Development of a nanocomposite of polypropylene with biocide action from silver nanoparticles

This article presents the production of films based on blends of polypropylene (PP) and modified PP with the insertion of silver nanoparticles (AgNPs) produced to generate a bactericidal effect. The 50/50 blend of PP and PP modified by irradiation in acetylene at a dose of 12.5 kGy was processed in a twin‐screw extruder. The addition of AgNPs in poly(N‐vinyl‐2‐pyrrolidone) (PVP) solution was performed during processing in the extruder. The material was characterized by ultraviolet–visible spectroscopy, scanning electron microscopy, energy‐dispersive spectroscopy, transmission electron microscopy, cytotoxicity assay, and a reduction in colony‐forming units. The PP–PVP1% AgNP film showed silver particles in the nanoscale, presented no cytotoxicity for mammalian cells, and presented antimicrobial effects against Gram‐negative Escherichia coli and Gram‐positive Staphylococcus aureus bacteria. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42218.     

Preparation and antibacterial effects of PVA‐PVP hydrogels containing silver nanoparticles

The poly(vinyl alcohol)/poly(N‐vinyl pyrrolidone) (PVA–PVP) hydrogels containing silver nanoparticles were prepared by repeated freezing–thawing treatment. The silver content in the solid composition was in the range of 0.1–1.0 wt %, the silver particle size was from 20 to 100 nm, and the weight ratio of PVA to PVP was 70 : 30. The influence of silver nanoparticles on the properties of PVA–PVP matrix was investigated by differential scanning calorimeter, infrared spectroscopy and UV–vis spectroscopy, using PVA–PVP films containing silver particles as a model. The morphology of freeze‐dried PVA–PVP hydrogel matrix and dispersion of the silver nanoparticles in the matrix was examined by scanning electron microscopy. It was found that a three‐dimensional structure was formed during the process of freezing–thawing treatment and no serious aggregation of the silver nanoparticles occurred. Water absorption properties, release of silver ions from the hydrogels and the antibacterial effects of the hydrogels against Escherichia coli and Staphylococcus aureus were examined too. It was proved that the nanosilver‐containing hydrogels had an excellent antibacterial ability. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 125–133, 2007     

Silver/poly(N‐vinyl‐2‐pyrrolidone) hydrogel nanocomposites obtained by electrochemical synthesis of silver nanoparticles inside the polymer hydrogel aimed for biomedical applications

Silver nanoparticles were produced inside a poly(N‐vinyl‐2‐pyrrolidone) hydrogel (PVP) by an innovative method based on the electrochemical reduction of Ag⁺ ions within the swollen PVP hydrogel. UV‐visible spectroscopy showed the highest value of the absorbance intensity and the lowest values of the wavelength of the absorbance maximum and the full width at the half‐maximum absorbance for the Ag/PVP nanocomposite obtained at 200 V during 4 min. Cyclic voltammetry results suggested an adequate entrapment of the silver nanoparticles. The mechanical properties under bioreactor conditions of the Ag/PVP nanocomposite suggested the possibility of wound dressing application. Silver release from Ag/PVP nanocomposites was confirmed under static conditions as well as by their antimicrobial activity against Staphylococcus aureus. POLYM. COMPOS., 35:217–226, 2014. © 2013 Society of Plastics Engineers     

Structural insights into a novel molecular‐scale composite of soluble poly(vinyl pyrrolidone) supporting uniformly dispersed nanoscale poly(vinyl pyrrolidone) particles

Structural insights into a novel, molecular‐composite poly(vinyl pyrrolidone) consisting of a soluble, film‐forming poly(vinyl pyrrolidone) (PVP) polymer and in situ formed, minute, crosslinked, nanoscale, insoluble poly [poly(vinyl pyrrolidone)] (PPVP) polymer particles are reported. A technique for determining the PVP molecular weight and PPVP weight fraction by gel permeation chromatography/multi‐angle light scattering (MALS) is described. Particle size studies by quasi‐elastic light scattering and field flow fractionation/MALS demonstrate that the nanoscale, insoluble polymer particles are nominally 370 and 325 nm in diameter, respectively. Rheological experiments on this dispersed system yield a complex macroscopic behavior. Atomic force microscopy images confirm a substantial heterogeneous nature for a film cast from this molecular‐composite material. Finally, this polymeric molecular composite in film form exhibits, among many other interesting properties, a dramatic enhancement in water resistance, as demonstrated by a simple image water resistance test for an ink‐jet printing application. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 734–741, 2003     

