DISCRETE EVENT-DYNAMIC SYSTEMS FOR MODELING DYNAMIC VALUED NETS

The last few years have seen the development of Discrete Event-Dynamic Net Systems^1,2 as instruments for modeling complex systems. They are able to achieve the following objectives:

—formality of the modeling methodology

—ability to model static and dynamic aspects

—ability to pass between levels of differently rich structures by morphisms

—uniform representation of the communication process as

—an information process

—a decision process and

—a control process

—homogeneity of the representation and modeling methods

—ability to derive qualitative and quantitative statements.

The foundation is provided by a Discrete Event-Dynamic Net System which includes the axiomatic declaration of general Petri nets. In order to calculate the structural and dynamic aspects, so-called Petri net machines are developed. It is shown that this approach can even be used to treat the following aspects:

—use of time during the process

—increase of costs during the generation and transportation of information

—augmentation, evaluation and transformation of information objects.

Recursive formulas are derived and some examples calculated.     

Anthropometric characteristics of Chilean workers for ergonomic and design purposes

Obtaining an appropriate match between a product and its end-users requires anthropometric data, which are typically outdated and show variations among different countries. Chile had its anthropometric data taken nearly 20 years ago, thus they are probably outdated. The purpose of this article is to describe some anthropometric characteristics of Chilean workers. An anthropometric survey involving 27 measures and five calculated body dimensions was conducted in 2016. The measurements were based on ISO 7250 and ISO 15535 to ensure the highest standards possible, and a total of 2946 workers, aged from 18 to 76 years old, participated in the survey. The results showed that Chilean workers have smaller dimensions than Dutch and US workers but have larger dimensions than South Koreans. The data presented in this article constitute the most up-to-date anthropometric dataset describing the dimensions of Chilean workers.

Practitioner Summary: In Chile, women are smaller and weigh less than men, and both of these populations have high body mass index (BMIs). In addition, the Chilean population exhibits substantial differences compared with other international adult populations. The data presented in this article should be used as a reference when designing for Chilean workers.     

A METHODOLOGY OF COORDINATION IN JAPANESE COMPANY-WIDE QUALITY CONTROL

In the practice of Japanese company-wide quality control, some tools which help us to coordinate company-wide activities are developed. One of the main functions of these tools is to organise the diversified information related to the company-wide activities

This report discusses the basic recognition underlying the use of these tools, and presents on a conceptual level an essential philosophy and methodology of coordinating company-wide activities

The basic idea of this report is to make an additional subsystem which helps us to organize the diversified information of activities in order to coordinate activities easily.     

Using subject-specific three-dimensional (3D) anthropometry data in digital human modelling: case study in hand motion simulation

Digital human modelling enables ergonomists and designers to consider ergonomic concerns and design alternatives in a timely and cost-efficient manner in the early stages of design. However, the reliability of the simulation could be limited due to the percentile-based approach used in constructing the digital human model. To enhance the accuracy of the size and shape of the models, we proposed a framework to generate digital human models using three-dimensional (3D) anthropometric data. The 3D scan data from specific subjects’ hands were segmented based on the estimated centres of rotation. The segments were then driven in forward kinematics to perform several functional postures. The constructed hand models were then verified, thereby validating the feasibility of the framework. The proposed framework helps generate accurate subject-specific digital human models, which can be utilised to guide product design and workspace arrangement.

Practitioner Summary: Subject-specific digital human models can be constructed under the proposed framework based on three-dimensional (3D) anthropometry. This approach enables more reliable digital human simulation to guide product design and workspace arrangement.     

The Proactive and Preventive Privacy (3P) Framework for IoT Privacy by Design

The Problem

Internet of Things (IoT) is providing new services and insights by sensing contextual data but there are growing concerns of privacy risks from users that need immediate attention.

The Reason

The IoT devices and smart services can capture Personally Identifiable Information (PII) without user knowledge or consent. The IoT technology has not reached the desired level of maturity to standardize security and privacy requirements.

The Solution

IoT Privacy by Design is a user-centric approach for enabling privacy with security and safety as a ‘win-win’ positive outcome of IoT offerings, irrespective of business domain. The Proactive and Preventive Privacy (3P) Framework proposed in this paper should be adopted by the IoT stakeholders for building trust and confidence in end users about IoT devices and smart services.     

Dissemination and use of a participatory ergonomics guide for workplaces

Musculoskeletal disorders (MSDs) result in lost-time injury claims and lost productivity worldwide, placing a substantial burden on workers and workplaces. Participatory ergonomics (PE) is a popular approach to reducing MSDs; however, there are challenges to implementing PE programmes. Using evidence to overcome challenges may be helpful but the impacts of doing so are unknown. We sought to disseminate an evidence-based PE tool and to describe its use. An easy-to-use, evidence-based PE Guide was disseminated to workplace parties, who were surveyed about using the tool. The greatest barrier to using the tool was a lack of time. Reported tool use included for training purposes, sharing and integrating the tool into existing programmes. New actions related to tool use included training, defining team responsibilities and suggesting programme implementation steps. Evidence-based tools could help ergonomists overcome some challenges involved in implementing injury reduction programmes such as PE.

