Study on reversible hydrogen uptake and release of 1,2-dimethylindole as a new liquid organic hydrogen carrier

Indole derivatives have been considered as promising liquid organic hydrogen carriers (LOHCs) for onboard hydrogen storage applications. Here a new member of indole family, 1,2-dimethylindole (1,2-DMID), was reported as a potential liquid organic hydrogen carrier with a hydrogen storage content of 5.23 wt%, a meting point of 55 °C and a boiling point of 260 °C. Full hydrogenation and dehydrogenation of 1,2-DMID can be achieved with fast kinetics under mild conditions. The hydrogenation of 1,2-DMID followed the first order kinetics with an apparent activation energy of 85.1 kJ/mol. Dehydrogenation of fully hydrogenated product, octahydro-1,2-DMID was conducted over 5 wt% Pd/Al₂O₃ at 170–200 °C. The stored hydrogen can be completely released at 180 °C in 3 h and at 200 °C in 1 h. The energy barrier of dehydrogenation of octahydro-1,2-DMID was calculated to be 111.9 kJ/mol 3 times cycles of hydrogenation and dehydrogenation were employed to test the recycle ability of 1,2-DMID. The structures of intermediates were also discussed by means of Material Studio calculations.     

Two-dimensional Mo2C: An efficient promoter for hydrogen storage and release from a liquid organic hydrogen carrier

Two-dimensional Mo₂C (2D-Mo₂C) is reported for the first time as an effective promoter of a Pt/Al₂O₃ catalyst for both the hydrogenation and dehydrogenation of the liquid organic hydrogen carrier (LOHC) pair, dibenzyltoluene (DBT) and perhydro-dibenzyltoluene (H18-DBT), respectively. Addition of 6.2 wt% 2D-Mo₂C to a Pt/Al₂O₃ catalyst resulted in a significant increase in both the degree of hydrogenation and dehydrogenation compared to the unpromoted catalyst. An analysis of the initial (120 min) perhydro-DBT dehydrogenation kinetics in the temperature range of 270–330 °C, resulted in a reduction in apparent activation energy from 119.5 ± 3.8 kJ/mol for the Pt/Al₂O₃ catalyst to 110.4 ± 5.6 kJ/mol for the 6.2 wt% 2D-Mo₂C/Pt/Al₂O₃ catalyst. The 6.2 wt% 2D-Mo₂C/Pt/Al₂O₃ catalyst was also more stable than the unpromoted catalyst over several consecutive cycles of hydrogenation and dehydrogenation. Catalyst characterization showed that addition of 2D-Mo₂C resulted in an increase in particle size and electron density of the Pt, which enhanced both the hydrogenation and dehydrogenation reactions, despite the fact that the 2D-Mo₂C alone was inactive for both reactions.     

A YH3 promoted palladium catalyst for reversible hydrogen storage of N-ethylcarbazole

N-ethylcarbazole (NEC) is a promising liquid organic hydrogen carrier, while sluggish kinetics of hydrogen absorption and desorption restrict its application. To overcome that, a YH₃ promoted palladium catalyst Pd/Al₂O₃-YH₃ is developed in this work by taking advantage of the fast reversible hydrogenation and dehydrogenation kinetics of YH₃. With the Pd/Al₂O₃-YH₃, NEC can reversibly store 5.5 wt% hydrogen in 4 h below 473 K. The performance is the best compared to that of all the reported catalysts for both hydrogen absorption and desorption. Moreover, there are no gaseous impurities produced and no performance decay during three hydrogen storage cycles. The excellent performance derives from the intrinsic high catalytic activity of Pd/Al₂O₃ and the promoting effect of YH₃ by providing a new hydrogen transfer path, making NEC more attractive for practical application.     

