The glucanase-soluble mannoproteins limit cell wall porosity in Saccharomyces cerevisiae

The cell wall porosity of batch-grown Saccharomyces cerevisiae was maximal in the early exponential phase and fell off rapidly to lower levels in later growth phases. Treatment of stationary-phase cells with alpha-mannosidase restored wall porosity to the level of cells in early exponential phase. When cells in the early exponential phase were treated with alpha-mannosidase, or tunicamycin, an inhibitor of N-glycosylation, even higher porosities were obtained. Mutants with truncated mannan side-chains in their wall proteins also had very porous walls. The importance of the mannan side-chains for wall porosity was also seen during sexual induction. Treatment with alpha pheromone, which leads to the formation of wall proteins with shorter mannan side-chains, enhanced wall porosity. Disulphide bridges also affect cell wall porosity. They were predominantly found in the glucanase-soluble wall proteins. Because the main part of the mannan side-chains is also found in this family of wall proteins, our results demonstrate that the glucanase-soluble mannoproteins limit cell wall porosity in yeast.     

Polyamines and cell wall organization in Saccharomyces cerevisiae.

Cells of Saccharomyces cerevisiae 179-5, an ornithine decarboxylase mutant (spe-1), showed several ultrastructural abnormalities when cultivated in the absence of polyamines. Besides the appearance of microvacuole-like spaces in the cytoplasm and of deformed nuclei, the most important alterations seemed to be located in the cell wall, which was thicker and of heterogeneous texture, and in the cell membrane, of irregular contour. These modifications could not be evoked by general stress conditions elicited by lack of nutrients. The relative levels of cell wall polysaccharides were altered in polyamine-deprived organisms, giving an envelope with increased mannan and decreased glucan content; this cell wall was incompletely attacked by the lytic enzyme zymolyase. Polyamine depletion led also to some abnormalities in the budding pattern. The above observations suggest the involvement of polyamines in the correct structure and organization of the yeast cell.     

Importance of cell wall mannoproteins for septum formation in Saccharomyces cerevisiae

The mannosyltransferase mutants mnn9 and mnn10 were isolated in a genetic screen for septation defects in Saccharomyces cerevisiae. Ultrastructural examination of mutant cell walls revealed markedly thin septal structures and occasional failure to construct trilaminar septa, which then led to the formation of bulky default septa at the bud neck. In the absence of a functional septation apparatus, mnn10 mutants are unable to complete cytokinesis and die as cell chains with incompletely separated cytoplasms, indicating that mannosylation defects impair the ability to form remedial septa. We could not detect N-linked glycosylation of the beta(1,3)glucan synthase Fks1p and mnn10 defects do not change the molecular weight or abundance of the protein. We discuss a model explaining the pleiotropic effects of impaired N-linked protein glycosylation on septation in S. cerevisiae.     

热激处理减轻黄瓜冷害与细胞壁代谢的关系

为了进一步阐明热激处理缓解黄瓜冷害症状的作用机理,研究热激处理对采后黄瓜果实冷害指数、细胞壁组分以及细胞壁降解酶活性的影响,将\     

Mutations in Fks1p affect the cell wall content of beta-1,3- and beta-1,6-glucan in Saccharomyces cerevisiae

Fks1p and Fks2p are related proteins thought to be catalytic subunits of the beta-1,3-glucan synthase. Analysis of fks1 delta mutants showed a partial K1 killer toxin-resistant phenotype and a 30% reduction in alkali-soluble beta-1,3-glucan that was accompanied by a modest reduction in beta-1,6-glucan. The gas1 delta mutant lacking a 1,3-beta-glucanosyltransferase displayed a similar reduction in alkali-soluble beta-1,3-glucan but did not share the beta-1,6-glucan defect, indicating that beta-1,6-glucan reduction is not a general phenotype among beta-1,3-glucan biosynthetic mutants. Overexpression of FKS2 suppressed the killer toxin phenotype of fks1 delta mutants, implicating Fks2p in the biosynthesis of the residual beta-1,6-glucan present in fks1 delta cells. In addition, eight out of 12 fks1ts fks2 delta mutants had altered beta-glucan levels at the permissive temperature: the partial killer resistant FKS1F1258Y N1520D allele was severely affected in both polymers and displayed a 55% reduction in beta-1,6-glucan, while the in vitro hyperactive allele FKS1T605I M761T increased both beta-glucan levels. These beta-1,6-glucan phenotypes may be due to altered availability of, and structural changes in, the beta-1,3-glucan polymer, which might serve as a beta-1,6-glucan acceptor at the cell surface. Alternatively, Fks1p and Fks2p could actively participate in the biosynthesis of both polymers as beta-glucan transporters. We analysed Fks1p and Fks2p in beta-1,6-glucan deficient mutants and found that they were mislocalized and that the mutants had reduced in vitro glucan synthase activity, possibly contributing to the observed beta-1,6-glucan defects.     

