Dark fermentative hydrogen production from xylose by a hot spring enrichment culture

Dark fermentative hydrogen production by a hot spring culture was studied from different sugars in batch assays and from xylose in continuous stirred tank reactor (CSTR) with on-line pH control. Batch assays yielded hydrogen in following order: xylose > arabinose > ribose > glucose. The highest hydrogen yield in batch assays was 0.71 mol H₂/mol xylose. In CSTR the highest H₂ yield and production rate at 45 °C were 1.97 mol H₂/mol xylose and 7.3 mmol H₂/h/L, respectively, and at 37 °C, 1.18 mol H₂/mol xylose and 1.7 mmol H₂/h/L, respectively. At 45 °C, microbial community consisted of only two bacterial strains affiliated to Clostridium acetobutulyticum and Citrobacter freundii, whereas at 37 °C six Clostridial species were detected. In summary hydrogen yield by hot spring culture was higher with pentoses than hexoses. The highest H₂ production rate and yield and thus, the most efficient hydrogen producing bacteria were obtained at suboptimal temperature of 45 °C for both mesophiles and thermophiles.     

Bioreactor for glycerol conversion into H2 by bacterium Enterobacter aerogenes

Glycerol was used as a substrate for H₂ production by bacterium Enterobacter aerogenes in the test tubes and bioreactor. A BioFlo/CelliGen 115 bioreactor (10 L working volume) was utilized to conduct the experiments for conversion of glycerol into H₂ by E. aerogenes cells. The highest H₂ production rate was observed under 2% glycerol in the culture medium. The glycerol uptake efficiency by bacteria in the bioreactor was found to be 65% during the 6 day period, matching glycerol uptake efficiency observed in the test tubes experiment (65%).Hydrogen production from glycerol (2% glycerol, v/v) by E. aerogenes in the bioreactor and test tubes was measured over the 6 days, showing the maximal H₂ rate at 650 mL g⁻¹ dry weight h⁻¹. The yield of H₂ production from glycerol at 0.89 mol/mol in the bioreactor was high, corresponding to the theoretical yield of 1 mol of H₂ per 1 mol of glycerol.     

Impact of regulated pH on proto scale hydrogen production from xylose by an alkaline tolerant novel bacterial strain, Enterobacter cloacae DT-1

A hydrogen producing facultative anaerobic alkaline tolerant novel bacterial strain was isolated from crude oil contaminated soil and identified as Enterobacter cloacae DT-1 based on 16S rRNA gene sequence analysis. DT-1 strain could utilize various carbon sources; glycerol, CMCellulose, glucose and xylose, which demonstrates that DT-1 has potential for hydrogen generation from renewable wastes. Batch fermentative studies were carried out for optimization of pH and Fe²⁺ concentration. DT-1 could generate hydrogen at wide range of pH (5–10) at 37 °C. Optimum pH was; 8, at which maximum hydrogen was obtained from glucose (32 mmol/L), when used as substrate in BSH medium containing 5 mg/L Fe²⁺ ion. Decrease in hydrogen partial pressure by lowering the total pressure in the fermenter head space, enhanced the hydrogen production performance of DT-1 from 32 mmol H₂/L to 42 mmol H₂/L from glucose and from 19 mmol H₂/L to 33 mmol H₂/L from xylose. Hydrogen yield efficiency (HY) of DT-1 from glucose and xylose was 1.4 mol H₂/mol glucose and 2.2 mol H₂/mol xylose, respectively. Scale up of batch fermentative hydrogen production in proto scale (20 L working volume) at regulated pH, enhanced the HY efficiency of DT-1 from 2.2 to 2.8 mol H₂/mol xylose (1.27 fold increase in HY from laboratory scale). 84% of maximum theoretical possible HY efficiency from xylose was achieved by DT-1. Acetate and ethanol were the major metabolites generated during hydrogen production.     