Preparation and characterization of poly(L‐lactide) membranes prepared by γ‐radiation‐induced grafting of N‐vinyl pyrrolidone

A copolymer, poly(L ‐lactide)‐g‐poly(N‐vinyl pyrrolidone) (PLLA‐g‐PVP) was prepared with poly(L ‐lactide) (PLLA) and N‐vinyl pyrrolidone in the presence of methanol as a solvent by γ‐ray irradiation. The structure of PLLA‐g‐PVP was characterized by ¹H‐NMR and Fourier transform infrared spectroscopy. The PLLA‐g‐PVP graft ratio calculated by the percentage increase in weight increased with the increase of absorbed dose, and the percentage crystallinity of PLLA‐g‐PVP decreased with increasing graft ratio. The introduction of the poly(N‐vinyl pyrrolidone) chain into PLLA resulted in a decrease in the contact angle of PLLA‐g‐PVP with increasing graft ratio. In vitro degradation testing showed that PLLA‐g‐PVP had a higher degradation rate both in the weight‐loss test and molecular weight measurement because of a lower crystalline percentage and higher hydrophilicity compared to PLLA. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ab initio emulsion RAFT polymerization of vinylidene chloride mediated by amphiphilic macro‐RAFT agents

An amphiphilic copolymer poly(acrylic acid)‐block‐poly(styrene) (PAA‐b‐PS) with a trithiocarbonate reactive group was used in the ab initio reversible addition‐fragmentation chain transfer (RAFT) emulsion polymerization of vinylidene chloride (VDC). The fast polymerization and high conversion were achieved. The parameters for a good control over the formation of well‐defined PAA‐b‐PS‐b‐PVDC amphiphilic block copolymers and self‐stabilized latexes were identified. To improve the emulsion stability and prevent the desorption of water‐soluble initiating radicals, the acid groups of PAA‐b‐PS were neutralized by NaOH at the later stage of polymerization. The PAA‐b‐PS‐b‐PVDC block copolymer with a high molar mass of 30 kg mol⁻¹ and the stable latex with 30 wt % solid content was obtained. The kinetics of RAFT emulsion copolymerization of VDC in a living manner was first investigated. The as‐prepared PAA‐b‐PS‐b‐PVDC latex particles were further used as seeds in the emulsion polymerization of styrene, enabling the preparation of novel PAA‐b‐PS‐b‐PVDC‐b‐PS tetra‐block copolymers with a molar mass of 76 kg mol⁻¹ and a relatively low molecular weight distribution of 1.6. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40391.     

CMC and dynamic properties of poly(VA-<Emphasis Type="Italic">b</Emphasis>-St) copolymer micelles for drug delivery

The polymeric micelles from amphiphilic block copolymer poly(vinyl alcohol-b-styrene) (poly(VA-b-St)) with different syndiotacticity of poly(vinyl alcohol) (PVA) block were prepared by dialysis against water. Critical micelle concentration (CMC) and dynamic properties of poly(VA-b-St) copolymeric micelles were investigated by fluorescence techniques. From the fluorescence emission spectrum measurements using pyrene as a fluorescence probe, the observed CMC value was in the range of 0.125–4.47 mg/L. The CMC value increased with decreasing the weight ratio of PS to PVA block and with increasing the syndiotacticity of PVA block. The rate of pyrene release was very slow for block copolymers containing PVA block with higher syndiotacticity, which indicates that their micelles have increased kinetic stability. This work was presented at 13 ^th YABEC symposium held at Seoul, Korea, October 20–22, 2007.     

