Influence of multiple oxide (Cr2O3/Nb2O5) addition on the sorption kinetics of MgH2

The influence of multiple additions of two oxides, Cr₂O₃ and Nb₂O₅, as additives on the hydrogen sorption kinetics of MgH₂ after milling was investigated. We found that the desorption kinetics of MgH₂ were improved more by multiple oxide addition than by single addition. Even for the milled MgH₂ micrometric size powders, the high hydrogen capacity with fast kinetics were achieved for the powders after addition of 0.2 mol% Cr₂O₃ + 1 mol% Nb₂O₅. For this composition, the hydride desorbed about 5 wt.% hydrogen within 20 min and absorbed about 6 wt.% in 5 min at 300 °C. Furthermore, the desorption temperature was decreased by 100 °C, compared to MgH₂ without any oxide addition, and the activation energy for the hydrogen desorption was estimated to be about 185 kJ mol⁻¹, while that for MgH₂ without oxide was about 206 kJ mol⁻¹.     

Effects of NbF5 addition on the hydrogen storage properties of LiAlH4

We investigated the effects of NbF₅ addition by ball milling on the hydrogen storage properties of LiAlH₄. Pressure-composition-temperature (PCT) experiments showed that addition of 0.5 and 1 mol% NbF₅ in LiAlH₄ improves the onset desorption temperature and results in little decrease in hydrogen capacity, with approximately 7.0 wt% released by 188 °C. Isothermal dehydriding kinetics measurements indicated that the NbF₅-doped sample shows an average dehydrogenation rate 5–6 times faster than that of the as-received LiAlH₄ sample. In the x-ray diffraction results, there are distinct peaks of Al and LiH that appear after desorption. There is no peak of NbF₅ before or after desorption. Desorption kinetics measurements indicated that the activation energy, E_A, for LiAlH₄ + 1 mol% NbF₅ is about 67 kJ/mol for first reaction stage and about 77 kJ/mol for second reaction stage. The desorption process was further characterised by differential scanning calorimetry, and the possible mechanism of the effects of NbF₅ addition is discussed.     

Synergetic effect of Ni and Nb2O5 on dehydrogenation properties of nanostructured MgH2 synthesized by high-energy mechanical alloying

Nanostructured MgH₂-Ni/Nb₂O₅ nanocomposite was synthesized by high-energy mechanical alloying. The effect of MgH₂ structure, i.e. crystallite size and lattice strain, and the presence of 0.5 mol% Ni and Nb₂O₅ on the hydrogen-desorption kinetics was investigated. It is shown that the dehydrogenation temperature of MgH₂ decreases from 426 °C to 327 °C after 4 h mechanical alloying. Here, the average crystallite size and accumulated lattice strain are 20 nm and 0.9%, respectively. Further improvement in the hydrogen desorption is attained in the presence of Ni and Nb₂O₅, i.e. the dehydrogenation temperature of MgH₂/Ni and MgH₂/Nb₂O₅ is measured to be 230 °C and 220 °C, respectively. Meanwhile, the dehydrogenation starts at 200 °C in MgH₂–Ni/Nb₂O₅ system, revealing synergetic effect of Ni and Nb₂O₅. The mechanism of the catalytic effect is presented.     

Catalytic mechanism of Nb2O5 and NbF5 on the dehydriding property of Mg95Ni5 prepared by hydriding combustion synthesis and mechanical milling

The catalytic mechanism of Nb₂O₅ and NbF₅ on the dehydriding property of Mg₉₅Ni₅ prepared by hydriding combustion synthesis and mechanical milling (HCS + MM) was studied. It was shown that NbF₅ was more efficient than Nb₂O₅ in improving the dehydriding property. In particular, the dehydriding temperature onset decreases from 460 K for Mg₉₅Ni₅ to 450 K for Mg₉₅Ni₅with 2.0 at.% Nb₂O₅, whereas it decreases to 410 K for that with 2.0 at.% NbF₅. By means of X-ray diffraction and X-ray photoelectron spectroscopy, it was confirmed that the interaction between the Nb ions and the H atoms and that between the anions (O²⁻ or F⁻) and Mg²⁺ existed in Mg₉₅Ni₅ doped with Nb₂O₅ or NbF_5. Further, the pressure–concentration-isotherms analysis clarified that these interactions destabilized the Mg–H bonding, and that NbF₅ had a better effect on the destabilization of the Mg–H bonding than Nb₂O₅ contributing to the better dehydriding property of (Mg₉₅Ni₅)2.0−NbF₅.     