Enhancement of fermentative hydrogen production from green algal biomass of Thermotoga neapolitana by various pretreatment methods

Biomass of the green algae has been recently an attractive feedstock source for bio-fuel production because the algal carbohydrates can be derived from atmospheric CO₂ and their harvesting methods are simple. We utilized the accumulated starch in the green alga Chlamydomonas reinhardtii as the sole substrate for fermentative hydrogen (H₂) production by the hyperthermophilic eubacterium Thermotoga neapolitana. Because of possessing amylase activity, the bacterium could directly ferment H₂ from algal starch with H₂ yield of 1.8–2.2 mol H₂/mol glucose and the total accumulated H₂ level from 43 to 49% (v/v) of the gas headspace in the closed culture bottle depending on various algal cell-wall disruption methods concluding sonication or methanol exposure. Attempting to enhance the H₂ production, two pretreatment methods using the heat-HCl treatment and enzymatic hydrolysis were applied on algal biomass before using it as substrate for H₂ fermentation. Cultivation with starch pretreated by 1.5% HCl at 121 °C for 20 min showed the total accumulative H₂ yield of 58% (v/v). In other approach, enzymatic digestion of starch by thermostable α-amylase (Termamyl) applied in the SHF process significantly enhanced the H₂ productivity of the bacterium to 64% (v/v) of total accumulated H₂ level and a H₂ yield of 2.5 mol H₂/mol glucose. Our results demonstrated that direct H₂ fermentation from algal biomass is more desirably potential because one bacterial cultivation step was required that meets the cost-savings, environmental friendly and simplicity of H₂ production.     

Enhancement in hydrogen production by co-cultures of Bacillus and Enterobacter

Defined co-cultures of hydrogen (H₂) producers belonging to Citrobacter, Enterobacter, Klebsiella and Bacillus were used for enhancing the efficiency of biological H₂ production. Out of 11 co-cultures consisting of 2–4 strains, two co-cultures composed of Bacillus cereus EGU43, Enterobacter cloacae HPC123, and Klebsiella sp. HPC793 resulted in H₂ yield up to 3.0 mol mol⁻¹ of glucose. Up-scaling of the reactor by 16-fold resulted in a corresponding increase in H₂ production with an actual evolution of 7.44 L of H₂. It constituted 58.2% of the total biogas. Continuous culture evolution of H₂ by co-cultures (B. cereus EGU43 and E. cloacae HPC123) immobilized on ligno-cellulosic materials resulted in 6.4-fold improvement in H₂ yield compared to free floating bacteria. This synergistic influence of B. cereus and E. cloacae can offer a better strategy for H₂ production than undefined or mixed cultures.     

The kinetic characterization of photofermentative bacterium Rhodopseudomonas faecalis RLD-53 and its application for enhancing continuous hydrogen production

In this work, the kinetic characterization of hydrogen production by the photofermentative bacteria Rhodopseudomonas faecalis RLD-53 was investigated at different growth phase. During entire fermentation, 89.30% of total biomass was accumulated in exponential growth phase, while hydrogen yield was only 1.82 mol H₂/mol acetate at the expense of 51.25% substrate. In the stationary phase, biomass synthesis was minimal (7.51%), and 38.17% of the substrate was directly converted into hydrogen. As a result, hydrogen (59.19%) was mainly produced in stationary phase with highest hydrogen yield of 3.67 mol H₂/mol acetate. Consequently, bacteria in stationary phase were most effective for hydrogen production. Based on these findings, a novel membrane photobioreactor was developed to retain bacteria during stationary phase in reactor through membrane separation. Maximum rate (32.82 ml/l/h) and yield (3.27 mol H₂/mol acetate) of hydrogen production were achieved using membrane photobioreactor under the continuous operation. Therefore, using bacteria in stationary phase as hydrogen producer can offer considerable benefits for enhancing photo-hydrogen production.     

