A two-dimensional analytical-model-based comparative threshold performance analysis of SOI-SON MOSFETs

A generalized threshold voltage model based on two-dimensional Poisson analysis has been developed for SOI/SON MOSFETs.Different short channel field effects,such as fringing fields,junction-induced lateral fields and substrate fields,are carefully investigated,and the related drain-induced barrier-lowering effects are incorporated in the analytical threshold voltage model.Through analytical model-based simulation,the threshold voltage roll-off and subthreshold slope for both structures are compared for different operational and structural parameter variations.Results of analytical simulation are compared with the results of the ATLAS 2D physics-based simulator for verification of the analytical model.The performance of an SON MOSFET is found to be significantly different from a conventional SOI MOSFET.The short channel effects are found to be reduced in an SON,thereby resulting in a lower threshold voltage roll-off and a smaller subthreshold slope.This type of analysis is quite useful to figure out the performance improvement of SON over SOI structures for next generation short channel MOS devices.     

Analytical I–V model of SOI and SON MOSFETs: a comparative analysis

A generalised three-interface compact capacitive threshold voltage model for horizontal silicon-on-insulator/silicon-on-nothing (SOI/SON) MOSFET has been developed. The model includes different threshold voltage-modifying short-channel phenomena like fringing field, junction-induced 2D-effects, etc. Based on the threshold voltage model, an analytical current voltage model is formulated from the basic charge control analysis of MOSFET. In order to provide a better explanation to various observations and applicable to short-channel SOI and SON structures, the present current voltage model includes the effect of carrier velocity saturation and channel length modulation. Identical structures for both the devices, SOI and SON, are considered but for SON MOSFET, the buried oxide layer is replaced by air. The performance of the two devices are studied and compared in terms of threshold voltage roll-off, subthreshold slope, drain current and drain conductance. The SON MOSFET technology is found to offer devices with further scalability and enhanced performance in terms of threshold voltage roll-off, sub-threshold slope and greater current derivability, thereby providing scope for further miniaturisation of devices and much better performance improvement.     

FinFET design considerations based on 3-D simulation and analytical modeling

Design considerations of the FinFET have been investigated by three-dimensional (3-D) simulation and analytical modeling in this paper. Short-channel effects (SCE) of the FinFET can be reasonably controlled by reducing either silicon fin height or fin thickness. Analytical solution of 3-D Laplace's equation is employed to establish the design equations for the subthreshold behavior in the fully depleted silicon fins. Based on the 3-D analytical electrostatic potential in the subthreshold region, the threshold voltage (V/sub th/) roll-off and the subthreshold swing (S) are estimated by considering the source barrier changes in the most leaky channel path. V/sub th/ roll-off is an exponential function of the ratio of effective channel length to drain potential decay length, which can then be expressed as a function of the fin thickness, the fin height and the gate oxide thickness. The drain-potential decay lengths of single-gate fully depleted SOI MOSFET (FDFET), double-gate MOSFET (DGFET), rectangular surrounding-gate MOSFET (SGFET), and FinFET are compared. The drain potential scaling length and V/sub th/ roll-off can be included into a universal relation for convenient comparison.     

全耗尽异质栅单Halo SOI MOSFET二维模型

为了抑制深亚微米SOI MOSFET的短沟道效应,并提高电流驱动能力,提出了异质栅单Halo SOI MOSFET器件结构,其栅极由具有不同功函数的两种材料拼接而成,并在沟道源端一侧引入Halo技术.采用分区的抛物线电势近似法和通用边界条件求解二维Poisson方程,为新结构器件建立了全耗尽条件下的表面势及阈值电压二维解析模型.对新结构器件与常规SOI MOSFET性能进行了对比研究.结果表明,新结构器件能有效抑制阈值电压漂移、热载流子效应和漏致势垒降低效应,并显著提高载流子通过沟道的输运速度.解析模型与器件数值模拟软件MEDICI所得结果高度吻合.     

