Microfluidic immunoassay for bacterial toxins with supported phospholipid bilayer membranes on poly(dimethylsiloxane)

We report a heterogeneous immunoassay for cholera toxin (CT) using supported bilayer membranes (SBMs) in a poly(dimethylsiloxane) (PDMS) microfluidic device. Phosphatidylcholine membranes assembled on plasma-oxidized PDMS by vesicle fusion bring about favorable surface properties, such as improved wettability and protein resistance. Contact angle measurements show that the lipid membranes can preserve hydrophilic surfaces for hours, whereas untreated substrates rapidly undergo hydrophobic recovery. Fluorescence recovery after photobleaching performed in situ reveals that the membranes have relatively high lateral mobility. Experimental data-fitting to theoretical models yields diffusion coefficients of 1.8 +/- 0.7 microm(2)/s on PDMS and 3.4 +/- 0.8 microm(2)/s on glass. Fluorescence studies utilizing tagged proteins show that SBMs reduce nonspecific adsorption of avidin and BSA on PDMS by 2-3 orders of magnitude, as compared to that on plasma oxidized surfaces. SBMs and their protein-resistant properties are not significantly affected by long flow times, indicating good membrane stability. These studies increase our understanding of the relationship between molecular level interactions and membrane properties, allowing for development of a rapid heterogeneous immunoassay for CT in PDMS microchips with cell surface receptor molecules. Using optimized sample injection and buffer washing conditions, microfluidic immunoassay of CT is complete within 25 min, and a dynamic range over 3 orders of magnitude with a detection limit of 8 fmol of toxin is achieved.     

Hybridization behavior of mixed DNA/alkylthiol monolayers on gold: characterization by surface plasmon resonance and 32P radiometric assay

Nucleic acid assay from a complex biological milieu is attractive but currently difficult and far from routine. In this study, DNA hybridization from serum dilutions into mixed DNA/mercaptoundecanol (MCU) adlayers on gold was monitored by surface plasmon resonance (SPR). Immobilized DNA probe and hybridized target densities on these surfaces were quantified using 32P-radiometric assays as a function of MCU diluent exposure. SPR surface capture results correlated with radiometric analysis for hybridization performance, demonstrating a maximum DNA hybridization on DNA/MCU mixed adlayers. The maximum target surface capture produced by MCU addition to the DNA probe layer correlates with structural and conformational data on identical mixed DNA/MCU adlayers on gold derived from XPS, NEXAFS, and fluorescence intensity measurements reported in a related study (Lee, C.-Y.; Gong, P.; Harbers, G. M.; Grainger, D. W.; Castner, D. G.; Gamble, L. J. Anal. Chem. 2006, 78, 3316-3325.). MCU addition into the DNA adlayer on gold also improved surface resistance to both nonspecific DNA and serum protein adsorption. Target DNA hybridization from serum dilutions was monitored with SPR on the optimally mixed DNA/MCU adlayers. Both hybridization kinetics and efficiency were strongly affected by nonspecific protein adsorption from a complex milieu even at a minimal serum concentration (e.g., 1%). No target hybridization was detected in SPR assays from serum concentrations above 30%, indicating nonspecific protein adsorption interference of DNA capture and hybridization from complex milieu. Removal of nonsignal proteins from nucleic acid targets prior to assay represents a significant issue for direct sample-to-assay nucleic acid diagnostics from food, blood, tissue, PCR mixtures, and many other biologically complex sample formats.     

