[CuL(H2O)2]{[CuL][Fe(CN)6]}2·2H2O (L=3,10-Bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane): A Novel Three-Dimensional Coordination Polymer via H-Bonded Linkages of One-Dimensional Zigzag Chain

A complex with the formula [CuL(H₂O)₂]{[CuL][Fe(CN)₆]}₂·2H₂O, where L=3,10-bis(2-hydroxyethyl)-1,3,5,8,10,12-hexaazacyclotetradecane, has been synthesized and crystallographically characterized. The structure is composed of a one-dimensional zigzag chain of $\left\{ {[{\text{CuL}}][{\text{Fe(CN)}}_{\text{6}} ]} \right\}_2^{2 - } $ units, and [CuL(H₂O)₂]²⁺ units. The one-dimensional zigzag chain extents through ${\text{Cu}}{\kern 1pt} - {\kern 1pt} {\text{CN}} - {\kern 1pt} {\text{Fe}}{\kern 1pt} - {\kern 1pt} {\text{CN}} - {\kern 1pt} {\text{Cu}}$ linkages. The adjacent two polymer chains are linked by the ${\text{O}}{\kern 1pt} - {\kern 1pt} {\text{H}}{\kern 1pt} \cdot \cdot \cdot {\kern 1pt} {\text{N}}{\kern 1pt} \equiv {\kern 1pt} {\text{C}}{\kern 1pt} - $ hydrogen bonding between [CuL(H₂O)₂]²⁺ and [Fe(CN)₆]^3?, forming a 3D supramolecular structure with inner hydrophilic channels. Magnetic susceptibility measurements show no exchange interaction between the Cu(II) and Fe(III) ions due to the longer ${\text{Cu}}{\kern 1pt} - {\kern 1pt} {\text{N}}$ (axial) bond length.     

New host–guest supramolecular coordination polymers based on [(Me3Sn)3Fe(CN)6]n with alkali metal iodides and their applications as electrode materials in batteries

The metal iodides reduce partially the host coordination polymer of the type $ ^{ 3}_{\infty } \left[ {\left( {{\text{Me}}_{ 3} {\text{Sn}}} \right)_{ 3} {\text{Fe}}\left( {\text{CN}} \right)_{ 6} } \right] $ , I, to give new host–guest supramolecular coordination polymers (SCP). The physical and chemical characteristics of the new products were studied by elemental analyses, X-ray powder diffraction, IR, UV/Vis, and solid state NMR spectra. The host–guest SCP are [M_x(Me₃Sn)₃Fe_(1–x)^IIIFe _x ^II (CN)₆]_n M = Li⁺·2H₂O, 1; Li⁺, 2; Na⁺, 3; K⁺, 4; Cu⁺, 5, [Li(Me₃Sn)₃Fe^II(CN)₆]_n, 6 and [(LiDEE)_0.9(Me₃Sn)₃Fe _o.1 ^III Fe _o.9 ^II (CN)₆]_n, 7. The stoichiometry and nature of the guest depend on the type of the metal iodide and the reaction conditions. The polymeric nature of these SCP is due to the presence of trigonal bipyramidal configured structure which bridges between the single d-transition metal ions. The host–guest SCP containing the Li ions have been tested as electrodes to construct four different lithium-ion batteries.     

Determination of equilibrium silver sulphate concentration in the system Cu-H2SO4-CuSO4-H2O-Ag2SO4-Ag as a function of composition

