Phthalates in indoor dust in Kuwait: implications for non‐dietary human exposure

Phthalates are semivolatile organic compounds with a ubiquitous environmental distribution. Their presence in indoor environments is linked to their use in a variety of consumer products such as children's toys, cosmetics, food packaging, flexible PVC flooring among others. The goal of this study was to investigate the occurrence and concentration of phthalates in dust from homes in Kuwait and to assess non‐dietary human exposure to these phthalates. Dust samples were randomly collected from 21 homes and analyzed for eight phthalates. The concentrations of total phthalates were log normally distributed and ranged from 470 to 7800 μg/g. Five phthalates [Di(2‐ethylhexyl) phthalate (DEHP), Di‐n‐octyl phthalate (DnOP), Di‐n‐butyl phthalate (DBP), Benzyl butyl phthalate (BzBP), and Dicyclohexyl phthalate (DcHP)] were routinely detected. The major phthalate compound was DEHP at a geometric mean concentration of 1704 μg/g (median, 2256 μg/g) accounting for 92% of the total phthalates measured. Using the measured concentrations and estimates of dust ingestion rates for children and adults, estimated human non‐dietary exposure based on median phthalate concentrations ranged from 938 ng/kg‐bd/day for adults to 13362 ng/kg‐bd/day for toddlers. The difference in exposure estimates between children and adults in this study supports previous reports that children are at greater risk from pollutants that accumulate indoors.     

A general mechanistic model for predicting the fate and transport of phthalates in indoor environments

A mechanistic model that considers particle dynamics and their effects on surface emissions and sorptions was developed to predict the fate and transport of phthalates in indoor environments. A controlled case study was conducted in a test house to evaluate the model. The model‐predicted evolving concentrations of benzyl butyl phthalate in indoor air and settled dust and on interior surfaces are in good agreement with measurements. Sensitivity analysis was performed to quantify the effects of parameter uncertainties on model predictions. The model was then applied to a typical residential environment to investigate the fate of di‐2‐ethylhexyl phthalate (DEHP) and the factors that affect its transport. The predicted steady‐state DEHP concentrations were 0.14 μg/m³ in indoor air and ranged from 80 to 46 000 μg/g in settled dust on various surfaces, which are generally consistent with the measurements of previous studies in homes in different countries. An increase in the mass concentration of indoor particles may significantly enhance DEHP emission and its concentrations in air and on surfaces, whereas increasing ventilation has only a limited effect in reducing DEHP in indoor air. The influence of cleaning activities on reducing DEHP concentration in indoor air and on interior surfaces was quantified, and the results showed that DEHP exposure can be reduced by frequent and effective cleaning activities and the removal of existing sources, though it may take a relatively long period of time for the levels to drop significantly. Finally, the model was adjusted to identify the relative contributions of gaseous sorption and particulate‐bound deposition to the overall uptake of semi‐volatile organic compounds (SVOCs) by indoor surfaces as functions of time and the octanol‐air partition coefficient (K_oa) of the chemical. Overall, the model clarifies the mechanisms that govern the emission of phthalates and the subsequent interactions among air, suspended particles, settled dust, and interior surfaces. This model can be easily extended to incorporate additional indoor source materials/products, sorption surfaces, particle sources, and room spaces. It can also be modified to predict the fate and transport of other SVOCs, such as phthalate‐alternative plasticizers, flame retardants, and biocides, and serves to improve our understanding of human exposure to SVOCs in indoor environments.     

Determining source strength of semivolatile organic compounds using measured concentrations in indoor dust

Consumer products and building materials emit a number of semivolatile organic compounds (SVOCs) in the indoor environment. Because indoor SVOCs accumulate in dust, we explore the use of dust to determine source strength and report here on analysis of dust samples collected in 30 US homes for six phthalates, four personal care product ingredients, and five flame retardants. We then use a fugacity‐based indoor mass balance model to estimate the whole‐house emission rates of SVOCs that would account for the measured dust concentrations. Di‐2‐ethylhexyl phthalate (DEHP) and di‐iso‐nonyl phthalate (DiNP) were the most abundant compounds in these dust samples. On the other hand, the estimated emission rate of diethyl phthalate is the largest among phthalates, although its dust concentration is over two orders of magnitude smaller than DEHP and DiNP. The magnitude of the estimated emission rate that corresponds to the measured dust concentration is found to be inversely correlated with the vapor pressure of the compound, indicating that dust concentrations alone cannot be used to determine which compounds have the greatest emission rates. The combined dust‐assay modeling approach shows promise for estimating indoor emission rates for SVOCs.     