Single stage photofermentative hydrogen production from glucose: An attractive alternative to two stage photofermentation or co-culture approaches

Photosynthetic bacteria have been extensively investigated for biohydrogen production due to their high intrinsic substrate conversion efficiency. Many studies have examined different aspects of photo fermentative hydrogen production using various volatile organic fatty acids under nitrogen limited conditions, and in some cases nearly stoichiometric hydrogen yields have been obtained. In addition, there has been great interest in using photosynthetic bacteria to increase the yields of dark fermentation of glucose through either two stage or co-culture approaches. Although these processes can achieve yields of about 7 mol of H₂ per mole of glucose, there have many drawbacks. Thus, we have begun the systematic investigation of a simple one stage system for the conversion of glucose to hydrogen through photofermentation by Rhodobacter capsulatus. Yields of about 3 mol of H₂ per moles of glucose have been obtained, which represents a yield of 25% yield. Thus improvement is needed and can be sought through a variety of means, including. process optimization and gene inactivation. These approaches could allow the development of a single stage process for the complete stoichiometric conversion of glucose, or glucose containing wastes, to hydrogen with a minimal lag phase and relative insensitivity to inhibition by fixed nitrogen. This would present an attractive simple alternative to either two stage or co-culture fermentations for the complete conversion of carbohydrate substrates to hydrogen.     

Improvement of hydrogen production under decreased partial pressure by newly isolated alkaline tolerant anaerobe, Clostridium butyricum TM-9A: Optimization of process parameters

A mesophilic alkaline tolerant fermentative microbe was isolated from estuarine sediment samples and designated as Clostridium butyricum TM-9A, based on 16S rRNA gene sequence. Batch experiments were conducted for investigation of TM-9A strain for its growth and hydrogen productivity from glucose, in an iron containing basal solution supplemented with yeast extract as organic nitrogen source. Hydrogen production started to evolve when cell growth entered exponential phase and reached maximum production rate at late exponential phase. Maximum hydrogen production was observed at 37 °C, initial pH of 8.0 in the presence of 1% glucose. Optimization of process parameters resulted in increase in hydrogen yield from 1.64 to 2.67 mol of H₂/mol glucose. Molar yield of H₂ increased further from 2.67 to 3.1 mol of H₂/mol of glucose with the decrease in hydrogen partial pressure, obtained by lowering the total pressure in the head space of the batch reactor. Acetate and butyrate were the measure volatile fatty acids generated during hydrogen fermentation. TM-9A strain produced hydrogen efficiently from a range of pentose and hexose sugars including di-, tri and poly-saccharides like; xylose, ribose, glucose, rhamnose, galactose, fructose, mannose, sucrose, arabinose, raffinose, cellulose, cellobiose and starch.     

Statistical optimization of biohydrogen production from sucrose by a co-culture of Clostridium acidisoli and Rhodobacter sphaeroides

Statistically based experimental designs were applied to optimize the fermentation process parameters for hydrogen (H₂) production by co-culture of Clostridium acidisoli and Rhodobacter sphaeroides with sucrose as substrate. An initial screening using the Plackett–Burman design identified three factors that significantly influenced H₂ yield: sucrose concentration, initial pH, and inoculum ratio. These factors were considered to have simultaneous and interdependent effects. A central composite design and response surface analysis were adopted to further investigate the mutual interactions among the factors and to identify the values that maximized H₂ production. The optimal substrate concentration, initial pH, and inoculum ratio of C. acidisoli to R. sphaeroides were 11.43 g/L sucrose, 7.13, and 0.83, respectively. Using these optimal culture conditions, substrate conversion efficiency was determined as 10.16 mol H₂/mol sucrose (5.08 mol H₂/mol hexose), which was near the expected value of 10.70 mol H₂/mol sucrose (5.35 mol H₂/mol hexose).     

Revivability of fermentative hydrogen producing bioreactors

In this study we investigated the revivability of a continuous biological hydrogen producing reactor after a period of feed interruption. Before the feed interruption, the hydrogen production yield was 1.36 mol H₂/mol glucose with butyric acid and acetic acid as the main metabolic products. However, after feed interruption, butyric acid formation completely stopped and the hydrogen yield decreased to 0.29 mol H₂/mol glucose. Lactic acid, ethanol and acetic acid became the main metabolites after re-start up. Reduction of organic loading rate together with increasing the pH after the feed interruption resulted in an increase in the hydrogen yield to 0.7 mol H₂/mol glucose. The microbial community dynamics showed complete elimination of Clostridium affiliated strains and predominance of Lactobacillus affiliated strains after the re-start up of the reactor.     

