Synthesis of statistical polydiene networks by reaction of liquid polyenes with telechelic siloxanes

The present investigation concerns the synthesis of statistical networks similar to vulcanized rubber. We have used liquid precursor polymers: polybutadiene (PB) and polyisoprene (PI) with telechelic siloxanes. The reactivity of the polydienes can be classified as follows: PB units 1,2 PI units 3,4 PI units 1,4 0. The network formation is a function of the ratio R = nb, of pendent double bonds/nb. of SiH. For R 1 the networks are rather hard and brittle, for 8 R 10 they are soft and elastic, whereas for R 16 the gels obtained are very soft and sticky.     

The role of Ni2+ diffusion on the reducibility of NiO/MgO system: A combined TRP-XPS study

The progressive dissolution of nickel ions in the lattice of MgO matrix, promoted by the calcination temperature, has been monitored using XPS. The reducibility of Ni/MgO catalysts is affected by the modification of the surface chemical composition. TPR peaks have been correlated with several NiO forms. Both XPS and TPR results indicate a different behaviour pattern for the supported and physically mixed NiO/MgO systems, and this has been attributed to the different available contact area between NiO and MgO. The formation of both NiO rich and MgO rich NiO-MgO solid solutions, with the tendency to evolve towards the bulk solid solution, has been invoked to explain the substantial changes in the TPR pattern of the different air calcined systems.     

Postinduction Processes During Thermal Explosion in the Systems “Porous Material–Reactive Gas–Solid Product”

A complete solution of the unsteadystate filtration problem of thermal explosion incorporating the postinduction period is given for the first time. The paper describes a study of the temperaturefield dynamics, poregas pressure, and the degree of condensedphase conversion versus the reactivegas deficiency in a reactive porous material. Focus is on the formation and propagation of frontal regimes of exothermic chemical reactions (their number, direction, and velocity of propagation, degree of condensedphase conversion at the front). The study revealed double selfignition phenomena and combustionwave propagation regimes with incomplete conversion at the front. A surface regime of thermal explosion limited by gas filtration from the outside was considered. The regularities in the dynamics of the exothermic chemical reaction found in the present study allow one to qualitatively control hightemperature synthesis under thermal explosion conditions.     

Specific features of the phase transformations occurring during the sintering process of the beta-alumina based ceramics and their properties

Conclusions During the sintering process of beta-alumina obtained using the method of plasmochemical synthesis, the structural transformation occurs and it is accompanied by the separation of the excess Na₂O and the formation of an intergranular meltlike phase that is saturated with sodium and is characterized by high dielectric properties.The quantity of the meltlike phase and the magnitude of the /( + ) ratio determine the degree of stabilization (stability) and the final resistivity of the material and depend on the initial chemical composition and the heating rate maintained during the sintering process.It was shown that when the duration of residence of the material in the hot zone of the furnace is increased or when the specimens sintered maintaining high heating rates are subjected to additional heat treatment, one observes the occurrance of the reverse structural transformation that is characterized by an increase of the phase ratio /( + ) 1, a reduction in the quantity of the meltlike phase right up to its complete disappearance, and a decrease of the electrical resistivity of the material.In the materials having a large excess quantity of sodium oxide, the process of crystallization of the intergranular NaAlO₂ phase occurs simultaneously with the second phase transformation.The best ceramic and electrophysical parameters were obtained when sintering the material contained 7.9% Na₂O.Translated from Ogneupory, No. 3, pp. 13–18, March, 1990.     

Electrochemical behaviour of viologen-cyclodextrin inclusion complexes. The case of non-alkyl group substituted viologen

The electrochemical behavior of non-alkyl substituted viologen, 4,4-dibenzyl bipyridinium (BzV), 4,4-dicyanophenyl bipyridinium (CyV) and -,-,-cyclodextrin (, , -CD) was studied using cyclic voltammetry and a spectroelectrochemical method. It was found that BzV and Fe(CN) ₆ ^4– formed a charge-transfer (CT) complex with a ratio of 21 and the colour of the solution faded with the addition of an electrolyte. This behaviour is the same as in then-heptyl viologen and ferrocyanide system [1]. BzV, -CD and -CD formed an inclusion complex only in the reduced state, whilst BzV and -CD formed an inclusion complex in both the oxidized and the reduced state. An EC scheme in which a chemical reaction follows an electrochemical reaction was considered to predominate in the BzV and -, -CD systems, while a CE scheme in which a chemical reaction preceded an electrochemical reaction predominated in the BzV and -CD system. On the other hand, CyV was found to form an inclusion complex with -, -, -CD in both the oxidized and the reduced states. therefore a CE scheme was considered to predominate in the CyV--, -, -CD systems.     