The value of the ratio \(\gamma _{{\text{Cu}}^{{\text{2 + }}} } /\gamma _{{\text{Ag}}^{\text{ + }} }^2 \) ( \(\gamma _{{\text{Cu}}^{{\text{2 + }}} } ,\gamma _{{\text{Ag}}^{\text{ + }} } \) -are the mean activity coefficients of copper and silver ions, respectively) was calculated from the measured emf of the cell $${\text{Cu(Hg)|H}}_{\text{2}} {\text{SO}}_{\text{4}} {\text{ (}}c_{\text{x}} {\text{)}} - {\text{CuSO}}_{\text{4}} {\text{ (}}c_{\text{y}} {\text{)|Hg}}_{\text{2}} {\text{SO}}_{\text{4}} {\text{, Hg}}$$ and the solubility of Ag₂SO₄ in H₂SO₄ (c _x) and CuSO₄ (c _y) solutions. The concentration of H₂SO₄ in the solution was varied from 0.5 to 2.1 mol dm^?3 that of CuSO₄ from 0.4 mol dm^?3 to saturation. The results were presented as a function: $$\frac{{\gamma _{{\text{Cu}}^{{\text{2 + }}} } }}{{\gamma _{{\text{Ag}}^{\text{ + }} }^2 }} = a_0 + a_1 c_{\text{x}} + a_2 c_{\text{y}} + a_3 c_{\text{x}}^{\text{2}} + a_4 c_{\text{x}} c_{\text{y}} + a_5 c_{\text{y}}^2 .$$ This function allows the estimation of the equilibrium silver ion concentration \(c_{{\text{Ag}}^{\text{ + }} }^{{\text{eq}}} \) in solutions containing both H₂SO₄ and CuSO₄ in the presence of metallic copper. The function is also very useful for the estimation of the \(c_{{\text{Ag}}^{\text{ + }} }^{{\text{eq}}} \) near a working copper electrode.     

Comportement electrochimique de NbCl5 en milieu NaCl-KCl pur et additionne d'ions fluorure

Dans le domaine de température 700–800°C, les solutions d'ions niobium obtenues par addition de NbCl₅ dans le melange équimolaire NaCl-KCl, sont réduites jusqu'au métal en une seule étape: $${\text{Nb(IV) }} + {\text{ 4e}}^ - \Leftrightarrow {\text{Nb(o)}}$$ Cet échange est réversible, il lui correspond le potentiel standard apparent: $$E_{Nb(IV)/Nb}^{'0} = - 0.64V(Ag - AgCl) \pm 0.01V$$ Les espéces Nb(iv) sont oxydées selon le processus réversible: $${\text{Nb(IV)}} \Leftrightarrow {\text{Nb(v)}} + {\text{e}}^ -$$ Le potentiel standard apparent associé est: $$E_{Nb(IV)/Nb}^{'0} = - 0.74V(Ag - AgCl) \pm 0.05V$$ L'ajout d'ions fluorure déstabilise le complexé NbCl₆ ^2? au profit du complexe NbF₆ ^2? . Ceci se traduit par un déplacement du pie cathodique vers des potentiels plus cathodiques mais le mécanisme de réduction comporte toujours une seule étape mettant en jeu quatre électrons. Dans ces milieux des dépôts de niobium métallique ont eté obtenus caractérisés par rayon X. In the 700–800°C temperature range, NbCl₅ solutions in equimolar NaCl-KCl mixtures are reduced to the metal through a single step: $${\text{Nb(IV)}} + 4{\text{e}}^ - \Leftrightarrow {\text{Nb(o)}}$$ This exchange is reversible and the corresponding apparent standard potential is: $$E_{Nb(IV)/Nb}^{'0} = - 0.64V(Ag - AgCl) \pm 0.01V$$ The Nb(iv) species are oxidized according to the following reversible process: $${\text{Nb(IV)}} \Leftrightarrow {\text{Nb(v)}} + {\text{e}}^ -$$ The associated apparent standard potential is: $$E_{Nb(IV)/Nb}^{'0} = - 0.74V(Ag - AgCl) \pm 0.05V$$ The addition of fluoride ions destabilizes the NbCl₆ ^2? complex and yields the NbF₆ ^2? complex. The cathodic peak potential moves toward more cathodic potentials, but the reduction mechanism still involves a single step with four electrons exchanged. In these media, metallic niobium deposits have been obtained, and characterized through X-ray analysis.     