In situ FT-IR measurements of competitive vapor adsorption into porous thin films containing silica nanoparticles

Vapor adsorption into porous ultrathin films on a gold surface is investigated with in situ surface plasmon resonance (SPR) and polarization-modulation infrared reflection-absorption spectroscopy (PM-IRRAS). The thin films are prepared by the electrostatic self-assembly of oppositely charged poly(L-lysine) (PL) and silica nanoparticles on a chemically modified gold surface. Characterization with ex situ SPR and PM-IRRAS demonstrates the buildup of multiple PL/SiO2 bilayers as well as an excellent correlation between the quantitative results from these two techniques. In situ vapor adsorption experiments with these thin films show evidence of porosity, reproducibility, and rapid reversibility. Exposure to acetone vapor (P/P0 = 0.032) causes the film to adsorb 9% acetone by volume, which corresponds to coverage of approximately one-half of the silica nanoparticle surface area. In situ PM-IRRAS provides much information about the molecular interactions occurring in the film upon adsorption or desorption of vapors. Dosing with a mixture of vapors leads to a competition for adsorption into the film, and PM-IRRAS results show that acetone slightly outcompetes nitromethane. These experiments with nanoparticle thin films demonstrate the advantages of using in situ PM-IRRAS for studying reversible adsorption in the presence of vapor mixtures.     

Electrochemical thinning of thicker gold film with qualified thickness for surface plasmon resonance sensing

To meet the requirement of surface plasmon resonance (SPR) sensing, controlling the thickness of the gold film is very important. Here, we report an efficient and simple approach to prepare a SPR-active substrate when the thickness of the gold film is larger than the optimizing 50 nm and smaller than 100 nm. This method is based on anodic electrodissolution of gold in electrolyte containing chloride ions. Using this method, the thickness of gold films can be easily changed at a nanometer scale by controlling the number of potential scans and the concentrations of chloride ions in the electrolyte. At the same time, the influence of gold film thickness on the SPR signal is recorded by SPR in real time. To assess the change of the surface roughness and morphology of gold film through anodic electrodissolution, atomic force microscopy was used. The surface roughness of the same Au film before and after anodic electrodissolution is 1.179 and 2.767 nm, respectively. The change of the surface roughness of Au film brings out a slight angle shift of SPR. This indicates that surface electrodissolution of the gold does not affect the character of the original bulk film and this film can be used for SPR experiments. To confirm our expectation, a simple adsorption experiment of cytochrome c (Cyt c) on the gold film treated with anodic electrodissolution modified by 11-mercaptoundecanic acid was carried out. The angle shift of SPR confirmed the adsorption of Cyt c, and the cyclic voltammetry of Cyt c provided a complementary confirmation for the adsorption of Cyt c. These results show that this approach provides a good way to change the thicker gold film to an optimized thickness of SPR sensing. The great advantage brought by this approach is in that it can convert the waste gold films with greater thicknesses fabricated by the vacuum deposition method or other methods into useful materials as active SPR substrates.     

Fabrication of a surface plasmon resonance biosensor based on gold nanoparticles chemisorbed onto a 1,10-decanedithiol self-assembled monolayer

We have investigated the fabrication of surface plasmon resonance (SPR) biosensors using self-assembled monolayers (SAMs) and adsorbed gold nanoparticles. The SAM of 1,10-decanedithiol was first fabricated onto a gold substrate. Gold nanoparticles were then chemisorbed onto the SAM surface by bonding with the terminal thiol groups, forming a sensor that can be used to immobilize proteins. Bovine serum albumin (BSA) was used as a test protein in this study. Several spectroscopic and microscopic techniques were used to investigate both the SAM and the chemisorption of gold nanoparticles at the SAM surface. Our results confirm the covalent bonding of the gold nanoparticles onto the SAM. Surface plasmon resonance (SPR) was used to study both the adsorption of BSA to the SAM surface and to the gold nanoparticle-coated SAM. For SAM surfaces with adsorbed gold nanoparticles a larger SPR response to BSA than to the sensors with a bare SAM is observed.     

Total internal reflection ellipsometry: principles and applications

A concept for a measurement technique based on ellipsometry in conditions of total internal reflection is presented. When combined with surface plasmon resonance (SPR) effects, this technique becomes powerful for monitoring and analyzing adsorption and desorption on thin semitransparent metal films as well as for analyzing the semitransparent films themselves. We call this technique total internal reflection ellipsometry (TIRE). The theory of ellipsometry under total internal reflection combined with SPR is discussed for some simple cases. For more advanced cases and to prove the concept, simulations are performed with the Fresnel formalism. The use of TIRE is exemplified by applications in protein adsorption, corrosion monitoring, and adsorption from opaque liquids on metal surfaces. Simulations and experiments show greatly enhanced thin-film sensitivity compared with ordinary ellipsometry.     