Simultaneous dehydrogenation of 1,4- butanediol to γ-butyrolactone and hydrogenation of benzaldehyde to benzyl alcohol mediated over competent CeO2–Al2O3 supported Cu as catalyst

Hydrogen being a dynamically impending energy transporter is widely used in hydrogenation reactions for the synthesis of various value added chemicals. It can be obtained from dehydrogenation reactions and the acquired hydrogen molecule can directly be utilized in hydrogenation reactions. This correspondingly avoids external pumping of hydrogen making it an economical process. We have for the first time tried to carryout 1,4-butanediol dehydrogenation and benzaldehyde hydrogenation simultaneously over ceria-alumina supported copper (Cu/CeO₂–Al₂O₃) catalyst. In this concern, 10 wt% of Cu supported on CeO₂–Al₂O₃ (3:1 ratio) was synthesized using wet impregnation method. The synthesized catalyst was then characterized by various analytical methods such as BET, powder XRD, FE-SEM, H₂-TPR, NH₃ and CO₂-TPD, FT-IR and TGA. The catalytic activity towards simultaneous 1,4-butanediol dehydrogenation and benzaldehyde hydrogenation along with their individual reactions was tested for temperature range of 240 °C–300 °C. The physicochemical properties enhanced the catalytic activity as clearly interpreted from the results obtained from the respective characterization data. The best results were obtained with 10 wt% of Cu supported on CeO₂–Al₂O₃ (3:1 ratio) catalyst with benzaldehyde conversion of 34% and 84% selectivity of benzyl alcohol. The conversion of 1,4-butanediol was seen to be 90% with around 95% selectivity of γ-butyrolactone. The catalyst also featured physicochemical properties namely increased surface area, higher dispersion and its highly basic nature, for the simultaneous reaction towards a positive direction. In terms of permanence, the Cu/CeO₂–Al₂O₃ (10CCA) catalyst was quite steady and showed stable activity up to 24 h in time on stream profile.     

7-ethylindole: A new efficient liquid organic hydrogen carrier with fast kinetics

We report a discovery of a new member of the liquid organic hydrogen carrier (LOHC) family, 7-ethylindole (7-EID), with a low melting point of ?14 °C and a decent hydrogen content of 5.23 wt%. Hydrogenation of the compound was carried out over a commercial 5 wt% Ru/Al₂O₃ catalyst in the H₂ pressure range of 5–8 MPa and a temperature range of 120–160 °C, respectively. It was found that the hydrogenation rate positively correlates with the reaction temperature. However, the rate was barely effected by the H₂ pressure if the pressure exceeds 6 MPa. The estimated apparent activation energy of 7-EID hydrogenation is 51.5 kJ/mol. The fully hydrogenated product, octahydro-7-ethylindole (8H-7-EID), was used as the reactant for the dehydrogenation reaction at 170–200 °C over a 5 wt% Pd/Al₂O₃ catalyst. Full dehydrogenation of 8H-7-EID to 7-EID can be achieved within 270 min at 190 °C. The apparent activation energy of 8H-7-EID dehydrogenation was calculated to be 101.9 kJ/mol at 170–200 °C. The liberated H₂ was found to be of high purity, which meets the requirement of proton exchange membrane fuel cells.     

High active pd@mil-101 catalyst for dehydrogenation of liquid organic hydrogen carrier

Highly dispersed Pd nanoparticles immobilized in MIL-101 (Pd@MIL-101) were prepared and used for the catalytic dehydrogenation of Liquid organic hydrogen carriers (LOHC). The as-synthesized catalysts were characterized and it was found that 3 wt% of Pd@MIL-101 embodied smaller and highly dispersed Pd NPs. The catalytic activities of as-synthesized catalysts were investigated by the dehydrogenation of a representative LOHC compound, perhydro-N-propylcarbazole (12H-NPCZ). The results indicated that 3 wt% Pd@MIL-101 catalyst exhibited good catalytic activity and good reusability for the dehydrogenation of 12H-NPCZ, which is superior to that of commercial 5 wt% Pd/Al₂O₃ catalyst. This study demonstrates that Pd@MIL-101 is a promising dehydrogenation catalyst for the application of LOHC technology.     

