Solar thermal applications in the West Indies

Solar thermal devices have been used in the West Indian islands for over a century. Traditionally, crops such as rice or cocoa have been dried in the sun on drying floors. In the last twenty five years solar water heaters have become commercially available and over 30,000 are now in use in Barbados and about 2000 in Jamaica. Solar stills and solar crop dryers have also been deployed and solar collectors have been used to power solar cookers and adsorption chillers. Compound parabolic concentrating solar collectors have been used for experimental purposes but the high level of diffuse radiation obtained during most months of the year makes concentrating collectors unsuitable.     

Thermodynamic method for designing dryers operated by flat-plate solar collectors

In this work a thermal performance analysis of the solar drying process is presented. It describes semi-empirical models for the thermal characterization of an experimental indirect solar dryer device. A procedure for designing drying equipment, which takes into account the varying operating conditions given by the variations of the environmental conditions is also presented. On the other hand, a simplified method to design solar collectors based on the determination of minimum entropy generation during the thermal conversion of solar energy, is described. Finally, the results of the preliminary design of the solar dryer are presented using the thermal analysis procedure and the method derived from the Second law of thermodynamics.     

A review of solar dryers developed for grape drying

This paper attempts to review various solar dryers developed exclusively for grape drying on a normal scale. Many popular varieties of solar dryers, certain typical models as well as traditional methods practiced for drying grapes are presented in this paper. Technical and economical results have proved that solar drying of grapes is quite feasible. Commercialization of solar drying of grapes has not gained momentum as expected, may be due to high initial investment and low capacity of the dryers. Even, the farmer’s acceptance of solar dryers developed is not encouraging. Exhaustive research and development work has to be carried out in order to make solar drying of grapes economical and user friendly. There has been a remarkable achievement in solar drying of grapes due to sustained research and development associated with the adoption of advanced technologies. A review of various solar drying models for grapes is thus necessitated.     

The potential of solar industrial process heat applications

The temperature requirements of solar industrial process heat applications range from 60 °C to 260 °C. The characteristics of medium to medium-high temperature solar collectors are given and an overview of efficiency and cost of existing technologies is presented. Five collector types have been considered in this study varying from the simple stationary flat-plate to movable parabolic trough ones. Based on TRNSYS simulations, an estimation of the system efficiency of solar process heat plants operating in the Mediterranean climate are given for the different collector technologies. The annual energy gains of such systems are from 550 to 1100 kWh/m² a. The resulting energy costs obtained for solar heat are from 0.015 to 0.028 C£/kWh depending on the collector type applied. The viabilities of the systems depend on their initial cost and the fuel price. None of these costs however is stable but change continuously depending on international market trends and oil production rates. The costs will turn out to be more favourable when the solar collectors become cheaper and subsidisation of fuel is removed. Therefore the optimisation procedure suggested in this paper should be followed in order to select the most appropriate system in each case.     

太阳能光热低温利用发展与研究

太阳能具有分散性强、能流密度低、适合得到中低温热源的特性,太阳能低温热利用是人们最早认识和利用的太阳能转换手段,也是将来太阳能低成本、规模化应用的最重要的领域。本论文针对太阳能集热、太阳能采暖、太阳能干燥、太阳能热泵、太阳能空调、太阳能低温热发电等几个当前太阳能低温热利用的主要技术,介绍了各种技术的应用原理和背景,分析了各种已有技术的研究现状和社会需求,讨论了部分新技术的未来发展方向。同时介绍了中国科学技术大学在该领域的一些研究进展。     

Radiative Property of Absorbing Materials and its Collection Efficiency

Based on the previous research of the plate-type solar collector by the author, the analysis of the relationship between the spectral radiative property of the absorbing and transparent plates and their collector efficiency is firstly discussed on a simplified solar collector model. This analytical technique is then applied to evaluate the performance of water solar collector in practical use and the performance of five sorts of the commercial solar collectors are compared each other on both the collection efficiency and equilibrium temperature. Consequently, it is made clear that those solar collectors in Japan are of excellent quality of high collection efficiency.

