Vinyl polymerization by metal complexes, 26. Vinyl polymerization initiated by polyvinylamine-copper(II) chelate in dimethylsulfoxide solution

The polymerization of acrylonitrile and methyl methacrylate initiated by polyvinylamine-copper(II) chelate was studied in dimethylsulfoxide solution, in the presence and absence of carbon tetrachloride. For comparison, the dimeric chelate(1,3-diaminopropane-copper(II) chelate) was also chosen as an initiator. The initiation activity of the dimeric chelate was found to be higher than that of the polymeric chelate in dimethylsulfoxide solution, different from the cases in aqueous media. The dimeric chelate could initiate the polymerization of acrylonitrile effectively, even in the absence of carbon tetrachloride.     

Vinyl polymerization by metal complexes. XVIII. Kinetics of the polymerization of acrylonitrile initiated by imidazole-copper-(II) complexes

A study on the kinetics and mechanism of the polymerization of acrylonitrile initiated by imidazole and 2-substituted imidazole-copper-(II) complexes was made in dimethyl sulfoxide solution at 40–70°C. The rate of polymerization, Rp, could be expressed as follows: The overall activation energies of these polymerization processes are in a range from 14.2 to 69.1 KJ mole^-1. From the data of electronic spectra and electron paramagnetic resonance, it was confirmed that the polymerization in question could be initiated by free radicals which were formed by the reduction of copper-(II) complex to copper-(I) complex, and the latter formed a new complex with polyacrylonitrile resulted.     

New polymerization of dienes and related monomers catalyzed by late transition metal complexes

This article reviews recent studies on the polymerization of 1,6-heptadienes and 2-aryl- and 2-alkoxy-1-methylenecyclopropanes catalyzed by Co, Fe, and Pd complexes. Co and Fe complexes with bis(imino)pyridine ligands catalyze the cyclopolymerization of 1,6-heptadiene in the presence of MMAO to produce the polymer, which contains five-membered rings in the monomer units. The polymers with cis- or trans-five-membered rings are obtained selectively, depending on the complex used in the polymerization. The catalyst, prepared from the Co complex having a bis(imino)pyridine ligand and MMAO, promotes the polymerization of 2-aryl-1-methylenecyclopropanes without ring-opening. The reaction under ethylene atmosphere produces alternating copolymer of the two monomers to yield the polymers composed of the C4 repeating unit with a 1,1-cyclopropanediyl group. The alternating copolymer of ethylene and 7-methylenebicyclo[4.1.0]heptane undergoes thermal rearrangement to afford the polymer with CC double bond in main chain. A radical pathway is proposed. Dinuclear π-allylpalladium complexes with bridging Cl ligands initiate living polymerization of 2-alkoxy-1-methylenecyclopropanes, which accompanies ring-opening of the monomer, to afford the polymers composed of the C₃ repeating units having alkoxy and vinylidene groups. A cyclic dinuclear π-allylpalladium complex reacts with 2-alkoxy-1-methylenecyclopropane in the presence of pyridine to produce the living polymer with macrocyclic structures. Block copolymerization of the two monomers that contain OR or O(CH₂CH₂O)R as the substituents on the three-membered ring, results in the polymers with hydrophobic and hydrophilic segments.     

Anionic polymerization of fluorine-containing vinyl monomers

Summary The anionic polymerization of pentafluorophenylmethyl methacrylate (PFPMA) were examined with several anionic initiators. The initiators of relatively low activity such as t-C₄H₉OK, organozinc compounds and Al(C₂H₅)₃ produced poly(PFPMA) in fairly high yields though no polymer was obtained by the initiations of n-C₄H₉Li and C₂H₅MgBr within 7 days. The anionic polymerization reactivity of PFPMA was found to be strongly affected by the pentafluorophenyl group though the e-value of PFPMA is similar to those of methyl methacrylate and benzyl methacrylate.Part 7, Polym. J. 19, 958 (1987)     

Living cationic polymerization of vinyl monomers by organoaluminium halides

Summary Living cationic polymerization of isobutyl vinyl ether was achieved by EtAlCl₂ in the presence of ethyl acetate at rather high temperatures up to +25°C in toluene. In the absence of the ester additives, neither living nor long-lived propagating species were formed under these conditions. Similarly, living propagating species of vinyl ethers with an ester unit in the pendant (2-vinyloxyethyl benzoate and methacrylate) were obtained with EtAlCl₂ alone. The obtained polymers showed a very narrow molecular weight distribution (¯M_w/¯M_n<1.2) and the ¯M_n was directly proportional to the monomer conversion.     