Phytosynthesized iron oxide nanoparticles and ferrous iron on fermentative hydrogen production using Enterobacter cloacae: Evaluation and comparison of the effects

The effects of FeSO₄ and synthesized iron oxide nanoparticles (0–250 mg/L) on fermentative hydrogen production from glucose and sucrose, using Enterobacter cloacae were investigated, to find out the enhancement of efficiency. The maximum hydrogen yields of 1.7 ± 0.017 mol H₂/mol glucose and 5.19 ± 0.12 mol H₂/mol sucrose were obtained with 25 mg/L of ferrous iron supplementation. In comparison, the maximum hydrogen yields of 2.07 ± 0.07 mol H₂/mol glucose and 5.44 ± 0.27 mol H₂/mol sucrose were achieved with 125 mg/L and 200 mg/L of iron oxide nanoparticles, respectively. These results indicate that the enhancement of hydrogen production on the supplementation of iron oxide nanoparticles was found to be considerably higher than that of ferrous iron supplementation. The activity of E. cloacae in a glucose and sucrose fed systems was increased by the addition of iron oxide nanoparticles, but the metabolic pathway was not changed. The results revealed that the glucose and sucrose fed systems conformed to the acetate/butyrate fermentation type.     

Effect of pH on glucose and starch fermentation in batch and sequenced-batch mode with a recently isolated strain of hydrogen-producing Clostridium butyricum CWBI1009

This paper reports investigations carried out to determine the optimum culture conditions for the production of hydrogen with a recently isolated strain Clostridium butyricum CWBI1009. The production rates and yields were investigated at 30 °C in a 2.3 L bioreactor operated in batch and sequenced-batch mode using glucose and starch as substrates. In order to study the precise effect of a stable pH on hydrogen production, and the metabolite pathway involved, cultures were conducted with pH controlled at different levels ranging from 4.7 to 7.3 (maximum range of 0.15 pH unit around the pH level). For glucose the maximum yield (1.7 mol H₂ mol⁻¹ glucose) was measured when the pH was maintained at 5.2. The acetate and butyrate yields were 0.35 mol acetate mol⁻¹ glucose and 0.6 mol butyrate mol⁻¹ glucose. For starch a maximum yield of 2.0 mol H₂ mol⁻¹ hexose, and a maximum production rate of 15 mol H₂ mol⁻¹ hexose h⁻¹ were obtained at pH 5.6 when the acetate and butyrate yields were 0.47 mol acetate mol⁻¹ hexose and 0.67 mol butyrate mol⁻¹ hexose.     

Dark fermentative hydrogen production with crude glycerol from biodiesel industry using indigenous hydrogen-producing bacteria

Glycerol is an inevitable by-product from biodiesel synthesis process and could be a promising feedstock for fermentative hydrogen production. In this study, the feasibility of using crude glycerol from biodiesel industry for biohydrogen production was evaluated using seven isolated hydrogen-producing bacterial strains (Clostridium butyricum, Clostridium pasteurianum, and Klebsiella sp.). Among the strains examined, C. pasteurianum CH4 exhibited the best biohydrogen-producing performance under the optimal conditions of: temperature, 35 °C; initial pH, 7.0; agitation rate, 200 rpm; glycerol concentration, 10 g/l. When using pure glycerol as carbon source for continuous hydrogen fermentation, the average H₂ production rate and H₂ yield were 103.1 ± 8.1 ml/h/l and 0.50 ± 0.02 mol H₂/mol glycerol, respectively. In contrast, when using crude glycerol as the carbon source, the H₂ production rate and H₂ yield was improved to 166.0 ± 8.7 ml/h/l and 0.77 ± 0.05 mol H₂/mol glycerol, respectively. This work demonstrated the high potential of using biodiesel by-product, glycerol, for cost-effective biohydrogen production.     