Structure and Biological Behaviors of Some Metallo Cationic Surfactants

In this study, different cationic surfactants were prepared by esterification with bromoacetic acid of different fatty alcohols, i.e., dodecyl, tetradecyl and hexadecyl species. The products were then reacted with diphenyl amine, and the resulting tertiary amines were quaternized with benzyl chloride to produce a series of quaternary ammonium salts. The metallocationic surfactants were prepared by complexing the cationic surfactants with nickel and copper chlorides. Surface tension of these surfactants were investigated at different temperatures. The surface parameters including critical micelle concentration (CMC), maximum surface excess (Γ _max), minimum surface area (A _min), efficiency (PC₂₀) and effectiveness (π _CMC) were studied. The thermodynamic parameters such as the free energy of micellization ( $\Updelta G_{\text{mic}}^{^\circ }$ ) and adsorption ( $\Updelta G_{\text{ads}}^{^\circ }$ ), enthalpy ( $\Updelta H_{\text{m}}^{^\circ }$ ), ( $\Updelta H_{\text{ads}}^{^\circ }$ ) and entropy ( $\Updelta S_{\text{m}}^{^\circ }$ ), ( $\Updelta S_{\text{ads}}^{^\circ }$ ) were calculated. FTIR spectra and ¹H-NMR spectra were obtained to confirm the compound structures and purity. In addition, the antimicrobial activities were determined via the inhibition zone diameter of the prepared compounds, which were measured against six strains of a representative group of microorganisms. The results indicate that these metallocationic surfactants exhibit good surface properties and good biological activity on a broad spectrum of microorganisms.     

Thermodynamic Properties of Sulfobetaine-Type Surfactants

Sulfobetaine-type surfactants containing a hydroxy group were synthesized by the reaction of long chain monoalkyl dimethyl tertiary amine with 3-chloro-2-hydroxypropanesulfonic acid sodium salt. The structures were characterized by ¹H NMR and ESI-MS. Their critical micelle concentrations (CMC) in aqueous solution were determined by the plate method in the temperature rang from 298.15 to 328.15 K. The thermodynamic parameters of micellization ( $\Delta G_{\text{mic}}^{\theta}$ , $\Delta H_{\text{mic}}^{\theta}$ and $\Delta S_{\text{mic}}^{\theta}$ ) and surface adsorption ( $\Delta G_{\text{ad}}^{\theta}$ , $\Delta H_{\text{ad}}^{\theta}$ and $\Delta S_{\text{ad}}^{\theta}$ ) were calculated from CMC data. The results showed that the micellization and surface adsorption of these surfactants in aqueous solution was a spontaneous and entropy-driven process. The micellization and surface adsorption became easier when the alkyl chain length increased from 12 carbon atoms to 14. The enthalpy–entropy compensation of micellization and adsorption was investigated. The compensation temperature were found to be (311 ± 2) K for both micellization and adsorption. The $\Delta H_{\text{mic}}^{*}$ and $\Delta H_{\text{ad}}^{*}$ decreased, but the $\Delta S_{\text{mic}}^{*}$ and $\Delta S_{\text{ad}}^{*}$ increased with increasing the hydrophobic chain length from 12 to 14.     

Magnetic cobalt-zinc ferrite/PVAc nanocomposite: synthesis and characterization

Metal oxide nanoparticles are the subject of current interest because of their unusual optical, electronic, and magnetic properties. In this work, cobalt zinc ferrite ( $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ ) nanoparticles have been synthesized successfully through redox chemical reaction in aqueous solution. The synthesized $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ nanoparticles have been used for the preparation of homogenous polyvinyl acetate-based nanocomposite ( $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} /{\text{PVAc}} $ ) via in situ emulsion polymerization method. Structural, morphological and magnetic properties of the products were determined and characterized in detail by X-ray powder diffractometry (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The XRD patterns of the $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ confirmed that the formed nanoparticles are single crystalline. According to TEM micrographs, the synthesized $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ nanoparticles had nano-needle morphology with an average particle size of 20 nm. The calculated coefficient of variation (CV) of nanoparticles diameters obtained by TEM micrographs was 16.77. The $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ nanoparticles were dispersed almost uniformly in the polymer matrix as was proved by SEM technique. The magnetic parameters of the samples, such as saturation magnetization (M _s) and coercivity (H _c) were measured, as well. Magnetization measurements indicated that the saturation magnetization of synthesized $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} /{\text{PVAc}} $ nanocomposites was markedly less than that of $ {\text{Co}}_{0.3} {\text{Zn}}_{0.7} {\text{Fe}}_{2} {\text{O}}_{4} $ magnetic nanoparticles. However, the nanocompoites exhibited super-paramagnetic behavior at room temperature under an applied magnetic field.     

