共查询到20条相似文献,搜索用时 31 毫秒
1.
S. Yao X. Han Y. Yang Yiming Rong S. H. Huang D. W. Yen G. Zhang 《The International Journal of Advanced Manufacturing Technology》2007,32(1-2):205-217
Setup planning plays a crucial role in CAPP to ensure product quality while maintaining acceptable manufacturing cost. The
tasks of setup planning include identifying manufacturing features and corresponding manufacturing processes, determining
the number of setups, part orientation, locating datum and process sequence in each setup, and selecting machine tools and
fixtures. An automated setup planning technique and system has been developed based on not only the tolerance analysis, but
also the manufacturing resource capability analysis. The automated setup planning is divided into two levels: setup planning
in single part level and in machine station level. Algorithms for setup generation and process sequencing have been developed
and a case study of setup planning is presented. 相似文献
2.
Alluru Gopala Krishna K. Mallikarjuna Rao 《The International Journal of Advanced Manufacturing Technology》2006,29(1-2):159-164
Computer-aided process planning (CAPP) forms an important interface between Computer-aided design (CAD) and Computer-aided
manufacturing (CAM). It is concerned with determining the sequence of individual manufacturing operations required to produce
a product as per technical specifications given in the part drawing. Any sequence of manufacturing operations that is generated
in a process plan cannot be the best possible sequence every time in a changing production environment. As the complexity
of the product increases, the number of feasible sequences increases exponentially, and there is a need to choose the best
among them. This paper presents an application of a newly developed metaheuristic called the ant colony algorithm as a global
search technique for the quick identification of the optimal operations sequence by considering various feasibility constrains.
A couple of case studies are taken from the literature to comparing the results obtained by the proposed method. 相似文献
3.
Process planning is the function within a manufacturing facility that establishes the machining processes and parameters to
be used so as to convert a piece-part from its initial form to the final form predetermined on an engineering drawing. Computer-aided
process planning (CAPP) has become a major focus of manufacturing automation as it forms the interface between computer-aided
design (CAD) and computer-aided manufacturing (CAM). Issues in CAPP include part representation, process selection, alternative
process-plan generation, intermediate surface and tolerance determination, and operation sequencing. This paper focuses on
quantitative models for determining cutting dimensions and tolerances for intermediate surfaces, and on a heuristic for sequencing
cutting operations. 相似文献
4.
Manish Kumar Sunil Rajotia 《The International Journal of Advanced Manufacturing Technology》2006,28(1-2):109-116
Today’s manufacturing systems are striving for an integrated manufacturing environment. To achieve truly computer-integrated
manufacturing systems (CIMS), the integration of process planning and production scheduling is essential. This paper proposes
a framework for integration of process planning with production scheduling in a job shop environment for axisymmetric components.
Based on the design specifications of incoming parts, feasible process plans are generated taking into account the real time
shop floor status and availability of machine tools. The scheduling strategy prioritizes the machine tools based on cost considerations. 相似文献
5.
Sajad Kafashi 《The International Journal of Advanced Manufacturing Technology》2011,56(5-8):589-600
Process planning is an essential component for linking design and manufacturing process. Setup planning and operation sequencing are two most important functions in the implementation of CAD/CAPP/CAM integration. Many researches solved these two problems separately. Considering the fact that the two functions are complementary, it is necessary to integrate them more tightly so that performance of a manufacturing system can be improved economically and competitively. This paper presents a generative system and genetic algorithm (GA) approach to process plan the given part. The proposed approach and optimization methodology analysis constraints such as TAD?(tool?approach?direction), tolerance relation between features and feature precedence relations to generate all possible setups and operations using workshop resource database. Tolerance relation analysis has a significant impact in setup planning for obtaining the part accuracy. Based on technological constraints, the GA algorithm approach, which adopts the feature-based representation, simultaneously optimizes the setup plan and sequence of operations using cost indices. Case studies show that the developed system can generate satisfactory results in optimizing the integrated setup planning and operation sequencing in feasible condition. 相似文献
6.
Angus Jeang Toly Chen Huan-Chung Li Francois Liang 《The International Journal of Advanced Manufacturing Technology》2007,33(11-12):1159-1172
Conventional process planning of manufacturing operations presets fixed process means and process tolerances for all operations and allows outputs to be distributed around these fixed values, as long as the final outputs meet acceptable specifications. Most of these approaches consider process means and process tolerances to be independent decision variables in process planning with the resultant process means equal or close to the design targets of the blueprint dimensions. Furthermore, these approaches assume that process variability is small in comparison to the quality requirement, and that the phenomena of process shifting or deterioration are not factors of manufacturing operations. For these reasons, conventional approaches to process planning are inappropriate for high value, and precision manufacturing process, particularly of a complex part. Hence, this study introduces a process optimization model which considers process means and process tolerances simultaneously, with sequential operation adjustment to reduce process variability, and with part compensation to offset process shifting. 相似文献
7.