A new symmetrical double gate nanoscale MOSFET with asymmetrical side gates for electrically induced source/drain

In this paper, we present the unique features exhibited by a novel double gate MOSFET in which the front gate consists of two side gates as an extension of the source/drain. The asymmetrical side gates are used to induce extremely shallow source/drain regions on either side of the main gate. Using two-dimensional and two-carrier device simulation, we have investigated the improvement in device performance focusing on the threshold voltage roll-off, the drain induced barrier lowering, the subthreshold swing and the hot carrier effect. Based on our simulation results, we demonstrate that the proposed symmetrical double gate SOI MOSFET with asymmetrical side gates for the induced source/drain is far superior in terms of controlling the short-channel effects when compared to the conventional symmetrical double gate SOI MOSFET. We show that when the side gate length is equal to the main gate length, the device can be operated in an optimal condition in terms of threshold voltage roll-off and hot carrier effect. We further show that in the proposed structure the threshold voltage of the device is nearly independent of the side gate bias variation.     

A 2D sub-threshold current model for single halo triple material surrounding gate (SHTMSG) MOSFETs

In the proposed work analytical modeling of single halo triple material surrounding gate (SH-TMSG) MOSFET is developed. The threshold voltage and subthreshold current has been derived using parabolic approximation method and the simulation results are analyzed. The threshold voltage roll off is reduced and it denotes the deterioration of short channel effects. The results of the analytical model are delineated and compared with MEDICI simulation results and it is well corroborated.     

An analytical subthreshold current modeling of cylindrical gate all around (CGAA) MOSFET incorporating the influence of device design engineering

An analytical model of CGAA MOSFET incorporating material engineering, channel engineering and stack engineering has been proposed and verified using ATLAS 3D device simulator. A comparative study of short channel effects for various device structures has also been carried out incorporating the effect of drain induced barrier lowering (DIBL), threshold voltage lowering and degradation of subthreshold slope. The effectiveness of applying the three region doping profile concept in the channel such as high-medium-low and low-high-low and its comparison with Gaussian doping profile to the cylindrical GAA MOSFET has been examined in detail. Reduced SCEs have been evaluated in combined designs i.e. TM–GC–GS, GCGS and DM–GC–GS. Out of several design engineering, GC–GS CGAA gives nearly ideal subthreshold slope whereas TM–GC–GS CGAA provides overall superior performance to reduce SCEs in deep nano-meter. The results so obtained are in good agreement with the simulated data which validate the model.     

Subthreshold characteristics of fully depleted submicrometer SOIMOSFET's

In this paper, an analytic current-voltage model in the subthreshold regime for submicrometer fully depleted (FD) silicon-on-insulator (SOI) MOSFET's is presented. This model takes into account the dependence of the effective depleted charge on the drain bias and the voltage drop in the substrate region underneath the buried oxide. In addition to predicting accurate subthreshold current-voltage characteristics and subthreshold slope, this model can be used to predict important Short Channel Effects (SCE) such as the threshold voltage roll-off and Drain-Induced Barrier Lowering (DIBL). This model is verified by comparison to a two-dimensional device simulator, MEDICI. Good agreement is obtained for SOI channel lengths down to 0.25 μm     

Modeling the drain current and its equation parameters for lightly doped symmetrical double-gate MOSFETs

A 2D model for the potential distribution in silicon film is derived for a symmetrical double gate MOSFET in weak inversion. This 2D potential distribution model is used to analytically derive an expression for the subthreshold slope and threshold voltage. A drain current model for lightly doped symmetrical DG MOSFETs is then presented by considering weak and strong inversion regions including short channel effects, series source to drain resistance and channel length modulation parameters. These derived models are compared with the simulation results of the SILVACO (Atlas) tool for different channel lengths and silicon film thicknesses. Lastly, the effect of the fixed oxide charge on the drain current model has been studied through simulation. It is observed that the obtained analytical models of symmetrical double gate MOSFETs are in good agreement with the simulated results for a channel length to silicon film thickness ratio greater than or equal to 2.     