Semivolatile organic compounds in French schools: Partitioning between the gas phase,airborne particles and settled dust

The indoor environmental quality in classrooms can largely affect children's daily exposure to indoor chemicals in schools. To date, there has not been a comprehensive study of the concentrations of semivolatile organic compounds (SVOCs) in French schools. Therefore, the French Observatory for Indoor Air Quality (OQAI) performed a field study of SVOCs in 308 nurseries and elementary schools between June 2013 and June 2017. The concentrations of 52 SVOCs, including phthalates, polybrominated diphenyl ethers (PBDEs), polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), synthetic musks, and pesticides, were measured in air and settled dust (40 SVOCs in both air and dust, 12 in either air or dust). The results showed that phthalates had the highest concentrations among the SVOCs in both the air and dust. Other SVOCs, including tributyl phosphate, fluorene, phenanthrene, gamma-hexachlorocyclohexane (gamma-HCH, lindane), galaxolide, and tonalide, also showed high concentrations in both the air and dust. Theoretical equations were developed to estimate the SVOC partitioning between the air and settled dust from either the octanol/air partition coefficient or the boiling point of the SVOCs. The regression constants of the equations were determined using the data set of the present study for phthalates and PAHs.     

Phthalate metabolites in urine samples from Beijing children and correlations with phthalate levels in their handwipes

Little attention has been paid to dermal absorption of phthalates even though modeling suggests that this pathway may contribute meaningfully to total uptake. We have concurrently collected handwipe and urine samples from 39 Beijing children (5–9 years) for the purpose of measuring levels of five phthalates in handwipes, corresponding concentrations of eight of their metabolites in urine, and to subsequently assess the contribution of dermal absorption to total uptake. In summer sampling, DEHP was the most abundant phthalate in handwipes (median: 1130 μg/m²), while MnBP was the most abundant metabolite in urine (median: 232 ng/ml). We found significant associations between the parent phthalate in handwipes and its monoester metabolite in urine for DiBP (r = 0.41, P = 0.01), DnBP (r = 0.50, P = 0.002), BBzP (r = 0.48, P = 0.003), and DEHP (r = 0.36, P = 0.03). Assuming that no dermal uptake occurred under clothing‐covered skin, we estimate that dermal absorption of DiBP, DnBP, BBzP, and DEHP contributed 6.9%, 4.6%, 6.9%, and 3.3%, respectively, to total uptake. Assuming that somewhat attenuated dermal uptake occurred under clothing‐covered skin, these estimates increase to 19%, 14%, 17%, and 10%. The results indicate that absorption from skin surfaces makes a meaningful contribution to total phthalate uptake for children and should be considered in future risk assessments.     

Temporal variability of indoor dust concentrations of semivolatile organic compounds

The determinants of the temporal variability of indoor dust concentrations of semivolatile organic compounds (SVOCs) remain mostly unexplored. We examined temporal variability of dust concentrations and factors affecting dust concentrations for a wide range of SVOCs. We collected dust samples three times from 29 California homes during a period of 22 months and quantified concentrations of 47 SVOCs in 87 dust samples. We computed intraclass correlation coefficients (ICCs) using three samples collected within the same house. We calculated correlation coefficients (r) between two seasons with similar climate (spring and fall) and between two seasons with opposite climate (summer and winter). Among 26 compounds that were detected in more than 50% of the samples at all three visits, 20 compounds had ICCs above 0.50 and 6 compounds had ICCs below 0.50. For 19 out of 26 compounds, correlation coefficients between spring and fall (r = 0.48-0.98) were higher than those between summer and winter (r = 0.09-0.92), implying seasonal effects on dust concentrations. Our study showed that within-home temporal variability of dust concentrations was small (ICC > 0.50) for most SVOCs, but dust concentrations may vary over time for some SVOCs with seasonal variations in source rates, such as product use.     

