Selective and Practical Oxidation of Sulfides to Diastereopure Sulfoxides: A Combined Experimental and Computational Investigation

We describe an effective oxidation of diltiazem (DTZ)‐like molecules (a class of prochiral sulfides with potential pharmacological properties) using m‐chloroperbenzoic acid (MCPBA) as oxidant either in dichloromethane or methanol. An excellent diastereomeric excess of one sulfoxide has been observed “in the absence of any chiral auxiliary”. The stereochemistry of the two diastereomeric sulfoxides has been determined by TDDFT simulations of the experimental electronic circular dichroism (ECD) spectra. A computational DFT study of the reaction mechanism shows that the attack of MCPBA on the two sulfide enantiotopic faces affords two preliminary complexes M1 and M1′. M1 is more stable than M1′ by 3.3 and 3.5 kcal mol⁻¹ in dichloromethane and methanol, respectively, and after equilibration its population must be dominant. Two diastereomeric pathways originate from M1 and M1′ and give two diastereomeric sulfoxides with R and S configurations at the new chiral sulfur, respectively. Since TS (the transition state originating from M1 ) is more stable than TS′ (the energy gap is 0.7 kcal mol⁻¹ in dichloromethane or methanol), following the Curtin–Hammett principle, the favoured path is the pro‐R channel ( M1 → TS→M2 ) affording the (R_c,R_s)‐ 2a′ product species in agreement with the observed diastereoselectivity. The M1 – M1′ and TS – TS′ energy gaps are actually determined by the difference in the hydrogen bond network that features the two species even if the approaching orientation of the two molecules is governed by the interactions between the π systems of oxidant and substrate aromatic rings. The diastereomeric ratio computed on the basis of the energy difference between TS and TS′ (0.7 kcal mol⁻¹) is 63:37, which must be compared to the experimental value 9:1. When we consider free energy differences (2.4 kcal mol⁻¹ in vacuum and 2.9 kcal mol⁻¹ in solution) this theoretical ratio becomes 85:15 and 89:11, respectively, in excellent agreement with the experimental value 9:1.     

Gold(I)‐Catalyzed Decarboxylation of Propargyl Carbonates: Reactivity Reversal of the Gold Catalyst from π‐Lewis Acidity to σ‐Lewis Acidity

A cationic gold(I)‐catalyzed decarboxylative etherification of propargyl carbonates to selectively produce propargyl ethers is reported. In the reaction the gold(I) catalyst shows a distinct σ‐Lewis acidity rather than the commonly observed π‐Lewis acidity, and thus catalyzes the decarboxylation of a variety of propargyl carbonates to give the corresponding propargyl ethers with high selectivity. This reaction represents a rare example of the tunable reactivity of cationic gold(I) complexes between σ‐Lewis acidity and π‐Lewis acidity.

     

Chemical Synthesis of Rare Natural Bile Acids: 11α‐Hydroxy Derivatives of Lithocholic and Chenodeoxycholic Acids

A method for the preparation of 11α‐hydroxy derivatives of lithocholic and chenodeoxycholic acids, recently discovered to be natural bile acids, is described. The principal reactions involved were (1) elimination of the 12α‐mesyloxy group of the methyl esters of 3α‐acetate‐12α‐mesylate and 3α,7α‐diacetate‐12α‐mesylate derivatives of deoxycholic acid and cholic acid with potassium acetate/hexamethylphosphoramide; (2) simultaneous reduction/hydrolysis of the resulting △¹¹‐3α‐acetoxy and △¹¹‐3α,7α‐diacetoxy methyl esters with lithium aluminum hydride; (3) stereoselective 11α‐hydroxylation of the △¹¹‐3α,24‐diol and △¹¹‐3α,7α,24‐triol intermediates with B₂H₆/tetrahydrofuran (THF); and (4) selective oxidation at C‐24 of the resulting 3α,11α,24‐triol and 3α,7α,11α,24‐tetrol to the corresponding C‐24 carboxylic acids with NaClO₂ catalyzed by 2,2,6,6‐tetramethylpiperidine 1‐oxyl free radical (TEMPO) and NaClO. In summary, 3α,11α‐dihydroxy‐5β‐cholan‐24‐oic acid and 3α,7α,11α‐trihydroxy‐5β‐cholan‐24‐oic acid have been synthesized and their nuclear magnetic resonance (NMR) spectra characterized. These compounds are now available as reference standards to be used in biliary bile acid analysis.     