Nanophase morphology and crystallization in poly(vinylidene fluoride)/polydimethylsiloxane‐block‐poly(methyl methacrylate)‐block‐polystyrene blends

An approach to achieve confined crystallization of ferroelectric semicrystalline poly(vinylidene fluoride) (PVDF) was investigated. A novel polydimethylsiloxane‐block‐poly(methyl methacrylate)‐block‐polystyrene (PDMS‐b‐PMMA‐b‐PS) triblock copolymer was synthesized by the atom‐transfer radical polymerization method and blended with PVDF. Miscibility, crystallization and morphology of the PVDF/PDMS‐b‐PMMA‐b‐PS blends were studied within the whole range of concentration. In this A‐b‐B‐b‐C/D type of triblock copolymer/homopolymer system, crystallizable PVDF (D) and PMMA (B) middle block are miscible because of specific intermolecular interactions while A block (PDMS) and C block (PS) are immiscible with PVDF. Nanostructured morphology is formed via self‐assembly, displaying a variety of phase structures and semicrystalline morphologies. Crystallization at 145 °C reveals that both α and β crystalline phases of PVDF are present in PVDF/PDMS‐b‐PMMA‐b‐PS blends. Incorporation of the triblock copolymer decreases the degree of crystallization and enhances the proportion of β to α phase of semicrystalline PVDF. Introduction of PDMS‐b‐PMMA‐b‐PS triblock copolymer to PVDF makes the crystalline structures compact and confines the crystal size. Moreover, small‐angle X‐ray scattering results indicate that the immiscible PDMS as a soft block and PS as a hard block are localized in PVDF crystalline structures. © 2019 Society of Chemical Industry     

Nanostructured thermosets from self‐assembled amphiphilic block copolymer/epoxy resin mixtures: effect of copolymer content on nanostructures

Nanostructure formation in thermosets can allow the design of materials with interesting properties. The aim of this work was to obtain a nanostructured epoxy system by self‐assembly of an amphiphilic diblock copolymer in an unreacted epoxy/amine mixture followed by curing of the matrix. The copolymer employed was polystyrene‐block‐poly(methyl methacrylate) (PS‐b‐PMMA). The thermoset system, formed by a diglycidyl ether of bisphenol A‐type epoxy resin and diaminodiphenylmethane hardener, was chosen to ensure the miscibility of most of the PMMA block until matrix gelation. Transparent materials with microphase‐separated domains were obtained for copolymer contents lower than 40 wt%. In systems containing 20 and 30 wt% block copolymer, the PS block formed spherical micelles or worm‐like structures before curing, which were stabilized through curing by the more compatible PMMA block phase. Nanostructured thermoset systems were successfully synthesized for self‐assembled amphiphilic block copolymer–epoxy/amine mixtures for copolymer contents lower than 40 wt%. Copyright © 2009 Society of Chemical Industry     

Stabilization of CO2‐in‐water emulsions with high internal phase volume using PVAc‐b‐PVP and PVP‐b‐PVAc‐b‐PVP as emulsifying agents

Two newly‐designed hydrocarbon surfactants, that is, poly(vinyl acetate)‐block‐poly(1‐vinyl‐2‐pyrrolidone) (PVAc‐b‐PVP) and PVP‐b‐PVAc‐b‐PVP, were synthesized using reversible addition–fragmentation chain transfer polymerization and used to form CO₂/water (C/W) emulsions with high internal phase volume and good stability against flocculation and coalescence up to 60 h. Their structures were precisely determined by nuclear magnetic resonance, gel permeation chromatography, thermal gravimetric analysis, and differential scanning calorimetry. Besides low temperature and high CO₂ pressure, the surfactant structures were the key factors affecting the formation and stability of high internal phase C/W emulsions, including the polymerization degrees of CO₂‐philic block (PVAc) and hydrophilic block (PVP), as well as the number of hydrophilic tail. The surface tension of the surfactant aqueous solution and the apparent viscosity of the C/W emulsions were also measured to characterize the surfactants efficiency and effectiveness. The surfactants with double hydrophilic tails showed stronger emulsifying ability than those with single hydrophilic tail. The great enhancement of the emulsions stability was due to decrease of the interface tension as well as increase of the steric hindrance in the water lamellae, preventing a frequent collision of CO₂ droplets and their fast coalescence. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46351.     

