Synthesis of yellow pyridonylazo colorants and their application in dye–pigment hybrid colour filters for liquid crystal display

Nine yellow azo dyes were designed and synthesised by using different diazo components and pyridonyl coupling components for application in dye–pigment hybrid colour filters for liquid crystal displays. The synthesised dyes were characterised by proton nuclear magnetic resonance and elemental analysis. The thermal stability was examined by thermogravimetric analysis, and solubility was estimated in industrial solvents such as N-methyl-2-pyrrolidone and propylene glycol methyl ether acetate. The dyes, which exhibited suitable physical properties for use in a dye–pigment hybrid colour filter, were fabricated into colour filters, and their optical properties were measured.     

Michromatic scope for enhancement of color difference

A michromatic (microscope plus chromatic) scope is a device that enhances the color discrimination between two spectral color datasets. Three spectral filters are required, instead of the conventional red, green, and blue filters, for the implementation of a michromatic camera. In this study, we describe two approaches to the design of these filters: in the first case, the design is based on the direct optimization of the filter characteristics (transmittance), whereas in the second case, the design is based on the nonnegative tensor factorization (NTF) of the spectral datasets. A michromatic camera can be implemented using these filters along with compatible postprocessing in‐camera firmware. Here, we performed experiments with two color datasets: one comprising skin and vein colors, and one comprising skin and cosmetics colors. These were further divided into a training set and a test set. The filters were defined using the training set, and the operation of the filters was tested and magnified using the test set. Our experiments demonstrated that the proposed approaches are suitable for color discrimination. For the first color dataset, the enhancement produced using the optimized filters was up to 252% of the original value, and the average color difference ΔE was increased from 2.82 to 9.93. NTF and preprocessing further enhanced the ΔE up to 21.84. For the second color dataset, NTF and postprocessing enhanced the ΔE from 4.33 to 29.19. The proposed discrimination enhancement could be physically implemented in a designated digital charge‐coupled device camera with proper filter installation and compatible postprocessing. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

Matrix Partitioning Applied to Colorant Formulation with Four or More Dyes

Algorithms for formulating colorant combinations of more than three dyes are based on a process of conditioned-least-squares minimization. Using a technique of matrix partitioning, rather than the classical procedure which uses undetermined Lagrangian multipliers, it is possible to reduce the problem to a lower-order one of unconstrained minimization followed by matrix substitution. The system also yields a correction matrix which may be employed to improve the metameric match of a trial dyeing by adjusting the first three dyes of the set. The algorithms have been incorporated into a colour-matching program using a PDP11-VO3 minicomputer. Included in a number of subroutines for matrix manipulation is one called GINV, which produces a generalized inverse with features designed to achieve best possible accuracy. It is demonstrated that the generalized inverse provides versatility without requiring elaborate modifications of programming, since the generalized inverse may be directly applied to solving least-squares problems. This feature may be useful when setting up the initial recipe approximation for more than three dyes, and it can yield directly the best approximation to a tristimulus match where the colour to be matched calls for two dyes or a single dye.     

Optical implementation of spectral filtering for the enhancement of skin color discrimination

Light reflected from an object contains a range of information about its physical and chemical properties. Changes in the physical properties of an object can sometimes be evident as barely detectable changes of color. Our earlier study (Proceedings of the 15th Color Imaging Conference, Albuquerque, New Mexico, 2007. p 195–200) proposed a method for designing a spectral filter to enhance visual discrimination. Two filters were designed: one to discriminate skin and vein colors on human arms, and other to discriminate human facial colors in the presence and absence of cosmetics. In this study, the filters with theoretically designed spectral transmittances were implemented as real optical filters. Visual inspection of RGB color images taken with a digital camera through the developed optical filters showed clear enhancement of discrimination of two preselected colors. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2012     

Laser-induced birefringence of methyl red in a polymeric nanocomposite prepared by sol–gel method

