Modeling turbine wakes and power losses within a wind farm using LES: An application to the Horns Rev offshore wind farm

A modeling framework is proposed and validated to simulate turbine wakes and associated power losses in wind farms. It combines the large-eddy simulation (LES) technique with blade element theory and a turbine-model-specific relationship between shaft torque and rotational speed. In the LES, the turbulent subgrid-scale stresses are parameterized with a tuning-free Lagrangian scale-dependent dynamic model. The turbine-induced forces and turbine-generated power are modeled using a recently developed actuator-disk model with rotation (ADM-R), which adopts blade element theory to calculate the lift and drag forces (that produce thrust, rotor shaft torque and power) based on the local simulated flow and the blade characteristics. In order to predict simultaneously the turbine angular velocity and the turbine-induced forces (and thus the power output), a new iterative dynamic procedure is developed to couple the ADM-R turbine model with a relationship between shaft torque and rotational speed. This relationship, which is unique for a given turbine model and independent of the inflow condition, is derived from simulations of a stand-alone wind turbine in conditions for which the thrust coefficient can be validated. Comparison with observed power data from the Horns Rev wind farm shows that better power predictions are obtained with the dynamic ADM-R than with the standard ADM, which assumes a uniform thrust distribution and ignores the torque effect on the turbine wakes and rotor power. The results are also compared with the power predictions obtained using two commercial wind-farm design tools (WindSim and WAsP). These models are found to underestimate the power output compared with the results from the proposed LES framework.     

Mesoscale modeling of offshore wind turbine wakes at the wind farm resolving scale: a composite‐based analysis with the Weather Research and Forecasting model over Horns Rev

The use of mesoscale modeling to reproduce the power deficits associated with wind turbine wakes in an offshore environment is analyzed. The study is based on multiyear (3 years) observational and modeling results at the Horns Rev wind farm. The simulations are performed with the Weather Research and Forecasting mesoscale model configured at a high horizontal resolution of 333 m over Horns Rev. The wind turbines are represented as an elevated momentum sink and a source of turbulent kinetic energy. Composites with different atmospheric conditions are extracted from both the observed and simulated datasets in order to inspect the ability of the model to reproduce the power deficit in a wide range of atmospheric conditions. Results indicate that mesoscale models such as Weather Research and Forecasting are able to qualitatively reproduce the power deficit at the wind farm scale. Some specific differences are identified. Mesoscale modeling is therefore a suitable framework to analyze potential downstream effects associated with offshore wind farms. Copyright © 2014 John Wiley & Sons, Ltd.     

Offshore wind farm wake recovery: Airborne measurements and its representation in engineering models

We present an analysis of wind measurements from a series of airborne campaigns conducted to sample the wakes from two North Sea wind farm clusters, with the aim of determining the dependence of the downstream wind speed recovery on the atmospheric stability. The consequences of the stability dependence of wake length on the expected annual energy yield of wind farms in the North Sea are assessed by an engineering model. Wakes are found to extend for significantly longer downstream distances (>50 km) in stable conditions than in neutral and unstable conditions (  15 km). The parameters of one common engineering model are modified to reproduce the observed wake decay at downstream distances  30 km. More significant effects on the energy yield are expected for wind farms separated by distances  30 km, which is generally the case in the North Sea, but additional data would be required to validate the suggested parameter modifications within the engineering model. A case study is accordingly performed to show reductions in the farm efficiency downstream of a wind farm. These results emphasize not only the importance of understanding the impact of atmospheric stability on offshore wind farms but also the need to update the representation of wakes in current industry models to properly include wake‐induced energy losses, especially in large offshore clusters.     

Contributions to wind farm power estimation considering wind direction‐dependent wake effects

This paper presents a contribution to wind farm ouput power estimation. The calculation for a single wind turbine involves the use of the power coefficient or, more directly, the power curve data sheet. Thus, if the wind speed value is given, a simple calculation or search in the data sheet will provide the generated power as a result. However, a wind farm generally comprises more than one wind turbine, which means the estimation of power generated by the wind farm as a function of the wind speed is a more complex process that depends on several factors, including the important issue of wind direction. While the concept of a wind turbine power curve for a single wind turbine is clear, it is more subject to discussion when applied to a whole wind farm. This paper provides a simplified method for the estimation of wind farm power, based on the use of an equivalent wake effect coefficient. Copyright © 2016 John Wiley & Sons, Ltd.     