A novel method for preparing silver/poly(siloxane‐b‐methyl methacrylate) nanocomposites with multiple properties in the DMF‐toluene mixture solvent

A novel method for preparing silver/poly(siloxane‐b‐methyl methacrylate) (Ag/(PDMS‐b‐PMMA)) hybrid nanocomposites was proposed by using the siloxane‐containing block copolymers as stabilizer. The reduction of silver nitrate (AgNO₃) was performed in the mixture solvent of dimethyl formamide (DMF) and toluene, which was used to dissolve double‐hydrophobic copolymer, as well as served as the powerful reductant. The presence of the PMMA block in the copolymer indeed exerted as capping ligands for nanoparticles. The resultant nanocomposites exhibited super hydrophobicity with water contact angle of 123.3^° and the thermogravimetry analysis (TGA) revealed that the resultant nanocomposites with more PDMS were more heat‐resisting. Besides, the antimicrobial efficiency of the most desirable nanocomposite (Ag/PDMS₆₅‐b‐PMMA₃₀ loaded with 7.3% silver nanoparticle) could reach up to 99.4% when contacting with escherichia coli within 120 min. As a whole, the resultant nanocomposites by the integration of excellent properties of silver nanoparticles as well as siloxane‐block copolymers can be a promising for the development of materials with hydrophobic, heat‐resisting and outstanding antibacterial properties from the chemical product engineering viewpoint. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4780–4793, 2013     

Thin Film Nanocomposites Based on SBM Triblock Copolymer and Silver Nanoparticles: Morphological and Dielectric Analysis

Hybrid organic/inorganic thin film nanocomposites based on poly(styrene)‐b‐poly(butadiene)‐b‐poly(methyl methacrylate) triblock copolymer and silver nanoparticles are prepared and characterized. In order to improve the compatibility of nanoparticles with the polymeric matrix, their surface is modified with dodecanethiol surfactant, which enables a good dispersion of nanoparticles through the triblock copolymer, without the formation of aggregates. By atomic force microscopy (AFM), the dispersion level of nanoparticles is analyzed, together with their effect on the thin film surface morphology, for nanocomposites up to 15 wt% of nanoparticles. Dielectric properties of nanocomposites are studied by dielectric relaxation spectroscopy (DRS), analyzing the effect of nanoparticles on dielectric properties. Even if conductivity and permittivity of composites increase with nanoparticle content, percolation threshold is found to be at around 15% in volume. Morphologically analyzed nanocomposites are, in this way, below the threshold.     

Electrical conductivity of LTA‐zeolite in the presence of poly(vinyl alcohol) and poly(vinyl pyrrolidone) polymers

In this work we studied the electrical behavior of Linde type A zeolite (K⁺) in the presence of two polymers, poly(vinyl alcohol) (PVA) and poly(vinyl pyrrolidone) (PVP), with excellent film forming properties. Homogeneous composite thin films of PVA/LTA‐zeolite and PVP/LTA‐zeolite were prepared with different zeolite concentrations. The current?voltage (I?V) characteristics of the composites were measured at different applied voltages. The results show that the conductivity properties are composition‐ratio‐dependent and are also related to the type of polymers. Moreover, a well‐defined step‐like change was detected in the I?V curve of PVP/LTA‐zeolite at very high applied voltage. © 2013 Society of Chemical Industry     

Thiol–ene addition enables tailored synthesis of poly(2‐oxazoline)‐graft‐poly(vinyl pyrrolidone) copolymers for binder jetting 3D printing

The continued interest in graft copolymer architectures arises from their unique solution properties and potential for a myriad of applications ranging from drug delivery to adhesives. Poly(vinyl pyrrolidone) (PVP) represents a popular amorphous, water‐soluble polymer used as a polymeric binder in binder jetting additive manufacturing, as fillers in cosmetic products, and for subcutaneous drug delivery systems. This report describes the synthesis of poly(2‐oxazoline) and PVP graft copolymers using a ‘grafting to’ methodology with an efficient thiol–ene ‘click’ reaction. Copolymerization of 2‐methyl‐2‐oxazoline and 2‐(3‐butenyl)‐2‐oxazoline introduced pendent vinyl grafting sites with a predictable absolute number‐average molecular weight. In parallel, reversible addition‐fragmentation chain‐transfer polymerization and subsequent aminolysis yielded well‐defined, oligomeric, thiol‐terminated PVP. Thiol–ene click chemistry enabled the formation of poly(2‐oxazoline)‐graft‐poly(vinyl pyrrolidone) (PMeOx‐g‐PVP) copolymers with varying mole percent grafting sites and PVP graft length. ¹H NMR spectroscopy, aqueous SEC with multiangle light scattering (SEC‐MALS), and bromine titrations confirmed chemical structure, and DSC with TGA elucidated thermal transitions. Aqueous SEC‐MALS and ¹H NMR spectroscopy also determined absolute number‐ and weight‐average molecular weights and average grafting levels, which revealed optimal reaction conditions. Zero‐shear viscosities of 5 and 10 wt% solutions in deionized water for each graft copolymer compared to their linear analogs demonstrated a significant (ca 31%) decrease in viscosity at the same number‐average molecular weight. This decrease in solution viscosity suggested PMeOx‐g‐PVP copolymers as exceptional alternatives to linear analogs for aqueous‐based, binder jetting additive manufacturing.     