Practitioner Summary

Practitioners experience challenges implementing programmes to reduce the burden of MSDs in workplaces. Implementing participatory interventions requires multiple workplace parties to be ‘on-board’. Disseminating and using evidence-based guides may help to overcome these challenges. Using evidence-based tools may help ergonomics practitioners implement PE programmes.     

A statistical model including age to predict passenger postures in the rear seats of automobiles

Few statistical models of rear seat passenger posture have been published, and none has taken into account the effects of occupant age. This study developed new statistical models for predicting passenger postures in the rear seats of automobiles. Postures of 89 adults with a wide range of age and body size were measured in a laboratory mock-up in seven seat configurations. Posture-prediction models for female and male passengers were separately developed by stepwise regression using age, body dimensions, seat configurations and two-way interactions as potential predictors. Passenger posture was significantly associated with age and the effects of other two-way interaction variables depended on age. A set of posture-prediction models are presented for women and men, and the prediction results are compared with previously published models. This study is the first study of passenger posture to include a large cohort of older passengers and the first to report a significant effect of age for adults. The presented models can be used to position computational and physical human models for vehicle design and assessment.

Practitioner Summary:

The significant effects of age, body dimensions and seat configuration on rear seat passenger posture were identified. The models can be used to accurately position computational human models or crash test dummies for older passengers in known rear seat configurations.     

The influence of cooling forearm/hand and gender on estimation of handgrip strength

Handgrip strength is essential in manual operations and activities of daily life, but the influence of forearm/hand skin temperature on estimation of handgrip strength is not well documented. Therefore, the present study intended to investigate the effect of local cooling of the forearm/hand on estimation of handgrip strength at various target force levels (TFLs, in percentage of MVC) for both genders. A cold pressor test was used to lower and maintain the hand skin temperature at 14°C for comparison with the uncooled condition. A total of 10 male and 10 female participants were recruited. The results indicated that females had greater absolute estimation deviations. In addition, both genders had greater absolute deviations in the middle range of TFLs. Cooling caused an underestimation of grip strength. Furthermore, a power function is recommended for establishing the relationship between actual and estimated handgrip force.

Statement of relevance: Manipulation with grip strength is essential in daily life and the workplace, so it is important to understand the influence of lowering the forearm/hand skin temperature on grip-strength estimation. Females and the middle range of TFL had greater deviations. Cooling the forearm/hand tended to cause underestimation, and a power function is recommended for establishing the relationship between actual and estimated handgrip force.

Practitioner Summary: It is important to understand the effect of lowering the forearm/hand skin temperature on grip-strength estimation. A cold pressor was used to cool the hand. The cooling caused underestimation, and a power function is recommended for establishing the relationship between actual and estimated handgrip force.     

THEORY OF CYBERNETIC AND INTELLIGENT MACHINE BASED ON LIE COMMUTATORS

Many attempts^{1, 7, 8, 35} have been made to overcome the limit imposed by the Turing Machine³⁴ to realise general mathematical functions and models of (physical) phenomena.

They center around the notion of computability.

In this paper we propose a new definition of computability which lays the foundations for a theory of cybernetic and intelligent machines in which the classical limits imposed by discrete algorithmic procedures are offset by the use of continuous operators on unlimited data. This data is supplied to the machine in a totally parallel mode, as a field or wave.

This theory of machines draws its concepts from category theory, Lie algebras, and general systems theory. It permits the incorporation of intelligent control into the design of the machine as a virtual element. The incorporated control can be realized in many (machine) configurations of which we give three:

a) a quantum mechanical realization appropriate to a possible understanding of the quantum computer and other models of the physical microworld,

b) a stochastic realization based on Kolmogorov-Gabor theory leading to a possible understanding of generalised models of the physical or thermodynamic macroworld, and lastly

c) a classical mechanical realization appropriate lo the study of a new class of robots.

Particular applications at a fundamental level are cited in geometry, mathematics, biology, acoustics, aeronautics, quantum mechanics, general relativity and. Markov chains. The proposed theory therefore opens a new way towards understanding the processes that underlie intelligence.     

A THEORETICAL STUDY ON ADAPTIVE QUALITY CONTROL SYSTEMS

This paper is a study of an adaptive quality control system from a viewpoint of quality goal. The main purpose is to introduce a conceptual framework for setting up quality goals which are in accordance with the external environment and internal capacity of quality control systems. We apply a mathematical general systems approach.