Properties ofSrMO 3-δ(M=Fe,Co) as oxygen electrodes in alkaline solution

Strontium ferrates and cobaltates with compositions SrFeO_3- (0.060.40) and SrCoO_3- (0.040.30) were synthesized. The dependence of the oxygen electrode properties on the value was examined in 1 mol dm^–3 KOH solution. In the SrFeO_3- series, the samples with 0.24<<0.29, showed the highest activity in both oxygen evolution and reduction reactions. In contrast, no strong dependence on the value was observed in SrCoO_3-, which also showed a high catalytic activity for oxygen evolution.     

Crystal structure and morphology of electrodeposited zinc-iron binary alloys

Deposits of zinc-iron alloy have been prepared galvanostatically from a sulphate bath and the crystal structure has been determined by X-ray diffraction and transmission electron microscopy measurements. The electrodeposited zinc-iron alloys have metastable structures and the individual phases coexist over wide composition ranges. The phases are identified as (10073 at % zinc), (8748 at % zinc), ₁(7862 at % zinc) and (620 at % zinc). Thec andc/a in the h.c.p. lattice of the -phase decrease continuously with decrease of zinc concentrations, and the latter changes from 1.86 to 1.60 (a andc are the lattice constants of the -phase in the direction of thea- andc-axes, respectively). The -phase particles exhibit a hexagonal plate-like morphology which is thin in the direction of thec-axis. The morphology of the electrodeposits changes from plate-like to pyramidal shape when fine -phase particles (100 nm) start to form surrounding the -phase platelets, and then to lenticular or granular in the /₁ duplex region. The -phase forms in the low zinc concentration region and changes the electrodeposits to a fine cuboidal morphology.     

Ethylene dimerization over a model Sn/Pt(111) catalyst

The dimerization reaction of ethylene was studied over Pt(111) and (3×3)R30°-Sn/ Pt(111) model catalysts at moderate pressures (20–100 Torr). The catalyst surfaces were prepared and characterized in a UHV surface analysis system and moderate pressure catalytic reactions were conducted with an attached batch reactor. The overall catalytic activity of the (3×3)R30°-Sn/Pt(111) surface alloy for C₄ products was slightly higher than that at Pt(111). In addition to the dimerization reaction, hydrogenolysis of ethylene to propane and methane was also observed, with the (3×3)R30°-Sn/Pt(111) surface alloy less active than Pt(111). Among the C₄ products, butenes andn-butane were the major components. Carbon buildup was observed to be significant above 500 K with the (3×3)R30°-Sn/Pt(111) surface alloy much more resistant than Pt(111). The dimerization of ethylene was not eliminated by the presence of surface carbonaceous deposits and even at significant surface coverages of carbon the model catalysts exhibited significant activities. The results are discussed in terms of the surface chemistry of ethylene and the previously reported catalytic reactions of acetylene trimerization andn-butane hydrogenolysis at these surfaces.     

Nucleation and growth kinetics of Ag7NO11 on a platinum single crystal electrode

The process of electrochemical deposition of Ag₇NO₁₁ on a platinum single crystal anode from 5M AgNO₃ is investigated. The nucleation and growth rates are measured at different constant overpotentials. The orientation of the Ag₇NO₁₁ crystals with respect to the substrate surface is determined in the case of deposition on glassy carbon and on the 100, 111 and 110 faces of a platinum single crystal.     

Shock Compression of Hydrocarbons of the General Formula C5H8

The paper reports results of experimental investigation of liquid hydrocarbons having identical elemental compositions but different structures of molecules, initial densities, and heats of formation. Shockcompression temperatures are determined For 1,3pentadiene, methylene cyclobutane, spiropentane, and a solution of benzene with hexane and cyclohexane (which has the same ratio of C/H), and the shock adiabat is determined for 1,3pentadiene. The data obtained are used to refine the expressions for the state parameters of the destruction products of hydrocarbons behind a shockwave front.     

Synthesis of novel telechelic monodispersed nonconjugated dienes

Summary The synthesis of novel telechelic monodispersed nonconjugated dienes from commercially available , -dithiols and dienes is presented. The batch reaction produced a polydispersed. mixture separable with difficulty whereas a dropwise addition of dithiol onto an excess of , -diene in the presence of peroxide led selectively and quantitatively to the addition product: diene-dithiol-diene.     

