Two pyrazine derivatives as inhibitors of the cold rolled steel corrosion in hydrochloric acid solution

The inhibition effect of two pyrazine derivatives of 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M hydrochloric acid (HCl) was studied by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that both AP and ABP are good inhibitors, and inhibition efficiency follows the order: ABP > AP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. Potentiodynamic polarization curves show that two pyrazine derivatives act as mixed-type inhibitors. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability.     

Three pyrazine derivatives as corrosion inhibitors for steel in 1.0 M H2SO4 solution

The inhibition effect of three pyrazine derivatives of 2-methylpyrazine (MP), 2-aminopyrazine (AP) and 2-amino-5-bromopyrazine (ABP) on the corrosion of cold rolled steel (CRS) in 1.0 M H₂SO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that all pyrazine compounds are good inhibitors, and inhibition efficiency follows the order: ABP > AP > MP. The adsorption of each inhibitor on CRS surface obeys Langmuir adsorption isotherm. For all these pyrazine derivatives, they act as mixed-type inhibitors. The probable inhibitive mechanism is proposed from the viewpoint of adsorption theory.     

Benzimidazole and its derivatives as corrosion inhibitors for mild steel in 1M HCl solution

In this paper, the inhibition ability of benzimidazole and its derivatives against the corrosion of mild steel in 1M HCl solution was studied. The change of impedance parameters observed by variation of inhibitors concentration within the range of 50-250 ppm was an indication of their adsorption. The thermodynamic adsorption parameters proposed that these inhibitors retard both cathodic and anodic processes through physical adsorption and blocking the active corrosion sites. The adsorption of these compounds obeyed the Langmuir’s adsorption isotherm. The inhibition efficiency was increased with inhibitor concentration in the order of 2-mercaptobenzimidazole > 2-methylbenzimidazole > benzimidazole, which is in accordance with the variation of apparent activation energy of corrosion.     

Sodium tungstate as a corrosion inhibitor of cold rolled steel in peracetic acid solution

Sodium tungstate (Na₂WO₄) as a corrosion inhibitor of cold rolled steel (CRS) in peracetic acid (PAA) solution was investigated by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS). All the data obtained from the experiments indicate that Na₂WO₄ is capable of inhibiting the corrosion of CRS in PAA solution. Polarization data show that Na₂WO₄ behaves as an anodic type inhibitor in PAA solution. Adsorption of Na₂WO₄ is found to follow the Temkin adsorption isotherm. The calculated free energy of adsorption (ΔG_ads) probably indicates that both physical adsorption and chemical adsorption may take place in the adsorption process.     

Nitrotetrazolium blue chloride as a novel corrosion inhibitor of steel in sulfuric acid solution

The inhibition effect of nitrotetrazolium blue chloride (NTBC) on the corrosion of cold rolled steel (CRS) in 0.5 M H₂SO₄ was investigated by weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The results show that NTBC is a good inhibitor, and the adsorption of NTBC on CRS surface obeys Langmuir adsorption isotherm. Polarization curves show that NTBC acts as a mixed-type inhibitor. EIS spectra consist of large capacitive loop at high frequencies followed by a small inductive one at low frequency values, and charge transfer resistance increases with the inhibitor concentration.     

Acid violet 6B as a novel corrosion inhibitor for cold rolled steel in hydrochloric acid solution

The inhibition effect of acid violet 6B (AV6B) on the corrosion of cold rolled steel (CRS) in 1.0–5.0 M HCl solution was studied for the first time by weight loss, potentiodynamic polarization, and electrochemical impedance spectroscopy (EIS) methods. The results show that AV6B is a very good inhibitor in 1.0 M HCl, and the adsorption of AV6B on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that AV6B behaves as a mixed-type inhibitor. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability. Effects of immersion time and acid concentration on inhibition performance were also discussed.     

Triazolyl blue tetrazolium bromide as a novel corrosion inhibitor for steel in HCl and H2SO4 solutions

The inhibition effect of triazolyl blue tetrazolium bromide (TBTB) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solution was investigated for the first time by weight loss, potentiodynamic polarization curves, and electrochemical impedance spectroscopy (EIS) methods. The results show that TBTB is a very good inhibitor, and is more efficiency in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of TBTB on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that TBTB acts as a mixed-type inhibitor in both acids.     