The One‐Pot Wittig Reaction: A Facile Synthesis of α,β‐Unsaturated Esters and Nitriles by Using Nanocrystalline Magnesium Oxide

Nanocrystalline magnesium oxide was found to be an effective heterogeneous, solid base catalyst for the one‐pot Wittig reaction to afford α,β‐unsaturated esters and nitriles in excellent yields with high E‐stereoselectivity in the presence of triphenylphosphine under mild conditions.     

Synthesis of ω‐amino‐α‐phenylcarbonate alkanes and their polymerization to [n]‐polyurethanes

Aliphatic [n]‐polyurethanes have recently been synthesized from ω‐isocyanato‐α‐alkanols or, more traditionally, by cationic ring‐opening polymerization of cyclourethanes or by the Bu₂Sn(OMe)₂‐promoted polycondensation of ω‐hydroxy‐α‐O‐phenylurethane alkanes. For the latter procedures, the conditions employed do not seem to be suitable for highly functionalized monomers. In contrast, the polymerization of ω‐amino‐α‐phenylcarbonate alkanes is expected to occur under milder conditions. ω‐Amino‐α‐phenylcarbonate alkanes have been synthesized from 6‐aminohexanol (1) and 3‐aminopropanol (6). The procedure involves the N‐Boc protection of the amino group, followed by activation of the alcohol. Removal of the N‐Boc affords the corresponding ω‐amino‐1‐O‐phenyloxycarbonyloxyalkane hydrochlorides. Other oligomeric comonomers between 1 and 6 have been prepared. The polymerization of these precursors takes place in the absence of metal catalysts to afford the corresponding linear and regioregular [n]‐polyurethanes. The procedure described is useful for the preparation of stable ω‐amino‐α‐phenylcarbonate alkane derivatives, which possess varied chain lengths between the terminal functions. These monomers yield [n]‐polyurethanes having various structures starting from just two aminoalkanols. The polyurethanes were obtained in high yields, with reasonable molecular weight and polydispersity values, and they were characterized spectroscopically and thermally. These studies reveal constitutionally uniform structures that are free of carbonate or urea linkages. Copyright © 2010 Society of Chemical Industry     

Rhodium‐Catalyzed Asymmetric Hydroformylation of 1,1‐Disubstituted Allylphthalimides: A Catalytic Route to β3‐Amino Acids

The high enantioselective rhodium‐catalyzed hydroformylation of 1,1‐disubstituted allylphthalimides has been developed. By employing chiral ligand 1,2‐bis[(2S,5S)‐2,5‐diphenylphospholano]ethane [(S,S)‐Ph‐BPE], a series of β³‐aminoaldehydes can be prepared with up to 95% enantioselectivity. This asymmetric procedure provides an efficient alternative route to prepare chiral β³‐amino acids and alcohols.     

Cationic copolymers of α,β‐poly‐(N‐2‐hydroxyethyl)‐DL‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy): synthesis and characterization

In the present study the derivatization of two water‐soluble synthetic polymers, α,β‐poly(N‐2‐hydroxyethyl)‐DL ‐aspartamide (PHEA) and α,β‐polyasparthylhydrazide (PAHy), with glycidyltrimethylammonium chloride (GTA) is described. This reaction permits the introduction of positive charges in the macromolecular chains of PHEA and PAHy in order to make easier the electrostatic interaction with DNA. Different parameters affect the reaction of derivatization, such as GTA concentration and reaction time. PHEA reacts partially and slowly with GTA; on the contrary the reaction of PAHy with GTA is more rapid and extensive. The derivatization of PHEA and PAHy with GTA is a convenient method to introduce positive groups in their chains and it permits the preparation of interpolyelectrolyte complexes with DNA. © 2000 Society of Chemical Industry     