Biological hydrogen production by extremely thermophilic novel bacterium Thermoanaerobacter mathranii A3N isolated from oil producing well

Hydrogen producing novel bacterial strain was isolated from formation water from oil producing well. It was identified as Thermoanaerobacter mathranii A3N by 16S rRNA gene sequencing. Hydrogen production by novel strain was pH and substrate dependent and favored pH 8.0 for starch, pH 7.5 for xylose and sucrose, pH 8.0–9.0 for glucose fermentation at 70 °C. The highest H₂ yield was 2.64 ± 0.40 mol H₂ mol glucose at 10 g/L, 5.36 ± 0.41 mol H₂ mol – sucrose at 10 g/L, 17.91 ± 0.16 mmol H₂ g – starch at 5 g/L and 2.09 ± 0.21 mol H₂ mol xylose at 5 g/L. The maximum specific hydrogen production rates 6.29 (starch), 9.34 (sucrose), 5.76 (xylose) and 4.89 (glucose) mmol/g cell/h. Acetate-type fermentation pathway (approximately 97%) was found to be dominant in strain A3N, whereas butyrate formation was found in sucrose and xylose fermentation. Lactate production increased with high xylose concentrations above 10 g/L.     

Extreme-thermophilic biohydrogen production by an anaerobic heat treated digested sewage sludge culture

Biohydrogen production process from glucose using extreme-thermophilic H₂-producing bacteria enriched from digested sewage sludge was investigated for five cycles of repeated batch experiment at 70 °C. Heat shock pretreatment was used for preparation of hydrogen-producing bacteria comparing to an untreated anaerobic digested sludge for their hydrogen production performance and responsible microbial community structures. The results showed that the heat shock pretreatment completely repressed methanogenic activity and gave the maximum hydrogen production yield of 355-488 ml H₂/g COD in the second cycle of repeated batch cultivation with more stable gas production during the cultivation when compared with control. Hydrogen production was accompanied by production of acetic acid. The average specific hydrogen in five cycles experiment ranged from 150 to 200 ml H₂/g VSS. PCR-DGGE profiling showed that the extreme-thermophilic culture predominant species were closely affiliated to Thermoanaerobacter pseudethanolicus.     

Statistical optimization of fermentative hydrogen production from xylose by newly isolated Enterobacter sp. CN1

Statistical experimental designs were applied for the optimization of medium constituents for hydrogen production from xylose by newly isolated Enterobacter sp. CN1. Using Plackett–Burman design, xylose, FeSO₄ and peptone were identified as significant variables which highly influenced hydrogen production. The path of steepest ascent was undertaken to approach the optimal region of the three significant factors. These variables were subsequently optimized using Box–Behnken design of response surface methodology (RSM). The optimum conditions were found to be xylose 16.15 g/L, FeSO₄ 250.17 mg/L, peptone 2.54 g/L. Hydrogen production at these optimum conditions was 1149.9 ± 65 ml H₂/L medium. Under different carbon sources condition, the cumulative hydrogen volume were 1217 ml H₂/L xylose medium, 1102 ml H₂/L glucose medium and 977 ml H₂/L sucrose medium; the maximum hydrogen yield were 2.0 ± 0.05 mol H₂/mol xylose, 0.64 mol H₂/mol glucose. Fermentative hydrogen production from xylose by Enterobacter sp. CN1 was superior to glucose and sucrose.     

Enhanced hydrogen production from xylose and bamboo stalk hydrolysate by overexpression of xylulokinase and xylose isomerase in Klebsiella oxytoca HP1

Biofuels production from lignocellulose hydrolysates by microbe fermentation has merited attention because of the mild reaction conditions involved and the clean nature of the process. In this work, xylulokinase (XK) and xylose isomerase (XI) were overexpressed in Klebsiella oxytoca HP1 to enhance hydrogen production by the fermentation of xylose. The recombinant strains exhibited higher enzyme activity of XI or XK compared with the wild strain. Hydrogen production from pure xylose, xylose/glucose mixtures and bamboo stalk hydrolysate was significantly enhanced with the overexpression of XI and XK in K. oxytoca HP1 in terms of total hydrogen yield (THY), hydrogen yield per mole substrate (HYPM) and hydrogen production rate (HPR). The HYPM of K. oxytoca HP1/xylB and K. oxytoca HP1/xylA reached 1.93 ± 0.05 and 2.46 ± 0.05 mol H₂/mol xylose, respectively in pure xylose, while the value for the wild strain was 1.68 ± 0.04 mol H₂/mol xylose. The xylose consumption rate (XCR) for the recombinant strain was significantly higher than that for the wild strain, particularly in the early stage of fermentation. Relative to the wild type, hydrogen yield (HY) from 1 g of preprocessed bamboo powder of HP1/xylB and HP1/xylA increased by 33.04 and 41.31%, respectively. It was concluded that overexpression of XK or XI was able to promote hydrogen production from xylose and xylose/glucose mixtures by simultaneously increasing the utilization efficiency of xylose and weakening the inhibitory effect of glucose on xylose use. In addition, the results indicated that overexpression technology was an effective way to further increase hydrogen production from lignocellulosic hydrolysates.     