The results of our paper are summarized as follows:

1)As important decision-making in adaptive QCS, the decision-making for estimalion of fitness and examination of attainability are proposed and formalized mathematically.

2)A refinement process is formalized in which models are revised according to the changes of market.

3)Basic steps for setting quality goals are obtained which are based on the above formalization.     

A survey of anthropometry and physical accommodation in ergonomics curricula

The size and shape of users are an important consideration for many products and environments. Designers and engineers in many disciplines must often accommodate these attributes to meet objectives such as fit and safety. When practitioners have academic training in addressing these issues, it is typically through courses in Human Factors/Ergonomics (HF/E). This paper investigates education related to physical accommodation and offers suggestions for improvement. A survey was conducted wherein 21 instructors at 18 universities in the United States provided syllabi for 29 courses, which were analysed to determine topics related to anthropometry and resources used for the courses. The results show that within the US, anthropometry is covered in the majority of courses discussing physical ergonomics, but important related concepts were often omitted (e.g. digital human modelling, multivariate accommodation and variability across global populations). Curricula could be improved by incorporating more accurate anthropometry, multivariate problems and interactive online tools.

Practitioner Summary: This paper describes a study investigating collegiate ergonomics courses within the US in the area of physical accommodation. Course schedules and texts were studied for their treatment of several topics related to accommodating the spatial requirements (anthropometry) of users. Recommendations are made for improving course curricula.     

Developing measures for information ergonomics in knowledge work

Information ergonomics is an evolving application domain of ergonomics focusing on the management of workload in the real-world contexts of information-intensive tasks. This study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, five key dimensions of information ergonomics were identified: contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity. In total, 24 measures focusing on the above dimensions were constructed. The measures include, for example, the number of fragmented work tasks per work day. The measures were preliminarily tested in two Finnish organisations, making use of empirical data gathered by interviews, electronic questionnaires and log data applications tracking work processes on personal computers. The measures are applicable to the evaluation of information ergonomics, even though individual measures vary with regard to the amount of work and time needed for data analysis.

Practitioner Summary:

The study introduces a method for the evaluation of information ergonomics in knowledge work. To this end, 24 measures were constructed and tested empirically. The measures focus on contextual factors of knowledge work, multitasking, interruptions at work, practices for managing information load, and perceived job control and productivity.     

The development of anti-heat stress clothing for construction workers in hot and humid weather

The purpose of this study was to develop anti-heat stress clothing for construction workers in hot and humid weather. Following DeJonge’s functional clothing design process, the design situation was explored, including clothing fabric heat/moisture transporting properties and UV protection and the aspects of clothing ergonomic design (mobility, convenience, and safety). The problem structure was derived from the results of the surveys in three local construction sites, which agreed well with the task requirements and observations. Specifications were consequently described and 30 commercially available fabrics were identified and tested. Fabric testing data and design considerations were inputted in S-smart system to predict the thermal functional performance of the clothing. A new uniform prototype was developed and evaluated. The results of all measurements suggest that the new uniform which incorporated fabrics with superior heat/moisture transporting properties and loose-fitting design could reduce the workers’ heat stress and improve their comfort and work performance.

Practitioner Summary:

The construction workers’ uniform currently used in Hong Kong during summer was unsatisfactory. Following DeJonge’s functional clothing design process, an anti-heat stress uniform was developed by testing 30 fabrics and predicting clothing thermal functional performance using S-smart system. The new uniform could reduce the workers’ heat stress and improve their comfort and work performance.     

A comfort assessment of existing cervical orthoses

Purpose: Identify location and intensity of discomfort experienced by healthy participants wearing cervical orthoses.

Method: Convenience sample of 34 healthy participants wore Stro II, Philadelphia, Headmaster, and AspenVista^® cervical orthoses for four-hour periods. Participants reported discomfort level (scale 0–6) and location.

Results: Participants reported mean discomfort for all orthoses over the four-hour test between ‘a little discomfort’ and ‘very uncomfortable’ (mean discomfort score = 1.64, SD = 1.50). Seven participants prematurely stopped tests due to pain and six reported maximum discomfort scores. Significant linear increase in discomfort with duration of wear was found for all orthoses. Significantly less discomfort was reported with Stro II than Headmaster and Philadelphia. Age correlated with greater perceived discomfort. Orthoses differed in the location discomfort was experienced.

Conclusion: Existing cervical orthoses cause discomfort influenced by design and duration of wear with orthoses’ design the more significant factor. This work informed the design of a new orthosis and future orthoses developments.

Practitioner Summary: The purpose of this study was to gain greater knowledge about the discomfort caused by wearing of existing neck orthoses in order to inform the design and development of a new neck orthosis. This study gathers empirical data from a surrogate population and concludes that orthosis design is more influential than the duration of wear.     