Effect of Nb2O5 on MgH2 properties during mechanical milling

Recently, it was shown that hydrogen absorption–desorption kinetics in magnesium were improved by milling magnesium hydride (MgH₂) with transition metal oxides. Herein, we investigate the role of the most effective of these oxides, Nb₂O₅ when added in larger volume fraction. The effect of Nb₂O₅ on magnesium crystalline structure, particle size and (ab)desorption properties has been characterised. Moreover, we report that pure MgH₂ can also show fast hydrogen sorption kinetics after a long milling time. The effects of Nb₂O₅ on MgH₂ sorption properties are rationalised in a new approach considering Nb₂O₅ as a dispersing agent, which helps reduce MgH₂ particle size during milling.     

Influence of metal oxide on LiBH4/2LiNH2/MgH2 system for hydrogen storage properties

In this study, various nanoscale metal oxide catalysts, such as CeO₂, TiO₂, Fe₂O₃, Co₃O₄, and SiO₂, were added to the LiBH₄/2LiNH₂/MgH₂ system by using high-energy ball milling. Temperature programmed desorption and MS results showed that the Li–Mg–B–N–H/oxide mixtures were able to dehydrogenate at much lower temperatures. The order of the catalytic effect of the studied oxides was Fe₂O₃ > Co₃O₄ > CeO₂ > TiO₂ > SiO₂. The onset dehydrogenation temperature was below 70 °C for the samples doped with Fe₂O₃ and Co₃O₄ with 10 wt.%. More than 5.4 wt.% hydrogen was released at 140 °C. X-ray diffraction indicated that the addition of metal oxides inhibited the formation of Mg(NH₂)₂ during ball milling processes. It is thought that the changing of the ball milling products results from the interaction of oxide ions in metal oxide catalysts with hydrogen atoms in MgH₂. The catalytic effect depends on the activation capability of oxygen species in metal oxides on hydrogen atoms in hydrides.     

Combined effects of hydrogen back-pressure and NbF5 addition on the dehydrogenation and rehydrogenation kinetics of the LiBH4–MgH2 composite system

It is well known that the dehydrogenation pathway of the LiBH₄–MgH₂ composite system is highly reliant on whether decomposition is performed under vacuum or a hydrogen back-pressure. In this work, the effects of hydrogen back-pressure and NbF₅ addition on the dehydrogenation kinetics of the LiBH₄–MgH₂ system are studied under either vacuum or hydrogen back-pressure, as well as the subsequent rehydrogenation and cycling. For the pristine sample, faster desorption kinetics was obtained under vacuum, but the performance is compromised by slow absorption kinetics. In contrast, hydrogen back-pressure remarkably promotes the absorption kinetics and increases the reversible hydrogen storage capacity, but with the penalty of much slower desorption kinetics. These drawbacks were overcome after doping with NbF₅, with which the dehydrogenation and rehydrogenation kinetics was significantly improved. In particular, the enhanced kinetics was observed to persist well, even after 9 cycles, in the case of the NbF₅ doped sample under hydrogen back-pressure, as well as the suppression of forming Li₂B₁₂H₁₂. Furthermore, the mechanism that is behind these effects of NbF₅ additive on the reversible dehydrogenation reaction of the LiBH₄–MgH₂ system is discussed.     