Living cationic polymerization of vinyl monomers by organoaluminum halides

Summary Well-defined living polymers of isobutyl vinyl ether were obtained in the polymerization initiated with ethylaluminum dichloride (EtAlCl₂) in conjunction with a stoichiometric excess of dioxane (5–10 vol%) in n-hexane at 0°C. Under these conditions, the number-average molecular weight of the polymers increased in direct proportion to monomer conversion, while the molecular weight distribution stayed narrow (M_w/M_n = 1.1–1.25). In sharp contrast, the EtAlCl₂-initiated polymerization in the absence of dioxane led to non-living polymers with a broad molecular weight distribution. It was concluded that the propagating carbocation is stabilized not by the counteranion but by an externally added basic compound (dioxane) that strongly interacts with the active end.     

Vinyl polymerization by metal complexes. V. Effects of amines on the polymerization by copper(II) chelate and carbon tetrachloride initiating system

The polymerization of acrylonitrile was studied by the system of copper(II)-oligo(n)ethylene-(n+1)amine complex and carbon tetrachloride. Addition of amines to the initiating system accelerates the polymerization. The acceleration by these amines was found to be in the following order: prim.-amine<sec.-amine<tert.-amine<diamine<phenylenediamine. Effects of the sort of the ligands in the copper(II) chelates on the polymerization were also studied.     

Photoinitiated cationic polymerization of epoxide and vinyl monomers by p-trimethoxytrityl salts

Photoinitiated cationic polymerizations of cyclohexene oxide, tetrahydrofuran and N-vinylcarbazole were investigated in dichloromethane at 25°C, using stable, soluble and nonhygroscopic p-trimethoxytrityl salts having nonnucleophilic anions such as SbF₆ ⁻, AsF₆ ⁻, PF₆ ⁻, BF₄ ⁻, and SbCl₆ ⁻. The effects of anion, polymerization time, concentration of the salt and the intensity of light on the polymerization reaction are presented.     

Photopolymerization of vinyl monomers using benzophenone-tetrahydrofuran initiation system and aldehydes at low temperatures

The photopolymerizations of vinyl trifluoroacetate (VTFAc), vinyl acetate (VAc), and methyl methacrylate (MMA) using the initiation system benzophenone–tetrahydrofuran were studied at low temperatures. At ?78°C the rate of polymerization of VTFAc was higher than that of VAc, while MMA, which was solidified, did not polymerize. After melting the irradiated solid mixture the polymerization occurred at 4°C. The photoinduced polymerization of VTFAc occurred in the presence of butylaldehyde or isobutylaldehyde at ?70°C. The degrees of polymerization and syndiotacticities of the polymers prepared were investigated.     

Photoinitiated cationic polymerization of urethane vinyl ether crystalline monomers

Photoinitiated cationic polymerization of crystalline monomers based on urethane vinyl ether has been investigated by means of differential photocalorimetry (DPC). The crystalline monomers in the melt state polymerized rapidly by exposure to UV light in the presence of a cationic photoinitiator such as an iodonium salt, sulfonium salt or iron arene salt. The kinetics of the cationic photopolymerization process were studied by following k_p[M⁺] as a function of conversion. High conversions, of around 90 %, were obtained for most of the systems investigated. The efficiency of the cationic photoinitiators in initiating the polymerization of the vinyl ether monomers was in the order: iodonium salt > iron arene salt > sulfonium salt. Monomers modified with different saturated alcohols had different activities in photopolymerization, although they all carry the same functional group, i.e. vinyl ether. Copyright © 2005 Society of Chemical Industry     

Metal-complex compounds as components of initiating systems for the controlled radical polymerization of vinyl monomers

The effect of initiating systems based on substituted and unsubstituted metallocenes; polynuclear macrocyclic semi- and clathrochelates of Fe(II); and metal complexes of Ti(IV), Zr(IV), Fe(III), and Co(III) porphyrins on the free-radical polymerization of MMA and styrene is analyzed. Experimental data are systematized, general relationships are ascertained, and specific features of the process related to the structure of metal-complex compounds and the nature of initiators and monomers are revealed.     

