The dark side of dioxygen biochemistry

The aim of this study was to evaluate the clinical function and long-term prognosis of overdentures retained by a small number of implants in the maxilla and mandible using one of two different attachment systems. Included in the study were all patients referred to specialty clinics in J?nk?ping and Link?ping, Sweden, during the treatment period who needed an overdenture and could be provided with a minimum number of two bilaterally-placed implants. Excluded were patients with bone-grafted jaws, irradiated cancer patients, heavy bruxers, and patients who had lost a fixed prosthesis because of implant losses. The patients were randomly assigned to receive one retentive system, either a round 2-mm-diameter bar with clips or ball attachments (Nobel Biocare). Eighteen overdentures were placed in maxillae and 32 in mandibles, supported by a total of 115 Br?nemark implants. Of the implants placed, 86.1% were continuously osseointegrated. The cumulative implant survival rates after 7 years of loading were 75.4% in the maxillae and 100% in the mandibles. There was no difference in implant survival rate between the attachment systems. Patients with implant losses were characterized by severely resorbed maxillary ridges and inferior bone quality, together with unfavorable loading circumstances such as short implants combined with long leverages. Complications and prosthetic adjustments were mostly resolved early and easily.     

Survival of cylindrical implants in composite grafted maxillary sinuses

PURPOSE: This retrospective study investigated the survival of dental implants placed in the maxilla after composite grafting of the sinus and an average of 55 months of loading. PATIENTS AND METHODS: Maxillary sinuses of 88 patients were grafted with autogenous cancellous bone combined with dense hydroxyapatite particles. After an average healing period of 3.4 months, hydroxyapatite-coated titanium endosseous implants were placed. A total of 388 implants were placed in grafted sinus floors, and 82 were placed in onlay grafted nonsinus position in the canine region. The implants were loaded with overdentures and fixed bridges 4 months (mean) after implantation, with a follow-up for a mean of 55 months. RESULTS: The cumulative implant survival was calculated according to the Kaplan-Meier method. Implant survival from the time of loading was 89% in full reconstructed cases and 90% in partially edentulous cases. The overall cumulative implant survival rate, including the loss in the surgical stage, was 82%. CONCLUSION: Implant loss in composite grafted maxillae after 70 months of follow-up was similar to loss in nongrafted maxillae.     

A comparative study of osseointegration of titanium implants in autogenous and freeze-dried bone grafts

PURPOSE: This study was undertaken to compare the rate and degree of osseointegration of dental implants when placed into either autogenous corticocancellous chip or freeze-dried corticocancellous chip bone grafts. MATERIALS AND METHODS: The canine ilium was used as the model site. Thirty experimental and 15 control implants were placed in 15 dogs: autogenous versus freeze-dried corticocancellous chip bone grafts around the exposed implant surfaces. In addition to the placement of control implants, the apical portion of the grafted implants acted as their own control. The implants were harvested at 1, 2, and 3 months. The evaluation of the integration process was performed by means of light microscopy, microradiography, and histomorphometry. RESULTS: Using this model, the results indicate that at 1 month there was no statistical difference in the degree of osseointegration in the two bone grafts. At 2 months, there was a statistically greater degree of osseointegration noted in the autogenous corticocancellous chip sites than in the freeze-dried bone grafts. At 3 months, the degree of osseointegration in the two groups was 70% and 33%, respectively. At 3 months, there was virtually 100% integration with trabecular bone at the control implant sites. CONCLUSION: The results indicate that at 2 months postoperatively implants placed in an autogenous bone chip graft osseointegrate to a significantly greater degree than implants placed in a freeze-dried bone chip graft, and this difference remains at 3 months.     