Analysis of selected phthalates in Canadian indoor dust collected using household vacuum and standardized sampling techniques

Phthalates have been used extensively as plasticizers to improve the flexibility of polymers, and they also have found many industrial applications. They are ubiquitous in the environment and have been detected in a variety of environmental and biological matrices. The goal of this study was to develop a method for the determination of 17 phthalate esters in house dust. This method involved sonication extraction, sample cleanup using solid phase extraction, and isotope dilution GC/MS/MS analysis. Method detection limits (MDLs) and recoveries ranged from 0.04 to 2.93 μg/g and from 84 to 117%, respectively. The method was applied to the analysis of phthalates in 38 paired household vacuum samples (HD) and fresh dust (FD) samples. HD and FD samples compared well for the majority of phthalates detected in house dust. Data obtained from 126 household dust samples confirmed the historical widespread use of bis(2‐ethylhexyl) phthalate (DEHP), with a concentration range of 36 μg/g to 3840 μg/g. Dibutyl phthalate (DBP), benzyl butyl phthalate (BzBP), diisononyl phthalate (DINP), and diisodecyl phthalate (DIDP) were also found in most samples at relatively high concentrations. Another important phthalate, diisobutyl phthalate (DIBP), was detected at a frequency of 98.4% with concentrations ranging from below its MDL of 0.51 μg/g to 69 μg/g.     

Beyond phthalates: Gas phase concentrations and modeled gas/particle distribution of modern plasticizers

The ongoing health debate about polymer plasticizers based on the esters of phthalic acid, especially di(2-ethylhexyl) phthalate (DEHP), has caused a trend towards using phthalates of lower volatility such as diisononyl phthalate (DINP) and towards other acid esters, such as adipates, terephthalates, citrates, etc. Probably the most important of these so-called “alternative” plasticizers is diisononyl cyclohexane-1,2-dicarboxylate (DINCH). In the indoor environment, the continuously growing market share of this compound since its launch in 2002 is inter alia apparent from the increasing concentration of DINCH in settled house dust. From the epidemiological point of view there is considerable interest in identifying how semi-volatile organic compounds (SVOCs) distribute in the indoor environment, especially in air, airborne particles and sedimented house dust. This, however, requires reliable experimental concentration data for the different media and good measurements or estimates of their physical and chemical properties. This paper reports on air concentrations for DINP, DINCH, diisobutyl phthalate (DIBP), diisobutyl adipate (DIBA), diisobutyl succinate (DIBS) and diisobutyl glutarate (DIBG) from emission studies in the Field and Laboratory Emission Cell (FLEC). For DINP and DINCH it took about 50 days to reach the steady-state value: for four months no decay in the concentration could be observed. Moreover, vapor pressures p₀ and octanol-air partitioning coefficients K_OA were obtained for 37 phthalate and non-phthalate plasticizers from two different algorithms: EPI Suite and SPARC. It is shown that calculated gas/particle partition coefficients K_p and fractions can widely differ due to the uncertainty in the predicted p₀ and K_OA values. For most of the investigated compounds reliable experimental vapor pressures are not available. Rough estimates can be obtained from the measured emission rate of the pure compound in a microchamber as is shown for di-n-butyl phthalate (DnBP), di(2-ethylhexyl) adipate(DEHA), tri(octyl) trimellitate (TOTM) and DEHP.     

Indoor phthalate exposure and contributions to total intake among pregnant women in the SELMA study

Phthalates are widely used in consumer products. Exposure to phthalates can lead to adverse health effects in humans, with early-life exposure being of particular concern. Phthalate exposure occurs mainly through ingestion, inhalation, and dermal absorption. However, our understanding of the relative importance of different exposure routes is incomplete. This study estimated the intake of five phthalates from the residential indoor environment for 455 Swedish pregnant women in the SELMA study using phthalate mass fraction in indoor dust and compares these to total daily phthalate intakes back-calculated from phthalate metabolite concentrations in the women's urine. Steady-state models were used to estimate indoor air phthalate concentrations from dust measurements. Intakes from residential dust and air made meaningful contributions to total daily intakes of more volatile di-ethyl phthalate (DEP), di-n-butyl phthalate (DnBP), and di-iso-butyl phthalate (DiBP) (11% of total DEP intake and 28% of total DnBP and DiBP intake combined). Dermal absorption from air was the dominant pathway contributing to the indoor environmental exposure. Residential exposure to less volatile phthalates made minor contributions to total intake. These results suggest that reducing the presence of low molecular weight phthalates in the residential indoor environment can meaningfully reduce phthalate intake among pregnant women.     

