首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 78 毫秒
1.
以过氧化苯甲酰(BPO)和N,N-二甲基苯胺(DMA)为引发剂,在1-丁基-3-甲基咪唑氟硼酸盐([bmim]BF4)离子液体中自由基聚合合成聚丙烯酰胺(PAM)。采用红外光谱对共聚物进行表征。通过单因素试验考察了各合成条件对聚合反应的影响,确定最佳工艺条件。在此条件下获得的聚合物特性粘数为8.5 m L/g。  相似文献   

2.
研究了4,4'-偶氮二[4-氰基戊酰(对-二甲基氨基)苯胺](ACPDA)/过氧化二苯甲酰(BPO)氧化还原引发体系在N,N-二甲基甲酰胺(DMF)中引发苯乙烯(St)的聚合及其动力学行为.考察了聚合反应温度、单体浓度、ACPDA浓度和BPO浓度对聚合物分子量和聚合反应速率的影响,测定了反应级数和聚合反应的活化能.实验结果表明:在一定范围内,聚合反应速率随单体浓度、ACPDA浓度、BPO浓度的增加和反应温度的升高而加快;聚合物分子量随单体浓度的增大而增大,随ACPDA浓度、BPO浓度的增大和反应温度的升高而降低.该体系具有氧化还原引发体系的特点,其聚合速率方程为Rp=K[St]1.52[ACPDA]0.56[BPO]0.49,聚合反应的表观活化能Ea =35.43 kJ/mol.  相似文献   

3.
以2-丙烯酰胺基-2-甲基丙磺酸(AMPS)和丙烯酰胺(AM)为原料,采用复合引发体系和绝热聚合相结合的方法在水溶液体系中合成磺化聚丙烯酰胺(SPAM),考察了单体质量分数、引发剂质量分数、单体配比、引发剂配比、pH值、聚合起始反应温度对聚合反应的影响。确定SPAM的最佳合成条件为:单体质量分数10%、引发剂质量分数0,15%、AMPS与AM质量比1.0:1、偶氮二异丁腈(AIBN)与氧化还原引发剂质量比4:1、pH值6、聚合起始反应温度40℃,在此条件下,制得的SPAM的分子量为6.13×10^6,其耐温抗盐性能明显优于采用单-氧化还原引发剂制备的SPAM及工业部分水解聚丙烯酰胺(分子量7×10^6)。  相似文献   

4.
刘存辉  石昀  刘洁  韩英波  周传臣  王志宏 《当代化工》2021,50(2):348-351,356
为进一步提高现有超高分子量聚丙烯酰胺的相对分子质量和黏度,研究了一种丙烯酰胺聚合反应的新型引发体系.该引发体系在原普通氧化还原引发体系基础上引入了高效链增长剂和引发催化剂,有效促进氧化还原反应效率,提升反应速率,在低加量下达到高效引发的效果,从而使聚合物分子链韧性得到大幅提升,提高聚合物相对分子质量和黏度.与原引发体系合成的超高分子量聚丙烯酰胺(3000万)相比,黏度提高15%,相对分子质量提高20%.  相似文献   

5.
聚丙烯酰胺类水溶性聚合物制备中分子量的控制   总被引:1,自引:0,他引:1  
聚丙烯酰胺类水溶性聚合物在油气开采过程中有着十分广泛的应用,其分子量的大小决定着产品的性能和用途。该类聚合物的合成一般采用自由基聚合,聚合反应中通过控制单体浓度、引发剂浓度、聚合反应温度可以调节聚合物的分子量。另外,通过选择引发体系、聚合工艺、适度交联以及添加链转移剂也可以达到控制聚丙烯酰胺类水溶性聚合物分子量的目的。  相似文献   