Structure of the Reaction Zone of a Steady Detonation Wave in Dinitrodiazapentane

The massvelocity profiles in 2,4dinitro2,4diazapentane samples of different densities were registered by a laser interferometer and the electromagnetic technique. The reaction time was shown to reach 300 nsec and weakly depend on density, while the pressure in the chemical spike can be twice as high as that at the Chapman–Jouguet point. No special features due to diamond formation were observed in the massvelocity profiles registered in the chemical reaction zone.     

Heterogeneous asymmetric reactions. 23. Enantioselective hydrogenation of ethyl pyruvate over cinchonine- and α-isocinchonine-modified platinum catalysts

The enantioselective hydrogenation of ethyl pyruvate to (S)-ethyl lactate over cinchonine- and -isocinchonine-modified Pt/Al₂O₃ catalysts was studied as a function of modifier concentration and reaction temperature. The maximum enantioselectivities obtained under the applied mild conditions were 89% ee using cinchonine (0.014 mmoldm^–3, 1 bar H₂, 23°C, 6% AcOH in toluene), and 76% ee in the case of -isocinchonine (0.14 mmoldm^–3, 1 bar H₂, –10°C, 6% AcOH in toluene). Since -isocinchonine of rigid structure exists only in anti-open conformation these data provide additional experimental evidence to support the former suggestion concerning the dominating role of anti-open conformation in these cinchona-modified enantioselective hydrogenations.     

Musk deer (Moschus moschiferus): Reinvestigation of main lipid components from preputial gland secretion

The qualitative and quantitative composition of the principal lipid constituents of Siberian musk deer (Moschus moschiferus) preputial gland secretion, main odor carriers and potential precursors of odorous substances, was investigated by means of high-performance liquid chromatography. Free fatty acids and phenols (10%), waxes (38%), and steroids (38%) were found to be the main groups of the secretion lipids. Cholestanol (I), cholesterol (II), androsterone (III), ⁴-3-hydroxy-17-ketoandrostene (IV), 5, 3-hydroxy-17-ketoandrostane (V), 5, 3, 17-dihydroxyandrostane (VI), 5, 3, 17-dihydroxyandrostane (VII), and 5, 3, 17-dihydroxyandrostane (VIII) were isolated from the steroid fraction and their structures confirmed by IR, PMR, and mass spectra. 3-Methylpentadecanone (muscone) was not identified among the secretion lipids. Preputial gland secretion stimulated sex behavior of musk deer females.     

Unsteady creep equation in refractory materials during monoaxial compression

Conclusions The creep curves for porous refractories under monoaxial compression can be described by the Andrade equation, the parameters of which depend on the nature of the macroscopic structural changes in the material. With significant densification or embrittlement of the specimens in the testing procedure during deformation the degree factor in the equation = P+q, p 1/2; if the structure of the specimen does not undergo marked changes then the degree factor is close to the classic value (p 1/3).Translated from Ogneupory, No. 1, pp. 22–26, January, 1989.     

Sugars in Mediterranean Floral Nectars: An Ecological and Evolutionary Approach

High-pressure liquid chromatography analyses of 73 plant species showed that the nectars of phrygana (East Mediterranean garrigue) mainly contain sucrose, glucose, and fructose, and traces of 10 minor sugars. Although the sucrose/hexose ratio was not related to plant life habit, ecological constraints had a detectable effect in shaping sugar composition. This was detected by distinguishing the phryganic plant species into spring–summer and winter flowering, with the distinction made on the basis of the water deficit in the study area. Plants flowering in spring–summer had a higher rate of high sucrose (i.e., sucrose/hexose ratio 0.5; 60.8% of the plant species) vs. low hexose nectars (i.e., ratio <0.5; 39.2%). The ratio was reversed in winter flowering species (36.4% vs. 63.6% with high sucrose and high hexose, respectively). Sucrose/hexose ratios were associated with plant family. The highest values were those of Lamiaceae, which differed significantly from the low sucrose Liliaceae and Apiaceae. Based on recorded plant–pollinator interactions in the community, the present data provide evidence of a partitioning of nectar resources by the existing pollinator guilds within the community, based on the sugar profiles of nectar (all sucrose/hexose ratios for all interactions). Among all major groups, bees and wasps (aculeates) preferred high sucrose nectars, which differed significantly from syrphids, anthomyid a.o. flies, and beetles that visited low sucrose nectars. Similarly, butterflies visited lower sucrose nectars compared to bees. Within families, only Megachilidae could be clearly characterized as high sucrose consumers, differing in this respect from all the remaining insect groups including most other bee families. This confirms previous findings that Megachilidae have a key position in Mediterranean communities where they probably constitute a selective factor for high sucrose nectars.     