Occurrence of phthalates and musk fragrances in indoor air and dust from apartments and kindergartens in Berlin (Germany)

In this study, the occurrence of persistent environmental contaminants room air samples from 59 apartments and 74 kindergartens in Berlin were tested in 2000 and 2001 for the presence of phthalates and musk fragrances (polycyclic musks in particular). These substances were also measured in household dust from 30 apartments. The aim of the study was to measure exposure levels in typical central borough apartments, kindergartens and estimate their effects on health. Of phthalates, dibutyl phthalate had the highest concentrations in room air, with median values of 1083 ng/m(3) in apartments and 1188 ng/m(3) in kindergartens. With around 80% of all values, the main phthalate in house dust was diethylhexyl phthalate, with median values of 703 mg/kg (range: 231-1763 mg/kg). No statistically significant correlation could be found between air and dust concentration. Musk compounds were detected in the indoor air of kindergartens with median values of 101 ng/m(3) [1,3,4,6,7,8-hexahydro-4,6,6,7,8,8- hexamethylcyclopenta-(g) 2-benzopyrane (HHCB)] and 44 ng/m(3) [7-acetyl-1,1,3,4,4,6-hexamethyl-tetraline (AHTN)] and maximum concentrations of up to 299 and 107 ng/m(3) respectively. In household dust HHCB and AHTN were detected in 63 and 83% of the samples with median values of 0.7 and 0.9 mg/kg (Maximum: 11.4 and 3.1 mg/kg) each. On comparing the above phthalate concentrations with presently acceptable tolerable daily intake values (TDI), we are talking about only a small average intake [di(2-ethylhexyl) phthalate and diethyl phthalate less than 1 and 8% of the TDI] by indoor air for children. The dominant intake path was the ingestion of foodstuffs. For certain subsets of the population, notably premature infants (through migration from soft polyvinyl chloride products), children and other patients undergoing medical treatment like dialysis, exchange transfusion, an important additional intake of phthalates must taken into account. PRACTICAL IMPLICATIONS: The phthalate and musk compounds load in a sample of apartments and kindergartens were low with a typical distribution pattern in air and household dust, but without a significant correlation between air and dust concentration. The largest source of general population exposure to phthalates is dietary. For certain subsets of the general population non-dietary ingestion (medical and occupational) is important.     

Semi‐volatile organic compounds in heating,ventilation, and air‐conditioning filter dust in retail stores

Retail stores contain a wide range of products that can emit a variety of indoor pollutants. Among these chemicals, phthalate esters and polybrominated diphenyl ethers (PBDEs) are two important categories of semi‐volatile organic compounds (SVOCs). Filters in heating, ventilation, and air‐conditioning (HVAC) system collect particles from large volumes of air and thus potentially provide spatially and temporally integrated SVOC concentrations. This study measured six phthalate and 14 PBDE compounds in HVAC filter dust in 14 retail stores in Texas and Pennsylvania, United States. Phthalates and PBDEs were widely found in the HVAC filter dust in retail environment, indicating that they are ubiquitous indoor pollutants. The potential co‐occurrence of phthalates and PBDEs was not strong, suggesting that their indoor sources are diverse. The levels of phthalates and PBDEs measured in HVAC filter dust are comparable to concentrations found in previous investigations of settled dust in residential buildings. Significant correlations between indoor air and filter dust concentrations were found for diethyl phthalate, di‐n‐butyl phthalate, and benzyl butyl phthalate. Reasonable agreement between measurements and an equilibrium model to describe SVOC partitioning between dust and gas‐phase is achieved.     