Triblock copolymers of methyl methacrylate/N‐vinyl pyrrolidone and their hydrophilication effects on poly(vinylidene fluoride) porous membranes

The new amphiphilic triblock copolymers of poly(N‐vinyl pyrrolidone‐b‐methyl methacrylate‐b‐N‐vinyl pyrrolidone) (P(VP‐b‐MMA‐b‐VP)) were synthesized via a reversible addition fragmentation chain transfer polymerization route. Using these copolymers as additives in casting solutions, the porous blend membranes of poly (vinylidene fluoride) and P(VP‐b‐MMA‐b‐VP) were prepared following a typical nonsolvent induced phase separation process. The influences of P(VP‐b‐MMA‐b‐VP) on the morphologies of the blend membranes were observed by scanning electron microscopy. The chemical compositions in membrane surface layers were measured by X‐ray photoelectron measurement. Water contact angle and water flux experiments were used to evaluate the hydrophilicity and permeation properties of the blend membranes. It was found that the P(VP‐b‐MMA‐b‐VP) copolymers could be retained in membrane stably in membrane formation and application process. The copolymers could enrich in surface layer and endowed the blend membrane with efficient hydrophilicity and higher water permeation flux. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Morphology of poly(styrene‐block‐dimethylsiloxane) copolymer films

The morphologies of poly(styrene‐block‐di‐methylsiloxane) (PS‐b‐PDMS) copolymer thin films were analyzed via atomic force microscopy and transition electron microscopy (TEM). The asymmetric copolymer thin films spin‐cast from toluene onto mica presented meshlike structures, which were different from the spherical structures from TEM measurements. The annealing temperature affected the surface morphology of the PS‐b‐PDMS copolymer thin films; the polydimethylsiloxane (PDMS) phases at the surface were increased when the annealing temperature was higher than the PDMS glass‐transition temperature. The morphologies of the PS‐b‐PDMS copolymer thin films were different from solvent to solvent; for thin films spin‐cast from toluene, the polystyrene (PS) phase appeared as pits in the PDMS matrix, whereas the thin films spin‐cast from cyclohexane solutions exhibited an islandlike structure and small, separated PS phases as protrusions over the macroscopically flat surface. The microphase structure of the PS‐b‐PDMS copolymer thin films was also strongly influenced by the different substrates; for an asymmetric block copolymer thin film, the PDMS and PS phases on a silicon substrate presented a lamellar structure parallel to the surface at intervals. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1010–1018, 2007     

Thermal and mechanical properties of nanocomposites based on a PLLA‐b‐PEO‐b‐PLLA triblock copolymer and nanohydroxyapatite

Composites which combine biocompatible polymers and hydroxyapatite are unique materials with regards to their mechanical properties and bioactivity in the development of temporary bone‐fixation devices. Nanocomposites based on a biocompatible and amphiphilic triblock copolymer of poly(l‐ lactide) (PLLA) and poly(ethylene oxide) (PEO) —PLLA‐b‐PEO‐b‐PLLA— and neat (nHAp) or PEO‐modified (nHAp@PEO) hydroxyapatite nanoparticles were prepared by dispersion in benzene solutions, followed by freeze‐drying and injection moulding processes. The morphology of the copolymers of a PEO block dispersed throughout a PLLA matrix was not changed with addition of the nanofillers. The nHAp particles were spherical and, after modification, the nHAp@PEO nanoparticles were partially agglomerated. In the nanocomposites, these particles characteristics remained unchanged, and the nHAp particles and nHAp@PEO agglomerates were uniformly dispersed through the copolymer matrix. These particles acted as nucleating agents, with nHAp@PEO being more efficient. The incorporation of nHAp increased both the reduced elastic modulus (～22%) and the indentation hardness (～15%) in comparison to the copolymer matrix, as determined by nanoindentation tests, while nHAp@PEO addition resulted in lower increments of these mechanical parameters. The incorporation of untreated nHAp was, therefore, more beneficial with regards to the mechanical properties, since the amphiphilic PLLA‐b‐PEO‐b‐PLLA matrix was already efficient for nHAp nanoparticles dispersion. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44187.     