Graft polymerization of some vinyl monomers onto alkali-treated cellulose

Treatment of cellulose by different concentrations of alkali, namely, 5–30% NaOH, changed its fine structure and transferred cellulose I into cellulose II. The decreased crystallinity due to alkali treatment and the transformation of cellulose I into cellulose II lowered the reactivity of cellulose toward the grafting polymerization reactions. Compactness of the structure as a result of the treatment of cellulose with 5% sodium hydroxide concentration decreased the rate of the grafting reaction and the grafting yield. On the other hand, such treatment of cellulose with different concentrations of alkali increased the rate of ceric consumption, i.e., increased the rate of oxidation of cellulose. Thus, the termination reaction of the grafting polymerization process may occur as a result of such oxidation and because of the increase of the active sites onto cellulose, leading to a decrease of the grafting yields and rate of grafting polymerization reaction by using the free-radical grafting process. The use of the ionic-xanthate method of grafting polyvinyl- and polyallyl-on alkali-treated cellulose shows an increase of grafting efficiency and grafting yields. Maximum grafting efficiency and yields were achieved when cellulose was treated with sodium hydroxide concentration below 15%, and maximum crystallinity indices were obtained. Using 15–25% sodium hydroxide lowered the indices of crystallinity, and lower grafting yields and grafting efficiency were achieved. Thus, transformation of cellulose I into cellulose II decreased the reactivity of these treated celluloses toward graft polymerization reactions by the use of the ionic-xanthate method. In our opinion, termination reactions may also occur and affect the results.     

Controlled release of biofunctional substances by radiation-induced polymerization: 1. Release of potassium chloride by polymerization of various vinyl monomers

The release behaviour of a drug from flat circular capsules obtained by radiation-induced polymerization at low temperatures and with different hydrophilic properties has been studied. The effect of various factors on release property was investigated. The release process could be divided into three parts, an initial quick release stage, stationary state release stage and a retarded release stage. Release behaviour in the stationary state was examined using Noyes-Whitney and Higuchi equations. It was shown that the hydrophilic property of polymer matrix expressed by water content was the most important effect on diffusion and release rate. Rigidity of the polymer may also affect diffusivity. The first quick release step could be attributed to rapid dissolution of drug in the matrix surface due to polymer swelling.     

茂金属化合物催化极性烯类单体活性聚合的研究进展

综述了CGC催化剂、单茂催化剂、多核茂金属催化剂、桥联茂金属催化剂,非茂金属催化剂催化极性烯类单体均聚合及极性烯类单体与非极性烯类单体共聚合的研究.茂金属催化剂催化极性烯类单体聚合的机理包括配位聚合机理与活性自由基聚合机理.采用茂金属催化体系可以制备极性烯类单体的均聚物及极性烯类单体与非极性烯类单体的共聚物.不仅拓宽了茂金属催化剂的应用范围,而且可开发出具有新性能的极性聚烯烃树脂.     

The plasma polymerization of vinyl monomers. II. A detailed study of the plasma polymerization of styrene

A study has been made on the plasma polymerization of styrene monomer in a cold, low-power, inductively coupled RF plasma. Styrene monomer yielded an insoluble, crosslinked film which was slightly colored. A kinetic study is reported for styrene. The effects of power level, bleed rate of monomer, pressure, and reactor geometry on the rate of polymer formation are reported. A mechanism is postulated for plasma polymerization. It was found that the initiation step was the rate controlling step and that the reaction followed a cationic polymerization scheme. Both crosslinking and discoloration of the polymers occur at the time of polymerization and are not a result of exposure of the reacted polymer to the plasma. The polymerization was shown to take place in the bulk phase as well as on the reaction wall surfaces.     

Peculiarities of establishment of steady-state frontal polymerization of vinyl monomers

Frontal radical polymerization of vinyl monomers in non-stationary mode is investigated theoretically. It is shown that the formation and the time of establishment of steady-state polymerization heat autowaves considerably depend on the initial temperature, T_i. When T_i is less than the adiabatic heating temperature (T_a), the excess heat and relatively high conversion foster front formation before the non-stationary one. Whereas, for T_i > T_a, steady-state frontal polymerization regime is established, when the heat flow from the outer source is considerably less than the heat evolving due to the chemical reaction.     

