共查询到20条相似文献,搜索用时 234 毫秒
1.
有机锡类PVC热稳定剂及其协同作用的探讨 总被引:7,自引:0,他引:7
以有机锡为主体,加入金属皂、亚磷酸酯作为热稳定剂,对PVC塑料的热稳定效果进行了研究,发现有机锡与硬脂酸钡起到较好的协同作用,与硬脂酸镉、亚磷酸酯则无协同作用。 相似文献
2.
3.
4.
运用刚果红试纸法和热烘箱老化实验法,对硬质PVC(聚氯乙烯)用钙锌复合稳定剂的主要组分如硬脂酸钙、硬脂酸锌、多元醇、环氧大豆油、亚磷酸酯以及稳定性助剂等进行了考察,得到了各组分及各组分用量之间协同作用的关系,同时还得到了硬质PVC用钙锌复合热稳定剂的实用配方。 相似文献
5.
研究确定了几种稳定剂间的协同作用和较佳复配结果。研究结果表明:(1)Ca/Zn与环氧大豆油、亚磷酸酯、β-二酮均有较好的协同作用,优化的Ca/Zn稳定剂配方为:Ca/Zn总量2.0份、环氧大豆油5份、13-二酮0.4份、亚磷酸酯0.5份;Ca/Zn、13-二酮、ESO与有机锡有很好的协同效应。 相似文献
6.
有机锡和金属皂类热稳定剂并用对软质PVC脱HCl反应的影响 总被引:1,自引:0,他引:1
采用刚果红法研究了有机锡和金属皂类热稳定剂的并用对软质PVC脱HCl反应的影响。在实验过程中,硬脂酸钡(BaSt2)、硬脂酸钙(CaSt2)、硬脂酸锌(ZnSt2)分别单独、两两和三者混合后与双丁基硫醇锡并用。重点讨论了金属皂用量对软质PVC刚果红初始变色时间和完全变色时间以及初始变色温度的影响。实验结果表明,单独使用时,BaSt2与有机锡的并用效果最好,能产生明显的协同效应;在两两混合与有机锡并用的过程中,BaSt2/CaSt2的并用效果最好,它们与有机锡也能产生较明显的协同作用;而在3种金属皂与有机锡并用后,软质PVC的脱HCl过程不但没有被抑制,反而被加速。 相似文献
7.
8.
9.
稀土盐对聚氯乙烯热稳定作用的研究 总被引:9,自引:0,他引:9
研究了各种稀土稳定剂的合成工艺、配方及其对PVC热稳定性能、加工性能的影响,并用红外光谱法对其作用机理进行了初步探讨。结果表明:单一的水杨酸混合稀土盐对PVC有较好的热稳定作用;硬脂酸混合稀土同有机锡、环氧大豆油三者之间有协同效应,其动态热稳定时间及加工性能均优于水杨酸混合稀土稳定剂,可以用硬脂酸混合稀土部分代替价格昂贵的有机锡,具有实际应用价值 相似文献
10.
目前世界每年塑料热稳定剂的生产和消费量达30万t以上,仅次于增塑剂,我国每年的生产和消费量也在3万t以上。热稳定剂主要包括:铅盐类、有机锡类、金属皂类、复合热稳定剂、亚磷酸酯类、一元醇及多元醇类、环氧类和含氮化合物类,其中前四类占热稳定剂用量的 相似文献
11.
国外热稳定剂发展现状 总被引:1,自引:0,他引:1
蔡宏国 《精细与专用化学品》1999,7(12):7-8,16
PVC产量的增加刺激着热稳定剂消费量的增长,目前,全球热稳定剂的消费量约为30万t/a。不同国家和地区在热稳定剂品种构成上依然有较大差异,如美国以有机锡类和复合钡/镉皂类为主,日本和西欧还仍然以铝盐类产品为主。 相似文献
12.
三月桂酸单丁基锡对PVC热稳定性的影响 总被引:3,自引:0,他引:3
用刚果红试纸测试含有三月桂酸单丁基锡和二月桂酸二丁基锡的PVC的静态热稳定性和脱HCl温度。研究发现:采用三月桂酸单丁基锡,PVC的初期热稳定性优于二月桂酸二丁基锡,而长期热稳定性略差于二月桂酸二丁基锡;采用三月桂酸单丁基锡,PVC的脱HCl温度与含有二月桂酸二丁基锡的大致一样。用Brabender流变仪测试含有三月桂酸单丁基锡和二月桂酸二丁基锡的PVC的润滑性和动态热稳定性,根据流变仪扭矩的大小进行分析可知,三月桂酸单丁基锡的润滑性低于二月桂酸二丁基锡;采用三月桂酸单丁基锡后,PVC的动态热稳定性劣于二月桂酸二丁基锡。 相似文献
13.