Synthesis,characterization, and application of novel amphiphilic poly(D‐gluconamidoethyl methacrylate)‐b‐polyurethane‐b‐ poly(D‐gluconamidoethyl methacrylate) triblock copolymers

Novel amphiphilic ABA‐type poly(D ‐gluconamidoethyl methacrylate)‐b‐polyurethane‐b‐poly(D ‐gluconamidoethyl methacrylate) (PGAMA‐b‐PU‐b‐PGAMA) tri‐block copolymers were successfully synthesized via the combination of the step‐growth and copper‐catalyzed atom transfer radical polymerization (ATRP). Dihydroxy polyurethane (HO‐PU‐OH) was synthesized by the step‐growth polymerization of hexamethylene diisocyanate with poly(tetramethylene glycol). PGAMA‐b‐PU‐b‐PGAMA block copolymers were synthesized via copper‐catalyzed ATRP of GAMA in N, N‐dimethyl formamide at 20°C in the presence of 2, 2′‐bipyridyl using Br‐PU‐Br as macroinitiator and characterized by ¹H‐NMR spectroscopy and GPC. The resulting block copolymer forms spherical micelles in water as observed in TEM study, and also supported by ¹H NMR spectroscopy and light scattering. Miceller size increases with increase in hydrophilic PGAMA chain length as revealed by DLS study. The critical micellar concentration values of the resulting block copolymers increased with the increase of the chain length of the PGAMA block. Thermal properties of these block copolymers were studied by thermo‐gravimetric analysis, and differential scanning calorimetric study. Spherical Ag‐nanoparticles were successfully synthesized using these block copolymers as stabilizer. The dimension of Ag nanoparticle was tailored by altering the chain length of the hydrophilic block of the copolymer. A mechanism has been proposed for the formation of stable and regulated Ag nanoparticle using various chain length of hydrophilic PGAMA block of the tri‐block copolymer. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

A Viscometric Study of the Miscibility Behaviour of Poly(N-Vinyl Pyrrolidone) Blends

The miscibility behaviour of blends of poly(N-vinyl pyrrolidone) (PVP) with poly(vinyl chloride) (PVC), poly(vinyl acetate) (PVAc) and vinyl chloride–vinyl acetate (VCVAc) copolymer has been investigated on the basis of a viscometric approach. PVP is found to be miscible with PVC over the entire composition range, as is evident from the high values observed for the intrinsic viscosity of transfer. This is further supported by the single glass transition temperature observed in differential scanning calorimetry studies of the blend films. Blends of PVP with VCVAc copolymer exhibit microphase separation which is shown clearly in the scanning electron micrographs of the films. PVAc/PVP blends show interaction only at low PVAc contents, but in general are immiscible. © of SCI.     

Amphiphilic copolymers based on PEG‐acrylate as surface active water viscosifiers: Towards new potential systems for enhanced oil recovery

With the purpose of investigating new potential candidates for enhanced oil recovery (EOR), amphiphilic copolymers based on Poly(ethylene glycol) methyl ether acrylate (PEGA) have been prepared by Atom Transfer Radical Polymerization (ATRP). A P(PEGA) homopolymer, a block copolymer with styrene PS‐b‐P(PEGA), and an analogous terpolymer including also sodium methacrylate (MANa) in the poly(PEGA) (PPEGA) block, PS‐b‐P(PEGA‐co‐MANa) have been prepared and characterized. Viscosity and surface activity of solutions of the prepared polymers in pure and salty water have been measured and the results have been interpreted in terms of the chemical structures of the systems. A clear influence of the presence of the charged MANa moieties has been observed in both rheological and interfacial properties. The PS‐b‐P(PEGA‐co‐MANa) terpolymer, being an effective surface active viscosifying agent, is a good candidate as polymeric surfactant for applications in enhanced oil recovery and related. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44100.