SHS Metallurgy of Composite Materials Based on the Nb–Si System

Composite materials (CMs) based on niobium with functional and alloying additives (Si, Hf, Ti, Al, etc.) have prospects for industrial approval in aviation propulsion engineering. The authors previously showed that such CMs can be synthesized in an autowave mode (combustion mode) using highly exothermic mixtures of Nb₂O₅ with Al, Si, Hf, and Ti. It was found that hafnium actively participates in the reduction of Nb₂O₅, which complicates its introduction into the CM. This study is directed at investigating the possibility to synthesize Nb-based composite materials with a high Hf content using methods of centrifugal SHS metallurgy. It is shown in experimental investigations using a centrifugal installation under the effect of acceleration of 40 g that the replacement of active Hf by its less active compounds Hf–Al or Hf–Ti–Si–Al in the composition of the Nb₂O₅/Al mixtures makes it possible to transfer the combustion of the mixture from the explosion-like mode into the steady-state combustion mode. The content of Hf in the CM increases with an increase in the size of Hf–Al granules from 0–40 to 160–300 μm from 1.3 to 3.8 wt %. The introduction of Hf–Ti–Si–Al granules with a particle size from 1 to 3 mm into the initial charge makes it possible to form cast CMs based on niobium silicides with a Hf content up to 8.1 wt %. The integral composition and distribution of base and impurity elements in structure components of cast CMs, as well as their phase composition, were determined using electron microscopy and X-ray phase analysis. CMs with the maximal Hf content (8.1 wt %) contain three structural components: (1) the base, which includes Nb, Si, and Ti; (2) intergrain boundaries containing Nb, Ti, and Al; and (3) inclusions based on hafnium oxide. Three phases are revealed in the X-ray diffraction pattern of the CM, notably, solid solutions based on Nb and Nb5Si3, as well as a minor amount of Nb₃Si.     

Cerium Effect on the Phase Composition and Crystallization Behavior of Aluminum Casting Alloys Based on the Al–Mg–Si System

Russian Journal of Non-Ferrous Metals - Using a Thermo-Calc software package (TCAl4.0 database), unexplored data concerning the phase composition and crystallization behavior of...     

Peculiarities of Granulation of the PAP-2 Aluminum Powder in the Technology of the Al–Al2O3 Powder Composite with a Layered Structure

Russian Journal of Non-Ferrous Metals - An analysis of modern scientific-and-technical information evidences great prospects for using composite materials (CMs) based on the Al–Al2O3 system....     

Aluminum-Matrix Natural Composite Material Based on the Al–Ca–Ni–La–Fe System

Russian Journal of Non-Ferrous Metals - The primary crystallization concentration region of the aluminum solid solution (Al) is refined using computational analysis in the Thermo-Calc program,...     

Vacuum Induction Furnace Melting Technology for High-Temperature Composite Material Based on Nb–Si System

Metallurgist - FGUP VIAM has developed technology for melting high-temperature composite material based on the Nb–Si system by vacuum induction melting in a ceramic crucible based on yttrium...     

Mechanical and Tribological Behavior of Powder Metallurgy Processed Aluminum–Graphite Composite

Russian Journal of Non-Ferrous Metals - In this research, the mechanical and tribological behavior of aluminum–graphite (Al–Gr) composite has been investigated in order to determine the...     

Thermodynamic Assessment of the Mg–Ni–Si System

Powder Metallurgy and Metal Ceramics - The thermodynamic assessment of the Mg–Ni–Si system has been developed in the framework of the CALPHAD method. The critical review of the...     

Study of the Structure and Properties of Cermets Based on the NiAl–Al2O3 System

Russian Journal of Non-Ferrous Metals - The powder metallurgy method, including the mechanical activation of powders in a planetary mill and spark plasma sintering at 1470°C in an inert...     

Macrostructure and Strength of the Al–Zn–Sn Composite Produced by Liquid-Phase Sintering of the Al–Zn Alloy and Pure Tin Powder Mixture

Russian Journal of Non-Ferrous Metals - Features of liquid-phase sintering compacts made of powders of the Al–10Zn alloy and tin of the PO 2 brand, as well as the influence of sintering modes...     

Development and Application Prospects of Aluminum–Lithium Alloys in Aircraft and Space Technology

Metallurgist - New models of competitive aviation and space technology cannot be created without contemporary materials. The development of aluminum–lithium alloys was mainly determined by...     

Applying SHS for the Fabrication of the Ti3SiC2–Ni Composite

Russian Journal of Non-Ferrous Metals - The results of applying self-propagating high-temperature synthesis (SHS) for fabricating high-temperature nickel alloys and composites based on titanium...