14.
15.
Nadge Pantoustier Bndicte Lepoittevin Michaël Alexandre Philippe Dubois Dana Kubies Cdric Calberg Robert Jrme 《Polymer Engineering and Science》2002,42(9):1928-1937
Nanocomposites based on biodegradable poly(?‐caprolactone) (PCL) and layered silicates (montmorillonite, MMT) were prepared either by melt interaction with PCL or by in situ ring‐opening polymerization of ?‐caprolactone as promoted by the so‐called coordination‐insertion mechanism. Both non‐modified clays (Na+ ‐MMT) and silicates modified by various alkylammonium cations were studied. Mechanical and thermal properties were examined by tensile testing and thermogravimetric analysis. Even at a filler content as low as 3 wt% of inorganic layered silicate, the PCL‐layered silicate nanocomposites exhibited improved mechanical properties (higher Young's modulus) and increased thermal stability as well as enhanced flame retardant characteristics as a result of a charring effect. It was shown that the formation of PCL‐based nanocomposites depended not only on the nature of the ammonium cation and related functionality but also on the selected synthetic route, melt intercalation vs. in situ intercalative polymerization. Interestingly enough, when the intercalative polymerization of ?‐caprolactone was carried out in the presence of MMT organo‐modified with ammonium cations bearing hydroxyl functions, nanocomposites with much improved mechanical properties were recovered. Those hybrid polyester layered silicate nanocomposites were characterized by a covalent bonding between the polyester chains and the clay organo‐surface as a result of the polymerization mechanism, which was actually initiated from the surface hydroxyl functions adequately activated by selected tin (II) or tin (IV) catalysts. 相似文献
16.
Klaus Jacob Naka Seidel Frank Voigt Axel Fischer Claus Pietzsch Jaroslav Holecek Antonin Lycka Marco Fontani Emanuela Grigiotti Piero Zanello 《Advanced Synthesis \u0026amp; Catalysis》2000,342(6):574-584
SnCl4 reacts with [1,2‐(N,N‐dimethylaminomethyl) ferrocenyl]lithium (FcNLi) under formation of the organo tin compounds of the four valued tin (FcN)n SnCl 4‐n [n = 1( 1 ), 2( 2 ), 3( 3 ), 4( 4 )]. The heterobimetallic chelate complex bis[1,2‐(N,N‐dimethylaminomethyl)ferrocenyl]tin(II) (FcN)2 Sn ( 5 ) is formed at the reaction of SnCl2 with two equivalents of FcNLi. The heterobimetallic tin compounds 1 — 5 were characterized by 1H NMR‐, 13C‐NMR and mass spectroscopy, single crystal x‐ray analyses ( 1,3,4,5 ), 57 Fe‐Moessbauer spectroscopy ( 1, 3, 4, 5 ), respectively cyclic voltammetry. 相似文献
17.
锡及其合金镀层的氧化腐蚀与防护 总被引:1,自引:0,他引:1
测试了锡及其合金镀层经电接触润滑保护剂涂覆后的耐湿热性、耐高温老化性及可焊性,分析了锡及其合金镀层的腐蚀防护原理.试验结果表明,涂覆电接触润滑剂可提高锡及其合金镀层的耐湿热性、耐高温老化性及可焊性,效果满足国家标准要求. 相似文献
18.
有机粘土吸附处理水中苯酚的性能及应用 总被引:18,自引:0,他引:18
分别用溴化十六烷基三甲铵(CTMAB)、氯化十六烷基吡啶(CPC)和氯化十四烷基吡啶(TPC)改性膨润土、沸石和硅藻土;探讨了制备有机粘土的适宜条件;研究了粘土类型、表面活性制种类及其浓度对有机粘土吸附处理水中苯酚性能的影响。结果表明,有机粘土吸附处理苯酚的性能较钉适应的的土好得多。通过X-衍射分析等手段探讨了有机粘土的结构及其吸附处理。 相似文献
19.
20.