Book reviews

Computer Software: legal protection in the United Kingdom Henry Carr & Richard Arnold, 1992 London: Sweet & Maxwell, 2nd ed, xv + 312 pp., £45.00 (hardback)

Advanced Information Systems for Lawyers V. Mital & L. Johnson, 1992 London: Chapman & Hall. pp. 306, £35.00

Law of Contract Laurence Koffman & Elizabeth MacDonald, 1992 London: Fourmat Publishing, 430 pp., paperback £22.50

The Electronic Media and the Transformation of Law M. Ethan Katsh, 1991 Oxford: Oxford University Press. £13.95     

Book reviews

Crime and the Computer, Martin Wasik, 1991, Oxford: Clarendon Press. £35.00.

Yearbook of Law, Computers and Technology, Volume 5. K.V. Russell (Ed.), 1991. London: Butterworths. £29.50.

Computers, Artificial Intelligence and the Law. Mervyn E. Bennun (Ed.), 1991. London: Ellis Horwood. xx +132 (including bibliography & index), £26.50

Modelling Legal Argument: reasoning with cases and hypotheticals. Kevin D. Ashley, 1990. Cambridge: MIT Press. 329 pp.     

The Observer-Generated Information Process: Composite Stages,Cooperative “Logical” Structure,and Self-Organization

Conventional information science generally considers an information process, but traditionally uses the probability measure for random events, and Shannon’s entropy measure as an uncertainty function of the states. The cutting process on separated states decreases quantity information concealed in the states correlation, holding hidden process information.

Up to now, “information process” has not had a scientifically conclusive definition nor its implicit structure.

The presenting information process performs logical operations with discrete information units (Bits) to achieve a goal, integrating the discrete mutually connected sequence of symbols and the extracting process’ hidden information in the structure of an information Observer. The probing time-space observation develops the unit of space-time geometry-memorizing logic.

The defined information process starts generating observations of a random process via the logic of probing impulses, sequentially cutting the process entropy measure and creating the discrete information units whose integration enfolds the information geometrical structure of an Observer. Found composite stages of the information process and the synthesized optimal process trajectory minimize observation time in an artificially designed information Observer with intellectual searching logic. The analytical modeling, computer simulations, and experimental applications validate the results.     

Push Notifications in Diet Apps: Influencing Engagement Times and Tasks

Background: Smartphones have reached levels of popularity and penetration where they are now suitable for use in population health interventions. A key feature of smartphones is push notification or in app messaging service, which can be used to alert users to messages or instructions pertaining to an installed app. Little evidence exists as to the persuasive power of these messages.

Method: We conducted a 24-week live user evaluation of push notifications used in a behavior-based mobile app for a meal replacement program to understand the role of push notifications in persuading users to engage with self-monitoring tasks.

Results: User perception of the prompts were verified through questionnaires, which in conjunction with the interaction logs show that users were tolerant of multiple daily prompts. The decline in compliance to the tasks set, however, shows that while the participants did not object to receiving prompts, they were less likely to respond to them as the study progressed.

Conclusions: Push notifications and user tasks are appropriate mechanisms to engage users with mobile technology in the short term.     

Book reviews

Electronic Finance Law Chris Reed, 1993 Hemel Hempstead: Woodhead‐Faulkner. 450 pp. £50.00

Introduction to Computer Law, 2nd Edn David I. Bainbridge, 1993 London: Pitman £18.99

Deontic Logic in Computer Science: normative system specification John‐Jules CH. Meyer & Roel J. Wieringa, 1993 London: John Wiley £34.95, xiv + 317pp.     

DEVELOPMENT OF AN AUTOMATIC OBJECT-ORIENTED CONTINUOUS SIMULATION ENVIRONMENT

The construction of automatic control and modelling environments has been attempted using shallow reasoning expert systems. The inadequacy of this approach for real-life systems has become apparent, and the need for deeper knowledge—which can only be obtained by extensive simulation—is now acknowledged.

The simulation process, which consists of model building and model selection, followed by the generation and execution of a software simulator, can be partially automated if an Object-Oriented methodology is adopted. In this article, a methodology is presented, which is presently under investigation in the DESiRE (Dynamic Expert Systems in Robotic Experimentation)project

In the modelling phase, a hierarchical, uniform way of describing and manipulating continuous and discrete models is needed, if the highly desirable reusability of submodels is to be achieved. This is only possible if a clear distinction is made between bare models (and information about their intrinsic coupling) and causal simulation experiment-related data.

In the simulation phase, before generating numerical simulation code, a symbolic reduction of the continuous parts of the model is performed, thus eliminating inaccuracy introduced by the untimely application of possibly unstable numerical algorithms.

Finally, from the reduced representation, executable simulator-objects are produced for use in a distributed environment.