Secondly, the performance of a unit-type air solar collector with carbon fiber sheet (CF-sheet) as the absorbing material, which was developed by the author in cooperation with a company, is analyzed and examined in the same way as above. Lastly, a large scale house-type air solar collector is tested, and this type of solar collector using carbon fiber' might be one of the most feasible methods to use solar energy in the industrial field including cost-performance.     

The energy subsidisation policies of Cyprus and their effect on renewable energy systems economics

In this paper, the energy subsidisation policies that are in effect in Cyprus are investigated with respect to their effect on renewable energy systems economics. Two subsidisation policies are investigated, those of renewable energy and fuels. These are contradictory, as one is in favour and the other is against the exploitation of renewable energies on the island, which is the declared Government policy. First, the policy measures are described and their effect on the economic viability of a solar system is investigated by means of an example. This concerns a solar industrial process heat system for which four types of collectors are considered. From the results presented it is clear that renewable energy subsidies create a positive impulse on renewable energies whereas the economic factors improve considerably when the subsidy for fuel is removed, as the expenditure made for the erection of a solar system replaces a more expensive fuel.     

直通式真空管空气集热器热性能实验及干燥应用

在直通式太阳能玻璃真空管空气集热器基础上改进联箱结构,并搭建测试平台对该种改进型空气集热器进行热性能实验研究。通过实验比较改进前后集热器的温升和效率,获得改进后集热器出口温度与太阳辐照度关系的线性回归方程,掌握不同空气质量流量对集热器出口温度和集热效率的影响规律,分析得到该种真空管的最佳串联个数,并对应用该种集热器的太阳能干燥系统的干燥效果进行初步测试分析。该研究结果可为太阳能空气集热干燥系统的设计及应用提供参考。     

Solar dryers in the Asia-Pacific region

The traditional method of solar drying in the Asia-Pacific region is by open-air drying where the product to be dried is exposed directly to the sun. The disadvantages of this traditional form of drying are many. Dirt, dust, and wind-blown debris, insect infestation, human and animal interference, will result in contamination of the product. Speed of drying and quality of dried product will be reduced due to over/under drying, intermittent sunshine, interruption and wetting by rain. Mechanical solar drying using natural convection or forced circulation would minimise these disadvantages. The author of this paper visited a number of countries and studied the numerous designs available for solar drying in the region. Three types of solar dryers considered by the author as having the best potential for development in the Asia-Pacific Region are discussed. These are the natural convection cabinet-type solar dryer, the forced convection indirect solar dryer, and the greenhouse-type solar dryer.     

Optimization of parabolic trough solar collector system

Process heat produced by solar collectors can contribute significantly in the conservation of conventional energy resources, reducing CO₂ emission, and delaying global warming. One of the major problems associated with solar process heat application is fluctuation in system temperature during unsteady state radiation conditions which may cause significant thermal and operation problems. In this paper a transient simulation model is developed for analysing the performance of industrial water heating systems using parabolic trough solar collectors. The results showed that to prevent dramatic change and instability in process heat during transient radiation periods thermal storage tank size should not be lower than 14.5 l m^?2 of collector area. Small periods of radiation instability lower than 30 min do not have significant effect on system operation. During these periods when water flow rate of collector loop is doubled the time required to restore system normal operating condition increased by a ratio of 1.5. Copyright © 2005 John Wiley & Sons, Ltd.     

无盖板渗透型太阳能空气集热器热性能的实验研究

无盖板渗透型太阳能空气集热器是一种易于实现建筑一体化的高效新风预热及干燥装置。为了掌握无盖板渗透型集热器在实际工况下的热性能,建造了集热面积为2.2 m2的太阳能空气加热系统实验台,并在2009年2月至2009年4月对其热性能进行了户外瞬态实验研究。实验结果表明出口空气温度随辐射强度的增加而升高,太阳辐射强度是影响集热器出口空气温度的最重要因素,而室外空气温度的影响极小。空气温升随风量的增加而减小,集热器热效率随风量的增加而增大。在三个测试日中集热器的平均热效率分别为58%、63%和72%,高于普通平板太阳能空气集热器。     

Heat storage for wood drying using solar heat

储热技术有利于提高太阳能的利用率,降低传统木材干燥的能耗,对木材工业的可持续发展具有重要意义。本文系统地阐述了储热技术的基本原理,简要介绍了其应用概况;结合国内外研究现状,分析了储热技术在木材太阳能干燥中的应用,并指出了储热技术在木材太阳能干燥中的发展趋势。     