Controlled nucleation and growth of surface-confined gold nanoparticles on a (3-aminopropyl)trimethoxysilane-modified glass slide: a strategy for SPR substrates

The thickness of the gold film and its morphology, including the surface roughness, are very important for getting a good, reproducible response in the SPR technique. Here, we report a novel alternative approach for preparing SPR-active substrates that is completely solution-based. Our strategy is based on self-assembly of the gold colloid monolayer on a (3-aminopropyl)trimethoxysilane-modified glass slide, followed by electroless gold plating. Using this method, the thickness of films can be easily controlled at the nanometer scale by setting the plating time in the same conditions. Surface roughness and morphology of gold films can be modified by both tuning the size of gold nanoparticles and agitation during the plating. Surface evolution of the Au film was followed in real time by UV-vis spectroscopy and in situ SPRS. To assess the surface roughness and electrochemical stability of the Au films, atomic force microscopy and cyclic voltammetry were used. In addition, the stability of the gold adhesion is demonstrated by three methods. The as-prepared Au films on substrates are reproducible and stable, which allows them to be used as electrodes for electrochemical experiments and as platforms for studying SAMs.     

Detection of phosphopeptides by localized surface plasma resonance of titania-coated gold nanoparticles immobilized on glass substrates

We herein demonstrate a new sensing method for phosphopeptides by localized surface plasmon resonance (LSPR) using titania-coated gold nanoparticles immobilized on the surface of a glass slide as the sensing substrate and using UV-visible spectrophotometry as the detection tool. Titania has been known to be an effective substrate for binding with phosphorylated species. The detection principle is the shift of wavelength of optical absorption due to SPR of the gold nanoparticles induced by binding of phosphorylated species with titania on the surface of the gold nanoparticles. The feasibility of the approach is demonstrated by detection of tryptic digest products of beta-casein and milk. Gold nanoparticles coated with thin films of titania, immobilized on a glass slide, can selectively bind traces of phosphopeptides from complex samples, resulting in a wavelength shift of the absorption band in the SPR spectrum with good reproducibility. The LSPR results are confirmed by matrix-assisted laser desorption/ionization mass spectrometry. The detection limit for the tryptic digest product of beta-casein is 50 nM.     

贵金属纳米颗粒的表面等离子共振研究

通过修正的Mie理论分别对单金属Ag、单金属Cu和Cu核Ag壳纳米颗粒/玻璃复合材料的吸收光谱进行了理论计算.计算结果表明,对单金属Ag纳米颗粒/玻璃复合材料,Ag的吸收峰位于425nm左右,不随颗粒尺寸变化而发生偏移;对单金属Cu纳米颗粒/玻璃复合材料,Cu的吸收峰也不随尺寸变化发生偏移但强度较弱;对Cu核Ag壳纳米...     

Direct immobilization of protein g variants with various numbers of cysteine residues on a gold surface

Protein G is an antibody binding protein, which specifically targets the Fc region of an antibody. It therefore has been widely used to immobilize different types of antibodies in numerous immunoassays. Here, we have engineered Streptococcus protein G to contain various numbers of cysteine residues at the N-terminus and therefore to form well-oriented protein G films on bare gold. SPR and SPR imaging analyses indicated that a gold surface treated with cysteine-tagged protein G possesses a superior antibody binding ability compared to one treated with tag-free protein G. AFM images indicated a higher surface coverage by antibody binding on the cysteine-tagged protein G surface than the intact protein G surface. The proper orientation of cysteine-tagged protein G on a gold surface also afforded better orientation of immobilized antibodies, resulting in enhanced antigen detection. Moreover, the protein G surfaces maintained their high antibody binding ability during multiple rounds of antibody interaction tests. The cysteine-tagged protein G constructed in this study can be a valuable link for oriented antibody immobilization in a variety of immunosensors.     

