聚乙烯醇/蒙脱石纳米复合材料的结构与性能

通过溶液插层 流延成膜法,以聚乙烯醇和钠质蒙脱石为原料,制备出了不同蒙脱石含量的聚乙烯醇/蒙脱石纳米复合材料薄膜。用X射线衍射(XRD)、扫描电子显微镜(SEM)、热重分析(TGA)和力学性能测试对复合材料的结构和性能进行了表征。结果表明,聚乙烯醇分子成功进入蒙脱石的层间,实现了在纳米尺度上的复合;蒙脱石含量高于7 5wt%形成插层型的纳米复合材料,低于7 5wt%形成剥离型的纳米复合材料;在SEM图片上还观察到了纳米复合材料的微观结构。纳米复合材料的热稳定性、拉伸强度和直角撕裂强度均比纯聚乙烯醇有很大提高。     

麦羟硅钠石/聚合物纳米复合材料研究进展

麦羟硅钠石（magadiite）是一种新型的层状纳米硅酸盐材料,由于其具有制备工艺简单、比表面积大、阳离子交换性能高、吸附性能强、层间膨胀性能好等优点,成为纳米材料提升聚合物性能最具有发展潜力的材料之一。本文主要综述了麦羟硅钠石/聚合物纳米复合材料的常用制备方法及其优缺点,包括聚合物插层法、单体原位插层聚合法、锚固插层聚合法。浅谈了国内外利用3种方法制备的基于聚苯乙烯、聚丙烯、环氧树脂、尼龙6、聚己内酯和聚甲基丙烯酸甲酯等多种聚合物的麦羟硅钠石/聚合物纳米复合材料,对在纳米复合材料结构中出现界面不相容、麦羟硅钠石分布不均匀的问题提出了解决方法,并阐述了麦羟硅钠石对纳米复合材料结构和性能的影响,最后展望了麦羟硅钠石/聚合物纳米复合材料的发展前景。     

有机蒙脱土/热塑性聚氨酯的制备及对性能的影响

以Gemini双阳离子表面活性剂插层钠基蒙脱土制备了具有不同层间距的有机蒙脱土(OMMT)并用于热塑性聚氨酯(TPU)的改性,考察了OMMT的层间距及用量对该纳米复合材料的热性能和力学性能的影响.DSC结果表明,随着OMMT层间距的增大,软段Tg升高,硬段Tg降低.力学性能结果表明,OMMT的层间距越大,力学性能越好,...     

聚乳酸/层状硅酸盐纳米复合材料研究进展

介绍了聚乳酸/层状硅酸盐纳米复合材料研究进展,阐述了其制备方法如原位聚合插层法、溶液插层法、熔融插层法等,详述了聚乳酸添加纳米层状硅酸盐后结构与性能的变化,包括复合材料的微观结构、结晶性能、热性能、力学性能、流变性能、加工性能、阻隔性能、阻燃性能的变化。研究表明,采用不同的制备方法如原位聚合插层法、溶液插层法、熔融插层法等能制得插层型、剥离型以及插层与剥离混合型聚乳酸/层状硅酸盐纳米复合材料;添加纳米层状硅酸盐后,得到的聚乳酸/层状硅酸盐纳米复合材料结晶速率提高,结晶度增加,说明层状硅酸盐起到了成核剂的作用;热稳定性、拉伸模量和冲击强度、阻透性能和阻燃性能都有不同程度提高;流变性能也得到改善。     

改性蒙脱石增强增韧环氧树脂纳米复合材料性能研究

采用有机蒙脱石改性环氧树脂,利用插层复合技术制备出了纳米级的环氧树脂／蒙脱石复合材料;测试了其力学性能和热性能。并通过X射线衍射（XRD）、动态力学性能测试（DMA）等手段研究了复合材料的微观结构和动态力学行为。研究结果表明：力学性能实现了增韧增强,抗冲击强度提高了60．67％,抗张强度提高了11．78％,热变形温度也提高了8．7℃。     

聚乙烯醇/蒙脱石纳米复合材料的制备与表征

以钠质蒙脱石和聚乙烯醇为原料,通过溶液插层-流延成膜法制备不同蒙脱石质量分数的聚乙烯醇/蒙脱石纳米复合材料薄膜。用X射线衍射(XRD)、扫描电子显微镜(SEM )和热重分析(TGA)对复合材料的结构进行了表征。结果表明,聚乙烯醇分子成功进入蒙脱石的层间,实现了在纳米尺度上的复合;蒙脱石质量分数高于7 5%形成插层型的纳米复合材料,低于7 .5%的形成剥离型的纳米复合材料;纳米复合材料的热稳定性比纯聚乙烯醇有较大提高。     

有机改性蒙脱石在有机介质中的分散性研究进展

介绍了有机蒙脱石在聚合物纳米复合材料制备中的应用,采用阳离子、阴离子和非离子表面活性剂改性的有机蒙脱石在有机介质中的分散性能的研究,并探讨了有机蒙脱石在有机介质中的分散机理,最后对提高有机改性蒙脱石的分散性能在未来的研究方向进行了展望。     

有机改性蒙脱石在有机介质中的分散性研究进展

介绍了有机蒙脱石在聚合物纳米复合材料制备中的应用,采用阳离子、阴离子和非离子表面活性剂改性的有机蒙脱石在有机介质中的分散性能的研究,并探讨了有机蒙脱石在有机介质中的分散机理,最后对提高有机改性蒙脱石的分散性能在未来的研究方向进行了展望。     

聚丙烯/水滑石纳米复合材料制备及性能研究

针对聚合物/水滑石(LDH)纳米复合材料传统制备方法中存在的问题,采用球磨改性工艺制备聚丙烯(PP)/LDH纳米复合材料以期改进填充物在基体中的剥离和插层,重点研究了PP/LDH纳米复合材料的结构、力学性能。XRD分析表明,球磨工艺在对LDHs进行有机插层改性的同时实现了PP分子链的插层;所制备的PP/LDHs纳米复合材料其综合力学性能明显优于常规方法制备的复合材料。     

复配改性黏土/丁腈橡胶纳米复合材料的结构及性能

用不同阴离子表面活性剂十二烷基磺酸钠(SDS)和十二烷基苯磺酸钠(SDBS)与阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)复配改性无机黏土,制备了有机改性黏土/丁腈橡胶(NBR)纳米复合材料,并表征了有机黏土与纳米复合材料,考察了不同表面活性剂及配比对纳米复合材料物理机械性能的影响。结果表明,CTAB/SDS复配改性黏土/NBR纳米复合材料的层间距比CTAB改性黏土/NBR纳米复合材料增加了1.15 nm,具有更多的插层结构,橡胶基体中黏土颗粒分布细致、均匀,且黏土片层间无聚集体存在;CTAB/SDS复配改性黏土/NBR纳米复合材料的物理机械性能优于CTAB/SDBS复配改性黏土/NBR纳米复合材料及CTAB改性黏土/NBR纳米复合材料,且当CTAB/SDS(质量比)为4∶2时,纳米复合材料的拉伸强度、撕裂强度及扯断伸长率出现最大值,其中,拉伸强度和撕裂强度较CTAB改性黏土/NBR纳米复合材料分别提高了62.7%和12.3%。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。