Alizarin violet 3B as a novel corrosion inhibitor for steel in HCl, H2SO4 solutions

The inhibition effect of alizarin violet 3B (AV3B) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl and 0.5 M H₂SO₄ solutions was investigated for the first time by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that AV3B is a good inhibitor, and exhibits more efficient in 1.0 M HCl than 0.5 M H₂SO₄. The adsorption of AV3B on CRS surface obeys Langmuir adsorption isotherm in both acids. Polarization curves reveal that AV3B acts as a mixed-type inhibitor.     

Synergism between rare earth cerium(IV) ion and vanillin on the corrosion of cold rolled steel in 1.0 M HCl solution

The synergism between rare earth cerium(IV) ion and vanillin on the corrosion of cold rolled steel (CRS) in 1.0 M HCl solution was first investigated by weight loss, potentiodynamic polarization, ultraviolet and visible spectrophotometer (UV–vis), X-ray photoelectron spectroscopy (XPS) and atomic force microscope (AFM). The results revealed that vanillin had a moderate inhibitive effect, and the adsorption of vanillin obeyed the Temkin adsorption isotherm. For rare earth Ce⁴⁺, it had a negligible effect. However, incorporation of Ce⁴⁺ with vanillin significantly improved the inhibition performance, and produced strong synergistic inhibition effect. Depending on the results, the synergism mechanism was proposed.     

Inhibitory action of biodegradable modified vanillin on the corrosion of carbon steel in 1 M HCl

The effects of two biodegradable corrosion inhibitors derived from vanillin and aminophenol (Meta: VPAP and Para: VOAP) on the corrosion of carbon steel in 1 M HCl solution were examined. The efficiency of these inhibitors on carbon steel corrosion increased by increasing the concentration and decreased by increasing the temperature. The inhibitors adsorbed on carbon steel physically and obeyed the Langmuir isotherm. The potentiodynamic measurements showed mixed-type inhibitor. The geometry of the inhibitors showed that VPAP has slightly higher efficiency in corrosion inhibition than VOAP. The inhibitors showed good biodegradability in the environment within 28 days.     

Inhibition of the corrosion of steel in hydrochloric acid solution by some organic molecules containing the methylthiophenyl moiety

The corrosion inhibition effect of 2-[4-(methylthio) phenyl] acetohydrazide (HYD), 2-{[4-(methylthio) phenyl] acetyl} hydrazinecarbothioamide (TAD) and 5-[4-(methylthio) benzyl]-4H-1,2,4-triazole-3-thiol (TRD) on steel in 1.0 M HCl was investigated by mass loss and electrochemical methods. The effect of concentration, temperature and immersion time was studied. The results indicated that the compounds are efficient, mixed type and pursue Flory–Huggins adsorption isotherm. The inhibition efficiency at lower concentration of inhibitor decreased with temperature while at higher concentration, it is retained and the calculated free energy attributes this to comprehensive adsorption. The efficiency stands in the order TRD > TAD > HYD and is confirmed by the Quantum studies.     

Schiff bases of increasing complexity as mild steel corrosion inhibitors in 2 M HCl

The effect of three Schiff base compounds with increasing number of coordination sites, namely, 2-{(E)-[(2-hydroxyethyl)imino]methyl} phenol (I), 2-[(E)-({2-[(2-hydroxyethyl)amino]ethyl}imino)methyl]phenol (II) and 2,2′-{iminobis[ethane-2,1-diylnitrilo(E)methylylidene]}diphenol (III) have been investigated at 298 K by weight loss measurements, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) methods. The inhibition efficiencies obtained from all methods employed are in good agreement. Results show compound III to be the best inhibitor with a mean efficiency of 93% at 10⁻² M additive concentration. Studies showed all three compounds to act as mixed type inhibitors.     

Blue tetrazolium as a novel corrosion inhibitor for cold rolled steel in hydrochloric acid solution

The inhibition effect of blue tetrazolium (BT) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl solution at 20 °C was investigated by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) methods. The results show that BT is a very good inhibitor, and the adsorption of BT on CRS surface obeys Langmuir adsorption isotherm. Polarization curves reveal that BT acts as a mixed-type inhibitor. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability. The inhibition action of BT is also evidenced by SEM images.     

Synergistic inhibition effect of 6-benzylaminopurine and iodide ion on the corrosion of cold rolled steel in H3PO4 solution

The synergistic inhibition effect of 6-benzylaminopurine (BAP) and iodide ion (I⁻) on the corrosion of cold rolled steel (CRS) in 1.0 M H₃PO₄ solution was studied by weight loss, potentiodynamic polarization curves and electrochemical impedance spectroscopy (EIS) methods. The results show that BAP has a moderate inhibitive effect. However, incorporation of BAP with I⁻ improves the inhibition performance significantly. The adsorption of BAP in the absence and presence of I⁻ obeys Langmuir adsorption isotherm. BAP and BAP/I⁻ mixture act as mixed-type inhibitors. A probable synergism mechanism is proposed.     