Surface Plasmon Resonance Imaging Measurements of Electrostatic Biopolymer Adsorption onto Chemically Modified Gold Surfaces

A combination of in situ and ex situ surface plasmon resonance (SPR) imaging experiments is used to characterize the differential electrostatic adsorption of proteins and synthetic polypeptides onto photopatterned monolayers at gold surfaces. The nonspecific electrostatic adsorption of proteins onto negatively charged self-assembled monolayers (SAMs) of 11-mercaptoundecanoic acid (MUA) is found to depend on the protein pI, solution ionic strength, and solution pH. The pH dependence of the electrostatic adsorption of the protein avidin onto a MUA SAM indicates that a full monolayer adsorbs at a solution pH greater than 5.0, and an "effective pK(a)" of 3.6 is determined for the avidin adsorption. This effective pK(a) is a combination of the pK(a) of the MUA monolayer and the ion pairing adsorption coefficient for the avidin. Additional SPR imaging experiments show that the electrostatic adsorption of the synthetic polypeptide poly-l-lysine (PL) onto a MUA SAM varies with molecular weight, forming a full PL monolayer for polypeptides with more than 67 lysine residues.     

Surface plasmon resonance imaging measurements of antibody arrays for the multiplexed detection of low molecular weight protein biomarkers

This paper describes a simple methodology for the creation of high-density multiplexed antibody arrays on gold surfaces that can be used to detect low molecular weight protein biomarkers with surface plasmon resonance imaging (SPRI). A one-step carbonyldiimidazole (CDI) surface reaction was utilized to attach antibodies onto alkanethiol-modified gold surfaces and characterized with polarization modulation FT-IR reflection absorption spectroscopy. The CDI chemistry was then employed to create an antibody microarray with array element sizes varying from 750 microm down to 200 microm. As a demonstration, a three-component antibody array was employed to detect two clinically important protein biomarkers, beta2-microglobulin (11.8 kDa) and cystatin C (13.4 kDa). SPRI measurements could simultaneously detect both of these small unlabeled proteins with no cross talk at solution concentrations from 300 nM down to 1 nM. In addition, the adsorption strengths of these biomarkers onto an antibody array were measured with SPRI and compared to those obtained from the kinetic analysis of single-channel angle shift SPR measurements.     

Fabrication of histidine-tagged fusion protein arrays for surface plasmon resonance imaging studies of protein-protein and protein-DNA interactions

The creation and characterization of histidine-tagged fusion protein arrays using nitrilotriacetic acid (NTA) capture probes on gold thin films for the study of protein-protein and protein-DNA interactions is described. Self-assembled monolayers of 11-mercaptoundecylamine were reacted with the heterobifunctional linker N-succinimidyl S-acetylthiopropionate (SATP) to create reactive sulfhydryl-terminated surfaces. NTA capture agents were immobilized by reacting maleimide-NTA molecules with the sulfhydryl surface. The SATP and NTA attachment chemistry was confirmed with Fourier transform infrared reflection absorption spectroscopy. Oriented protein arrays were fabricated using a two-step process: (i) patterned NTA monolayers were first formed through a single serpentine poly(dimethylsiloxane) microchannel; (ii) a second set of parallel microchannels was then used to immobilize multiple His-tagged proteins onto this pattern at discrete locations. SPR imaging measurements were employed to characterize the immobilization and specificity of His-tagged fusion proteins to the NTA surface. SPR imaging measurements were also used with the His-tagged fusion protein arrays to study multiple antibody-antigen binding interactions and to monitor the sequence-specific interaction of double-stranded DNA with TATA box-binding protein. In addition, His-tagged fusion protein arrays created on gold surfaces were also used to monitor antibody binding with fluorescence microscopy in a sandwich assay format.     