Long-term evaluation of the use of coralline hydroxyapatite in orthognathic surgery

PURPOSE: This prospective study was designed to evaluate the long-term clinical and radiographic results of porous block hydroxyapatite (PBHA) used as a synthetic bone graft in orthognathic surgery and craniofacial augmentation. PATIENTS AND MATERIALS: A total of 245 consecutive patients were treated initially. Inclusion criteria for this study included a minimum clinical and radiographic follow-up of 5 years. In addition, all patients with known implant failures were included regardless of whether they met the study criteria. There were 111 patients that met the criteria for inclusion in this study. All patients had undergone orthognathic surgery with rigid fixation and had had inlay or onlay PBHA implants placed. Ninety-six percent of the implants were placed through an intraoral approach. Long-term postoperative radiographs were visually compared with immediate postoperative radiographs for implant position, stability, resorption, and other significant radiographic changes. The clinical examination evaluated for signs and symptoms of infection, wound dehiscence, implant exposure, implant displacement, changes in the overlying mucosa, and development of oronasal or oroantral fistulae. RESULTS: Four hundred seventy-one implants were placed: 403 in the maxilla, 44 in the mandible, and 24 in the periorbital region. There were 289 implants placed in direct communication with the maxillary sinus. The average follow-up time was 7.2 years (range, 5.0 to 10.3 years). Twenty-three implants (4.9%) were removed during the evaluation period. Lateral maxillary wall grafting had 95.7% success, with nine implants being lost in three patients. One chin implant was removed because of dissatisfaction with the aesthetics. Seven (14%) midpalatal implants used for maxillary expansion were lost, primarily because of exposure of the implant to the oral or nasal cavity at the time of surgery. When PBHA was used for alveolar cleft grafting, there was a 100% failure rate. CONCLUSION: The use of PBHA as a bone graft substitute in orthognathic surgery and for facial augmentation showed a high percentage of success and efficacy. However, adequate soft tissue coverage in the nasal floor and on the palate are paramount for success of midpalatal implants. PBHA should not be used for alveolar cleft grafting. Rigid fixation for inlay implants in the maxilla is important to provide stress shielding of the material and minimize micromovement during the initial healing phase.     

Implant reconstruction of the jaws and craniofacial skeleton

Full oral rehabilitation with a high degree of success is now possible with osseointegrated implants. Osseointegration is a direct connection between living bone and the titanium implant at the level of the light microscope. Osseointegrated implants are currently used to replace single teeth, support fixed bridges and stabilize full dentures. These implants can also be placed extraorally for attachment of facial prosthesis. The surgical technique used to place implants intraorally into jaws or facial skeleton is performed in two stages using a local anesthetic and/or conscious sedation. During stage I surgery, holes are placed into the jaw using a series of gradually larger diameter burs until the desired diameter and depth of the bony preparation is achieved. The implant is then placed. The implant must remain undisturbed for 4 months for osseointegration to take place. Stage II surgery is then required to remove the mucosa over the implant and place the transmucosal abutment. After 1-2 weeks of healing, the restorative dentist can take an impression and fabricate the prosthesis. On occasion, it is necessary to augment the height and width of the atrophic jaw with autogenous or allogeneic bone grafts prior to implant placement. Bone grafts are sometimes placed on the floor of the nose or the floor of the maxillary sinus. Guided tissue regeneration is a technique used to generate bone within bony defects adjacent to implants. With long-term rates of success (5 years) of 99% for implants placed in the mandible and 95% for those placed in the maxilla, reconstruction of the jaws and cranial facial skeleton with osseointegrated implants has become the treatment of choice.     