Highly suppressed short-channel effects in ultrathin SOI n-MOSFETs

We have investigated short-channel effects of ultrathin (4-18-nm thick) silicon-on-insulator (SOI) n-channel MOSFET's in the 40-135 nm gate length regime. It is experimentally and systematically found that the threshold voltage (V_th) roll-off and subthreshold slope (S-slope) are highly suppressed as the channel SOI thickness is reduced. The experimental 40-nm gate length, 4-nm thick ultrathin SOI n-MOSFET shows the S-slope of only 75 mV and the ΔV_th of only 0.07 V as compared to the value in the case of the long gate-length (135 nm) device. Based on these experimental results, the remarkable advantage of an ultrathin SOI channel in suppressing the short-channel effects is confirmed for future MOS devices     

High frequency analytical modelling and performance comparison of nanoscale SOI MOS structures

A generalized high frequency analytical model of nanoscale Semiconductor-On-Insulator (SOI) MOS structure, valid for different competitive nanoscale SOI MOS structures is developed. Interface roughness and trap-charge effects are incorporated in addition to different common short channel effects to make the model valid for SOI structures with non-native gate dielectrics. Analytical models for threshold voltage, current-voltage, conductance, cut-off frequency and noise factor have been derived starting from basic 2D Poisson’s equation with some innovative modifications. Performances of three competitive MOSFET structures – Silicon-On-Insulator (SiOI), Germanium-On-Insulator (GeOI) and Gallium arsenide-On-Insulator (GaOI) have been simulated and compared. It has been found that the overall performance of the structure is determined by combined effects of different material, structural and operation parameters, which may or may not improve the performance of the structure when considered individually. As an example, when higher channel mobility of GaAsOI tries to improve its performance, lower intrinsic carrier concentration, higher interface roughness, trap-charge etc. try to limit its performance. This work demonstrated that a trade-off or parameter optimization is vital for effective selection of one structure over others.     

A novel 0.1 μm MOSFET structure with inverted sidewall andrecessed channel

To solve the problems of trade-off between the short channel effect and the performance enhancement of sub-quartermicrometer MOSFETs, we have developed a recessed channel MOSFET structure called ISRC (Inverted-Sidewall Recessed-Channel). The oxide thickness is 4 nm and the effective channel length is 0.1 μm, which is the smallest Si-MOSFET ever reported in the recessed channel structures. The maximum saturation transconductance at V_D=2 V is 446 mS/mm for the 0.1 μm n-channel device. The threshold voltage roll-off is kept within 64 mV when the gate length varies from 1.4 μm to 0.1 μm and good subthreshold characteristics are achieved for 0.1 μm channel device     

Dual-Material Double-Gate SOI n-MOSFET: Gate Misalignment Analysis

The dual-material double-gate (DMDG) silicon-on-insulator (SOI) metal–oxide–semiconductor field-effect transistor (MOSFET) is the leading contender for sub-100-nm devices because it utilizes the benefits of both double-gate and dual-material-gate structures. One major issue of concern in the DMDG-MOSFET is the alignment between the top and the bottom gate that critically influences the device performance. In this paper, we have investigated the effects of gate misalignment in the DMDG SOI n-MOSFET. In this regard, analytical modeling and extensive simulations have been carried out to analyze the gate misalignment effects on device performance like surface potential, electric field, threshold voltage, subthreshold slope, drain-induced barrier lowering, drain current, and transconductance. Considering the fact that gate misalignment can occur on any side of the gate, both source- and drain-side misalignments have been discussed. Analytical and simulated results are found to be in good agreement, which authenticate our proposed model for the DMDG structure.      

Analytical threshold voltage model for cylindrical surrounding-gate MOSFET with electrically induced source/drain extensions

Physics-based analytical threshold voltage model for cylindrical surrounding-gate MOSFET with electrically induced source/drain extensions is presented. The effect of inversion carriers on the channel’s potential is considered in presented model. Using this analytical model, the characteristics of EJ-CSG are investigated in terms of surface potential and electric field distribution, threshold voltage roll-off, and DIBL. Results show that the application of electrically induced S/D extensions to the cylindrical surrounding-gate MOSFET will successfully suppress the hot-carrier effects, threshold voltage roll-off, and DIBL. It is also revealed that a moderate side-gate bias voltage, a small gate oxide thickness, and a small silicon channel radius are needed to improve device characteristics. The derived analytical model is verified by its good agreement with the three-dimensional numerical device simulator ISE.     