Remarkable activity of Pd catalyst supported on alumina synthesized via a hydrothermal route for hydrogen release of perhydro-N-propylcarbazole

The investigation of dehydrogenation catalysts to achieve rapidly hydrogen release of Liquid Organic Hydrogen Carriers (LOHCs) are of crucial importance for large-scale applications. The catalyst supports with bulk surface area and decent acid-base nature is a key parameter for catalyst to improve its catalytic performance as well as reduce precious metal dosage. Herein, alumina was chosen as a support for Pd loading and prepared through hydrothermal route at different temperatures. The morphology and surface acid property of the alumina supports were investigated in detail. The results revealed that the hydrothermal temperature had a closely effect on the morphology, surface acidity and specific surface area of alumina, resulting in a further impact on Pd dispersion and particle size associated tightly with catalytic activity of Pd/Al₂O₃. The catalyst with 1 wt% Pd loaded on alumina carrier prepared via hydrothermal treatment at 120 °C showed the best catalytic performance for dehydrogenation of perhydro-N-propylcarbazole (12H-NPCZ). Full dehydrogenation with 100% conversion to N-propylcarbazole (NPCZ) could be achieved after 360 min at 180 °C and 101 kPa, which is higher than that of commercial 5 wt% Pd/Al₂O₃ catalyst. The catalyst has potential commercial application value in large-scale application of LOHC technology.     

The effects of alumina morphology and Pt electron property on reversible hydrogenation and dehydrogenation of dibenzyltoluene as a liquid organic hydrogen carrier

The morphologies and the electron property of catalysts play the very important roles in the hydrogenation and dehydrogenation of liquid organic hydrogen carriers (LOHCs) such as dibenzyltoluene (DBT). The different morphologies and pore structures of γ-Al₂O₃ and Mo_xC doped γ-Al₂O₃ were synthesized as the supports for Pt catalysts. After analyzing of various characterizations and catalytic testing, it was found that the large surface area and the mesoporous structure of catalysts are beneficial to both DBT hydrogenation and perhydro-dibenzyltoluene (H18-DBT) dehydrogenation. The doping of Mo_xC promoted the formation of the smaller Pt nanoparticles and increased Pt dispersion. The forming Pt–Mo structure is beneficial to hydrogen spillover which suppress the formation of by-product. The high Pt dispersion of 0.1 wt% Mo_xC doped Pt/Al₂O₃ catalyst plays the positive roles in increasing H18-DBT dehydrogenation activity.     

Dehydrogenation of methylcyclohexane over Pt/V2O5 and Pt/Y2O3 for hydrogen delivery applications

Dehydrogenation of methylcyclohexane (MCH) for hydrogen transportation and delivery application was carried out over 3 wt% Pt/V₂O₅ and 3 wt% Pt/Y₂O₃ catalyst. The catalytic activity was tested using a spray-pulse mode of reactor. Effective dehydrogenation of MCH under spray-pulse mode of reactant injection was observed. In terms of hydrogen evolution rate at 60 min from start of reaction the activity of 958 mmol/g/min was obtained at temperature of 350 °C. Nearly 100% selectivity toward hydrogen was obtained. A relatively high conversion of 98% was observed with 3 wt% Pt/Y₂O₃ at 60 min using an advanced spray-pulse reactor system. The catalysts were characterized using x-ray diffraction pattern (XRD), CO-chemisorption metal analysis, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) analysis.     

Integration of hydrogenation and dehydrogenation based on dibenzyltoluene as liquid organic hydrogen energy carrier

The heat transfer oil dibenzyltoluene (DBT) offered an intriguing approach for the scattered storage of renewable excess energy as a novel Liquid Organic Hydrogen Carrier (LOHC). The integration of hydrogenation and dehydrogenation in H0-DBT/H18-DBT pairs demonstrated that the feasibility of hydrogenation and dehydrogenation reaction conducted in one reactor with the same catalyst, which would be proposed to simplify the hydrogen storage process. The optimal reaction temperature based on the inhibition of ring opening and cracking was investigated combined with the ¹H NMR analysis. Meanwhile, the ideal catalyst 3 wt% Pt/Al₂O₃ for high hydrogen storage efficiency was screened out. Cycle tests of hydrogenation and dehydrogenation integration reaction had shown that the hydrogen storage efficiency was 84.6% after five cycle tests. The integration of hydrogenation and dehydrogenation reaction based on DBT exhibited the ideal thermal stability, which demonstrated its potential as a reversible H₂ carrier.     