Non-linear optical (NLO) dyes used as guests in polymeric films have recently attracted interests in optical applications. In this regard, dye-grafted polymeric systems can outperform conventional guest?Chost dye-containing films because they have lower loading limitations and aggregation problems. These give rise to enhanced molecular orientation. The work presented here is an attempt to study the laser-induced birefringence for a novel sol?Cgel based polymeric nanocomposite prepared by reacting an NLO dye (methyl red) and an epoxy silane coupling agent at different concentrations of dye. 3-Glycidoxy propyltrimethoxysilane was hydrolyzed and condensed to prepare a siloxane structure from which a dye-containing hybrid was obtained. The structural and morphological properties of the resulting nanocomposites were studied by FTIR spectroscopy, differential scanning calorimetry and transmission electron microscopy. Results showed that the dye was chemically attached to the siloxane structure built through sol?Cgel processing. This chemical modification leads to nanostructured morphology in which inorganic phase was entangled to the organic phase. The size of clusters formed was 60?C80?nm in dimension. The optical responses of nanocomposites were investigated at different process parameters, including dye concentration, film thickness and curing regimes. These were then discussed based on the photochemical and photothermal properties of the dye molecules, the rotation dynamic of which was shown to strongly depend on the physical and chemical properties of the host. The samples with 8 wt% of dye revealed the maximum birefringence, while the sample with 10 wt% showed the best memory effect. The best condition for curing was found to be 24?h. By increasing the film thickness, there was an increase in the amount of induced birefringence.     

A novel method for determination of compatibility of dyes by means of principal component analysis

A novel method for determination of the compatibility of dyes in mixtures based on the application of principal component analysis is presented. The well known dip‐test method is used to dye samples in different binary combinations of cationic dyestuffs. The spectral reflectance of different samples of each mixture that dyed with a given set of dyestuffs by dip‐test method has been measured and the corresponding K/S values are calculated. The actual dimensional properties of each mixture are evaluated by using principal component analysis technique and determination of cumulative percentage variance of the eigenvalues of proposed datasets. Ideally, the K/S spectral data of fully compatible pairs scatter around one dimension, while proportional to the degree of incompatibility of dyes in the mixture, other dimensions should be taken into account and cannot be ignored. Strong correlations are found between the calculated percentage variance and the traditional compatibility values of dyes shown by K value for cationic dyestuffs. The validity of suggested technique is also reconfirmed by normalization of spectral K/S data obtained from different dye sets. © 2010 Wiley Periodicals, Inc. Col Res Appl, 2010     

彩色光刻胶用蒽醌染料的合成及稳定性研究

为实现彩色滤光片更高分辨率的发展需求，作为关键原材料的彩色光刻胶着色剂从颜料向染料体系转变是重要的趋势。然而染料分子的光热稳定性较差，亟需从分子结构方面探索提升稳定性的有效策略。以1,4,9,10-蒽四醇为原料，合成了9种1,4-二氨基取代的蓝色蒽醌染料分子，探索了不同取代基对染料分子光物理性质、溶解性以及光热稳定性的影响。结果表明，所有染料分子在590~600 nm和630~650 nm波长范围内呈现双吸收峰性质，具有高的摩尔消光系数。其中三甘醇及单甲醚取代的染料分子热分解温度为300℃，在230℃加热0.5 h后失重约2%，365 nm波长光照射8 h后色差低于1.73，表现出优异的光热稳定性。研究为进一步制备光热稳定性优异的彩色光刻胶用染料分子奠定了基础。     

Effect of nanoclays on the dyeability of polypropylene nanocomposite fibres

Polypropylene clay fibres loaded with different alkylammonium-modified montmorillonite were prepared using a melt spinning technique and relationships between the structure and properties of the nanopolypropylene fibres are discussed. Experiments carried out using transmission electron microscopy showed that the chemical structure of the organic modifier and the interlayer spacing of the clay induced different dispersions of the clay, thus improving accessibility of the nano fibre. It is known that nanoclays are effective and efficient sorbents for dyes. Therefore, the dyeing behaviour of the nano polypropylene fibres with two distinct acid dyes and a disperse dye was studied and the build-up of dyes, measured as colour yield, reported. The best results were obtained when the clay was well dispersed in nanopolypropylene fibres; that is, when maleated polypropylene was added as a compatibiliser and when disperse dye was used. Good wash fastness was then obtained.     