Titanium‐Mediated Direct Carbon‐Carbon Double Bond Formation to α‐Trifluoromethyl Acids: A New Contribution to the Knoevenagel Reaction and a High‐Yielding and Stereoselective Synthesis of α‐Trifluoromethylacrylic Acids

An efficient strategy for a high‐yielding and stereoselective synthesis of α‐trifluoromethyl unsaturated carboxylic acids directly from the reactions of 3,3,3‐trifluoropropanoic acid (CF₃CH₂COOH) with various aryl aldehydes in the presence of titanium tetrachloride (TiCl₄) is reported here for the first time, which is a valuable expansion for the classical Knoevenagel reaction. Because these compounds may have potential applications in organic electronics and can be easily converted to the corresponding fluorinated alcohols and amino acids with excellent bioactivity, this route should be a good choice for the preparation of α‐trifluoromethyl‐containing derivatives.     

Michael Reaction of Nitroalkanes with β‐Nitroacrylates under a Solid Promoter: Advanced Regio‐ and Diastereoselective Synthesis of Nitro‐Functionalized α,β‐Unsaturated Esters and 1,3‐Butadiene‐2‐carboxylates

A new class of nitro‐functionalized α,β‐unsaturated esters has been prepared by a regio‐ and diastereoselective Michael addition of nitroalkanes to β‐nitroacrylates, performed at room temperature, under carbonate on polymer as promoter, and in the presence of ethyl acetate as eco‐friendly solvent. Moreover, by the modular choice of the reaction conditions the method allows the synthesis of 1,3‐butadiene‐2‐carboxylates.     

Multiple anion···π interactions with a soft selenium atom: Accommodation of NCSe anions inside hydrophobic pockets of adamantane/1,2,4-triazole coordination framework

A new framework coordination polymer {[Cd₃(tr₂ad)₆](NCSe)₆·12H₂O}_n [tr₂ad-4,4′-(adamantane-1,3-diyl)bis(1,2,4-triazole)] exhibits 3D primitive cubic topology adopted by trinuclear [Cd₃(tr)₁₂] net nodes and tridentate tr₂ad links. The structure reveals unprecedented multiple anion ···π interactions employing the soft Se site of the ambifunctional NCSe^? anion and three triazole groups pre-arranged on a tricadmium matrix. The framework generates hydrophobic pockets serving for hosting the uncoordinated anions by a concerted action of Se···π and CH···Se interactions.     

Diastereoselective Synthesis of Six‐Membered Carbocyclic Spirooxindoles via 6π‐Electrocyclization of 3‐Dienylidene‐2‐ oxindoles

The Wittig reaction of isatin derivatives with Morita–Baylis–Hillman bromides of cinnamaldehydes afforded 3‐dienylidene‐2‐oxindoles. These trienes were converted into the corresponding spirooxindoles in a stereoselective manner in refluxing toluene in good yields. The diastereomeric spirooxindoles could be obtained stereoselectively by adding a catalytic amount of palladium(II) acetate via the palladium‐catalyzed isomerization of EEE‐trienes to ZEE‐trienes followed by a more facile 6π‐electrocyclization process. The obtained spirooxindoles could be further functionalized by palladium‐catalyzed oxidative arylation, thionation with Lawesson’s reagent, catalytic hydrogenation and Friedel–Crafts‐type reaction.

     

SO42−/ZrO2 supported on γ‐Al2O3 as a catalyst for CO2 desorption from CO2‐loaded monoethanolamine solutions