Manish Kumar Sunil Rajotia 《The International Journal of Advanced Manufacturing Technology》2006,30(11-12):1144-1153
Scheduling is one of the most important issues in operations planning of a manufacturing system. In this paper a new scheduling strategy based on machine cost considerations has been proposed. A scheduling factor based on initial cost of a machine and its running cost has been developed. A scanning procedure has been implemented which prioritizes eligible workstations for each setup of a job based on the scheduling factor. Two measures of performance—idleness factor and idleness cost factor—have been developed. Computer simulation has been used to investigate the impact of various decision parameters on operating behavior of the system. 相似文献
8.
S. Bansal S. Nagarajan N. Venkata Reddy 《The International Journal of Advanced Manufacturing Technology》2008,38(5-6):501-513
Fixture planning is an important aspect of process planning. The steps involved in automatic fixture planning are manufacturing feature recognition, setup planning and fixture configuration planning. In the present work, an integrated setup and fixture planning system is developed for minimum tolerances at critical regions using a data exchanged part model as an input. A platform-independent STEP-based automatic feature recognition system that can recognize both design and manufacturing features, including intersecting features is implemented. An automatic setup planning module is developed for generating setup plans for complete machining of a given component. A fixture planning module is developed applying the criteria of uniqueness, stability, accessibility and tolerance minimization. A case study is presented to demonstrate the capabilities and integration between the various modules of the system. 相似文献
9.
Angus Jeang 《The International Journal of Advanced Manufacturing Technology》2011,55(5-8):675-687
This paper introduces a mathematical model of tolerance chart balancing for machining process planning under complete inspection. The criteria considered in this study are based on the combined effects of manufacturing cost and quality loss, under constraints such as process capability limits, product design specifications, and product quality requirements. Manufacturing costs include the machining cost, part cost, inspection cost, reworking cost, and replacement cost. The machining cost is expressed in geometrical decreasing functions, which represent tolerances to be assigned. Process variability is expressed in quadratic loss functions, which represent the deviation between the part measurement and the target value. An example is presented to demonstrate the proposed model. A comparison made with previous methods shows that the proposed model minimizes the total cost of manufacturing activities and quality-related issues in machining process planning, particularly in the early stages. Moreover, the applications are not be limited to machining process planning but can also be used in other forms of production planning. 相似文献
10.
A Cascading Auction Protocol as a Framework for Integrating Process Planning and Heterarchical Shop Floor Control 总被引:1,自引:0,他引:1
Patrick McDonnell Glen Smith Sanjay Joshi Soundar R.T. Kumara 《International Journal of Flexible Manufacturing Systems》1999,11(1):37-62
A new contract net-style auction protocol is proposed as a framework for integrating process planning and shop floor control in heterarchical manufacturing systems. Process planning is partitioned into on-line and off-line activities; off-line process planning decisions are represented in a graph format and used as input for on-line process planning activities performed by machine controllers. Triggered by the opening round of an auction, the final on-line stages of process planning are dovetailed with the resource allocation process in the shop floor control system. The auction process allows final process planning decisions to be based on timely information, relying on the distribution of static process planning information rather than the distribution of a model of dynamic shop floor status and allowing a controller to identify all the primary and secondary resources and operations that must be provided for the incremental processing of a part. 相似文献
11.
面向飞机装配的工艺设计与管理系统研究与开发 总被引:5,自引:0,他引:5
工艺是连接产品设计与制造的桥梁,是实现产品信息集成与管理的关键。在分析飞机装配特点和工艺管理特点的基础上,提出了面向飞机装配工艺设计和工艺管理的实现策略,阐述面向飞机装配工艺设计与管理系统应具有的基本功能,并对MBOM的生成和管理做了详细的说明,在此基础上为某航空企业开发了一套面向飞机装配工艺设计和工艺管理的应用系统,并取得了较好的使用效果。 相似文献
12.
S. Yao X. Han Y. Yang Yiming Rong S. H. Huang D. W. Yen G. Zhang 《The International Journal of Advanced Manufacturing Technology》2007,32(1-2):194-204
This paper introduces a comprehensive system for the production planning of the mass customization of non-rotational parts.
