, and to determine exactly the possible rotation in the distal interphalangeal joint. It was also observed that, faced with a forced rotation of the foot, the digit responded by a hoof plastic deformity, a distal interphalangeal intra-articular rotation and asymmetrical interphalangeal compressions.     

Perceptual plane geometry: Collinearity judgments probe the perceived orientation of an angle's sides.

40 Ss (primarily undergraduates) completed a task, which was to position a dot to lie 1 line length beyond the vertex of an angle by mentally extending 1 line segment forming the angle (and later the other line segment). Results indicate that 8 angles, variously oriented, provided judgmental errors attributable to the size of the subtended angle and line orientation. It is suggested that collinearity errors were consistent with the hypothesis that the sizes of all subtended angles are underestimated. Horizontal–vertical assimilation described the line-orientation effect. The largest error component was associated with the interaction of the 2 independent variables. Judgmental errors were modeled by a set of theoretically meaningful additive terms. Modeling was facilitated by symmetry assumptions (associated with odd and even mathematical functions) about the absolute magnitude and sign of judgmental errors that lead to the comparison of judgments derived from "interesting pairs" of stimuli. (17 ref) (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Loss of decorin from the surface zone of articular cartilage in a chick model of osteoarthritis

The objective of this study was to immunolocalize decorin and to assess changes as a result of pyridoxine (PN) deficiency in chick articular cartilage from femoral condyles. After maintenance on a normal diet for the first two weeks after hatching, 15 broiler chickens were deprived of this vitamin for 6 weeks. It was previously shown that the ankle joints of PN-deficient animals are swollen with effusions. They also present an abnormal gait, enlarged bony margins, and fissuring of the articular cartilages. Milder changes (no fissures) were also shown in the knee joints. Data from a previous study were suggestive that sulfated glycosaminoglycans are lost from the knee cartilage surface into synovial fluid. The current study was focused on the small proteoglycan, decorin, which coats the surface of collagen fibrils and may regulate their morphology. To examine decorin in normal and PN-deficient articular cartilage, a monoclonal antibody to an epitope on the protein core of decorin was used for immunohistochemical staining of tissue sections and for Western Blot analysis of cartilage extracts. Reduction of staining with the antibody was demonstrated in the tangential surface zone of PN-deficient cartilage, and Western Blot analysis showed reduced intensity of decorin bands compared to normal controls. These data suggest that a lack of decorin may play a role in the enlargement of collagen bundles in the tangential zone of PN-deficient articular cartilage as observed in a previous electron microscopic study.     

Radiographic analysis of hallux valgus in women on weightbearing and nonweightbearing

To investigate changes in the radiographic appearance during weightbearing in hallux valgus and to examine the importance of a weightbearing view, a comparative study was performed of accurate dorsoplantar radiographs of 108 symptomatic hallux valgus feet in 73 female patients and 100 normal feet in 69 females, which were taken weightbearing and nonweightbearing. The hallux valgus angle in the hallux valgus group increased on weightbearing, whereas that in the normal group decreased. The intermetatarsal angle between the first and second metatarsals increased on weightbearing in both groups. The degree of the changes of the angles was closely related with the degree of the hallux valgus deformity. The intermetatarsal angle between the fourth and fifth metatarsals decreased on weightbearing in the both groups. A weightbearing view is necessary to evaluate the structural configuration of hallux valgus, because muscle imbalance around the first metatarsophalangeal joint in hallux valgus causes an increase of a hallux valgus angle on weightbearing.     

Radiographic evaluation of osseous displacement following intra-articular fractures of the distal radius: reliability of plain radiography versus computed tomography

This study evaluated the reliability of plain radiography versus computed tomography (CT) for the measurement of small (< 5 mm) intra-articular displacements of distal radius fracture fragments. The plain radiographs and CT scans of 19 acute intra-articular distal radius fractures were used by 5 independent observers, using 2 standardized techniques, to quantify incongruity of the articular surface in a blinded and randomized fashion. Repeat measurements were performed by the same observers 2-4 weeks later, allowing determination of intraclass correlation coefficients (ICC) as a measure of intraobserver and interobserver agreement. The average maximum gap displacement on plain radiographs was 2.1 mm (range, 0.0-15.0 mm, lateral view) and on CT images was 4.9 mm (range, 0.7-17.3 mm, axial view). The average maximum step displacement on plain radiographs was 0.9 mm (range, 0.0-6.4 mm, lateral view) and on CT images was 1.2 mm (range, 0.0-6.0 mm, sagittal view). More reproducible values determining step and gap displacement were obtained when the arc method of measurement was used on CT scans (ICC values, .69-.97) as compared to the longitudinal axis method for plain radiographs (ICC values, .30-.50). For measured displacements of 2 mm or more, our data demonstrated poor correlation between measurements made on CT images and those made on plain radiographs (gap or step displacement > 2 mm, K = 0.21; step displacement > 2 mm, K = 0.21). Thirty percent of measurements from plain radiographs significantly underestimated or overestimated displacement compared to CT scan measurements. From these data, we conclude that CT scanning data, using the arc method of measurement, are more reliable for quantifying articular surface incongruities of the distal radius than are plain radiography measurements.