The synthesis of nanoscopic Ti based alloys and their effects on the MgH2 system compared with the MgH2 + 0.01Nb2O5 benchmark

The MgH₂ + 0.02Ti-additive system (additives = 35 nm Ti, 50 nm TiB₂, 40 nm TiC, <5 nm TiN, 10 × 40 nm TiO₂) has been studied by high-resolution synchrotron X-ray diffraction, after planetary milling and hydrogen (H) cycling. TiB₂ and TiN nanoparticles were synthesised mechanochemically whilst other additives were commercially available. The absorption kinetics and temperature programmed desorption (TPD) profiles have been determined, and compared to the benchmark system MgH₂ + 0.01Nb₂O₅ (20 nm). TiC and TiN retain their structures after milling and H cycling. The TiB₂ reflections appear compressed in d-spacing, suggesting Mg/Ti exchange has occurred in the TiB₂ structure. TiO₂ is reduced, commensurate with the formation of MgO, however, the Ti is not evident anywhere in the diffraction pattern. The 35 nm Ti initially forms an fcc Mg_47.5Ti_52.5 phase during milling, which then phase separates and hydrides to TiH₂ and MgH₂. At 300 °C, the MgH₂ + 0.02 (Ti, TiB₂, TiC, TiN, TiO₂) samples display equivalent absorption kinetics, which are slightly faster than the MgH₂ + 0.01Nb₂O₅ (20 nm) benchmark. All samples are contaminated with MgO from the use of a ZrO₂ vial, and display rapid absorption to ca. 90% of capacity within 20 s at 300 °C. TPD profiles of all samples show peak decreases compared to the pure MgH₂ milled sample, with many peak profiles displaying bi-modal splitting. TPD measurements on two separate instruments demonstrate that on a 30 min milling time scale, all samples are highly inhomogenous, and samplings from the exact same batch of milled MgH₂ + 0.02Ti-additive can display differences in TPD profiles of up to 30 °C in peak maxima. The most efficient Ti based additive cannot be discerned on this basis, and milling times ? 30 min are necessary to obtain homogenous samples, which may lead to artefactual benefits, such as reduction in diffusion distances by powder grinding or formation of dense microstructure. For the hydrogen cycled MgH₂ + 0.01Nb₂O₅ system, we observe a face centred cubic Mg/Nb exchanged Mg_0.165Nb_0.835O phase, which accounts for ca. 60% of the originally added Nb atoms.     

Rehydrogenation performance of an MgH2–Nb2O5 system modified by heptane and acetone

An MgH₂ + 1 mol% Nb₂O₅ system was modified by heptane and acetone through a high-energy ball milling process, and their rehydrogenation performances were investigated. XRD results indicated that except MgH₂ and Nb₂O₅ phases Mg and MgO phases existed after ball milling. The rehydrogenation results showed that after modification by heptane the capacity increased from 3.0 wt% and 4.2 wt% to 5.0 wt% and 5.5 wt% within 110 s at 523 K and 573 K, respectively. The hydriding rate increased from 0.08 wt%/s after 20 s to 0.22 wt%/s after 10 s at 523 K. However, after modification by acetone it only absorbed 1.8 wt% and 2.0 wt% of hydrogen even within 8000 s at 523 K and 573 K, respectively. Rietveld refinement results indicated that after modification by the heptane the content of MgO was reduced from 6.8 wt% to 4.2 wt%, while after the modification by the acetone the content of MgO was significantly increased from 6.8 wt% to 23.8 wt%. The difference in the rehydrogenation performance was believed to be attributed to the different contents of the MgO phase, which led to the difference in the contents of the MgH₂ phase. It implied that the heptane acted as a solvent without oxygen element in it to prevent the MgH₂ + Nb₂O₅ system from aggregation, crystallization and oxidation. It suggested heptane was suitable for the improvement of the rehydrogenation performance of MgH₂ system.     