Studies on electrical conductivity of gamma irradiated polyaniline

Summary de electrical conductivity at surface of -irradiated polyaniline (PAn) has been studied. EPR spectroscopic results indicate that the variation of spin concentration is consistent with the increase of _de. Electrical conductivity (_de) versus temperature (T) characteristics of unirradiated and irradiated PAn were performed, which demonstrate that the unirradiated curve can fit to ln_deT₁, while the irradiated curve fit to ln_deT_1/4.     

Soldier defense secretions of malaysian free-ranging termite of the genusLacessititermes (Isoptera,Nasutitermitinae)

Soldiers of free-ranging termites of the genusLacessititermes (Isoptera, Nasutitermitinae) secrete from their frontal glands a mixture of monoterpenes, sesquiterpenes, and diterpenes.Lacessititermes ransoneti, L. laborator, andL. species A produce species-specific secretions, the composition being most complex forL. laborator. Apart from known mono- and dihydroxytrinervitadienes, the following new diterpenes were isolated and tentatively assigned as trinervita-1(15),8(19)-dien-2,3,9,14-tetraol 2,3,14-O-triacetate, trinervita-1(15),8(19)-dien-2,3,9,14-tetraol 2,3,14-O-triacetate, 2,3,9, 14-tetraacetoxy-1 (15), 8(19)-trinervitadiene, and 2,3,11,13-tetraacetoxy-1(15),8(19)-trinervitadiene. Data on intragenus chemical variations were subjected to canonical discriminant analysis and genetic distances among the species were calculated to depict intragenus identities and affinities.     

Syntheses and optical properties of <Emphasis Type="Italic">α</Emphasis>- and <Emphasis Type="Italic">β</Emphasis>-cyano-poly(<Emphasis Type="Italic">p</Emphasis>-phenylene vinylene) derivatives

Two light emitting molecules with the cyano group at different positions on the vinylene i.e., 2,5-bis(2-thienyl-1-cyanovinyl)-1-(2_-ethylhexyloxy)-4-methoxybenzene (-TPT) and 2,5-bis(2-thienyl-2-cyanovinyl)-1-(2-ethylhexyloxy)-4-methoxybenzene (-TPT), and corresponding polymers, i.e., poly[2,5-bis(2-thienyl-1-cyanovinyl)-1-(2-ethylhexyloxy)-4-methoxybenzene] (denoted as P1) and poly[2,5-bis(2-ethienyl-2-cyanovinyl)-1-(2-ethylhexyloxy)-4-methoxybenzene] (denoted as P2) were synthesized. -TPT and -TPT, respectively, were blended into two host polymers, poly(methyl methacrylate (PMMA) and poly(9-vinylcarbazole) (PVK), to study the optical properties of the dopants in different host polymer matrices. Although -TPT and -TPT have the same backbone structure, their optical properties are much different. The PL emission maximum ( _max) of -TPT was found blue-shifted, compared with that of -TPT, while the PL intensity of -TPT was stronger than that of -TPT. Concentration effect in the optical properties was found, 1 wt% of -TPT in PVK had the maximum fluorescent emission.The PL maximum peak wavelengths for polymer films (P1 and P2) were found red-shifted; while their PL intensities were weaker when compared with those of blends.     

Model Detonation of Solid Explosives by the Homogeneous Mechanism

A twophase detonation model of solid porous explosives, which takes into account the compression of solidstate particles and the presence of a solid component in detonation products, is developed. The homogeneous detonation mechanism based on the Arrheniustype reaction is studied. Detonation is initiated by the region of highpressure and hightemperature gases modeling the detonator explosion. A numerical experiment confirms that there exists an initiationpressure limit below which no homogeneous mechanism of detonation is active. The detonation wave has the leading front in which the explosive is precompacted and the gas in the porous volume is compressed up to a pressure of 100 GPa without any significant change in particle density. Then the gas compresses the particles themselves up to the pressure and temperature of the thermal explosion. As a result, the leading front is followed (after a certain delay) by a narrow reaction zone where detonation products are formed with a further increase in pressure.