Saccharomyces cerevisiae Big1p,a putative endoplasmic reticulum membrane protein required for normal levels of cell wall beta-1,6-glucan

Deletion of Saccharomyces cerevisiae BIG1 causes an approximately 95% reduction in cell wall beta-1,6-glucan, an essential polymer involved in the cell wall attachment of many surface mannoproteins. The big1 deletion mutant grows very slowly, but growth can be enhanced if cells are given osmotic support. We have begun a cell biological and genetic analysis of its product. We demonstrate, using a Big1p-GFP fusion construct, that Big1p is an N-glycosylated integral membrane protein with a Type I topology that is located in the endoplasmic reticulum (ER). Some phenotypes of a big1Delta mutant resemble those of strains disrupted for KRE5, which encodes another ER protein affecting beta-l,6-glucan levels to a similar extent. In a big1Deltakre5Delta double mutant, both the growth and alkali-soluble beta-l,6-glucan levels were reduced as compared to either single mutant. Thus, while Big1p and Kre5p may have similar effects on beta-l,6-glucan synthesis, these effects are at least partially distinct. Residual beta-l,6-glucan levels in the big1Deltakre5Delta double mutant indicate that these gene products are unlikely to be beta-l,6-glucan synthase subunits, but rather may play some ancillary roles in beta-l,6-glucan synthase assembly or function, or in modifying proteins for attachment of beta-l,6-glucan.     

Endocytosis and vacuolar morphology in Saccharomyces cerevisiae are altered in response to ethanol stress or heat shock

The vital lipophilic dye N‐(3‐triethylammoniumpropyl)‐4‐[6‐(4‐(diethylamino)phenyl]hexatrienyl) pyridinium dibromide (FM 4‐64) was used to study the effect of ethanol stress and heat shock on endocytosis in the yeast Saccharomyces cerevisiae. Yeast cells stained with FM 4‐64 were placed in a culture chamber and the internalization of the dye was monitored by fluorescence microscopy during perfusion of the cells with fresh growth medium. In the absence of ethanol in the perfusion medium, the internalization of FM 4‐64 from the plasma membrane to the vacuolar membrane by yeast cells harvested from the exponential phase of growth was completed in 30 min. The presence of 6% (v/v) ethanol in the perfusion medium had no obvious effect on the internalization of FM 4‐64 from the plasma membrane, but did lead to an accumulation of the dye in endocytic intermediates. Consequently, vacuolar membrane staining was delayed. Cells stained with FM 4‐64 and subjected to heat shock displayed a similar effect, with endocytic intermediates becoming more prominent with the severity of the heat shock. For both ethanol stress and heat shock, vacuolar morphology altered from segregated structures to a single, large organelle. The findings of this study reinforce previous observations that ethanol stress and heat shock induce similar responses in yeast. Copyright © 1999 John Wiley & Sons, Ltd.     

Glycogen--a covalently linked component of the cell wall in Saccharomyces cerevisiae.

Glycogen in Saccharomyces cerevisiae is present in two pools, one soluble and intracellular, the other present in the cell wall and rendered water-insoluble owing to its covalent linkage to cell wall beta-glucan. The insoluble glycogen fraction was solubilized using beta-1,3-glucanase. The alpha beta-glucan complex obtained showed intense red staining with iodine and was isolated from free beta-glucans by affinity chromatography using concanavalin A sepharose 4B. Further use of molecular sieving has confirmed that glycogen is linked to beta-glucan as the non-retained fraction on Biogel P2 split into two peaks on treatment with amyloglucosidase. Partial acid hydrolysis and subsequent paper chromatography of the alpha beta-glucan complex isolated revealed the presence of gentiobiose and other higher oligosaccharides, indicating that glycogen is linked to beta-1,3-glucan through a beta-1,6 branch. The insoluble glycogen can be extracted in a soluble form by acetic acid treatment and is known as acid-soluble glycogen. The presence of glycogen in the cell wall is confirmed by controlled enzymatic release of alpha beta-glucan complex using lyticase from Arthobacter luteus without disruption of the plasma membrane, as can be visualized using electron microscopy.     

Cyclic variations in the permeability of the cell wall of Saccharomyces cerevisiae.

To study cell-cycle-related variations in wall permeability of Saccharomyces cerevisiae, two approaches were used. First, an asynchronous culture was fractionated by centrifugal elutriation into subpopulations containing cells of increasing size. The subpopulations represented different stages of the cell cycle as judged by light microscopy. Cell wall porosity increased when these subpopulations became enriched with budded cells. Secondly, synchronous cultures were obtained by releasing MATa cells from alpha-factor induced G1-arrest. These cultures grew synchronously for at least two generations. The cell wall porosity increased sharply in these cultures, shortly before buds became visible and was maximal during the initial stages of bud growth. It decreased in cells which had completed nuclear migration and before abscission of the bud had occurred. The porosity reached its lowest value during abscission and in unbudded cells. We examined the incorporation of mannoproteins into the wall during the cell cycle. SDS-extractable mannoproteins were incorporated continuously. However, the incorporation of glucanase-extractable mannoproteins, which are known to affect cell wall porosity, showed cyclic oscillations and reached its maximum after nuclear migration. This coincided with a rapid decrease in cell wall porosity, indicating that glucanase-extractable mannoproteins might contribute to this decrease.     