Long-term follow-up on hydroxylapatite-coated cylindrical dental implants: a comparison between developmental and recent periods

PURPOSE: To compare success rates for dental implants placed from 1985 through 1988 and from 1989 through 1991, and to investigate the factors associated with success or failure. PATIENTS AND METHODS: All hydroxylapatite-coated cylindrical implants placed from 1985 through 1991 were followed yearly. Lifetable survival analyses compared implant success for a "developmental period" from 1985 through 1988 (4 to 8 years follow-up) and a "recent period" from 1989 through 1991 (1 to 4 years follow-up). Reasons for success or failure, time from implant placement to removal related to failure reason, outcome after implant removal, and a morbidity analysis are included. RESULTS: The 7 to 8-year cumulative success rate for all implants placed in the developmental period (maxilla and mandible combined) was 86.5%; it was 84.2% for all maxillary implants and 87.5% for all mandibular implants. The cumulative success rate for all implants placed in the recent period was 97.5%; it was 97.5% for all maxillary implants and 97.6% for all mandibular implants. The difference between the two periods was statistically significant only for the anterior maxilla. Regression analysis on the interval success rates indicates that interval failure did not follow a linear relationship with time. The most common reasons associated with failure were lack of keratinized gingiva, poor oral hygiene, mechanical overload, and malposition. CONCLUSION: Comparison with previously reported cumulative success rates indicated learning curve experiences comparable with other implant systems. Improvements in hardware, surgical and prosthetic techniques, and patient selection have led to an improvement in success rates with the recent period implants.     

Ten-year results for Br?nemark implants immediately loaded with fixed prostheses at implant placement

This investigation was initiated to develop a method to provide patients with a fixed provisional prosthesis placed at the time of implant placement. Sixty-three standard 3.75-mm Nobel Biocare implants of varying lengths were placed into mandibular sites in 10 patients and followed for up to 10 years. Twenty-eight implants were immediately loaded at implant placement, providing support for fixed provisional prostheses, while 35 adjacent implants were allowed to heal submerged and stress-free. Following a 3-month healing period, the submerged implants were exposed and definitive reconstruction was accomplished. All 10 prostheses supported by 28 implants placed into immediate function at the time of implant placement were successful during the 3-month healing period. Of these 28 implants placed into immediate function, 4 ultimately failed. Of the 35 submerged implants, all are osseointegrated and in function to date. Life-table analysis demonstrates an overall 10-year survival rate of 93.4% for all implants. The 10-year life-table analysis of survival is 84.7% for immediately loaded implants and 100% for submerged implants. Statistical analysis of the submerged versus immediately loaded implants demonstrates failure rates for immediately loaded implants to be significantly higher (P = .022 by the log rank test). These data demonstrate that although mandibular implants can be successfully placed into immediate function in the short term to support fixed provisional prostheses, long-term prognosis is guarded for those implants placed into immediate function distal to the incisor region.     

Clinical evaluations of a porous-surfaced endosseous implant system

Clinical evaluations of a new porous-surfaced implant concept (Endopore) in a large population of fully and partially edentulous patients are reported, and a technique of spreading buccal and lingual plates with osteotomes to place these implants in proximity to the sinus of the posterior maxilla is described. Three-dimensional, interconnecting pores on this implant's bone interface surface give a great surface area for bone engagement. When the maxilla is prepared by this spreading procedure, these implants can be successfully placed in areas having limited available bone. Our success rates are 97.0% for implants stabilizing a mandibular overdenture and 94.8% for implants placed in partially edentulous patients. Many times, sinus lift or other augmentation procedures can be avoided in the maxilla and mandible, allowing for less patient morbidity and for an implant reconstruction that is more affordable for the patient.     

Histologic evaluation of the LaminOss osteocompressive dental screw: a pilot study

This animal study compared the response of canine mandibular bone using the orthopedic principle of osteocompression by the function of an immediately loaded dental implant vs an unloaded dental implant of the same design and size. Two dogs were partially edentulated in the mandible. A total of 8 osteocompressive screw implants, 2 per quadrant were placed and evaluated histomorphometrically after 3 days in 1 dog and after 3 months in the second dog. The second dog had a two-unit fixed bridge placed immediately postsurgically in occlusal function on the right side; on the left side, the implants were splinted out of occlusion as a control. Histologically, no bone necrosis was observed at the implant interface by any of the 8 implants for either period as a direct result of the 4-mm-diameter by 13-mm-length implant design. Clinical parameters did not differ among the implants; however, at 3 months, the immediately loaded implants demonstrated more than twice the amount of bone density at their surfaces compared to the unloaded implants of the same design. Future human clinical research would be necessary to provide a meaningful statistical analysis to validate the importance of this implant design and the function of osteocompression.     