Effect of changing temperature on anaerobic hydrogen production and microbial community composition in an open-mixed culture bioreactor

The temperature effect (37–65 °C) on H₂ production from glucose in an open-mixed culture bioreactor using an enrichment culture from a hot spring was studied. The dynamics of microbial communities was investigated by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE). At 45 and 60 °C the H₂ production was the highest i.e. 1.71 and 0.85 mol H₂/mol glucose, respectively. No H₂ was produced at temperatures 50 and 55 °C. At 37–45 °C, H₂ production was produced by butyrate type fermentation while fermentation mechanism changed to ethanol type at 60 °C. Clostridium species were dominant at 37–45 °C while at 50–55 °C and 60 °C the culture was dominated by Bacillus coagulans and Thermoanaerobacterium, respectively. In the presence of B. Coagulans the metabolism was directed to lactate production. The results show that the mixed culture had two optima for H₂ production and that the microbial communities and metabolic patterns promptly changed according to changing temperatures.     

Hydrogen production performance by Enterobacter cloacae KBH3 isolated from termite guts

Two out of six bacterial isolates obtained from the guts of Globitermes sp. termites were identified as hydrogen-producing bacteria. One isolate, Enterobacter cloacae KBH3, was characterised using the BIOLOG identification system and 16S rRNA gene analysis. In a batch fermentation study to evaluate its growth in defined medium, E. cloacae KBH3 produced 154 ml H₂ per litre medium with approximately 50% hydrogen content. The carbon utilisation results suggest that E. cloacae KBH3 have the potential to be a good hydrogen producer. This strain is also able to produce hydrogen within a wide range of temperatures (28–40 °C) and pH (4.5–8). In several fermentation runs, the pH of the culture dropped from 6.5 to 5.36 within the first 3 h, which was mostly due to the biosynthesis of formate. An increase of cumulative hydrogen production was recorded as well as a decrease in the concentration of formate, indicating the importance of the formate pathway for hydrogen production. The highest rate of hydrogen production of 180.74 ml H₂/l/h was achieved when lactate and acetate were at their highest concentrations. Most of the hydrogen gas was produced during the exponential growth phase, and the biogas continued to be produced during the stationary phase. The specific growth rate was calculated to be 0.224 per hour while the hydrogen yield was 1.8 mol of hydrogen per mol of glucose. At the end of the batch study, the highest cumulative hydrogen production was 2404 ml H₂ per litre of fermentation medium.     

Improvement of fermentative biohydrogen production by Clostridium butyricum CWBI1009 in sequenced-batch,horizontal fixed bed and biodisc-like anaerobic reactors with biomass retention

A horizontal tubular fixed bed bioreactor (HFBR) and an anaerobic biodisc-like reactor (AnBDR) were designed to both fix Clostridium biomass and enable rapid transfer of the hydrogen produced to gas phase in order to decrease the strong effect of H₂ partial pressure and H₂ supersaturation on the performances of Clostridium strains. The highest H₂ production rate (703 mL H₂/L h) and yield (302 mL/g glucose consumed i.e. 2.4 mol/mol) with the pure culture were recorded in the AnBDR with 300 mL culture medium (total volume 2.3 L) at pH 5.2 and a glucose loading rate of 2.87 g/L h. These results are about 2.3 and 1.3-fold higher than those achieved in the same bioreactor with 500 mL liquid medium and with the same glucose consumption rate. Therefore, our experimentations and a short review of the literature reported in this paper emphasize the relevance of performing bioreactors with high L/G transfer.