Organophosphate and phthalate esters in settled dust from apartment buildings in Stockholm

In this study, the occurrence of nine phthalate diesters (phthalates) and 14 organophosphorus flame retardants (PFRs) was investigated in 62 house dust samples collected from 19 buildings in Stockholm area during the year 2008. Eight phthalates were detected in almost all samples, with median concentrations ranging from 0.47 μg/g to 449 μg/g with di(2‐ethylhexyl) phthalate being the most abundant compound. Twelve PFRs were detected with median concentrations ranging from 0.19 μg/g to 11 μg/g. Within this class of compounds, the most abundant were tris(2‐chloroisopropyl) and tris(2‐butoxyethyl) phosphate. Both classes of compounds were also measured in the air of the apartments, but no correlation between air and dust concentrations could be found. Based on these measurements, exposure, via house dust ingestion and air inhalation, was calculated for adults and toddlers, and compared to published limit values in order to estimate potential health risks. In an extreme exposure scenario for toddlers, di(2‐ethylhexyl) phthalate, tris(2‐chloroethyl) phosphate, tris(2‐butoxyethyl) phosphate, and tributyl phosphate were close to the reference dose for chronic oral exposure or the tolerable daily intake. Standard Reference Material SRM 2585 was used as a quality control sample, and the levels of diisononyl and diisodecyl phthalates were determined in this material.     

Effect of particle concentration and semi-volatile organic compounds on the phenomenon of ‘black magic dust’ in dwellings

The spontaneous discoloration of indoor surfaces which occurs especially during the heating period has been intensively investigated in Germany since the beginning of the 1990s. On the basis of earlier studies and a questionnaire this phenomenon, referred to as ‘black dwellings’ or ‘black magic dust’ (BMD), was attributed to the presence of semi-volatile organic compounds (SVOCs) and their interaction with dust and particles. In a project funded by the German Federal Environment Agency an attempt was made to deliberately simulate this effect in suitable test chambers. To do so wall paints were used which had been doped with the plasticizers DEHP and DBP. They were applied in different quantities to appropriate wall surfaces in four room size stainless-steel chambers. In this way realistic air concentrations of these two compounds were obtained. An artificially arranged thermal bridge located above a radiator was intended to accelerate deposition of the black dust. Even when the particle concentration in the chamber was briefly increased, no discoloration could be detected. It therefore appears that a combination of dust, thermal bridges and elevated concentrations of plasticizer does not necessarily trigger the BMD phenomenon. With the aid of investigations into affected dwellings it was possible to identify different mechanisms. Strong sources of particles were identified in some apartments while in others the particle deposits were caused by convective air flows. On the basis of all results it can be concluded that the deposition of particles by thermophoresis, diffusiophoresis or sedimentation is responsible for the phenomenon.     

Pentachlorophenol in indoor environments. Correlation of PCP concentrations in air and settled dust from floors

The investigation of settled dust is a proven and simple screening-method for considering indoor contamination for semivolatile compounds. Here we investigate the correlation of PCP concentrations in air and freshly settled dust from floors. Air and dust samples were taken from 75 rooms in 30 buildings with suspicion of an application of PCP-containing wood preservatives. Sampling was repeated four times within 18 months. PCP air concentrations were found in the range of <0.3-576 ng m-3 (mean value 25.3 ng m-3, median 2.5 ng m-3). PCP dust concentrations were found in the range of 0.083-79 microg g-1 (mean value 3.5 microg g-1, median 1.1 microg g-1. A weak highly significant correlation (P < 0.0001) with a correlation coefficient of R2 = 0.433, of the PCP concentration in dust with the PCP concentration in air, was observed. Measurement of PCP concentrations in dust, therefore, is a suitable screening method for the evaluation of indoor contamination with PCP. Due to the high dispersion of the data it is not possible to calculate PCP concentrations in air from concentrations in dust although a highly significant correlation of the PCP concentrations in air and dust was found.     

Emissions of VOCs,SVOCs, and mold during the construction process: Contribution to indoor air quality and future occupants’ exposure

Building materials and human activities are important sources of contamination indoors, but little information is available regarding contamination during construction process which could persist during the whole life of buildings. In this study, six construction stages on two construction sites were investigated regarding the emissions of 43 volatile organic compounds (VOCs), 46 semi-volatile organic compounds (SVOCs), and the presence of 4 genera of mold. Results show that the future indoor air quality does not only depend on the emissions of each building product but that it is also closely related to the whole implementation process. Mold spore measurements can reach 1400 CFU/m³, which is particularly high compared with the concentrations usually measured in indoor environments. Relatively low concentrations of VOCs were observed, in relation to the use of low emissive materials. Among SVOCs analyzed, some phthalates, permethrin, and hydrocarbons were found in significant concentrations upon the delivery of building as well as triclosan, suspected to be endocrine disruptor, and yet prohibited in the treatment of materials and construction since 2014. As some regulations exist for VOC emissions, it is necessary to implement them for SVOCs due to their toxicity.     