Combined features are defined based on the concept of part families. The process parameters are associated with the feature
parameters so that rapid production planning can be achieved for product design changes. Setup planning is carried out based
on both the best practice knowledge in industry and the algorithmic generation of setups. Manufacturing resource, fixture
design, and tolerance issues are considered in the production planning. The system also estimates cycle times and generates
standard documentation. 相似文献
13.
Yau-Ren Shiau Meng-Hung Lin Wen-Chieh Chuang 《The International Journal of Advanced Manufacturing Technology》2007,33(7-8):746-755
Producing products with multiple quality characteristics is always one of the concerns for an advanced manufacturing system.
To assure product quality, finite manufacturing resources (i.e., process workstations and inspection stations) could be available
and employed. The manufacturing resource allocation problem then occurs, therefore, process planning and inspection planning
should be performed. Both of these are traditionally regarded as individual tasks and conducted separately. Actually, these
two tasks are related. Greater performance of an advanced manufacturing system can be achieved if process planning and inspection
planning can be performed concurrently to manage the limited manufacturing resources. Since the product variety in batch production
or job-shop production will be increased for satisfying the changing requirements of various customers, the specified tolerance
of each quality characteristic will vary from time to time. Except for finite manufacturing resource constraints, the manufacturing
capability, inspection capability, and tolerance specified by customer requirement are also considered for a customized manufacturing
system in this research. Then, the unit cost model is constructed to represent the overall performance of an advanced manufacturing
system by considering both internal and external costs. Process planning and inspection planning can then be concurrently
solved by practically reflecting the customer requirements. Since determining the optimal manufacturing resource allocation
plan seems to be impractical as the problem size becomes quite large, in this research, genetic algorithm is successfully
applied with the realistic unit cost embedded. The performance of genetic algorithm is measured in comparison with the enumeration
method that generates the optimal solution. The result shows that a near-optimal manufacturing resource allocation plan can
be determined efficiently for meeting the changing requirement of customers as the problem size becomes quite large. 相似文献
14.
15.
Hong T. Young D. H. Tsai 《The International Journal of Advanced Manufacturing Technology》1994,9(5):305-310
A framework of a knowledge-based expert operation planning system, TURNPLAN, is described. The system incorporates a feature-based part representation scheme to smooth the essential information flow from design intent to manufacturing practice. Its main functions initially consist of the determination of machining sequence, cutting parameters and cutting tools. To make this system a complete working module for full integration of CAD/CAM, its knowledge base has been further upgraded so that determination of work-holding methods, and generation of tool paths and the associated NC part programs, are included in the system. This integrated system is developed on a PC-based computer using PROLOG, which is found suitable in a batch-type job shop environment for industrial applications. A practical example is included to highlight certain features of the system and the paper concludes with implications for further research. 相似文献
16.
Saleh M. Amaitik S. Engin Kiliç 《The International Journal of Advanced Manufacturing Technology》2007,31(9-10):978-993
This paper presents an intelligent process planning system using STEP features (ST-FeatCAPP) for prismatic parts. The system maps a STEP AP224 XML data file, without using a complex feature recognition process, and produces the corresponding machining operations to generate the process plan and corresponding STEP-NC in XML format. It carries out several stages of process planning such as operations selection, tool selection, machining parameters determination, machine tools selection and setup planning. A hybrid approach of most recent techniques (neural networks, fuzzy logic and rule-based) of artificial intelligence is used as the inference engine of the developed system. An object-oriented approach is used in the definition and implementation of the system. An example part is tested and the corresponding process plan is presented to demonstrate and verify the proposed CAPP system. The paper thus suggests a new feature-based intelligent CAPP system for avoiding complex feature recognition and knowledge acquisition problems. 相似文献
17.
KBE-based stamping process paths generated for automobile panels 总被引:1,自引:2,他引:1
Jinqiao Zheng Yilin Wang Zhigang Li 《The International Journal of Advanced Manufacturing Technology》2007,31(7-8):663-672
As automobile body panels are one kind of sheet metal part with groups of free form surfaces, the process planning is more
complicated than common sheet metal stamping to implode effectively and practically. Based on KBE, new frameworks have been
presented as intelligent master model at the system level and as procedure model at the activity level. In accordance with
these frameworks, an intelligent CAPP system has been specifically developed. Based on feature technology, features have been
extracted and represented by the object-oriented method. Stamping features and their parameters have been defined and extracted
based on feature technology and stamping process rules. The whole product knowledge has been represented by frames which directly
map to objects (or features) in the object-oriented sense. Relevant appropriate operations features have been assigned to
stamping features of a product based on feature-operation criteria, parameters of the stamping feature and their correlativity.