Surface and Solution Properties of Amphiphilic Drug-Nonionic Surfactant Systems

A surface tension study was performed on mixed amphiphilic drug-nonionic surfactant systems. The drugs used were adiphenine hydrochloride and nortriptyline hydrochloride whereas surfactants were ethoxylated sorbitan esters and polyethylene oxide?Cpolypropylene oxide?Cpolyethylene oxide triblocks. The critical micelle concentration (CMC) and CMC^id (CMC at ideal mixing condition) values suggest nonideal and attractive interactions among the components. The micellar mole fraction $ (X_{ 1}^{\text{m}} ) $ values calculated using Rubingh??s model indicate predominance of the nonionic surfactant in micelle formation. The mole fraction of surfactant in mixed monolayer $ (X_{1}^{\sigma } ) $ values are greater than $ X_{ 1}^{\text{m}} $ values, indicating a greater contribution of surfactant in monolayer formation. Thermodynamic parameters, viz. Gibbs energy of micellization $ (\Updelta G_{\text{m}}^{\text{o}} ) $ , Gibbs energy of adsorption $ (\Updelta G_{\text{ad}}^{\text{o}} ) $ , and excess free energy of mixed micelles $ (\Updelta G_{\text{ex}}^{\text{m}} ) $ and monolayers $ (\Updelta G_{\text{ex}}^{\sigma } ) $ were also evaluated. All these values suggest stable mixed micelle and mixed monolayer formation.     

Micellization of Some Bile Salts in Binary Aqueous Solvent Mixtures

The micellization behavior of bile salts—sodium cholate and sodium deoxycholate was studied in aqueous methanol, ethanol and ethylene glycol mixtures (10–20 % v/v) over a temperature range (300–320 K) by surface tension and conductivity methods. Critical micelle concentration, extent of counter ion binding (α), interfacial property (A _min, ζ_max, π-CMC, $ \Updelta G_{\text{ad}}^{ \circ } $ ) and thermodynamic parameters ( $ \Updelta G_{\text{m}}^{ \circ } $ , $ \Updelta H_{\text{m}}^{ \circ } $ , $ \Updelta S_{\text{m}}^{ \circ } $ ) for the micellization process are reported and discussed.     