Atmospheric fate of phthalate esters in an urban area (Paris-France)

The atmospheric fate of six phthalate esters was investigated in the urban area of Paris (France). Total atmospheric levels (ng m-3) were as follows: DMP, 0.5; DEP, 10.7; DnBP, 22.2; BBP, 4.6; DEHP, 18.9; and DnOP, 0.5 ng m-3, showing a predominance of DnBP and next, DEHP. They are mainly present in the vapour phase, from 93.8% to 64.9%, particularly for the esters with alkyl chain length of less than six C. An inverse correlation was found between the vapour phase concentrations and the molecular weight and also a direct correlation between the vapour phase concentrations and the log [vapour pressure] of the compounds. Seasonal variations were displayed by principal component analysis (PCA), due to significant correlation between phthalate concentrations and air temperature. Rain water concentrations (ng L-1) were as follows: DMP, 116; DEP, 333; DnBP, 592; BBP, 81; DEHP, 423; and DnOP, 10. PCA analysis showed a seasonal variation of these concentrations correlated to the air temperature. The experimental water/air scavenging ratio was calculated and was in accordance with the theoretical one obtained from the vapour pressure and the Henry's law constant for each phthalate ester. The global trend was a decrease of the washout coefficient in relation with the rise of alkyl chain length. Yearly balances for rainwater and bulk deposition allowed the estimation of dry deposits that represented about half of total. Our findings highlight the major part played by particles in atmospheric deposition processes.     

Degradation of phthalate esters in an activated sludge wastewater treatment plant

Efficient removal of phthalate esters (PE) in wastewater treatment plants (WWTP) is becoming an increasing priority in many countries. In this study, we examined the fate of dimethyl phthalate (DMP), dibutyl phthalate (DBP), butylbenzyl phthalate (BBP), and di-(2-ethylhexyl) phthalate (DEHP) in a full scale activated sludge WWTP with biological removal of nitrogen and phosphorus. The mean concentrations of DMP, DBP, BBP, and DEHP at the WWTP inlet were 1.9, 20.5, 37.9, and 71.9 μg/L, respectively. Less than 0.1%, 42%, 35%, and 96% of DMP, DBP, BBP, and DEHP was associated with suspended solids, respectively. The overall microbial degradation of DMP, DBP, BBP, and DEHP in the WWTP was estimated to be 93%, 91%, 90%, and 81%, respectively. Seven to nine percent of the incoming PE were recovered in the WWTP effluent. Factors affecting microbial degradation of DEHP in activated sludge were studied using [U-¹⁴C-ring] DEHP as tracer. First order rate coefficients for aerobic DEHP degradation were 1.0×10⁻², 1.4×10⁻², and 1.3×10⁻³ at 20, 32, and 43 °C, respectively. Aerobic degradation rates decreased dramatically under aerobic thermophilic conditions (<0.1×10⁻² h⁻¹ at 60 °C). The degradation rate under anoxic denitrifying conditions was 0.3×10⁻² h⁻¹, whereas the rate under alternating conditions (aerobic-anoxic) was 0.8×10⁻² h⁻¹. Aerobic DEHP degradation in activated sludge samples was stimulated 5-9 times by addition of a phthalate degrading bacterium. The phthalate degrading bacterium was isolated from activated sludge, and maintained a capacity for DEHP degradation while growing on vegetable oil. Collectively, the results of the study identified several controls of microbial PE degradation in activated sludge. These controls may be considered to enhance PE degradation in activated sludge WWTP with biological removal of nitrogen and phosphorus.     