In this work, the composite catalysts, SO₄²/ZrO₂/γ‐Al₂O₃ (SZA), with different ZrO₂ and γ‐Al₂O₃ mass ratios were prepared and used for the first time for the carbon dioxide (CO₂)‐loaded monoethanolamine (MEA) solvent regeneration process to reduce the heat duty. The regeneration characteristics with five catalysts (three SZA catalysts and two parent catalysts) of a 5 M MEA solution with an initial CO₂ loading of 0.5 mol CO₂/mol amine at 98°C were investigated in terms of CO₂ desorption performance and compared with those of a blank test. All the catalysts were characterized using X‐ray diffraction, Fourier transform infrared spectroscopy, N₂ adsorption–desorption experiment, ammonia temperature programmed desorption, and pyridine‐adsorption infrared spectroscopy. The results indicate that the SZA catalysts exhibited superior catalytic activity to the parent catalysts. A possible catalytic mechanism for the CO₂ desorption process over SZA catalyst was proposed. The results reveal that SZA1/1, which possesses the highest joint value of Brφnsted acid sites (BASs) and mesopore surface area (MSA), presented the highest catalytic performance, decreasing the heat duty by 36.9% as compared to the catalyst‐free run. The SZA1/1 catalyst shows the best catalytic performance as compared with the reported catalyst for this purpose. Moreover, the SZA catalyst has advantages of low cost, good cyclic stability, easy regeneration and has no effect on the CO₂ absorption performance of MEA. © 2018 American Institute of Chemical Engineers AIChE J, 64: 3988–4001, 2018     

Highly Enantioselective Phase‐Transfer Catalytic α‐Alkylation of α‐tert‐Butoxycarbonyllactams: Construction of β‐Quaternary Chiral Pyrrolidine and Piperidine Systems

A new enantioselective α‐alkylation of α‐tert‐butoxycarbonyllactams for the construction of β‐quaternary chiral pyrrolidine and piperidine core systems is reported. α‐Alkylations of N‐methyl‐α‐tert‐butoxycarbonylbutyrolactam and N‐diphenylmethyl‐α‐tert‐butoxycarbonylvalerolactam under phase‐transfer catalytic conditions (solid potassium hydroxide, toluene, −40 °C) in the presence of (S,S)‐3,4,5‐trifluorophenyl‐3,3′,5,5′‐tetrahydro‐2,6‐bis(3,4,5‐trifluorophenyl)‐4,4′‐spirobi[4H‐dinaphth[2,1‐c:1′,2′‐e]azepinium] bromide [(S,S)‐NAS Br] (5 mol%) afforded the corresponding α‐alkyl‐α‐tert‐butoxycarbonyllactams in very high chemical (up to 99%) and optical yields (up to 98% ee). Our new catalytic systems provide attractive synthetic methods for pyrrolidine‐ and piperidine‐based alkaloids and chiral intermediates with β‐quaternary carbon centers.     

Practical Solvent‐Free Ruthenium Trichloride‐Mediated Benzannulation Approach to Fused Functionalized Arenes

The solvent‐ and ligand‐free [2+2+2] ruthenium‐promoted cycloaddition of α,ω‐diynes and alkynes provides a facile and efficient strategy for the synthesis of substituted benzene‐derived systems. The search for the optimal reaction conditions revealed the unprecedented catalytic activity of ruthenium trichloride for benzannulation reactions and this atom‐economical process allowed the synthesis of fused arenes including dihydrobenzofurans, isoindolines, indanes in good to high yields. This practical protocol also gave rise to the preparation of pentasubstituted aromatic derivatives and was applied to the one‐gram scale synthesis of a functionalized heterocycle.

     

Delocalized π‐electrons in 2‐oxazoline rings resulting in negatively charged nitrogen atoms: revealing the selectivity during the initiation of cationic ring‐opening polymerizations

The inventory of the single‐crystal X‐ray structures of aliphatic and aromatic 2‐oxazolines, namely 2‐nonyl‐2‐oxazoline, 2,2′‐tetramethylenebis(2‐oxazoline) and 2‐phenyl‐2‐oxazoline, reveals significant delocalization of π‐electrons along the N? C? O segment. The delocalization of π‐electrons is stabilized by inductive and resonance contributions of the side‐chains; in 2‐phenyl‐2‐oxazoline, also π‐arene interactions between the benzene ring and the C? N and the C? O bond stabilize the crystalline phase. This delocalization gives a partial negative charge to the nitrogen atom and a partial positive charge to the oxygen atom. The partial negative charge of the nitrogen atom makes this atom the exclusive reaction partner also for highly reactive non‐selective cations, which explains the regioselectivity of electrophilic attacks in cationic ring‐opening polymerizations. Copyright © 2011 Society of Chemical Industry     