An all-green cellulose acetate/corn cob composite membrane filter: A critical evaluation of its morphology and adsorption characteristics for dyes and heavy metals

Industrial wastewater from various manufacturing sectors poses a significant environmental concern due to the release of dyes, heavy metals, and pollutants into natural water streams. Effective treatment of large volumes of industrial wastewater is crucial to mitigate this issue. Conventional industrial wastewater filtration systems often prove to be inefficient, necessitating the exploration of alternative and cost-effective water filtration methods. In this study, we drew inspiration from the natural adsorption and purification properties of corncob to develop a novel green composite membrane filter. The composite membrane filters, named MCAPCB and MCATPCB, were formulated by incorporating powdered corncob (PCB) and alkali/hydrogen peroxide-treated powdered corncob (TPCB) into cellulose acetate. The adsorption properties of the composite filters were evaluated using UV–Vis spectrophotometry for dye adsorption and inductively coupled plasma optical emission spectroscopy (ICP-OES) and atomic absorption spectroscopy (AAS) for heavy metal adsorption. The results demonstrated that MCATPCB20, incorporating 20 wt% TPCB, exhibited remarkable performance in the removal of methylene blue dye, with an adsorption efficiency of 97.46%. In comparison, MCAPCB20, incorporating 20 wt% PCB, achieved a dye adsorption efficiency of 80.15%. Moreover, MCATPCB20 displayed exceptional heavy metal removal capabilities, effectively rejecting 98% and 95% of cadmium and lead, respectively, from water samples containing 1 ppm of each metal. The composite filter membranes containing 20 wt% TPCB exhibited superior adsorption efficiency, flexibility, and stability. This enhanced performance can be attributed to the higher carboxyl content in TPCB, achieved through alkali treatment, which significantly increased the adsorption capacity of MCATPCB20. Characterization studies employing XRD, SEM, contact angle, BET, ICP-OES, and UV measurements further supported the efficacy of MCATPCB as an effective filter system for water purification.     

Application of nanofibers to improve the filtration efficiency of the most penetrating aerosol particles in fibrous filters

Conventional, mechanical fibrous filters made of microfibers exhibit a local minimum of fractional collection efficiency in the aerosol particle size-range between 100 and 500 nm, which is called the most penetrating particle size (MPPS). Simple theoretical calculations predict that this efficiency may be significantly increased using nanofibrous media. The main objective of this paper is an experimental verification of these expectations and simultaneously checking whether this anticipated gain in the filtration efficiency is not overpaid with an excessive pressure drop. For this purpose we developed a modified melt-blown technology, which allowed us to produce filters composed of micrometer as well as nanometer sized fibers. One conventional microfibrous filter and five nanofibrous filters were examined. The complete structural characteristics, pressure drop and efficiency of removal of aerosol particles with diameters 10-500 nm were determined for all media. The results of the experiments confirmed that using nanofibrous filters a significant growth of filtration efficiency for the MPPS range can be achieved and the pressure drop rises moderately. Simultaneously, we noticed a shift of the MPPS towards smaller particles. Consequently, the quality factor for bilayer systems composed of a microfibrous support and a nanofibrous facial layer was considerably higher than this one for a conventional microfibrous filter alone. Additionally, it was found that utilization of many-layer nanofibrous filters combined with a single microfibrous backing layer is even more profitable from the quality factor standpoint. Comparing experimental results with theoretical calculations based on the single-fiber theory we concluded that for microfibrous filters a fairly good agreement can be obtained if the resistance-equivalent fiber diameter is used in calculations instead of the mean count diameter determined from the SEM images analysis; in the latter case, filtration efficiency computed theoretically is slightly overestimated. This is even more evident for nanofibrous media, suggesting that in such case a structural filter inhomogeneity has a strong influence on the filter efficiency and its resistance and one should strive for minimization of this effect manufacturing nanofibrous filters as homogeneous as possible. We can finally conclude that fibrous filters containing nanofibers, which are produced using the melt-blown technique, are very promising and economic tools to enhance filtration of the most penetrating aerosol particles.     

