Schwingfeste Auslegung von Schweiß‐ verbindungen aus der Magnesiumknetlegierung AZ31(ISO‐MgAl3Zn1) mit dem Konzept der fiktiven Ersatzradien von rf = 1,0 mm und 0,05 mm

Fatigue design of welded joints from the wrought magnesium alloy AZ31 (ISO‐MgAl3Zn1) by the local stress concept with the fictitious notch radius of r_f = 1.0 mm and 0.05 mm The investigations were carried out with three different types of MIG‐ and TIG‐welded magnesium joints of the alloy AZ31. The evaluation of the results showed that the local stress concept using the fictitious notch radius of r_f = 1.0 mm can be applied to magnesium welded joints from plates with thicknesses t ≥ 5 mm independently of the weld geometries (fully or partially penetrated butt welds, transversal stiffeners). Design curves are proposed for different stress ratios, i.e. R = ‐1 as well as 0 and 0.5, which allow the consideration of residual stresses as well as load induced mean stresses. The results permit also the suggestion of Δσ = 28 MPa as FAT‐value for the IIW‐Fatigue Design Recommendations. Further, the FAT‐value Δσ = 73 MPa for the fictitious radius of r_f = 0.05 mm to be applied to welded thin magnesium joints is derived, too. These FAT‐values are compared with already known data for steel and aluminium joints. A linear relationship between the FAT‐values and the Young’s modulus is determined.