This assignment is a decision-making activity using a set of rules with a decision-making tree and model-based reasoning methods.
With knowledge between operations, such as operations order constraint (do-after) and operations combination constraint, process
paths have been improved based on relevant intelligent reasoning methods. Based on the relationships (preferred-to) between
processes and machines/dies, the structure of die and machine for each process can be identified, since the process route
has been determined. In this stamping process planning, the procedure and information have been controlled by a process control
structure that is associative and integrated. 相似文献
18.
Efficiency Measures of Process Plans for Machined Parts 总被引:1,自引:2,他引:1
G.A. Britton G. Thimm S.C. Fork F. Jiang 《The International Journal of Advanced Manufacturing Technology》2001,17(11):819-824
This paper presents an overview of the authors’ rooted tree technique for process planning. The overview provides the foundation
for the main part of the paper, which explains how the rooted tree can be used to develop efficiency measures of process plans.
The efficiency measures are determined by comparing an actual tree and its subgraphs with an "ideal" tree. The "ideal tree"
is one that minimises the number of manufacturing operations. The paper proves that the "ideal tree" is a directed design
dimension graph plus one operation. Three measures of efficiency are presented: finishing efficiency, preforming efficiency,
and overall efficiency. The practical value of the efficiency measures is demonstrated by presenting measures of plans for
four industrial parts. It is also argued that the efficiency measures provide a quantitative assessment of process plans that
can be used to improve them and manufacturing technology. 相似文献
19.
Meifa Huang Yanru Zhong 《The International Journal of Advanced Manufacturing Technology》2008,35(7-8):723-735
In conventional design, tolerancing is divided into two separated sequential stages, i.e., product tolerancing and process
tolerancing. In product tolerancing stage, the assembly functional tolerances are allocated to BP component tolerances. In
the process tolerancing stage, the obtained BP tolerances are further allocated to the process tolerances in terms of the
given process planning. As a result, tolerance design often results in conflict and redesign. An optimal design methodology
for both dimensional and geometrical tolerances (DGTs) is presented and validated in a concurrent design environment. We directly
allocate the required functional assembly DGTs to the pertinent process DGTs by using the given process planning of the related
components. Geometrical tolerances are treated as the equivalent bilateral dimensional tolerances or the additional tolerance
constraints according to their functional roles and engineering semantics in manufacturing. When the process sequences of
the related components have been determined in the assembly structure design stage, we formulate the concurrent tolerance
chains to express the relations between the assembly DGTs and the related component process DGTs by using the integrated tolerance
charts. Concurrent tolerancing which simultaneously optimizes the process tolerance based on the constraints of concurrent
DGTs and the process accuracy is implemented by a linear programming approach. In the optimization model the objective is
to maximize the total weight process DGTs while weight factor is used to evaluate the different manufacturing costs between
different means of manufacturing operations corresponding to the same tolerance value. Economical tolerance bounds of related
operations are given as constraints. Finally, an example is included to demonstrate the proposed methodology. 相似文献
20.
Integrated assembly and machining planning for electronic products using a genetic algorithm approach 总被引:1,自引:1,他引:0
Yuan-Jye Tseng Chi-Hung Lin Yu-Hua Lin 《The International Journal of Advanced Manufacturing Technology》2008,36(1-2):140-155
To produce an electronic product, both assembly operations and machining operations are required in the process plan. In most
cases, the assembly operations and machining operations need to be combined in a continued order with an integrated sequence.
This is different from the traditional process planning approaches in which machining operations and assembly operations are
separated as two independent tasks with no interactions. For an electronic product, the two types of operations and the associated
costs may affect each other in an interactive way. Therefore, the sequence planning of assembly operations and machining operations
must be analyzed with an integrated model. In this research, a graph-based model is presented to represent the assembly and
machining operations in an integrated model. The related operation cost functions are developed to evaluate the costs for
the integrated assembly and machining sequences. The integrated sequence planning problem is solved using a genetic algorithm
approach with an objective of lowest operation costs. As a result, the assembly operations and machining operations can be
planned in an integrated sequence suitable for producing electronic products. The result shows that the developed method using
the genetic algorithm approach is efficient for solving the integrated sequence planning problem. Example products are demonstrated
and discussed. 相似文献