Application of ant colony optimization to color matching of dyed cotton fabrics with direct dyestuffs mixtures

Color matching and recipe prediction is one of the most important aspects of color science. In this article, a new method using ant colony algorithm is developed to optimize the color formulation step. Four direct dyes, namely CI Direct Red 227, CI Direct Orange 34, CI Direct Blue 85, and CI Direct Black 22 were used and mixed to dye cotton fabrics. The aim is to reproduce the desired shades by determining the dyes and their respective concentrations to add in the dye bath. The criterion of optimization is to minimize the CMC color differences between the target color and the color obtained by the proposed recipes. The developed algorithm showed good performances with small color differences all lower than the unit.     

The synthesis and application of thermally stable dyes for ink-jet printed LCD color filters

Although dyes have superior spectral characteristics, they are not widely used as coloring materials for liquid crystal display color filters owing to their low thermal stability. Four perylene and four phthalocyanine dyes of high thermal stability were synthesized and then used to fabricate color filters. The spectral and thermal stabilities of the color filters were investigated by comparing them with pigment-dispersed color filters. The transmittance and color properties of the prepared color filters were higher and the thermal stability was similar to those of the pigment-dispersed color filters. The results showed that the prepared dyes could be successfully applied in ink-jet printed liquid crystal display color filters.     

An analysis of the substantivity of hydrolysed reactive dyes and its implication for rinsing processes

Substantivity plays a key role in dyeing processes, for dye exhaustion and fixation as well as for dye removal during rinsing. The latter is especially relevant for reactive dyes when the hydrolysed dye has to be removed from the fibre. The substantivity of the hydrolysed form of 46 commercially important reactive dyes was analysed at two temperatures for a wide range of dye amounts, pH values and electrolyte concentrations. The results showed that substantivity was highly dye‐specific and varied, for each variable analysed, almost within the entire theoretically possible range of values. Substantivity values correlated best with the number of sulphatoethylsulphone groups in the dye molecule and dye solubility in the presence of sodium chloride. Sensitivity to electrolyte, pH, dye amount and temperature broadly correlated with each other, implying that a reduction in electrolyte concentration and an increase in pH and temperature are more beneficial in the removal of highly substantive reactive dyes. Some dyes remained highly substantive even at 90 °C, indicating that dye removal in industrial processes, too, would be difficult. For dyes with little substantivity, however, wash baths at the boil do not appear to be necessary, neither is the significant removal of electrolyte before rinsing at elevated temperature.     

Shrinking Core Model in characterizing aqueous phase dye adsorption

The fluid-solid non-catalytic reactive system is characterized by the widely accepted Shrinking Core Model. In the present investigation the same model has been applied to characterize the adsorption of Methylene Blue (MB) and Congo Red (CR) dyes in the aqueous phase onto Rice Husk Ash (RHA). The effective pore diffusivities of different dye molecules in RHA are determined by a suitable global optimization technique. The depth of penetration has also been estimated for various initial concentrations of dyes. The values predicted by the model are compared with experimental concentration profiles at different initial concentrations of these dyes. The theory-experiment comparison has revealed that predicted values are in excellent agreement with the experimental values.     

Non–destructive near–infra–red analysis for the identification of dyes on textiles

A pattern–recognition algorithm combined with near–infra–red reflectance spectroscopy has been modified to function as a non–destructive analysis technique for identifying dyes present on textiles. Samples of 261 dyes and textiles were measured in the 1100–2500 nm region to form a near–infrared (reflectance) spectral library. Principal component analysis (PCA) was used to generate an orthonormal reference library from the library of original spectra. The PCA algorithm treats the spectra in the library as an n component quantitative analysis problem in which each spectrum represents a standard mixture having a concentration of 1. 0 for that component. Spectra of dyed textiles were used as an unknown set in a library search. This new method saves time and materials in comparison with traditional methods of analysing dyes present on textile fibres. The library of dye spectra can be developed from measurements made directly on dye powder without interference from inorganic diluents. The method was successfully used to identify the dyes present on five textiles. The technique is particularly well suited for studying forensic, historic and archaeological textiles because of its non–destructive nature and ability to analyse small amounts of sample.     