An assay of relative cell wall porosity in Saccharomyces cerevisiae, Kluyveromyces lactis and Schizosaccharomyces pombe

We have developed a new assay to determine relative cell wall porosity in yeasts, which is based on polycation-induced leakage of UV-absorbing compounds. Polycations with a small hydrodynamic radius as measured by gel filtration (poly-L-lysine) caused cell leakage independent of cell wall porosity whereas polycations with a large hydrodynamic radius (DEAE-dextrans) caused only limited cell leakage due to limited passage through the cell wall. This allowed the ratio between DEAE-dextran- and poly-L-lysine-induced cell leakage to be used as a measure of cell wall porosity in Saccharomyces cerevisiae, Kluyveromyces lactis and Schizosaccharomyces pombe. Using this assay, we found that the composition of the growth medium affected cell wall porosity in S. cerevisiae. In addition, we could show that cell wall porosity is limited by the number of disulphide bridges in the wall and is dependent on cell turgor. It is argued that earlier methods to estimate cell wall porosity in S. cerevisiae resulted in large underestimations.     

Absence of cell wall chitin in Saccharomyces cerevisiae leads to resistance to Kluyveromyces lactis killer toxin

Kluyveromyces lactis killer toxin causes sensitive strains of a variety of yeasts to arrest at the G1 stage of the cell cycle, and to lose viability. We describe here the isolation and characterization of a class of recessive mutations in Saccharomyces cerevisiae that leads to toxin resistance and a temperature-sensitive phenotype. These mutant cells arrest growth at 37°C with a characteristic phenotype of elongated buds. Cloning of the gene complementing these defects revealed it to be CAL1, coding for chitin synthase 3 activity. Calcofluor staining of the mutant cells indicated that chitin is absent both at 23°C and 37°C. Given that the CAL1 activity is responsible for the synthesis of most of chitin in yeast cells, and that in its absence the cells are viable but resistant to the killer toxin, our results strongly suggest that chitin might represent the receptor for this killer toxin.     

The linkage of (1–3)-β-glucan to chitin during cell wall assembly in Saccharomyces cerevisiae

Pulse-chase experiments with [¹⁴C]glucose demonstrated that in the cell wall of wild-type Saccharomyces cerevisiae alkali-soluble (1–3)-β-glucan serves as a precursor for alkali-insoluble (1–3)-β-glucan. The following observations support the notion that the insolubilization of the glucan is caused by linkage to chitin: (i) degradation of chitin by chitinase completely dissolved the glucan, and (ii) disruption of the gene for chitin synthase 3 prevented the formation of alkali-insoluble glucan. These cells, unable to form a glucan–chitin complex, were highly vulnerable to hypo-osmotic shock indicating that the linkage of the two polymers significantly contributes to the mechanical strength of the cell wall. Conversion of alkali-soluble glucan into alkali-insoluble glucan occurred both early and late during budding and also in the ts-mutant cdc24-1 in the absence of bud formation.     

Actin patch assembly proteins Las17p and Sla1p restrict cell wall growth to daughter cells and interact with cis-Golgi protein Kre6p

The cytoplasmic tail of Kre6p, a Golgi membrane protein involved in cell wall synthesis, interacts with the actin patch assembly components Las17p and Sla1p in a two-hybrid assay, and Kre6p co-immunoprecipitates with Las17p. Kre6p showed extensive co-localization with Och1p-containing cis-Golgi vesicles. The correct localization of Kre6p requires its cytoplasmic tail, Las17p, Sla1p and Vrp1p, suggesting that the cytoplasmic tail of Kre6p acts as a receptor, linking this cis-Golgi protein to Las17p and Sla1p. The actin patch assembly mutants las17 delta, sla1delta and vrp1 delta showed elevated levels of cell wall beta-1,6-glucan, and mutant cells were capable of only a limited number of cell divisions compared to wild-type. EM image analysis and beta-1,6-glucan localization indicated abnormal wall proliferation in the mother cells of these mutants. The pattern of cell wall hypertrophy indicates a failure to restrict cell wall growth to the bud.     

Functional,comparative and cell biological analysis of Saccharomyces cerevisiae Kre5p

Saccharomyces cerevisiae kre5delta mutants lack beta-1,6-glucan, a polymer required for proper cell wall assembly and architecture. A functional and cell biological analysis of Kre5p was conducted to further elucidate the role of this diverged protein glucosyltransferase-like protein in beta-1,6-glucan synthesis. Kre5p was found to be a primarily soluble N-glycoprotein of approximately 200 kDa, that localizes to the endoplasmic reticulum. The terminal phenotype of Kre5p-deficient cells was observed, and revealed a severe cell wall morphological defect. KRE6, encoding a glucanase-like protein, was identified as a multicopy suppressor of a temperature-sensitive kre5 allele, suggesting that these proteins may participate in a common beta-1,6-biosynthetic pathway. An analysis of truncated versions of Kre5p indicated that all major regions of the protein are required for viability. Finally, Candida albicans KRE5 was shown to partially restore growth to S. cerevisiae kre5delta cells, suggesting that these proteins are functionally related.