The role of some thiosemicarbazide derivatives as corrosion inhibitors for C-steel in acidic media

Corrosion inhibition of C-steel in 2 M HCl was investigated in the absence and presence of different concentrations of some thiosemicarbazide derivatives namely, 1-ethyl-4(2,4-dinitrophenyl) thiosemicarbazide (I), 1,4-diphenylthiosemicarbazide (II), 1-ethyl-4-phenylthiosemicarbazide (III). Weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy techniques were employed. Impedance measurements showed that the double-layer capacitance decreased and charge-transfer resistance increased with increase in the inhibitors concentration and hence increasing in inhibition efficiency. Potentiodynamic polarization study showed that all the inhibitors act as mixed-type inhibitors. Results obtained reveal that the inhibition efficiency (%IE) follows the sequence: I > II > III. The adsorption of these compounds on C-steel surface obeys Temkin’s adsorption isotherm and has a chemisorptions mechanism.     

Inhibition effect of methyl violet on the corrosion of cold rolled steel in 1.0 M HCl solution

The inhibition effect of methyl violet (MV) on the corrosion of cold rolled steel (CRS) in 1.0 M HCl solution at 20-50 °C was studied by weight loss, potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM) methods. The results show that MV is an excellent inhibitor even with very low concentration, and the adsorption of MV on CRS surface obeys Langmuir adsorption isotherm. Potentiodynamic polarization curves reveal that MV behaves as a mixed-type inhibitor. EIS spectra exhibit one capacitive loop and confirm the inhibitive ability. The inhibition action of MV is also evidenced by SEM.     

Synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and anionic surfactant of sodium oleate (C₁₇H₃₃-COONa, SO) on the corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. The results revealed that SO had a moderate inhibitive effect, and the adsorption of SO obeyed the Freundlich adsorption isotherm. For the cerium(IV) ion, it had a negligible effect. However, incorporation of Ce⁴⁺ with SO significantly improved the inhibition performance, and produced strong synergistic inhibition effect. Depending on the results, the synergism mechanism was proposed.     

Synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye on the corrosion of cold rolled steel in H2SO4 solution

The synergistic inhibition effect of rare earth cerium(IV) ion and 3,4-dihydroxybenzaldehye (DHBA) on corrosion of cold rolled steel (CRS) in H₂SO₄ solution was first investigated by weight loss and potentiodynamic polarization methods. Effects of inhibitor concentration, temperature, immersion time and acid concentration on synergism are discussed in detail. The results reveal that DHBA has moderate inhibitive effect and its adsorption obeys Temkin adsorption isotherm. For the cerium(IV) ion, it has negligible effect. However, incorporation of Ce⁴⁺ with DHBA improves the inhibition performance significantly, and produces strong synergistic inhibition effect.     

Study of thioureas derivatives synthesized from a green route as corrosion inhibitors for mild steel in HCl solution

The behaviour of 1,3-dibenzylthiourea (DBTU) and 1-benzyl-3-diisopropylthiourea (DPTU) have been investigated as carbon steel corrosion inhibitors in HCl solution by weight loss measurements, potentiodynamic polarization curves, electrochemical impedance and scanning electron microscopy analysis. Quantum chemical calculation was applied to correlate electronic structure parameters of thiourea derivatives with their inhibition performances. DPTU results were slightly superior to those obtained in the presence of DBTU, showing that the replacement of one benzyl group for two isopropyl groups enhances the inhibitory properties. The 1,3-dibenzylurea derivative has also been studied in order to assess the importance of the sulphur atom to the inhibitory effect.     

Inhibition of mild steel corrosion in acid solution by Pheniramine drug: Experimental and theoretical study

Inhibition of mild steel corrosion in 1 M HCl solution by Pheniramine drug was studied using weight loss, electrochemical impedance spectroscopy, linear polarization resistance, and potentiodynamic polarization measurements. The values of activation energy (E_a) and different thermodynamic parameters such as adsorption equilibrium constant (K_ads), free energy of adsorption , adsorption enthalpy and adsorption entropy were calculated and discussed. The adsorption process of studied drug on mild steel surface obeys the Langmuir adsorption isotherm. Potentiodynamic polarization measurements showed that Pheniramine is mixed-type inhibitor. Further, theoretical calculations were carried out and relations between computed parameters and experimental inhibition efficiency were discussed.