Modelling and measurements of power losses and turbulence intensity in wind turbine wakes at Middelgrunden offshore wind farm

Understanding of power losses and turbulence increase due to wind turbine wake interactions in large offshore wind farms is crucial to optimizing wind farm design. Power losses and turbulence increase due to wakes are quantified based on observations from Middelgrunden and state‐of‐the‐art models. Observed power losses due solely to wakes are approximately 10% on average. These are relatively high for a single line of wind turbines due in part to the close spacing of the wind farm. The wind farm model Wind Analysis and Application Program (WAsP) is shown to capture wake losses despite operating beyond its specifications for turbine spacing. The paper describes two methods of estimating turbulence intensity: one based on the mean and standard deviation (SD) of wind speed from the nacelle anemometer, the other from mean power output and its SD. Observations from the nacelle anemometer indicate turbulence intensity which is around 9% higher in absolute terms than those derived from the power measurements. For comparison, turbulence intensity is also derived from wind speed and SD from a meteorological mast at the same site prior to wind farm construction. Despite differences in the measurement height and period, overall agreement is better between the turbulence intensity derived from power measurements and the meteorological mast than with those derived from data from the nacelle anemometers. The turbulence in wind farm model indicates turbulence increase of the order 20% in absolute terms for flow directly along the row which is in good agreement with the observations. Copyright © 2007 John Wiley & Sons, Ltd.     

Optimal selection of time windows for preventive maintenance of offshore wind farms subject to wake losses

The maintenance of wind farms is one of the major factors affecting their profitability. During preventive maintenance, the shutdown of wind turbines causes downtime energy losses. The selection of when and which turbines to maintain can significantly impact the overall downtime energy loss. This paper leverages a wind farm power generation model to calculate downtime energy losses during preventive maintenance for an offshore wind farm. Wake effects are considered to accurately evaluate power output under specific wind conditions. In addition to wind speed and direction, the influence of wake effects is an important factor in selecting time windows for maintenance. To minimize the overall downtime energy loss of an offshore wind farm caused by preventive maintenance, a mixed-integer nonlinear optimization problem is formulated and solved by the genetic algorithm, which can select the optimal maintenance time windows of each turbine. Weather conditions are imposed as constraints to ensure the safety of maintenance personnel and transportation. Using the climatic data of Cape Cod, Massachusetts, the schedule of preventive maintenance is optimized for a simulated utility-scale offshore wind farm. The optimized schedule not only reduces the annual downtime energy loss by selecting the maintenance dates when wind speed is low but also decreases the overall influence of wake effects within the farm. The portion of downtime energy loss reduced due to consideration of wake effects each year is up to approximately 0.2% of the annual wind farm energy generation across the case studies—with other stated opportunities for further profitability improvements.     

Experimental verification of computational predictions in power generation variation with layout of offshore wind farms

The optimization of wind farms with respect to spatial layout is addressed experimentally. Wake effects within wind turbine farms are well known to be deleterious in terms of power generation and structural loading, which is corroborated in this study. Computational models are the predominant tools in the prediction of turbine‐induced flow fields. However, for wind farms comprising hundreds of turbines, reliability of the obtained numerical data becomes a growing concern with potentially costly consequences. This study pursues a systematic complementary theoretical, experimental and numerical study of variations in generated power with turbine layout of an 80 turbine large wind farm. Wake effects within offshore wind turbine arrays are emulated using porous discs mounted on a flat plate in a wind tunnel. The adopted approach to reproduce experimentally individual turbine wake characteristics is presented, and drag measurements are argued to correctly capture the variation in power generation with turbine layout. Experimental data are juxtaposed with power predictions using ANSYS WindModeller simulation suite. Although comparison with available wind farm power output data has been limited, it is demonstrated nonetheless that this approach has potential for the validation of numerical models of power loss due to wake effects or even to make a direct physical prediction. The approach has even indicated useful data for the improvement of the physics within numerical models. Copyright © 2014 John Wiley & Sons, Ltd.     