The in situ polymerization of vinyl monomers in polyester yarns

The effects of a pretreatment of polyester (PET) yarns with a strongly interacting solvent such as dimethylformamide (DMF) on vinyl monomer incorporation were investigated. When the DMF pretreatment is carried out at high temperatures (above 120°C), the swollen PET structure is stabilized by solvent-induced secondary crystallization. This substrate is highly suitable for the incorporation of vinyl monomers. In situ polymerization of vinyl monomers in DMF-treated PET was investigated using chemical and γ-irradiation polymerization techniques, both in the presence and in the absence of excess monomer outside the PET fibers. When polymerization was carried out in a system in which a constant supply of free radicals was available from the outside of the PET fibers, lower initiator concentrations and smaller γ-irradiation doses were necessary. These results are attributed to a low efficiency of the initiator inside the PET fiber due to mobility restrictions. Water uptake and moisture regain of PET yarns containing poly(hydroxyethyl methacrylate) and poly(acrylic acid) were also investigated. When most of the vinyl polymer was inside the PET fiber, water absorption was limited. The changes in mechanical properties of the PET yarns resulting from the DMF pretreatment were partially reversed by in situ polymerization of vinyl monomers.     

Graft copolymerization of vinyl monomers on modified cottons. VI. Vinyl graft copolymerization initiated by manganese (IV)

The ability of potassium permanganate in the presence of different acids to induce grafting of methyl methacrylate and acrylonitrile onto sodium hydroxide-treated cotton, partially carboxymethylated cotton, partially cyanoethylated cotton, and partially acetylated cotton was investigated. The copolymerization reaction was carried out under a variety of conditions. The graft yields are greatly enhanced by increasing concentration of monomer, reaction time, and temperature. The opposite holds true for initiator at higher concentrations. The effectiveness of the acids was: nitric acid > sulfuric acid > perchloric acid > hydrochloric acid. The change in the physical and/or chemical structure of cellulose by its modification via etherification reaction or esterification reaction had a significant effect on the susceptibility of cellulose toward grafting. While partial carboxymethylation or partial cyanoethylation of cellulose prior to grafting increased the graft yield, partial acetylation caused a decrease.     

Grafting onto wool. XVI. Graft copolymerization of vinyl monomers by use of TBHP–FAS as redox initiator

Methyl acrylate (MA), methyl methacrylate (MMA), and n-butyl vinyl ether (n-BVE) have been graft-copolymerized onto Himachali wool in an aqueous medium by using tertiary butyl hydroperoxide ferrous ammonium sulfate (TBHP-FAS) redox system at 40°C, 50°C, 60°C, and 70°C for various reaction periods. Percentage of grafting and percent efficiency have been determined as functions of concentration of monomers, molar ratios of [TBHP]/[FAS], time and temperture. Molar ratios of [TBHP]/[FAS] were found to influence grafting of different monomers studied. Chemical evidence indicates that a covalent bond formation occurs between grafted polymeric chain and backbone polymer. The rate of grafting (R_p) and induction period (I_p) of different monomers towards graft copolymerization were determined as function of total initial monomer concentrations. R_p and I_p of n-BVE are independent of total initial monomer concentrations while R_p and I_p of both MA and MMA were found to depend on the total initial monomer concentrations. MA, MMA, and n-BVE were found to differ in reactivity towards grafting onto wool in the presence of (TBHP-FAS) redox system; the following reactivity order was observed: MMA > MA > n-BVE.     

Some aspects of graft polymerization of vinyl monomers onto cellulose by use of tetravalent cerium. VI

The state of cellulose as defined by its crystallinity, grinding, and average degree of polymerization (D.P.) highly influences the grafting yield. Grinding of cellulose with a Wiley mill results in decreased grafting, while grinding with a ball mill or treatment with ethylenediamine, both of which lead to decrystallization of cellulose, nearly inhibits the grafting reaction from taking place. On the other hand, decreased D.P. leads to increased grafting yield. The governing factor being attributed to the specific surface of the cellulose. Increased specific surface, as decreased D.P., brings about an increase in the active sites formed on the cellulose and hence an increase in the grafting yield. However, this occurs up to a limit beyond which further increase in the specific surface, respectively, the formed active sites, as grinding with a Wiley mill and decrystallization, brings about termination reactions through disproportionation and coupling of the exceedingly increased free radicals, and hence grafting is decreased or nearly inhibited. Drying of cellulose at 105°C resulted in decreased grafting yield. This was attributed to condensation of the cellulose structure. It has been also found that the grafting yield is influenced by the type and origin of cellulose whose reactivities differ for different monomers.