Effect of additive distribution in H2 absorption and desorption kinetics in MgH2 milled with NbH0.9 or NbF5

This paper presents a comparative study of H₂ absorption and desorption in MgH₂ milled with NbF₅ or NbH_0.9. The addition of NbF₅ or NbH_0.9 greatly improves hydriding and dehydriding kinetics. After 80 h of milling the mixture of MgH₂ with 7 mol.% of NbF₅ absorbs 60% of its hydrogen capacity at 250 °C in 30 s, whereas the mixture with 7 mol.% of NbH_0.9 takes up 48%, and MgH₂ milled without additive only absorbs 2%. At the same temperature, hydrogen desorption in the mixture with NbF₅ finishes in 10 min, whereas the mixture with NbH_0.9 only desorbs 50% of its hydrogen content, and MgH₂ without additive practically does not releases hydrogen. The kinetic improvement is attributed to NbH_0.9, a phase observed in the hydrogen cycled MgH₂ + NbF₅ and MgH₂ + NbH_0.9 materials, either hydrided or dehydrided. The better kinetic performance of the NbF₅-added material is attributed to the combination of smaller size and enhanced distribution of NbH_0.9 with more favorable microstructural characteristics. The addition of NbF₅ also produces the formation of Mg(H_xF_1-x)₂ solid solutions that limit the practically achievable hydrogen storage capacity of the material. These undesired effects are discussed.     

Effect of LiH on hydrogen storage property of MgH2

Recent works showed that the addition of LiBH₄ significantly improves the sorption kinetics of MgH₂, and LiH decomposed from LiBH₄ was supposed to play the catalytic effect on MgH₂. In order to clarify this mechanism, the effect of LiH on the hydriding/dehydriding kinetics and thermodynamics of MgH₂ was systematically investigated. The hydrogenation kinetics of LiH-doped samples, as well as the morphology after several cycles, was similar to those of pure MgH₂, which indicate that Li⁺ had no catalytic effect on the hydrogenation of Mg. Moreover, the addition of LiH strongly retarded the hydrogen desorption of MgH₂ doped with/without Nb₂O₅, and resulted in higher starting temperature of desorption, larger activation energy and larger pressure hysteresis of PCI curves of MgH₂. H₂, HD and D₂ were observed in the desorption products of MgH₂-2LiD, which confirms that H–H exchange indeed occurs between MgH₂ and LiH, hence deteriorate desorption kinetics/thermodynamics of MgH_2. The results implied that the additives containing H⁻ could retard the hydrogen desorption of MgH₂ by H–H exchange effect.     

Microstructural evolution of NbF5-doped MgH2 exhibiting fast hydrogen sorption kinetics

The microstructure of MgH₂ with 1 mol% NbF₅, prepared by high-energy ball milling (HEBM), was studied using high resolution transmission electron microscopy (HR-TEM) with an X-ray energy dispersive spectrometer (EDS) before and after hydrogen sorption cycles. The TEM samples were prepared without any air exposure by a novel, focused ion beam (FIB) system specially designed for highly air sensitive materials. During HEBM, the doping agent, NbF₅, was distributed as an extremely thin, film-like, amorphous phase along the grain boundaries of the nanocrystalline MgH₂. After 10 sorption cycles, amorphous Nb-F phase was transformed into crystalline Nb hydrides. It is believed that the Nb hydride played a decisive role in improving the sorption kinetics of MgH₂.     

Thermal stability of Vale Inco nanonometric nickel as a catalytic additive for magnesium hydride (MgH2)

The structure stability of nanometric-Ni (n-Ni) produced by Vale Inco Ltd. Canada as a catalytic additive for MgH₂ has been investigated. Each n-Ni filament is composed of nearly spherical interconnected particles having a mean diameter of 42 ± 16 nm. After ball milling of the MgH₂ + 5 wt.%n-Ni mixture for 15 min the n-Ni particles are found to be uniformly embedded within the particles of MgH₂ and at their surfaces. Neither during ball milling of the MgH₂ + 5 wt.%n-Ni mixture nor its first decomposition at temperatures of 300, 325, 350 and 375 ^°C the elemental n-Ni reacts with the elemental Mg to form the Mg₂Ni intermetallic phase (and eventually the Mg₂NiH₄ hydride). The n-Ni additive acts as a strong catalyst accelerating the kinetics of desorption. From the Arrhenius and Johnson–Mehl–Avrami–Kolmogorov theory the activation energy for the first desorption is determined to be ∼94 kJ/mol. After cycling at 300 ^°C the activation energy for desorption is determined to be ∼99 kJ/mol. This is much lower than ∼160 kJ/mol observed for the undoped and ball milled MgH₂. During cycling at 275 and 300 ^°C the n-Ni additive is converted into Mg₂Ni (Mg₂NiH₄). The newly formed Mg₂NiH₄ has a nanosized grain on the order of 20 nm. Its catalytic potency seems to be similar to its n-Ni precursor. The formation of Mg₂Ni (Mg₂NiH₄) may be one of the factors responsible for the systematic decrease of hydrogen capacity observed upon cycling at 275 and 300 ^°C.     