Biological treatment of effluent containing textile dyes

Colour removal of textile dyes from effluent was evaluated using a laboratory 'upflow anaerobic sludge blanket' reactor. Several commercial dyes were selected to study the effect of dye structure on colour removal. The anaerobic reactor was fed with glucose, an easily biodegradable organic matter and selected individual dyes. Results show that some of the dyes are readily reduced under anaerobic conditions even at a high concentration of 700 mg/l. The average removal efficiency for acid dyes using this method was between 80 and 90% and that observed for the direct dye used was 81%. Laboratory experiments using the anaerobic reactor with disperse dyes, such as an anthraquinonebased dye, were unsuccessful even at low concentrations of 35 mg/l. Additional experiments were conducted to evaluate the toxicity of a selected disperse dye to an anaerobic environment. Results indicate that the purified dye is more toxic to the biomass than the commercial one.     

Production of ceramic foam filters for molten metal filtration using expanded polystyrene

Filtration of molten metals with ceramic foam filters is a proven method in order to remove the inclusions. This paper develops a new approach for the production of ceramic foam filters. In the conventional method of ceramic foam filter production, polyurethane sponges are used.In this work, ceramic foam filter was produced by using expanded polystyrene. Polystyrene is expanded in a specially designed mold by steam to form polystyrene patterns. Various ceramic slurries are then poured into the polystyrene cell and allowed to air dry. After the shaping operation, filters are subjected to sintering process under various conditions. By this new method, filter channel sizes can be controlled and traps with desired configurations can be formed. Some tests were applied to the produced filters. Thermal shock tests ensured that the filters could withstand temperatures of 1450 °C. Water absorption test showed that bauxide based material absorbed water more than the others.     

21世纪的染料学科和染料工业

从染料学科和染料工业在 2 0世纪发展的总体情况出发 ,就染料学科和染料工业范围、传统染料前景、染料工业生产急需解决的问题、基础研究关键课题等 4个方面预测了 2 1世纪染料学科和染料工业可能的发展前景 .     

Research on filter selection method for broadband spectral imaging system based on ancient murals

Digitization of cultural heritage protection has received considerable attention in heritage studies and spectral imaging technology has been playing an important role in this research. This article aims to study the technique of selecting optimal filter set to obtain ancient murals spectral image with high spectral and colorimetric accuracy based on the broadband spectral imaging system. The 330 Dunhuang murals mineral pigment color patches and the GretagMacbeth ColorChecker (CC) as well as 27 pieces of optical filters chosen as samples were examined. For each piece of filter, the three‐channel image was captured by the spectral imaging system. Then, 351 groups of six‐channel digital count images were acquired by arbitrary combinations of two among the 27 three‐channel digital count images. The pseudo‐inverse, principal component analysis, and R‐matrix methods were used to reconstruct the spectral reflectance from the six‐channel digital counts for each sample. Finally, this study identified the optimal filter set by evaluating the integrated error (TOTAL ERROR), which was calculated by normalizing the mean spectral root‐mean‐square error (RMS), mean spectral goodness‐of‐fit error (1‐GFC), and mean CIEDE2000 color difference (ΔE₀₀) and by multiplying them together. After the optimal optic filter set was selected, it was applied to the Dunhuang murals spectral imaging and was evaluated. The results showed that the optimal optic filter set could result in promising improvement both in spectral and color accuracy when compared with the production camera. In addition, it can be used for the construction of Dunhuang murals spectral image database. © 2015 Wiley Periodicals, Inc. Col Res Appl, 41, 585–595, 2016     

Separation of Organic Dyes from Wastewater by Using Colloidal Gas Aphrons

Abstract

Auxiliary chemicals used in the preparation of water-based dyes have been reported to pose problems in conventional wastewater treatment processes. The dye manufacturing industries have to find alternate wastewater treatment processes to remove dyes from their waste effluents. This paper investigates a novel method of separation of dyes by flotation using colloidal gas aphrons (CGAs). The results indicate that this is an effective method for the separation of synthetic dyes from wastewater. The mechanism of removal has been shown to be ion coupling of the oppositely charged species of the surfactant forming the CGA and the dye and flotation of the ion-dye complex on the surface of CGA microbubbles.