Active Sites of a NiSO4/γ-Al2O3 Catalyst for the Oligomerization of Isobutene

Structural characterization, the mechanism of catalytic activity generation and the nature of active sites of a NiSO₄/γ-Al₂O₃ catalyst for isobutene oligomerization were studied by temperature programmed reduction (TPR), X-ray diffraction (XRD), diffuse reflectance infrared fourier transformed (DRIFTS) and X-ray photoelectron spectroscopy (XPS) techniques. The TPR measurements together with the XRD data indicated that calcination of the catalyst at 500 °C did not form either nickel oxide or nickel aluminate. The presence of only one type of surface nickel species formed by the incorporation of nickel ions into the surface vacant sites of γ-alumina lattice was indicated by XPS with Ar⁺ ions sputtering and TPR measurements. XPS analysis of the calcined catalyst suggested that the oxidation state of nickel ions in the calcined catalyst was (+2) and after calcination the nickel ions were coordinated to relatively more basic ligands. The surface acid centers of the catalyst were found to be only Lewis type. SO₄ ^2? ions were found to be present as a chelating bidentate ligand and enhanced the acidity of metal ( $ {\text{Al}}^{3 + } $ and/or $ {\text{Ni}}^{2 + } $ ) Lewis acid centers. The results suggested that the combined effects of the presence of the bidentate SO₄ ^2? ligand and dehydroxylation generate coordinatively unsaturated $ {\text{Ni}}^{2 + } $ that interact with isobutene during the oligomerization reaction. The formation of lower-valent nickel ions ( $ {\text{Ni}}^{x + } ,x\; \le\; 1 $ ) was demonstrated by in situ DRIFTS using CO as a probe molecule and by XPS measurements. Formation of a binuclear bridging carbonyl complex, $ [{\text{Ni}}({\text{CO}})^{ + } ]_{2} $ suggested that some lower-valent nickel species were formed via in situ reduction by isobutene. Analysis of Ni 2p photolines indicated the appearance of a new lower-valent nickel species ( $ {\text{Ni}}^{x + } ,x \;\le\; 1 $ ) during the course of isobutene oligomerization. Hence it is plausible that lower-valent nickel species might act as the active center for the oligomerization reaction, while the SO₄ ^2? ions enhance the acidity of the Lewis acid sites on the surface and assist in the adsorption of reactant molecules on the surface.     

Characterization and Evaluation of Methylcyclopentane and Cyclohexane Ring Opening over Ir/ZrO2–MoO3 Catalysts

Methyl bromide was synthesized by reacting methane with oxygen and hydrogen bromide over Rh/SiO₂ catalyst. The reaction started from the oxidation of HBr to form active bromine species (Br^? radicals and Br* surface species), which in turn reacted with CH₄ to form CH ₃ ^? radicals and $\hbox{CH}_{3}^{\ast}$ surface species. These CH ₃ ^? and $\hbox{CH}_{3}^{\ast}$ species reacted with the active bromine species to form CH₃Br and CH₂Br₂. The presence of HBr inhibited the deep oxidation and the steam reformation of CH₄ and therefore, guaranteed the high selectivity of CH₃Br. In the presence of HBr, CO was formed from the oxidation and steam reformation of CH₃Br, while CO₂ was formed from the oxidation and steam reformation of CO over Rh/SiO₂ at reaction temperature higher than 560 °C.     

Living carbocationic polymerization

Conventional cationic polymerization can be converted into living carbocationic polymerization (LC^⊕Pzn) by the introduction of common anion into the charge. Thus the conventional polymerization of isobutylene (IB) induced by the 2-chloro-2,4,4-trimethylpentane (TMPCl)/TiCl₄ combination yields LC^⊕Pzn of IB upon the addition of tetrabutyl ammonium chloride (n-Bu₄NCl), most likely due to then-Bu₄NCl+TiCl₄ ?n-Bu₄N^⊕+TiCl ₅ ^⊕ equilibrium. A kinetic model has been developed and tested which corroborates these propositions. By this model we have gained for the first time quantitative insight into the quasiliving equilibrium.     

Electrochemical study of aluminium ion reduction in acidic AlCl3-n-butyl-pyridinium chloride melts

Electrochemical reduction of AlCl₃ dissolved in acidic AlCl₃-n-butyl-pyridinium chloride melt was studied by linear sweep voltammetry and chronopotentiometry at tungsten and platinum electrodes, in the Al₂Cl ₇ ^? concentration range 0.3 to 0.5 M between 30 and 60°C. Al₂Cl ₇ ^? bulk reduction was preceded by a nucleation (tungsten) or alloy formation phenomenon (platinum). The overall results agree rather well with the mechanism: $$\begin{gathered} 2AlCl_4^ - \rightleftarrows Al_2 Cl_7^ - + Cl^ - \hfill \\ 4Al_2 Cl_7^ - + 3e \rightleftarrows Al + 7AlCl_4^ - \hfill \\ \end{gathered} $$ The electrochemical reaction appeared quasi-reversible. Calculated values of the product of the transfer coefficient by the number of the electron exchanged in the rate determining step were in the range 0.45 to 0.7. Diffusion coefficients for Al₂Cl ₇ ^? were calculated.     