A study of the ZrF4, NbF5, TaF5, and TiCl3 influences on the MgH2 sorption properties

Magnesium hydride with 7 wt.% of various metal halide additives (ZrF₄, TaF₅, NbF₅ and TiCl₃) were ball milled, and the influence of these dopants on the kinetics of absorption and desorption was studied. The pressure-composition-temperature isotherms (P-C-T) measured by Sieverts’ apparatus did not show thermodynamic changes in the studied materials. Moreover, XPS studies demonstrated that the metal halides used in this study (except ZrF₄) took part in the partial and full disproportionation reactions directly after milling and the first desorption/absorption cycle. The catalytic effect of metal halides on the Mg hydrogenation/dehydrogenation process was caused by the formation of pure transition metal and/or the MgF₂ phase, which led to the influence of two simultaneous factors on the sorption properties of the MgH₂.     

Hydrogen sorption kinetics of MgH2 catalyzed with titanium compounds

Identification of effective catalyst is a subject of great interest in developing MgH₂ system as a potential hydrogen storage medium. In this work, the effects of typical titanium compounds (TiF₃, TiCl₃, TiO₂, TiN and TiH₂) on MgH₂ were systematically investigated with regard to hydrogen sorption kinetics. Among them, adding TiF₃ leads to the most pronounced improvement on both absorption and desorption rates. Comparative studies indicate that the TiH₂ and MgF₂ phases in situ introduced by TiF₃ fail to explain the superior catalytic activity. However, a positive interaction between TiH₂ and MgF₂ is observed. Detailed comparison between the effect of TiF₃ and TiCl₃ additive suggests the catalytic role of F anion. XPS examination reveals that new bonding state(s) of F anion is formed in the MgH₂ + TiF₃ system. On the basis of these results, we propose that the substantial participation of F anion in the catalytic function contributes to the superior activity of TiF₃.     

Hydrogen storage properties of nanostructured MgH2/TiH2 composite prepared by ball milling under high hydrogen pressure

Nanostructured MgH₂/0.1TiH₂ composite was synthesized directly from Mg and Ti metal by ball milling under an initial hydrogen pressure of 30 MPa. The synthesized composite shows interesting hydrogen storage properties. The desorption temperature is more than 100 °C lower compared to commercial MgH₂ from TG-DSC measurements. After desorption, the composite sample absorbs hydrogen at 100 °C to a capacity of 4 mass% in 4 h and may even absorb hydrogen at 40 °C. The improved properties are due to the catalyst and nanostructure introduced during high pressure ball milling. From the PCI results at 269, 280, 289 and 301 °C, the enthalpy change and entropy change during the desorption can be determined according to the van’t Hoff equation. The values for the MgH₂/0.1TiH₂ nano-composite system are 77.4 kJ mol⁻¹ H₂ and 137.5 J K⁻¹ mol⁻¹ H₂, respectively. These values are in agreement with those obtained for a commercial MgH₂ system measured under the same conditions. Nanostructure and catalyst may greatly improve the kinetics, but do not change the thermodynamics of the materials.     