Facilitating de/hydrogenation by long-period stacking ordered structure in Mg based alloys

We propose a simple strategy to effectively improve the hydrogenation and dehydrogenation kinetics of Mg based hydrogen storage alloys. We designed and prepared an Mg_91.9Ni_4.3Y_3.8 alloy consisting of a large quantity of long-period stacking ordered (LPSO) phases. A type of highly dispersed multiphase nanostructure, which can markedly promote the de/hydrogenation kinetics, has been obtained utilizing the decomposition of LPSO phases at first a few of hydrogenation reactions. The fine structures of LPSO phases and the microstructural evolutions of the alloy during hydrogenation and dehydrogenation reactions were in detail characterized by means of transmission electron microscopy (TEM). The LPSO phases transformed to MgH₂, Mg₂NiH₄, and YH₃ after the first hydrogenation. The highly dispersed nanostructure at macro and micro (nano) scale range remains even after several de/hydrogenation cycles. The alloy shows excellent hydrogen storage properties and its reversible hydrogen absorption/desorption capacities are about 5.8 wt% at 300 °C. Particularly, the alloy exhibits very fast dehydrogenation kinetics. The dehydrogenated sample can release approximately 5 wt% hydrogen at 300 °C within 200 s and 5.5 wt% within 600 s. We elucidate the structural mechanism of the alloy with outstanding hydrogen storage performance.     

Reversible hydrogen storage in a 3NaBH4/YF3 composite

A 3NaBH₄/YF₃ hydrogen storage composite was prepared through ball milling and its hydrogen sorption properties were investigated. It is shown that NaBH₄ does not react with YF₃ during ball milling. The dehydrogenation of the composite starts at 423 °C, which is about 100 °C lower than the dehydrogenation temperature of pure NaBH₄, with a mass loss of 4.12 wt%. Pressure–Composition–Temperature tests reveal that the composite has reversible hydrogen sorption performance in the temperature range from 350 °C to 413 °C and under quite low hydrogenation plateau pressures (<1 MPa). Its maximum hydrogen storage capacity can reach up to 3.52 wt%. The dehydrogenated composite can absorb 3.2 wt% of hydrogen within 5 min at 400 °C. Based on the Pressure–Composition–Temperature analyses, the hydrogenation enthalpy of the composite is determined to be −46.05 kJ/mol H₂, while the dehydrogenation enthalpy is 176.76 kJ/mol H₂. The mechanism of reversible hydrogen sorption in the composite involves the decomposition and regeneration of NaBH₄ through the reaction with YF₃. Therefore, the addition of the YF₃ to NaBH₄ as a reagent forms a reversible hydrogen storage composite.     

Rehydrogenation and cycle studies of LiBH4–CaH2 composite

Rehydrogenation behavior of 6LiBH₄ + CaH₂ composite with NbF₅ has been studied between 350 and 500 °C after dehydrogenation at 450 °C. The composite exhibits the best rehydrogenation feature at 450 °C in terms of the overall rehydrogenation rate and the amount of absorbed hydrogen. It is found that about 9 wt% hydrogen is absorbed at 450 °C for 12 h. Up to 10 dehydrogenation–hydrogenation cycles have been carried out for the composite. It is demonstrated that 6LiBH₄ + CaH₂ with 15 wt% NbF₅ maintains a reversible hydrogen storage capacity of about 6 wt% at 450 °C after a slight degradation between the 1st and 5th cycles. The addition of NbF₅ seems to improve the cycle properties by retarding microstructural coarsening during cycles.     

Evaluation of catalyst activity for release of hydrogen from liquid organic hydrogen carriers

This contribution investigate the effect of parameters for production of hydrogen by catalytic dehydrogenation of perhydrodibenzyltoluene (H18-DBT). The sensitivity of the dehydrogenation reaction to temperature (290–320 °C) is justified by an increase in degree of dehydrogenation (DoD) from 40 to 90% when using 1 wt % Pt/Al₂O₃ catalyst. However, the increase in temperature increases the hydrogen production rate and decreases the hydrogen purity by increasing the formation of by-products. In addition, the DoD of 96% is obtained when 2 wt % Pt/Al₂O₃ is used at 320 °C. The DoD obtained for Pd, Pt, and Pt–Pd catalysts is 11, 82 and 6%, respectively. Therefore, Pd is not a metal of choice for dehydrogenation of H18-DBT, in both monometallic and bimetallic system. The ab-initio density functional theory (DFT) calculations are consistent with this observation. Furthermore, dehydrogenation of H18-DBT followed 1st order reaction kinetics and the activation energies for 1 wt % Pt/Al₂O₃, 1 wt % Pd/Al₂O₃ and 1:1 wt % Pt–Pd/Al₂O₃ catalysts are: 205, 84 and 66 kJ/mol, respectively.     