6.
阳离子聚丙烯酰胺是一种用途广泛的有机高分子聚合物,其分子量和阳离子度是决定其性能的重要指标。在氧化-还原引发体系中,以丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体共聚合成了阳离子型聚丙烯酰胺聚合物(CPAM),考察了反应温度、酸碱度、引发剂、单体及阳离子单体浓度等因素对CPAM分子量和阳离子度的影响。结果表明,较高分子量和阳离子度CPAM的最佳聚合条件为:聚合单体浓度为35%,阳离子单体的含量约15%,引发剂0.4%,反应体系温度35℃,pH值为6左右。  相似文献   

7.
来水利  杨宁 《应用化工》2011,40(5):860-863
以丙烯酰胺(AM)和甲基丙烯酰氧乙基三甲基氯化铵(DMC)为单体,在氧化还原引发体系中,通过水溶液聚合法合成了阳离子型聚丙烯酰胺聚合物(CPAM)。讨论了聚合单体质量分数、反应时间、反应体系温度、pH等因素对聚合反应的影响。结果表明,合成高分子量和阳离子度CPAM的最佳聚合条件为:聚合单体浓度为15%,引发剂0.06%,反应体系温度85℃,pH值为6左右,反应时间3 h。  相似文献   

8.
反相乳液聚合合成聚丙烯酰胺   总被引:1,自引:0,他引:1  
以甲苯为介质,Span80/Span20为乳化剂,叔丁基过氧化氢/亚硫酸氢钠氧化还原体系为引发剂,采用反相乳液聚合制备了分子量高达9.4×106的聚丙烯酰胺乳液。研究了乳化剂种类及用量、引发剂种类及用量、油水比、单体浓度,反应温度对共聚物相对分子量、聚合转化率以及聚合反应速率的影响。其最佳聚合配方及工艺条件为:油水体积比为1.4,单体浓度30%,引发剂用量0.003%,乳化剂用量12%,聚合温度30℃。  相似文献   

9.
聚丙烯酰胺的合成及性能   总被引:1,自引:0,他引:1  
以丙烯酰胺(AM)为单体,(NH_4)_2S_2O_8,NaHSO_3为氧化还原引发体系,采用水溶液聚合法制备聚丙烯酰胺(PAM)。研究了PAM的结构、性能和相对分子质量,同时考察了反应温度及单体、引发剂和链转移剂的质量分数对聚合反应转化率及PAM相对分子质量的影响。傅里叶变换红外光谱谱图中998 cm~(-1)处C=C双键的伸缩振动吸收峰消失以及在X射线衍射谱图中衍射角为20°~23°出现PAM特征弥散衍射峰,表明AM聚合生成了PAM。PAM热分解分3个阶段进行,其玻璃化转变温度随相对分子质量增大而升高。提高反应温度、增大引发剂和单体质量分数都可以提高单体转化率。升高反应温度、降低单体质量分数、增加引发剂和链转移剂质量分数均可以降低PAM的相对分子质量。  相似文献   

10.
丙烯酰胺(AM)和双丙酮丙烯酰胺(DAAM)在氧化还原引发体系过硫酸钾和亚硫酸钠的引发下,在水介质中以自由基聚合得到水溶性的聚丙烯酰胺-双丙酮丙烯酰胺(PAD),研究了引发剂种类、用量、反应温度、反应时间、单体投料比对聚合反应以及产物感光性能的影响,并对产物的结构进行了表征。结果表明,反应为恒比共聚,所合成的聚合物是AM和DAAM的交替共聚物。所合成的感光材料感光度高、分辨率高、工艺一致性好、易于实现工业化生产。  相似文献   

11.
12.
Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.  相似文献   

13.
14.
15.
16.
Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.  相似文献   

17.
In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.  相似文献   

18.
Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.  相似文献   

19.
收集了2007年7月~2008年6月世界塑料工业的相关资料,介绍了2007~2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.  相似文献   

20.
收集了2005年7月~2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、通用热固性树脂(酚醛、聚氨酯、不饱和树脂、环氧树脂)、特种工程塑料(聚苯硫醚、液晶聚合物、聚醚醚酮)的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号