Surface plasmon resonance imaging measurements of DNA and RNA hybridization adsorption onto DNA microarrays

Surface plasmon resonance (SPR) imaging is a surface-sensitive spectroscopic technique for measuring interactions between unlabeled biological molecules with arrays of surface-bound species. In this paper, SPR imaging is used to quantitatively detect the hybridization adsorption of short (18-base) unlabeled DNA oligonucleotides at low concentration, as well as, for the first time, the hybridization adsorption of unlabeled RNA oligonucleotides and larger 16S ribosomal RNA (rRNA) isolated from the microbe Escherichia coli onto a DNA array. For the hybridization adsorption of both DNA and RNA oligonucleotides, a detection limit of 10 nM is reported; for large (1,500-base) 16S rRNA molecules, concentrations as low as 2 nM are detected. The covalent attachment of thiol-DNA probes to the gold surface leads to high surface probe density (10(12) molecules/cm2) and excellent probe stability that enables more than 25 cycles of hybridization and denaturing without loss in signal or specificity. Fresnel calculations are used to show that changes in percent reflectivity as measured by SPR imaging are linear with respect to surface coverage of adsorbed DNA oligonucleotides. Data from SPR imaging is used to construct a quantitative adsorption isotherm of the hybridization adsorption on a surface. DNA and RNA 18-mer oligonucleotide hybridization adsorption is found to follow a Langmuir isotherm with an adsorption coefficient of 1.8 x 10(7) M(-1).     

Synthesis and electrografting of dendron anchored OEGylated surfaces and their protein adsorption resistance

In this study, a series of electrochemically active oligo(ethylene glycol) (OEG) linear-dendrons have been synthesized and grafted onto electrode surfaces by cyclic voltammetry (CV) to improve protein resistance. Dendronized molecules with peripheral carbazole functionality and branching architecture enabled tethering of the poly(ethylene glycol) (PEG) or OEG group with a predictable number of electrochemical reactive groups affecting OEG distribution and orientation. It is possible that ample spacing between the OEG chains affects the intrinsic hydration of these layers and thus surface protein resistance. The films were characterized by CV, surface plasmon resonance (SPR), static contact angle measurements, and atomic force microscopy (AFM). This approach should enable improved nonbiofouling properties on biorelevant electrode surfaces (metal or metal oxides) by potentiostatic or potentiodynamic electrochemical methods, providing an alternative to the self-assembled monolayer (SAM) approach for anchoring PEG layers.     

Nanoparticle-enhanced surface plasmon resonance detection of proteins at attomolar concentrations: comparing different nanoparticle shapes and sizes

The application of biofunctionalized nanoparticles possessing various shapes and sizes for the enhanced surface plasmon resonance (SPR) detection of a protein biomarker at attomolar concentrations is described. Three different gold nanoparticle shapes (cubic cages, rods and quasi-spherical) with each possessing at least one dimension in the 40-50 nm range were systematically compared. Each nanoparticle (NP) was covalently functionalized with an antibody (anti-thrombin) and used as part of a sandwich assay in conjunction with a Au SPR chip modified with a DNA-aptamer probe specific to thrombin. The concentration of each NP-antibody conjugate solution was first optimized prior to establishing that the quasi-spherical nanoparticles resulted in the greatest enhancement in sensitivity with the detection of thrombin at concentrations as low as 1 aM. When nanorod and nanocage antibody conjugates were instead used, the minimum target concentrations detected were 10 aM (rods) and 1 fM (cages). This is a significant improvement (>10(3)) on previous NP-enhanced SPR studies utilizing smaller (~15 nm) gold NP conjugates and is attributed to the functionalization of both the NP and chip surfaces resulting in low nonspecific adsorption as well as a combination of density increases and plasmonic coupling inducing large shifts in the local refractive index at the chip surface upon nanoparticle adsorption.     