A historical review of mental health services in Hong Kong (1841 to 1995)

OBJECTIVE: To review the experience of 1 microvascular surgeon during an 11-year period in performing 210 vascularized bone-containing free flaps for oromandibular reconstruction. DESIGN: Retrospective medical records review of patients who underwent primary and secondary oromandibular reconstruction with the use of vascularized bone free flaps. SETTING: Academic medical center. PATIENTS: A total of 201 patients underwent 210 composite free-flap reconstructions of the mandible for various disorders and with a range of bony and soft tissue defects. INTERVENTION: All patients underwent the microvascular transfer of vascularized bone flaps from the ilium, fibula, or scapula. In selected cases, 2 simultaneous free flaps were transferred to achieve an optimal bone and soft tissue reconstruction. Endosteal dental implants were used in 81 patients, with a total of 360 fixtures placed during these 11 years. MAIN OUTCOME MEASURES: The success of microvascular free tissue transfer, dental implant extrusion, and short- and long-term complications at the recipient and donor sites. RESULTS: Of the 210 mandibular reconstructions that were performed, 202 were successful in reestablishing mandibular continuity. Reexploration for vascular-related complications was done in 16 patients, 8 of whom were successfully treated, yielding an overall success rate of 96%. The overall success rate for endosteal dental implants was 92%. The implant success rate was 86% when the bone in which the fixtures were placed was irradiated postoperatively. The success rate was 64% in the 14 fixtures that were placed into previously irradiated bone. CONCLUSIONS: The success of the use of vascularized bone free flaps in restoring continuity to the mandible is clearly demonstrated in this series. There was an acceptable incidence of donor- and recipient-site complications that resulted in minimal long-term morbidity. The careful selection of a donor site(s) for oromandibular reconstruction allows for an optimal restoration of bony and soft tissue defects. Dental implants can be safely used in oromandibular reconstruction with a high level of success. Placing these implants during the initial surgery shortens the duration for achieving dental rehabilitation and enhances the success of the implants when postoperative radiotherapy is administered.     

Isolation and characterization of wheat aluminum-regulated genes: possible involvement of aluminum as a pathogenesis response elicitor

This retrospective study involved Japanese patients with prostheses supported by Br?nemark implants following maxillectomy. Questionnaires were sent to 75 institutions, and data on 19 patients were collected from 8 institutions. The mean age of patients at the time of implant placement was 64.2 years (range 22 to 82 years). The mean follow-up time was 27.6 months. Of the 81 implants placed, 16 were lost for an implant survival rate of 80.2%. The effects on implant survival rate of radiotherapy, chemotherapy, hyperbaric oxygen therapy, and the support system of the prosthesis were analyzed, but no significant differences were observed.     

Available bone is the foremost criterion in the insertion of endosteal implants

The foremost criterion in the insertion of endosteal implants is bone availability. Implant dentists should consider first the amount of available bone of the edentulous ridge where the endosteal implant will be inserted. A common error and cause of many implant failures is the dentist's use of an implant modality which is not indicated for the density and morphology of the available bone in the edentulous ridge. Implant modality/system is not the primary criterion in the insertion of endosteal implants. Before the dentist inserts an endosteal implant, he should gauge or measure the amount of bone where the implant is intended to be placed. It should be measured in width, height, length, trajectory, and implant-crown ratio. After recording the measurements of the available bone, these should be placed in different categories to serve as guides in implant selection. If there is not enough bone for the endosteal implant, bone modification should be performed. This can be done either by osteoplasty or ridge augmentation with the use of bone grafting materials. Aside from the amount of available bone in the edentulous ridge, another very, very important thing that should be considered is the quality or its density. Any biocompatible implant demonstrates some osseointegrated surfaces depending upon the bone type into which it is placed and the loads placed upon it. Implant body must exhibit a macrogeometry suitable for acceptable levels of force transfer to the surrounding tissues as well as for implantation into a bony site of a particular anatomic size.     