Hydrogen absorption–desorption mechanisms for the ball-milled Li3N–MgH2 (1:1) mixture

The Li–Mg–N–H system is a very promising hydrogen storage material due to its high capacity, reversibility and moderate operating conditions. In this work, the LiMgN/2LiH was directly synthesized by ball-milling the mixture of Li₃N–MgH₂ at 1:1 molar ratio by a reaction of Li₃N + MgH₂ → LiMgN + 2LiH. The hydrogenation/dehydrogenation properties of the as-prepared LiMgN/2LiH were investigated by a Sieverts'-type apparatus. The mixture of LiMgN/2LiH started to absorb hydrogen at 130 °C, and 2.2 wt%, 3.2 wt% hydrogen were absorbed under a pressure of 5 MPa and 10 MPa, respectively. Powder X-ray Diffraction (XRD) and Fourier Transform Infrared (FTIR) spectrometer measurements were used to identify the phase characterizations of the products during the hydrogen absorption–desorption process. The reaction mechanism during the hydrogenation/dehydrogenation process for the Li₃N–MgH₂ system is discussed.     

A highly adaptable Ni catalyst for Liquid Organic Hydrogen Carriers hydrogenation

Reducing the cost of hydrogenation/dehydrogenation catalysts and improving the catalytic activity are essential steps to promote the commercial application of Liquid Organic Hydrogen Carriers (LOHCs) technology. We reported a series of highly adaptable 70 wt% Ni supported catalysts prepared by a facile co-precipitation method. The as-prepared catalysts were used in the hydrogenation of several promising LOHCs candidates, including benzene, N-propylcarbazole, N-ethylcarbazole and dibenzyltoluene. By adjusting the ratio of Al and Si, the Ni₇₀/AlSiO-1/1 catalyst with Al and Si in a molar ratio of 1:1 presents highest catalytic activity for hydrogenation of the above LOHCs, indicating the catalyst is highly adaptable for different LOHCs. The characterization results proved that the presence of SiO₂ could significantly weaken the interaction between metal and carrier and decrease the formation of NiAl₂O₄ species, which is beneficial to the reducibility of Ni. The introduced Al₂O₃ can inhibit the agglomeration of Ni and increase the dispersion of the metal. Besides, the Ni₇₀/AlSiO-1/1 catalyst was used to hydrogenate N-propylcarbazole by 5 cycles. In the fifth cycle, the hydrogen uptake reached the theoretical hydrogenation storage within 1.5 h, which suggested the excellent stability of the catalyst. Because of its low cost, high efficiency, high adaptation and highly stable, the self-made Ni catalyst has potential prospect in large-scale LOHCs application.     

Wet-impregnated bimetallic Pd-Ni catalysts with enhanced activity for dehydrogenation of perhydro-N-propylcarbazole

Palladium/platinum-based catalysts are widely used in the dehydrogenation process of Liquid Organic Hydrogen Carriers (LOHCs). The cost of noble metal has become a main drawback for LOHCs large-scale application. Partial replacement of Pd/Pt by other transition metals can be an effective solution. In this paper, we synthesize the bimetallic Pd–Ni catalyst by incipient wet impregnation and the catalytic dehydrogenation performance of perhydro-N-propylcarbazole (12H-NPCZ) as a LOHC candidate. Ni and Pd were impregnated on mesoporous alumina to obtain both monometallic and bimetallic catalysts, i.e. Pd/Al₂O₃, Ni/Al₂O₃ and Pd–Ni/Al₂O₃ (Pd:Ni = 1:1) with total metal loading of 5 wt%, respectively. The above catalysts were characterized by N₂-adsorption/desorption, H₂-temperature programmed reduction, X-Ray diffraction, X-Ray photoelectron spectroscopy, Inductively coupled plasma - optical emission spectrometer, CO pulse adsorption and Transmission electron microscopy. The catalytic dehydrogenation results indicated that the bimetallic Pd–Ni/Al₂O₃ showed best catalytic activity, followed by Pd/Al₂O₃, commercial Pd/Al₂O₃ and Ni/Al₂O₃. Notably, the catalytic activity of bimetallic was well maintained after 5 cycles at 200 °C with no degradation, indicating this bimetallic catalyst has potential prospect for large-scale application.     