Hansen solubility parameters of cellulose acetate butyrate–poly(caprolactone) diol blend by inverse gas chromatography

The specific retention volumes, $ V_{\text{g}}^{0} $ , for adsorption of 21 solute probes on the solid surface of cellulose acetate butyrate (CAB)–poly(caprolactone) diol (PCLD) blend determined in the temperature range by inverse gas chromatography were used to evaluate Hansen solubility parameters (HSP). The effect of plasticizer, PCLD, on the HSP of CAB was investigated. The three components of HSP namely dispersive $ \delta_{2}^{\text{d}} $ , polar $ \delta_{2}^{\text{p}} $ , and hydrogen bonding $ \delta_{2}^{\text{h}} $ of the blend surface were compared with the CAB surface. The $ \delta_{2}^{\text{h}} $ of CAB was increased due to the addition of PCLD, while the change in the dispersive and polar components was found to be insignificant. The three HSP were decreasing linearly with increase of temperature for the blend as well as for pure CAB. The variation of HSP with weight fraction of CAB shown that the $ \delta_{2}^{\text{p}} $ was positively deviating from linearity whereas $ \delta_{2}^{\text{d}} $ and $ \delta_{2}^{\text{h}} $ were negatively deviating from linearity.     

Facile Electrospinning Preparation and Up-Conversion Luminescence Performance of Y3Al5O12:Er3+, Yb3+ Nanobelts

Electrospinning technique was used to prepare $ {\text{PVP}}/\left[ {{\text{Y}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} + {\text{Yb}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} + {\text{Er}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} + {\text{Al}}\left( {{\text{NO}}_{ 3} } \right)_{ 3} } \right] $ composite nanobelts and novel structures of Y₃Al₅O₁₂:Er³⁺, Yb³⁺ (denoted as YAG:Er³⁺, Yb³⁺ for short) nanobelts have been successfully fabricated after calcination of the relevant composite nanobelts at 900 °C for 8 h. YAG:Er³⁺, Yb³⁺ nanobelts were characterized by X-ray diffractometry (XRD), scanning electron microscopy (SEM) and fluorescence spectroscopy. XRD analysis indicated that YAG:Er³⁺, Yb³⁺ nanobelts were cubic in structure with space group I_a3d. SEM analysis and histograms revealed that the width of YAG:Er³⁺, Yb³⁺ nanobelts was ca. 1.8 ± 0.37 μm under the 95 % confidence level, and the thickness was ca. 81.8 nm. Up-conversion emission spectra analysis manifested that YAG:Er³⁺, Yb³⁺ nanobelts respectively emitted strong green and red emissions centering at 522, 554 and 648 nm under the excitation of a 980-nm diode laser. The green emissions were assigned to the energy levels transitions of $ ^{ 2} {\text{H}}_{ 1 1/ 2} ,^{ 4} {\text{S}}_{ 3/ 2} \to^{ 4} {\text{I}}_{ 1 5/ 2} $ of Er³⁺ ions, and the red emission originated from the energy levels transition of $ ^{ 4} {\text{F}}_{ 9/ 2} \to ^{ 4} {\text{I}}_{{{\text{l5}}/ 2}} $ of Er³⁺ ions. The up-conversion luminescence of YAG:Er³⁺, Yb³⁺ nanobelts doped with various concentrations of Yb³⁺ and Er³⁺ was studied and the optimum molar ratio of Yb³⁺ to Er³⁺ was found to be 15:1. CIE analysis demonstrated that color-tuned luminescence can be obtained by adjusting doping concentrations of Yb³⁺ and Er³⁺ ions, which could be applied in the fields of optical telecommunication and optoelectronic devices. The up-conversion luminescent mechanism and the formation mechanism of YAG:Er³⁺, Yb³⁺ nanobelts were also proposed.     