Synthesis of catalytically active rock salt structured MgxNb1−xO nanoparticles for MgH2 system

This communication deals with the ex-situ synthesis of rock salt type Mg_xNb_1−xO whose structural characteristics are closely related with MgO. XRD examination of 30 h ball milled MgH₂ + Nb₂O₅ confirms the formation of a rock salt product Mg_xNb_1−xO_, which is comparable to the recently reported active catalyst Mg_xNb_1−xO formed in-situ in MgH₂ milled with 8 mol.% Nb₂O₅. It is shown that MgH₂ catalyzed with the pre-made 2 wt.% Mg_xNb_1−xO desorbs hydrogen at least 50 °C lower than the in-situ 2 wt.% Nb₂O₅ catalyzed MgH₂ with improved reversible absorption. This result highlights that the proposed pathway mechanism on the basis of Nb₂O₅ catalyst may need further verification and that the addition of the Mg_xNb_1−xO catalyst in a pre-reduced state can offer distinct performance advantages over its in-situ preparation.     

Sorption properties of NaBH4/MH2 (M = Mg,Ti) powder systems

The sorption properties of NaBH₄/MH₂ (M = Mg, Ti) powder systems prepared by high-energy ball milling have been thoroughly investigated. Concerning the systems containing MgH₂, the 2:1 and 1:2 molar compositions have been studied and both lead to a multi-step desorption pathway, where the formation of MgB₂ confirms the destabilization of NaBH₄ induced by the presence of MgH₂. A noticeable kinetic enhancement is achieved for the MgH₂-rich system (composition 1:2) if compared with the NaBH₄-rich system (composition 2:1). Even though full re-absorption is obtained for neither of the two compositions, fast kinetics is achieved. During absorption, the unsuspected formation of the perovskite-type hydride NaMgH₃ is detected and it is showed that this ternary phase contributes to reduce the gravimetric capacity of the systems. Conversely, in the 2NaBH₄/TiH₂ system, there is no formation of the intermetallic compound TiB₂. Furthermore, a decrease in the sorption kinetics is found in comparison with the systems based on MgH₂.     

Electronic structure and stability of new FCC magnesium hydrides Mg7MH16 and Mg6MH16 (M = Ti,V, Nb): An ab initio study

MgH₂ is one of the most promising materials for hydrogen storage. However, its rather slow hydrogen absorption and desorption kinetics and high dissociation temperature essentially limit its application in this field. Nevertheless mixing Mg or MgH₂ with small amount of transition metals or their oxides remarkably accelerates the hydrogen kinetics. Recently a series of new hydrides Mg₇TiH_x, Mg_6.5NbH_x and Mg₆VH_x of Ca₇Ge type structure has been synthesized. The hydrogen desorption properties have been found to be better than for pure MgH₂. Here, we report on the results of our theoretical study of the electronic structure of these new hydrides carried out within the framework of the full-potential, self-consistent linearized augmented plane-wave method. We use these results, along with calculations of the heat of formation and relative stability, to discuss the bonding of these materials and their hydrogen-storage properties.     

Hydrogen sorption performance of MgH2 doped with mesoporous nickel- and cobalt-based oxides

The effect of mesoporous Co₃O₄, NiCo₂O₄ and NiO on the hydrogen sorption performance of MgH₂ was investigated. These oxides were synthesized by multi-step nanocasting and introduced during the high-energy ball milling of MgH₂ powder to act as catalysts. Hydrogen desorption on the as-milled powders was assessed upon heating the samples from room temperature to 400 °C. In all cases, the onset temperature for desorption was lowered by taking advantage of the introduced additives. The NiO-doped sample displayed the best response, the desorption rate being 7 times faster than in pure MgH₂. Complementary kinetic studies on this particular sample revealed that the sorption activation energies were much lower (50 kJ/mol for absorption and 335 kJ/mol for desorption) than the corresponding ones for undoped MgH₂ (57 kJ/mol for absorption and 345 kJ/mol for desorption), thus proving the catalytic activity of the mesoporous NiO oxide. Significantly, the X-ray powder diffraction (XRPD) patterns taken on the NiO-doped sample after discharging/charging cycles revealed that Mg could fully hydrogenate at the end of the charging process, while Mg metal was still detected in the undoped (pure) sample. Favored conditions for dissociative chemisorption of hydrogen could be ascribed to the formation of metallic Ni arising from complete or partial reduction of NiO, as observed in the XRPD patterns.