Comparison of position repeatability of a human operator and an industrial manipulating robot

STATEMENT OF PROBLEM: Implant-supported restorations in the partially edentulous jaw have been performed at the Mayo Clinic for more than 10 years. Clinical performance of the implants and the prostheses should be reported to ensure effectiveness of this procedure. PURPOSE: This retrospective study described results for implant survival, implant fracture rate, prosthetic complications, and design changes that may impact these results. MATERIAL AND METHODS: A retrospective chart review was conducted of all registered implant patients in a large multispecialty medical center. Patients with a partially edentulous jaw who had received endosseous implants to support and retain dental prostheses were included in this review. Implant survival and fracture, prosthetic complications, and demographic data were recorded and analyzed through Kaplan-Meier methods. RESULTS: A total of 1170 implants were placed in four anatomic locations: anterior maxilla, posterior maxilla, anterior mandible, or posterior mandible. Location of implants was shown to have no effect on implant survival (p = 0.7398), implant fracture rates (p = 0.2385), screw loosening (p = 0.8253), or screw fracture (p = 0.2737). Development of new restorative components has resulted in significantly better rates of implant survival without fracture (p = 0.0054), screw function without loosening (p < 0.0001) and screw function without fracture (p = 0.0013). Implant survival seems to have been improved with the new components (p = 0.0513). CONCLUSIONS: Implant survival in this study was independent of anatomic location of implants. Virtually all clinical performance factors were improved by design changes in implant restorative components that were brought to market in early 1991.     

Altered patterns of DNA methylation on chromosomes from leukemia cell lines: identification of 5-methylcytosines by indirect immunodetection

The feasibility of implant treatment in patients after oral ablative tumor surgery has not yet been investigated with consideration of the requisite high periodontal standards. A report on this topic has to deal not only with implant survival but also with implant health, bone response, soft tissue health, failure pattern, time of failure, and ease of restoration. For the assessment of an implant system, an overview must be accomplished that takes into account the different restorations used and their interaction with the implant system that was used. This study presents the Bone-Lock implant system (Howmedica Leibinger GmbH, Freiburg, Germany) in a retrospective investigation after 5 years of follow-up with special emphasis on the prosthetic restorations used following resection of oral malignancies. From early in 1990 through June 1996, we inserted 210 dental endosteal Bone-Lock implants (58 patients) after oral tumor resectioning. Included in the study were 45 patients with 162 implants and prosthetic restorations that had been loaded for 1 year (dentures retained by telescopic or bar-clip or ball attachments, implant-supported prostheses, tooth-to-implant connected bridges). Regular follow-up consisted of evaluation of the Plaque Index (Silness and L?e) and of the Sulcus Bleeding Index (L?e), measurements of pocket probing depth, implant mobility (by means of the Periotest method), bone resorption (according to X-ray findings), and a questionnaire that registered patient satisfaction. The results were evaluated for each restoration and were compared with baseline standards. The overall 5-year survival rate was 83.2%. For implants that had been in place for over 365 days, the survival rate was 93%. The investigation showed that after resection of oral malignancies, patients could be treated with dental implants and superstructures with long-term efficacy similar to that found in healthy subjects considering internationally accepted standards. Implant treatment in tumor patients appeared to offer the most positive periodontic results when use of bar-clip or telescope-retained overdentures was involved. The patient satisfaction level with the described prosthodontic treatment was satisfactory.     