Co-effects of Tm2O3 and porous silica on reversible hydrogen storage in NaAlH4

The co-effects of lanthanide oxide Tm₂O₃ and porous silica on the hydrogen storage properties of sodium alanate are investigated. NaAlH₄-Tm₂O₃ (10 wt%) and NaAlH₄-Tm₂O₃ (10 wt%)-porous SiO₂ (10 wt%) are prepared by the ball milling method, and their hydrogen desorption/re-absorption capacities are compared. Dehydrogenation process was performed at 150 °C under vacuum and rehydrogenation was performed at 150 °C for 4 h under ∼9 MPa in highly pure hydrogen. The results show that Tm₂O₃ has a catalytic effect on the hydrogen desorption and re-absorption of NaAlH₄. The hydrogen desorption capacity of Tm₂O₃ single-doped NaAlH₄ is 4.6 wt%, higher than that of undoped NaAlH₄ (4.3 wt%). During the dehydrogenation process, NaAlH₄ is completely decomposed and no intermediate product Na₃AlH₆ is detected. The addition of porous silica improves the dehydrogenation performance of NaAlH₄. Tm₂O₃ and porous silica co-doped NaAlH₄ could release a maximum hydrogen amount of 4.7 wt%, higher than that of undoped NaAlH₄ and Tm₂O₃ single-doped NaAlH₄. Moreover, porous silica improves the reversibility of hydrogen storage in NaAlH₄.     

Enhancement of the H2 desorption properties of LiAlH4 doping with NiCo2O4 nanorods

Lithium aluminum hydride (LiAlH₄) is considered as an attractive candidate for hydrogen storage owing to its favorable thermodynamics and high hydrogen storage capacity. However, its reaction kinetics and thermodynamics have to be improved for the practical application. In our present work, we have systematically investigated the effect of NiCo₂O₄ (NCO) additive on the dehydrogenation properties and microstructure refinement in LiAlH₄. The dehydrogenation kinetics of LiAlH₄ can be significantly increased with the increase of NiCo₂O₄ content and dehydrogenation temperature. The 2 mol% NiCo₂O₄-doped LiAlH₄ (2% NCO–LiAlH₄) exhibits the superior dehydrogenation performances, which releases 4.95 wt% H₂ at 130 °C and 6.47 wt% H₂ at 150 °C within 150 min. In contrast, the undoped LiAlH₄ sample just releases <1 wt% H₂ after 150 min. About 3.7 wt.% of hydrogen can be released from 2% NCO–LiAlH₄ at 90 °C, where total 7.10 wt% of hydrogen is released at 150 °C. Moreover, 2% NCO–LiAlH₄ displayed remarkably reduced activation energy for the dehydrogenation of LiAlH₄.     

Enhanced hydrogen storage properties of TiN–LiAlH4 composite

The hydrogen storage properties of LiAlH₄ doped efficient TiN catalyst were systematically investigated. We observe that TiN catalyst enhances the dehydrogenation kinetics and decreases the dehydrogenation temperature of LiAlH₄. The dehydrogenation behaviors of 2%TiN–LiAlH₄ are investigated using temperature programmed desorption (TPD), differential scanning calorimetry (DSC) and fourier transform infrared spectroscopy (FTIR). Interestingly, the onset hydrogen desorption temperature of 2%TiN–LiAlH₄ sample gets lowered from 151.0 °C to 90.0 °C with a faster kinetics, and the dehydrogenation rate reached a maximum value at 137.2 °C. By adding a small amount of as-prepared TiN, approximately 7.1 wt% of hydrogen can be released from the LiAlH₄ at 130 °C. Interestingly, the result of the FTIR indicates that the 2%TiN–LiAlH₄ maybe restore hydrogen under 5.5 MPa hydrogen. Moreover, 2%TiN–LiAlH₄ displayed a substantially reduced activation energy for LiAlH₄ dehydrogenation.