Combining surface plasmon resonance (SPR) spectroscopy with surface-enhanced Raman scattering (SERS)

The simultaneous measurement of surface plasmon resonance (SPR) spectroscopy and surface-enhanced Raman scattering (SERS) on flat metallic surfaces is demonstrated on a relatively simple experimental setup based on the Kretschmann configuration. This setup requires only minor modifications to standard Raman microscopes, and we show that it can be applied successfully to the most common conditions of SPR spectroscopy, i.e., water-based solutions on gold films. Our results emphasize the peculiar properties of the Kretschmann configuration for spectroscopy in general and SERS measurements in particular, especially in terms of the asymmetry between excitation and collection requirements. The combination of simultaneous SPR-SERS spectroscopy opens up interesting prospects in analytical science to study, for example, reaction kinetics at surfaces under conditions which are already available in commercial SPR instruments.     

复合纳米金膜的制备及其光学性质

本文利用化学还原法制备了不同尺寸的金纳米颗粒,并利用离子自组装多层技术在玻璃基底上沉积了基于金纳米颗粒的复合纳米金膜,研究了颗粒尺寸和成膜厚度对复合金膜光学性质的影响。不同比例的柠檬酸钠与氯金酸产生的金纳米颗粒溶液的紫外-可见光谱随着金颗粒直径增大而红移展宽。适量比例的柠檬酸钠与氯金酸能够产生平均直径为14±1.2nm且尺寸分布均匀的金纳米球;其溶液在518nm处有一特征吸收峰。不同大小的金纳米颗粒形成的薄膜的紫外-可见光谱形状不同,局域表面等离子体共振峰的位置随着颗粒直径的减小而向短波方向迁移。薄膜的沉积层数越多,薄膜表面的颗粒分布越均匀,局域表面等离子体峰的峰值变化也将减小。本工作证实了利用离子自组装多层技术能够快速、简易、低成本地在玻璃基底上沉积具有局域表面等离子体共振的复合纳米金膜。     

Characterization of silane-modified immobilized gold colloids as a substrate for surface-enhanced Raman spectroscopy

Immobilized gold colloid particles coated with a C-18 alkylsilane layer have been characterized as a substrate for surface-enhanced Raman scattering (SERS) studies of adsorption onto hydrophobic surfaces. Atomic force microscopy images, optical extinction spectra, and SERS measurements are reported as a function of accumulation of gold colloid on glass. As the metal particles become increasingly aggregated on the surface, the SERS enhancement increases until the plasmon resonance shifts to wavelengths longer than the excitation laser. The gold colloid substrates are stable and exhibit reproducible SERS enhancement. When octadecyltrimethoxysilane is self-assembled over the gold, the metal surface is protected from exposure to solution-phase species, as evidenced by the inhibition of chemisorption of a disulfide reagent to the overcoated gold surface. The results show that interactions with gold can be blocked by a silane layer so as not to significantly influence physisorption of molecules at the C-18/solution interface. The SERS enhancement from these C-18-overcoated gold substrates is reproducible for different films prepared from the same colloidal suspension; the substrates are also stable with time and upon exposure to laser irradiation.     

Multi-layered plasma-polymerized chips for SPR-based detection

The surface functionalization of a noble metal is crucial in a surface plasmon resonance-based biomolecular detection system because the interfacial coating must retain the activity of immobilized biomolecules while enhancing the optimal loading. We present here a one-step, room-temperature, high-speed, gas-phase plasma polymerization process for functionalizing gold substrates using siloxane as an adhesion layer and acrylic acid as a functional layer. Siloxane- and thiol-based coatings were compared for their performance as adhesion and the interfacial layer for subsequent functionalization. An in situ sequential deposition of siloxane and acrylic acid resulted in a 7-fold increase in carboxylic functionality surfacial content compared to films deposited with thiol-containing precursors. Grading of the layer composition achieved as a consequence of ion-induced mixing on the surface coating under the application of the plasma is confirmed through secondary ion mass spectroscopic studies. DNA hybridization assays were demonstrated on gold/glass substrates using surface plasmon enhanced ellipsometry and the applicability of this coating for protein immunoassays were demonstrated with plasma functionalized gold/plastic substrates in Biacore 3000 SPR instrument.