A pragmatic approach to wind farm simulations using the dynamic wake meandering model

This paper presents a computationally efficient method for using the dynamic wake meandering model to conduct simulations of wind farm power production. The method is based on creating a database, which contains the time and rotor‐averaged wake effect at any point downstream of a wake‐emitting turbine operating in arbitrary ambient conditions and at an arbitrary degree of wake influence. This database is later used as a look‐up table at runtime to estimate the operating conditions at all turbines in the wind farm, thus eliminating the need to run the dynamic wake meandering model at runtime. By using the proposed method, the time required to conduct wind farm simulations is reduced by three orders of magnitude compared with running the standalone dynamic wake meandering model at runtime. As a result, the wind farm production dynamics for a farm of 100 turbines at 10,000 different sets of ambient conditions run on a normal laptop in 1 h. The method is validated against full scale measurements from the Smøla and OWEZ wind farms, and fair agreement is achieved. Copyright © 2014 John Wiley & Sons, Ltd.     

大连近海风电场风机机组的选型与布置初探

风机的选型与布置是风电场建设可行性研究的重要内容,对风电场的建设造价和投产后的发电效益有重要的影响。文章在大连近海风资源评估的基础上,综合考虑国内外风力发电机组的制造水平、技术成熟程度,选择4种机型,布置在两个参考场址,预测其理论发电量,通过技术经济比较,选出最佳机型。一号场址的水文地质条件比较利于风机布置,可安装34台单机容量为3 MW的风力发电机组,布置方式为2排17列,年上网发电量约为26 262万kWh。     

新型海上风力发电及其关键技术研究

回顾国外海上风力发电场的发展,针对随着海水深度增加导致海上风力机成本急剧上升的矛盾,引入海上漂浮式风力机概念,并详细介绍其结构和特点,通过系统介绍海上漂浮式风力机组成部分和设计制造中的关键技术,最后得出海上漂浮式风机是一种潜力巨大的新型风力发电技术,值得进一步深入研究。同时,针对我国陆、海资源的具体情况,较为系统地提出了海上漂浮式风力机研究的需要关注的关键问题,指出了该研究所具有的巨大社会经济价值。     

An evaluation of the predictive accuracy of wake effects models for offshore wind farms

Wake losses are perceived as one of the largest uncertainties in energy production estimates (EPEs) for new offshore wind projects. In recent years, significant effort has been invested to improve the accuracy of wake models. However, it is still common for a standard wake loss uncertainty of 50% to be assumed in EPEs for new offshore wind farms. This paper presents a body of evidence to support reducing that assumed uncertainty. It benchmarks the performance of four commonly used wake models against production data from five offshore wind farms. Three levels of evidence are presented to substantiate the performance of the models:

• Case studies, i.e. efficiencies of specific turbines under specific wind conditions;
• Array efficiencies for the wind farm as a whole for relatively large bins of wind speed and direction; and
• Validation wake loss, which corresponds to the overall wake loss within the proportion of the annual energy production where validation is possible.

The most important result for predicting annual energy production is the validation wake loss. The other levels of evidence demonstrate that this result is not unduly reliant on cancellation of errors between wind speed and/or wind direction bins. All of the root‐mean‐squared errors in validation wake loss are substantially lower than the 50% uncertainty commonly assumed in EPEs; indeed, even the maximum errors are below 25%. It is therefore concluded that there is a good body of evidence to support reducing this assumed uncertainty substantially, to a proposed level of 25%. Copyright © 2015 John Wiley & Sons, Ltd.     