Surface characterization of cellulose acetate propionate by inverse gas chromatography

The purpose of this paper is to study the surface energetics of the polymer excipient cellulose acetate propionate (CAP) in the solid form. The net retention volumes, V _N, for n-alkanes and polar solutes have been measured in the temperature range 353.15–403.15 K by inverse gas chromatography. The dispersive surface free energy, $ \gamma_{\text{S}}^{\text{d}} $ , and Lewis acid–base parameters $ K_{\text{a}} $ and $ K_{\text{b}} $ , have been determined using V _N values. The $ \gamma_{\text{S}}^{\text{d}} $ values are decreased linearly with increase of temperature. The $ \gamma_{\text{S}}^{\text{d}} $ value at 353.15 K is 24.50 ± 1.54 mJ/m², and the temperature gradient was found to be ?0.287 mJ/m²/K¹. The $ K_{\text{a}} $ and $ K_{\text{b}} $ values are 0.410 ± 0.021 and 1.708 ± 0.388, respectively, which suggest that the CAP solid surface contain relatively more basic sites. The K _a and K _b values of CAP are compared with the similar values obtained on the cellulose acetate butyrate solid surface.     

Conduction in Bi2O3-based oxide ion conductor under low oxygen pressure. II. Determination of the partial electronic conductivity

In order to investigate the partial electronic conduction in the high oxide ion conductor of the system Bi₂O₃-Y₂O₃ under low oxygen pressure, e.m.f. and polarization methods were employed. Although the electrolyte was decomposed when the \(P_{{\text{O}}_{\text{2}} }\) was lower than the equilibrium \(P_{{\text{O}}_{\text{2}} }\) of Bi, Bi₂O₃ mixture at each temperature, the ionic transport number was found to be close to unity above that \(P_{{\text{O}}_{\text{2}} }\) . The hole conductivity (σ _p) and the electron conductivity (σ _p) could be expressed as follows, $$\begin{gathered} \sigma _p \Omega cm = 5 \cdot 0 \times 10^2 \left( {P_{O_2 } atm^{ - 1} } \right)^{{1 \mathord{\left/ {\vphantom {1 4}} \right. \kern-\nulldelimiterspace} 4}} \exp \left[ { - 106 kJ\left( {RT mol} \right)^{ - 1} } \right] \hfill \\ \sigma _p \Omega cm = 3 \cdot 4 \times 10^5 \left( {P_{O_2 } atm^{ - 1} } \right)^{ - {1 \mathord{\left/ {\vphantom {1 4}} \right. \kern-\nulldelimiterspace} 4}} \exp \left[ { - 213 kJ\left( {RT mol} \right)^{ - 1} } \right] \hfill \\ \end{gathered} $$ These values were much lower than the oxide ion conductivity under ordinary oxygen pressure.     

Electroplating silicon and titanium in molten fluoride media

The electrolytic reduction mechanisms of K₂SiF₆ and K₂TiF₆ solutions in LiF-KF and LiF-NaF-KF eutectic mixtures have been studied at temperatures between 550 and 850°C. The reduction of K₂SiF₆ proceeds by two successive electron transfers, $$Si(IV) + 2e \to Si(II) + 2e \to Si$$ coupled with an antidisproportionation reaction $$Si(IV) + Si \underset{{k_b }}{\overset{{k_b }}{\longleftrightarrow}} 2Si(II)$$ Very pure thin silicon layers, up to 300 μm thick, were obtained on a silver substrate. The cathodic reduction of TiF ₆ ^2? ions occurs in two well separated reversible steps, $$TiF_6^{2--} + e \to TiF_6^{3--} + 3e \to Ti + 6F^--$$ Adherent coatings of pure titanium were found to be linked to the copper substrate by an interdiffusion sublayer comprising Ti₂Cu, TiCu, Ti₂Cu₃ and TiCu₄ which were formed in a narrow potential domain preceding titanium deposition.