Delayed implants in the anterior maxilla with the IMZ-implant system: a radiographical evaluation

One hundred and seventy-three IMZ-implants in 81 patients, placed in the anterior region of the maxilla, were evaluated radiographically by two observers. Radiographs were evaluated at three intervals, namely at the time of implant placement, the time of prosthetic restoration and at the latest available radiograph, on average 2 1/2 years after implant placement. In this study marginal bone height and the type of radiolucency adjacent to the implant were determined. Both observers were able to classify the marginal bone height (mesial and distal) and the distinctive type of resorptive defects to an acceptable level of agreement, with Cohen's kappa ranging between 0.48 and 0.69. It was found that, at the most recent visit to the clinic, angular-shaped resorptive defects are found mesially and/or distally of the implants at approximately 25% of the implants. At this stage 20.7% of the mesial implant sites and 27.9% of the distal implant sites show marginal bone heights less than three-quarters of the implant length. These findings do not fully underscore and sometimes even contradict the clinical observations which were considered highly satisfactory.     

Impairment, disability, and handicap in multiple sclerosis. A cross-sectional study in an incident cohort in M?re and Romsdal County, Norway

Non-submerged ITI Bonefit implants (ITI Dental Implant System) were inserted in edentulous lower jaws of 46 patients. The patients were provided with either a fixed prosthesis or an overdenture, and has been followed during a 2-year-period. At the 1-year examination, the suprastructures were removed permitting test of the individual implant stability. Radiographic examinations were performed in connection with the loading of the implants and at the 1-year examination. In total 216 implants were inserted. 4 implants were lost before loading and 4 during the 2nd year of function, which gives a survival rate after 1 year 98% and after 2 years of 96%. The mean marginal bone loss during the first year of function was 0.1 mm. However, the marginal bone changes had a high degree of variation and four implants showed a severe bone loss. The intention is to follow this patient group with annual examinations during 5 years.     

Cloning, characterization, and chromosomal localization of human superillin (SVIL)

The specific aim of this study was to determine the response of alveolar bone after it was augmented vertically using distraction osteogenesis and subsequently loaded with implant restorations. Four dogs each had four implants placed horizontally into an edentulous mandibular quadrant and, after integration, a distraction osteogenesis device was fabricated in the laboratory. An osteotomy was made to allow the crest of the alveolar ridge to be distracted vertically. After 10 mm of vertical distraction, the device was stabilized with light cured resin. Following bone fill confirmation of the distraction gap at 10 weeks, two implants were placed into the ridges, one in distracted bone and one in nondistracted bone. After 4 months for implant integration, freestanding prostheses were fabricated. Crestal bone levels were evaluated throughout the period of function. Animals were sacrificed after 1 year of loading, for histologic evaluation of the bone. The vertical ridge augmentation averaged 8.85 +/- 1.05 mm after 10 weeks of healing following distraction, without change over 1 year of implant loading. Histologic examination showed that bone had formed between the distracted segments, creating an augmented ridge. The average thickness of the labial cortex in the distraction gap was significantly thinner than the lingual cortex in distracted bone and the lingual and labial nondistracted cortical bone. The presence of the dental implant did not significantly affect cortical bone thickness. Serial sections showed that implants remained integrated and functional without soft tissue inflammation. Dental implants placed into alveolar ridges augmented with the technique of distraction osteogenesis maintained bone and were functional for the length of this study.     

Identification and characterization of a new splicing variant of vascular endothelial growth factor: VEGF183

The purpose of this study was to determine implant survival rates by means of life table analyses for a cohort of patients not part of a prospective efficacy trial and treated by practitioners at varying experience levels. Prognostic variables associated with implant failure were identified by means of proportional hazards models and advanced statistical methods that account for patient effects. Ninety-nine consecutive patients treated from 1987 to 1991 with follow-up to 1994 were included in this retrospective study. A total of 384 dental implants (79.7% Br?nemark, 19.3% IMZ plasma-sprayed, 1% IMZ hydroxyapatite-coated) were placed and subsequently supported 108 prostheses. Survival and proportional hazards modeling were used to generate Kaplan-Meier survival curves and to identify variables associated with implant failure. Survey data analysis was used to adjust for any patient effects for variables identified as significant through the proportional hazards models. Thirty-four implants failed over the follow-up period (median follow-up time 3.6 years), resulting in an overall failure rate of 8.9%. Seventeen of 99 patients experienced an implant failure. When prosthesis type was excluded from the modeling process, survey data analysis identified posterior location and an implant width of less than 4.0 mm as being associated with implant failure (all P < .05).     