海上风力发电机组基础的选择

介绍了海上风力发电的发展现状,结合海上采油平台形式,对海上风电机组采用的基础定义、基础类型及其选择进行了介绍。     

考虑疲劳均衡的海上风电场主动尾流控制研究

海上风电场运行维护成本高,而其尾流效应影响更加突出,不但会影响风电场的发电效率,还会增大风电场内机组的疲劳载荷,增加运维成本。文章针对基于疲劳均匀的海上风电场主动尾流控制展开研究,通过GH-Bladed软件计算建立了风电机组在典型控制工况下关键零部件的疲劳损伤量数据库。其中的工况包括最大功率追踪、桨距角控制和偏航控制3种,并引用了量子粒子群算法,通过变桨和偏航两种方法进行优化控制,以实现海上风电场发电量提升和风电机组疲劳均匀的多目标主动尾流优化控制策略,降低海上风电场运维成本。仿真结果表明了所提出控制方法的可行性。     

基于CFO的海上风电场微观选址优化算法研究

海上风电场用海面积有限,尾流影响比陆上大,微观选址是其规划设计的关键技术。传统优化算法大多采用离散化变量,使得潜在解空间减少到有限个,难以达到最优化的效果。为了提高海上风电场微观选址优化效率,文章提出了一种基于中心引力优化(CFO)算法的海上风电场微观选址方法。该算法使用实数编码,通过将微观选址优化的变量假设为天体,各个天体之间相互作用,达到平衡的原理,具有可能得到全局最优解和效率高的优点。使用该算法对海上风电场微观选址优化进行仿真,并与现有方法比较。结果表明,所提出的算法得到的排布方式发电量最高,并具有优化精度高、速度快和优化排布较为均匀的特点。该研究结果可以为实际工程应用提供参考。     

Evaluation of wind farm efficiency and wind turbine wakes at the Nysted offshore wind farm

Here, we quantify relationships between wind farm efficiency and wind speed, direction, turbulence and atmospheric stability using power output from the large offshore wind farm at Nysted in Denmark. Wake losses are, as expected, most strongly related to wind speed variations through the turbine thrust coefficient; with direction, atmospheric stability and turbulence as important second order effects. While the wind farm efficiency is highly dependent on the distribution of wind speeds and wind direction, it is shown that the impact of turbine spacing on wake losses and turbine efficiency can be quantified, albeit with relatively large uncertainty due to stochastic effects in the data. There is evidence of the ‘deep array effect’ in that wake losses in the centre of the wind farm are under‐estimated by the wind farm model WAsP, although overall efficiency of the wind farm is well predicted due to compensating edge effects. Copyright © 2010 John Wiley & Sons, Ltd.     

An experimental investigation on the effect of individual turbine control on wind farm dynamics

Individual wind turbines in a wind farm typically operate to maximize their performance with no consideration of the impact of wake effects on downstream turbines. There is potential to increase power and reduce structural loads within a wind farm by properly coordinating the turbines. To effectively design and analyze coordinated wind turbine controllers requires control‐oriented turbine wake models of sufficient accuracy. This paper focuses on constructing such a model from experiments. The experiments were conducted to better understand the wake interaction and impact on voltage production in a three‐turbine array. The upstream turbine operating condition was modulated in time, and the dynamic impact on the downstream turbine was recorded through the voltage output time signal. The flow dynamics observed in the experiments were used to improve a static wake model often used in the literature for wind farm control. These experiments were performed in the atmospheric boundary layer wind tunnel at the Saint Anthony Falls Laboratory at the University of Minnesota using particle image velocimetry for flow field analysis and turbine voltage modulation to capture the physical evolution in addition to the dynamics of turbine wake interactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Detection of nacelle anemometer faults in a wind farm minimizing the uncertainty

The performance assessment of wind farms requires the acquisition of accurate power and wind speed data of each turbine. Nowadays, the nacelle anemometry is widely studied as an option for power performance verification. Therefore, systems to detect the nacelle anemometer faults in a wind farm in operation are necessary for maintenance purposes. In this paper, we propose a method to detect wind speed deviations of the nacelle anemometers by comparing them with the nearby anemometers. This comparison is made through an approach to estimate the wind speed in each nacelle. The approach is based on the discretization of wind speed data using the bin method. The key issue of this proposal is the estimation of the anemometer deviations considering the range of data with lower uncertainty. To this end, an average uncertainty model per bin and direction sector has been integrated into the method. The tests show that using wind speeds higher than 4.5 m s ^{? 1} gives the lowest uncertainty. Data from two wind farms have been used to test this method, and the obtained results have allowed the detection of problematic anemometers. Copyright © 2012 John Wiley & Sons, Ltd.     