An extensive review of various technologies for enhancing the thermal and optical performances of parabolic trough collectors

A wide range of engineering industrial applications require both the thermal and optical efficiencies of the system to be maximized with a reasonable low penalty for the friction factor and subsequently low losses in pressure. Among the family of concentrated solar power systems, parabolic trough collectors (PTCs), which have recently received significant attention, face similar challenges. The current work presents an extensive review of the PTC systems comparing recent and past technologies, which are widely being used to improve and enhance the thermal and optical efficiencies. Furthermore, the techniques used for single and two-phase flow modeling in numerical simulations, design variables, and experimental processes have been discussed in detail. The article also presents different numerical methods and analytical approaches of implementing the nonuniform solar distribution with different design parameters. Four main technologies are comprehensively addressed to effectively enhance the thermal performance of the PTCs; changing working heat transfer fluids, replacing the working fluids by nanofluids (single and hybrid) that have higher thermal–physical properties than those of base working fluids, inserting different tabulators with various design configurations, and finally combining the advantages of nanofluids and swirl generators in the same application. The article also critically summarizes the studies investigating the enhancement of thermal performance: use of novel design of PTCs and passive heat transfer enhancement techniques. Finally, a wide range of numerical and experimental studies are proposed for the future work related to the aforementioned main technologies.     

Design and testing of solar dryers for processing food wastes

This paper investigates the potential of using two solar dryers manufactured from locally available materials under Jordanian climatic conditions for drying food wastes for utilization as animal feed. The first dryer is a radiative–convective type while the second is a solar boiler dryer. Tests were also conducted to investigate the nutritious values of the dried products and their suitability as animal feed. It was found from tests that the solar boiler dryer is more efficient than the radiative–convective dryer for producing animal feed in terms of both quality and quantity. The nutritious values of the end products from the dryers were found to be within the international recommended values used for feeding chickens.     

Experimental comparison of solar drying based on evacuated tube collector with desiccant drying for dehydrating potato and ginger

In this article, a comparative study of different drying techniques, namely, open sun drying (OSD), desiccant drying, solar drying (SD), and solar drying with desiccant (SDWD) was done for drying potato and ginger. The thermal efficiency and air temperature differences of the solar dryer based on evacuated tube collectors were also examined. The average efficiency of the solar dryer was 29.01%. Average drying rates of OSD, desiccant drying, SD, and SDWD bed are 0.435, 0.435, 0.59, and 0.635 g/min. The moisture content of the potato was reduced from 79.6% to 32.9% by OSD, 32.6% by desiccant drying, 9.6% by SD, and 6.9% by SDWD. The moisture content of the ginger was reduced from its initial value of 82.3%–25.3% by OSD, 25% by desiccant drying, 10.1% by SD, and 3.2% by SDWD. SD assisted with a desiccant bed proved to be the best method for drying vegetables. Drying with desiccants is not feasible for drying in winter and spring seasons of the Indian climate.     

Thermal performance of a solar-assisted heat pump drying system with thermal energy storage tank and heat recovery unit

Thermal performance parameters for a solar-assisted heat pump (SAHP) drying system with underground thermal energy storage (TES) tank and heat recovery unit (HRU) are investigated in this study. The SAHP drying system is made up of a drying unit, a heat pump, flat plate solar collectors, an underground TES tank, and HRU. An analytical model is developed to obtain the performance parameters of the drying system by using the solution of heat transfer problem around the TES tank and energy expressions for other components of the drying system. These parameters are coefficient of performances for the heat pump (COP) and system (COPs), specific moisture evaporation rate (SMER), temperature of water in the TES tank, and energy fractions for energy charging and extraction from the system. A MATLAB program has been prepared using the expressions for the drying system. The obtained results for COP, COPs, and SMER are 5.55, 5.28, and 9.25, respectively, by using wheat mass flow rate of 100 kg h⁻¹, Carnot efficiency of 40%, collector area of 100 m², and TES tank volume of 300 m³ when the system attains periodic operation duration in fifth year onwards for 10 years of operation. Annual energy saving is 21.4% in comparison with the same system without using HRU for the same input data.