An analytical model for back-gate effects on ultrathin-film SOIMOSFET's

An analytical model including the semiconducting substrate effect for silicon-on-insulator (SOI) MOSFET threshold and subthreshold operation is presented. The potential drop across the substrate tends to reduce the front-gate threshold voltage as well as subthreshold swing. However, if the substrate or the back-gate surface is accumulated, the substrate effects can be neglected. Five comprehensive operation regions under various bias conditions are distinguished and discussed for the first time     

A one-dimensional analytical model for the dual-gate-controlledthin-film SOI MOSFET

A one-dimensional analytical model for dual-gate-controlled SOI MOSFETs is presented and applied to a stacked p-channel MOSFET fabricated by epitaxial lateral overgrowth (ELO). The authors found and modeled a nonlinear dependence of front-gate threshold voltage on back-gate voltage if threshold is defined by a constant current instead of a constant silicon-surface potential. It is demonstrated by comparison of subthreshold slopes that surface potentials are not pinned to the onset of strong inversion or accumulation. Accurate one-dimensional modeling is a necessity for device characterization and a precondition for general SOI models for circuit simulation     

Short-channel effect immunity and current capability ofsub-0.1-micron MOSFET's using a recessed channel

Sub-0.1-μm planar and gate recessed MOSFET's are investigated using both drift-diffusion and Monte Carlo simulations. In nonplanar devices, the influence of the gate corner explains that the threshold voltage roll-off can be almost suppressed. A steeper subthreshold slope (low swing) is also obtained for a channel length shorter than 50 nm when the recessed channel MOSFET is compared to its planar counterpart. The influence of the corner effect on high-current performances is also considered in relation with the electric field profile along the Si/SiO ₂ interface     

Fabrication of gate-all-around transistors using metal inducedlateral crystallization

Gate-all-around transistor (GAT) is demonstrated. The device can be fabricated on either a bulk silicon wafer or on the top of any device layers. The fabrication process used a new technique called metal-induced-lateral-crystallization (MILC) to recrystallize amorphous silicon to form large silicon grains in the active area. Using this technique, the transistor performance is comparable to a SOI MOSFET. Compared with the single-gate thin film transistor (SGT) and solid phase crystallization (SPC) devices, the MILC GAT has lower subthreshold slope, lower threshold voltage, higher transconductance and nearly double drive current, The impact of short channel length was investigated     

Cylindrical surrounding-gate MOSFETs with electrically induced source/drain extension

A novel cylindrical surrounding gate MOSFETs with electrically induced source/drain extension is proposed and demonstrated by numerical simulation for the first time. In the new device, a constant voltage is applied to the side-gate to form inversion layers acting as the extremely shallow virtual source/drain. Using three-dimensional device simulator, we have investigated the device performance focusing on the threshold voltage roll-off, the drain induced barrier lowering, the subthreshold swing, electrical field and carrier temperature. Based on our simulation results, we demonstrate that the proposed structure exhibits better suppression of short channel effects and hot carrier effects when compared to the conventional cylindrical surrounding gate MOSFETs.     

Simulation and two-dimensional analytical modeling of subthresholdslope in ultrathin-film SOI MOSFETs down to 0.1 μm gate length

The subthreshold slope in ultra-thin-film fully depleted SOI MOSFETs is investigated for channel lengths from the long channel region down to 0.1 μm. A doping effect is found which allows improvement of the S-factor by increasing the channel doping concentration. In order to explain this phenomenon and to clarify the mechanism of S -factor degradation at short gate lengths, a two-dimensional analytical model is developed. A modified boundary condition for the two-dimensional Poisson equation is introduced to account for the nonlinear potential distribution inside the buried oxide. It is found that the S-factor short-channel degradation is governed by three mechanisms: the rise of capacitances at the channel source and drain ends due to the two-dimensional potentional distribution; the subthreshold current flow at the back channel surface; and the modulation of the effective current channel thickness during the gate voltage swing in the subthreshold region. The analytical model results are compared to those of numerical device simulation, and a good agreement is found