Validation of the dynamic wake meander model for loads and power production in the Egmond aan Zee wind farm

This paper investigates wake effects on load and power production by using the dynamic wake meander (DWM) model implemented in the aeroelastic code HAWC2. The instationary wind farm flow characteristics are modeled by treating the wind turbine wakes as passive tracers transported downstream using a meandering process driven by the low frequent cross‐wind turbulence components. The model complex is validated by comparing simulated and measured loads for the Dutch Egmond aan Zee wind farm consisting of 36 Vestas V90 turbine located outside the coast of the Netherlands. Loads and production are compared for two distinct wind directions—a free wind situation from the dominating southwest and a full wake situation from northwest, where the observed turbine is operating in wake from five turbines in a row with 7D spacing. The measurements have a very high quality, allowing for detailed comparison of both fatigue and min–mean–max loads for blade root flap, tower yaw and tower bottom bending moments, respectively. Since the observed turbine is located deep inside a row of turbines, a new method on how to handle multiple wakes interaction is proposed. The agreement between measurements and simulations is excellent regarding power production in both free and wake sector, and a very good agreement is seen for the load comparisons too. This enables the conclusion that wake meandering, caused by large scale ambient turbulence, is indeed an important contribution to wake loading in wind farms. Copyright © 2012 John Wiley & Sons, Ltd.     

Integrated offshore wind farm design: Optimizing micro‐siting and cable layout simultaneously

Electrical layout and turbine placement are key design decisions in offshore wind farm projects. Increased turbine spacing minimizes the energy losses caused by wake interactions between turbines but requires costlier cables with higher rates of failure. Simultaneous micro‐siting and electrical layout optimization are required to realize all possible savings. The problem is complex, because electrical layout optimization is a combinatorial problem and the computational fluid‐dynamics calculations to approximate wake effects are impossible to integrate into classical optimization. This means that state‐of‐the‐art methods do not generally consider simultaneous optimization and resort to approximations instead. We extend an existing model that successfully optimizes cable design to simultaneously consider micro‐siting. We use Jensen's equations to approximate the wake effect in an efficient manner, calibrating it with years of mast data. The wake effects are precalculated and introduced into the optimization problem. We solve simultaneously for turbine spacing and cable layout, exploiting the tradeoffs between these wind farm features. We use the Barrow Offshore Wind Farm as a case study to demonstrate realizable savings up to 6 MEUR over the lifetime of the plant, although it is possible that unforeseen design constraints have implications for whether the savings seen in our model are fully realizable in the real world. In addition, the model provides insights on the effects of turbine spacing that can be used to simplify the design process or to support negotiations for surface concession at the earlier stages of a project.     

Estimation of turbulence intensity using rotor effective wind speed in Lillgrund and Horns Rev-I offshore wind farms

Turbulence characteristics of the wind farm inflow have a significant impact on the energy production and the lifetime of a wind farm. The common approach is to use the meteorological mast measurements to estimate the turbulence intensity (TI) but they are not always available and the turbulence varies over the extent of the wind farm. This paper describes a method to estimate the TI at individual turbine locations by using the rotor effective wind speed calculated via high frequency turbine data.The method is applied to Lillgrund and Horns Rev-I offshore wind farms and the results are compared with TI derived from the meteorological mast, nacelle mounted anemometer on the turbines and estimation based on the standard deviation of power. The results show that the proposed TI estimation method is in the best agreement with the meteorological mast. Therefore, the rotor effective wind speed is shown to be applicable for the TI assessment in real-time wind farm calculations under different operational conditions. Furthermore, the TI in the wake is seen to follow the same trend with the estimated wake deficit which enables to quantify the turbulence in terms of the wake loss locally inside the wind farm.