Measured concentrations of consumer product chemicals in California house dust: Implications for sources,exposure, and toxicity potential

Household dust is a reservoir of various consumer product chemicals. Thus, characterizing comprehensive chemical profiles of house dust may help improve our understanding of residential chemical exposure. We have previously developed a method for detecting a broad spectrum of chemicals in dust by applying a combination of target, suspect screening, and non-target methods with mass spectrometry preceded by liquid chromatography and gas chromatography. Building upon a previous study that detected 271 compounds in 38 dust samples, we presented concentrations of 144 compounds that were confirmed and quantified by standards in the same set of samples. Ten compounds were measured with median concentrations greater than 10 000 ng/g of dust: cis-hexadec-6-enoic acid, squalene, cholesterol, vitamin E, bis(2-ethylhexyl) phthalate, dioctyl terephthalate, linoleic acid, tricaprylin, tris(1-chloroisopropyl) phosphate, and oxybenzone. We also reviewed in vitro toxicity screening data to identify compounds that were not previously detected in indoor dust but have potential for adverse health effects. Among 119 newly detected compounds, 13 had endocrine-disrupting potential and 7 had neurotoxic potential. Toxicity screening data were not available for eight biocides, which may adversely affect health. Our results strive to provide more comprehensive chemical profiles of house dust and identified information gaps for future health studies.     

Organophosphate and phthalate esters in air and settled dust - a multi-location indoor study

This paper reports the abundance in indoor air and dust of eleven organophosphate esters and six phthalate esters. Both groups of these semi-volatile compounds are widely incorporated as additives into plastic materials used in the indoor environment, thus contributing to indoor exposure to industrial chemicals. Thirty sampling sites representing three different indoor environments (private homes, day care centers, and workplaces) in the Stockholm area, Sweden, were selected to obtain representative concentration profiles in both ambient air and settled dust. Eight of the target organophosphate esters and all six phthalate esters were found in both air and dust samples at all locations. The phthalate esters were more abundant than the organophosphate esters, typically ten times higher total concentrations. Especially interesting were the high levels of tributoxyethyl phosphate in the day care centers, the relatively high levels of chlorinated organophosphate esters in the air of workplaces and the overall high levels of diethylhexyl phthalate in dust. The air concentration profiles of the phosphate esters differed significantly between the three indoor environments, whereas the concentration profiles of the phthalate esters as well as their total concentrations were similar. The correlation between concentrations found in air and in dust was found to be weak. PRACTICAL IMPLICATIONS: Organophosphate esters and phthalate esters are commonly used as additives in numerous building materials and consumer products. The use of these compounds is increasing, and phosphate and phthalate esters are to be regarded as ubiquitous contaminants in the indoor environment. These compounds comprise a number of different compounds that have been associated with biologic effects in animal studies as well as in humans. Thus, it is of concern to increase the knowledge about human exposure of these compounds because of their presence in indoor air. In this paper, thirty indoor environments have been surveyed with respect to seventeen of the most abundant of these compounds.     

Phthalate removal throughout wastewater treatment plant: Case study of Marne Aval station (France)

The fate of six phthalates: dimethyl phthalate (DMP), diethyl phthalate (DEP), di-n-butyl phthalate (DnBP), butyl benzyl phthalate (BBP), bis (2-ethylhexyl) phthalate (DEHP) and di-n-octyl phthalate (DnOP) was investigated throughout wastewater treatment processes in the wastewater treatment plant (WWTP) of Marne Aval (France). That plant treats wastewater from a highly populated area and was used as a pilot station for development of nitrification processes.In wastewater, at each step of treatment, DEHP was always the major compound (9 to 44 µg L^− 1), followed by DEP (1.6 to 25 µg L^− 1). Other phthalates averaged 1 µg L^− 1 and DnOP remained close to the detection limit in nearly all cases.In sludge, the prevailing compound was also DEHP (72 µg g^− 1) which is consistent with its tendency to get sorbed upon suspended matter (SM). DnOP came in third, in relation with its resistance to biodegradation.For the studied period, the removal efficiency of DEHP from wastewater was about 78%. That removal seemed to proceed rather from particle settling than from biodegradation. A highly significant correlation (p < 0.001) was found between DEHP and SM concentrations throughout treatment processes. The other compounds: DMP, DEP, DnBP and BBP, displayed satisfactory efficiencies ranging from 68 to over 96% for the lighter ones obviously more easily degraded.Under rainy periods, the plant discharge impact upon Marne River quality in terms of phthalate fluxes, appeared to be minor as compared to the amount brought by the storm overflows in the same area. Downstream of the WWTP discharge, DEHP concentration remained under the European norm for surface water (NQE: 1.3 µg L^− 1).Our study documents the behaviour of phthalate esters throughout a WWTP which treatment device is used by 55% of the WWTP in the river Seine basin.