Effects of molinate on growth of five freshwater species of phytoplankton

Hemiarthroplasty is one method used to treat osteoarthritic joints. Often, however, an adverse response of the articular cartilage to the metal implants occurs. The purpose of this study was to evaluate and compare the response of a surgically created defect to pyrolytic carbon and cobalt-based alloy hemiarthroplasties. The cartilage on the lateral side of the tibial plateau of a canine knee joint was abraded to create a full-thickness defect. Two small holes were drilled into the exposed subchondral bone. Next, either a carbon or metal implant was placed in the lateral femoral condyle. The implantation period was 1 year. Histologic examination of the tibial defects revealed a smooth bony surface for both implant groups. In addition, there was no evidence of a residual adverse inflammatory response nor of a significant increase in subchondral bone formation for either group. Surface cracks resulting from the presence of the implant were seen in 14% of the carbon implant specimens and in 100% of the metal implants. Fibrocartilage regeneration was seen in 86% of the carbon implants and in 25% of the metal implants. Thus the carbon appears to be better tolerated mechanically compared to wrought cobalt-chromium alloy. Pyrolytic carbon shows promise for use in hemiarthroplasty.     

Biomechanical and histologic alteration of facial recipient bone after reconstruction with autogenous bone grafts and alloplastic implants: a 1-year study

Potential alteration of the underlying recipient bone resulting from a graft or implant has significant clinical relevance. The present study was designed to evaluate the biomechanical and histologic alteration of facial recipient bone with autogenous bone graft and alloplastic implants over a 1-year period. The bilateral arches of 15 rabbits were randomized between four groups: (1) control (n = 6), subperiosteal exposure of the zygomatic arch was made; (2) onlay (n = 12), bone graft was placed as an onlay to the zygomatic arch; (3) inlay (n = 6), bone graft was placed as an inlay within the zygomatic arch; (4) implant (n = 6), a stainless steel plate was placed as an onlay to the zygomatic arch. Animals were killed 1 year after grafting. In the onlay groups, all steel implants and half of the onlay bone grafts (n = 6) were separated from the zygomatic arch; the remaining onlay bone grafts (n = 6) were left on the zygomatic arch. Three-point breaking strength was measured through the center of the graft/implant site on the zygomatic arch, followed by histologic evaluation and histometric assessment of residual bone density. The findings demonstrated no difference in the breaking strength per unit bone area between the control zygomatic arch group and the onlay group in which the bone graft was left in place. Breaking strength of the zygomatic arch in the former two groups was significantly greater than that in either group in which the onlay bone graft or implant had been removed, and was also greater than the breaking strength in that group in which inlay bone had been placed (p < 0.05). Histologic assessment showed full-thickness conversion in architecture of the zygomatic arch from compact to woven bone beneath onlays of either autogenous bone graft or steel implant; histometric assessment demonstrated an accompanying decrease in bone density in the latter groups relative to the control zygoma (p < 0.05). We conclude that onlay autogenous bone graft and alloplastic implants to the facial skeleton induce transformation of both graft and recipient bone from compact to woven architecture, accompanied by a reduction in bone density. The biomechanical strength of recipient facial bone is significantly weakened if an onlay bone graft or implant is removed. Weakening occurs per unit area of remaining bone, and is therefore independent of any thinning that may occur within the recipient bone because of graft/implant placement. These findings may impact upon decisions to augment stress-bearing regions of the facial skeleton with bone graft or implants, particularly if the graft/implant may eventually require removal.