Polyaniline doped with α, ω‐alkanedisulfonic acids: preparation and characterization

The use of α, ω‐alkanedisulfonic acid, HO₃S(CH₂)_nSO₃H (n = 1, 4, 6 and 12), as a dopant for polyaniline (PANi) was investigated. This series of disulfonic acids with varying chain lengths were synthesized and used in the doping of PANi. The doped polymers showed conductivity in the range 10^?2 to 10^?1 S cm^?1. Thermal studies showed that the doped polymers, depending on the chain length of α,ω‐alkanedisulfonic acid, were stable up to ca 300 °C and the thermal stability decreased with increasing dopant chain length. The thermal stability of α,ω‐alkanedisulfonic acid‐doped PANi was higher than that of alkanesulfonic acid‐doped PANi which typically degrades around 250 °C, suggesting a moderately broader processing window for α,ω‐alkanedisulfonic acid‐doped PANi for blending with other thermoplastics. Copyright © 2012 Society of Chemical Industry     

A facile and practical approach to randomly methylated β‐cyclodextrin

BACKGROUND: Because of its high demand for use in pharmaceutical products, cosmetics, soil remediation technologies, etc., randomly methylated β‐cyclodextrin (RM‐β‐CD) is one of the most important cyclodextrin (CD) derivatives. The aim of this present work is to use a green and commercially available approach to obtain RM‐β‐CD. Compared with other methylated CDs, RM‐β‐CD with an asymmetric molecular structure has higher water solubility. When the degree of substitution (DS) is about 1.8, the solubility tends to increase with increasing temperature and is suitable for pharmaceutical applications. RESULTS: RM‐β‐CD was synthesized using a green approach with ideal DS equal to 1.79. The one step process of β‐cyclodextrin methylation by CH₃Cl instead of (CH₃)₂SO₄ at mild temperature (80 °C) and pressure (1.60 MPa) with a good yield (78%), is convenient and environmentally friendly. The mixture of RM‐β‐CD obtained contained five compounds with various DS, from which the main compound with a DS equal to 1.8 was separated by column chromatography. The compounds were carefully characterized by infra‐red, NMR and mass spectrometry. CONCLUSIONS: The one‐step process to RM‐β‐CDs with CH₃Cl is more economical, more efficient and less noxious than the usual method using (CH₃)₂SO₄. Moreover, this approach avoids some poisonous residual materials and meets the demand for protecting the environment. Copyright © 2009 Society of Chemical Industry     

Cascade Reactions: Sequential Homobimetallic Catalysis Leading to Benzofurans and β,γ‐Unsaturated Esters

The concatenation between a Pd(0)‐promoted deallylation catalytic cycle and a Pd(II)‐promoted heterocyclization catalytic cycle (an example of what we have named “sequential homobimetallic catalysis”) has been shown to occur starting from 1‐(2‐allyloxyphenyl)‐2‐yn‐1‐ols 1 to afford 2‐benzofuran‐2‐ylacetic esters 2 and β,γ‐unsaturated esters in high yields under carbonylative conditions. In view of the conceptual as well as the synthetic importance of the process, the mechanistic aspects and the synthetic scope of the reaction have been investigated in detail. All the experimental evidence is in agreement with the sequential homobimetallic mechanism, and the reaction has proven to be of general synthetic applicability.     

Ruthenium‐Catalyzed Oxidation of the Porphyrin β,β′‐Pyrrolic Ring: A General and Efficient Approach to Porpholactones

We describe an efficient ruthenium‐catalyzed oxidation of the β,β′‐pyrrolic ring on the porphyrin periphery. Through the conversion of a β,β′‐double bond to a lactone moiety, the direct preparation of porpholactones from porphyrins is achieved, which previously suffered from needing toxic reagents, multiple synthetic steps and low yields. The generality of this method has been investigated with various porphyrins with different electronic and steric effects, even some metalloporphyrins, and so represents a general and efficient approach for the synthesis of the intriguing porpholactone derivatives.